commit old git move

13 files changed, 0 insertions, 269 deletions

diff --git a/README b/README
deleted file mode 100644
index 00e6343..0000000
--- a/README
+++ /dev/null
@@ -1,34 +0,0 @@
-A very basic project template for Verilog simulation and synthesis using Isim
-and Xilinx tools. Adapted from an actual project, so there is likely a bit of
-unecessary flags and switches on certain commands. I have done my best to remove
-everything a can where things will still build.
-
-Build a bitstream (to upload to an FPGA, preconfigured as Spartan 6 chip in one
-of the conf files) via:
-
-.synth_project/make.sh
-
-the toplevel ucf (constraints mapping netlist objects from the verilog
-compilation to hardware resources, and place and routing and timing constraints)
-is:
-./synth_project/project.ucf
-
-the toplevel verilog module, which does nothing (just sets some pins to zero)
-lives in:
-./hdl/project.v
-
-
-Simulate with isim via:
-
-./testbench/fuse.sh
-./testbench/simulate_isim -gui
-
-
-In isim, you can open the "signals.wcfg" in the file menu to reload a the logic
-analyzer configuration. This cfg file will not be valid if you delete any
-signals from your design that are saves in the wcfg.
-
-./testbench/tb.v  is the toplevel testbench file for simulation.
-
-
-Please improve and push!
\ No newline at end of file
diff --git a/hdl/project.v b/hdl/project.v
deleted file mode 100644
index 753597b..0000000
--- a/hdl/project.v
+++ /dev/null
@@ -1,26 +0,0 @@
-module project
-   (
-    output wire LED_output_0,
-    output wire LED_output_1,
-    output wire LED_output_2,
-    output wire LED_output_3,
-    output wire LED_output_4,
-    output wire LED_output_5,
-    output wire LED_output_6,
-    input wire 	Switch_input_0,
-    input wire 	Switch_input_1,
-    input wire 	Switch_input_2,
-    input wire 	Switch_input_3,
-    input wire 	SYSTEMCLOCK,
-    input wire 	PUSH_BUTTON_RESET_RAW //Xilinx GTP - this is active low-
-    );
-
-   assign LED_output_0 = 1'b0;
-   assign LED_output_1 = 1'b0;
-   assign LED_output_2 = 1'b0;
-   assign LED_output_3 = 1'b0;
-   assign LED_output_4 = 1'b0;
-   assign LED_output_5 = 1'b0;
-   assign LED_output_6 = 1'b0;
-
-endmodule
\ No newline at end of file
diff --git a/synth_project/make.sh b/synth_project/make.sh
deleted file mode 100755
index 174a6ac..0000000
--- a/synth_project/make.sh
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/sh -e
-
-TOP_NAME=project
-xst -ifn $TOP_NAME.xst
-ngdbuild $TOP_NAME.ngc -verbose
-map -pr b -w -detail $TOP_NAME.ngd
-par -w $TOP_NAME $TOP_NAME.ncd
-bitgen -w $TOP_NAME.ncd
-
diff --git a/synth_project/project.lso b/synth_project/project.lso
deleted file mode 100755
index a340c10..0000000
--- a/synth_project/project.lso
+++ /dev/null
@@ -1 +0,0 @@
-work
\ No newline at end of file
diff --git a/synth_project/project.prj b/synth_project/project.prj
deleted file mode 100644
index 3262aa0..0000000
--- a/synth_project/project.prj
+++ /dev/null
@@ -1 +0,0 @@
- verilog work ../hdl/project.v
diff --git a/synth_project/project.srp b/synth_project/project.srp
deleted file mode 100644
index 3a35165..0000000
--- a/synth_project/project.srp
+++ /dev/null
@@ -1,32 +0,0 @@
-Release 14.3 - xst P.40xd (lin64)
-Copyright (c) 1995-2012 Xilinx, Inc.  All rights reserved.
---> 
-Parameter TMPDIR set to ./xst/projnav.tmp
-
-
-Total REAL time to Xst completion: 0.00 secs
-Total CPU time to Xst completion: 0.06 secs
- 
---> 
-Parameter xsthdpdir set to ./xst
-
-
-Total REAL time to Xst completion: 0.00 secs
-Total CPU time to Xst completion: 0.06 secs
- 
---> 
-ERROR:Xst:438 - Can not open file : proejct.prj
-
-
-Total REAL time to Xst completion: 0.00 secs
-Total CPU time to Xst completion: 0.08 secs
- 
---> 
-
-
-Total memory usage is 284024 kilobytes
-
-Number of errors   :    1 (   0 filtered)
-Number of warnings :    0 (   0 filtered)
-Number of infos    :    0 (   0 filtered)
-
diff --git a/synth_project/project.ucf b/synth_project/project.ucf
deleted file mode 100755
index 322c05a..0000000
--- a/synth_project/project.ucf
+++ /dev/null
@@ -1,21 +0,0 @@
-NET "PUSH_BUTTON_RESET_RAW" LOC = F3;
-
-#100MHz clock
-NET "SYSTEMCLOCK" LOC = K21;
-
-NET "Switch_input_0" LOC = C18;
-NET "Switch_input_1" LOC = Y6;
-NET "Switch_input_2" LOC = W6;
-NET "Switch_input_3" LOC = E4;
-
-NET "LED_output_1" LOC = D17;
-NET "LED_output_2" LOC = AB4;
-NET "LED_output_4" LOC = D21;
-NET "LED_output_5" LOC = W15;
-
-# Defines the external differential clock to be 150 MHz with 50% duty
-# cycle.
-
-NET "SYSTEMCLOCK" TNM_NET = "SYSTEMCLOCK";
-TIMESPEC TS__SYSTEMCLOCK = PERIOD "SYSTEMCLOCK" 5 ns HIGH 50 % PRIORITY 2;
-
diff --git a/synth_project/project.xst b/synth_project/project.xst
deleted file mode 100644
index 9a29456..0000000
--- a/synth_project/project.xst
+++ /dev/null
@@ -1,53 +0,0 @@
-set -tmpdir "./xst/projnav.tmp"
-set -xsthdpdir "./xst"
-run
--ifn project.prj
--ifmt mixed
--ofn project
--ofmt NGC
--p xc6slx45t-3-fgg484
--top project
--lso project.lso
--opt_mode Speed
--opt_level 1
--power NO
--iuc NO
--netlist_hierarchy rebuilt
--rtlview Yes
--glob_opt AllClockNets
--read_cores YES
--write_timing_constraints YES
--cross_clock_analysis NO
--hierarchy_separator /
--bus_delimiter <>
--case maintain
--slice_utilization_ratio 100
--bram_utilization_ratio 100
--dsp_utilization_ratio 100
--lc auto
--reduce_control_sets auto
--fsm_extract YES -fsm_encoding Auto
--safe_implementation No
--fsm_style lut
--ram_extract Yes
--ram_style Auto
--rom_extract Yes
--shreg_extract YES
--rom_style Auto
--auto_bram_packing NO
--resource_sharing YES
--async_to_sync NO
--use_dsp48 auto
-# use NO for making NGC's and YES for making bitstreams
--iobuf YES
--max_fanout 100000
--bufg 32
--register_duplication YES
--register_balancing No
--optimize_primitives NO
--use_clock_enable Auto
--use_sync_set Auto
--use_sync_reset Auto
--iob auto
--equivalent_register_removal YES
--slice_utilization_ratio_maxmargin 5
\ No newline at end of file
diff --git a/testbench/fuse.sh b/testbench/fuse.sh
deleted file mode 100755
index ad08c93..0000000
--- a/testbench/fuse.sh
+++ /dev/null
@@ -1,2 +0,0 @@
-vlogcomp -prj simulate_isim.prj
-fuse -lib unisims_ver -lib secureip -lib xilinxcorelib_ver -lib unimacro_ver -lib iplib=./iplib -lib unenclib -o simulate_isim.exe unenclib.tb unenclib.glbl
diff --git a/testbench/signals.wcfg b/testbench/signals.wcfg
deleted file mode 100644
index dbb5e1a..0000000
--- a/testbench/signals.wcfg
+++ /dev/null
@@ -1,42 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<wave_config>
-   <wave_state>
-   </wave_state>
-   <db_ref_list>
-      <db_ref path="./isim.wdb" id="1" type="auto">
-         <top_modules>
-            <top_module name="glbl" />
-            <top_module name="tb" />
-         </top_modules>
-      </db_ref>
-   </db_ref_list>
-   <WVObjectSize size="7" />
-   <wvobject fp_name="/tb/project_i/LED_output_2" type="logic" db_ref_id="1">
-      <obj_property name="ElementShortName">LED_output_2</obj_property>
-      <obj_property name="ObjectShortName">LED_output_2</obj_property>
-   </wvobject>
-   <wvobject fp_name="/tb/project_i/Switch_input_0" type="logic" db_ref_id="1">
-      <obj_property name="ElementShortName">Switch_input_0</obj_property>
-      <obj_property name="ObjectShortName">Switch_input_0</obj_property>
-   </wvobject>
-   <wvobject fp_name="/tb/project_i/Switch_input_1" type="logic" db_ref_id="1">
-      <obj_property name="ElementShortName">Switch_input_1</obj_property>
-      <obj_property name="ObjectShortName">Switch_input_1</obj_property>
-   </wvobject>
-   <wvobject fp_name="/tb/project_i/Switch_input_2" type="logic" db_ref_id="1">
-      <obj_property name="ElementShortName">Switch_input_2</obj_property>
-      <obj_property name="ObjectShortName">Switch_input_2</obj_property>
-   </wvobject>
-   <wvobject fp_name="/tb/project_i/Switch_input_3" type="logic" db_ref_id="1">
-      <obj_property name="ElementShortName">Switch_input_3</obj_property>
-      <obj_property name="ObjectShortName">Switch_input_3</obj_property>
-   </wvobject>
-   <wvobject fp_name="/tb/project_i/SYSTEMCLOCK" type="logic" db_ref_id="1">
-      <obj_property name="ElementShortName">SYSTEMCLOCK</obj_property>
-      <obj_property name="ObjectShortName">SYSTEMCLOCK</obj_property>
-   </wvobject>
-   <wvobject fp_name="/tb/project_i/PUSH_BUTTON_RESET_RAW" type="logic" db_ref_id="1">
-      <obj_property name="ElementShortName">PUSH_BUTTON_RESET_RAW</obj_property>
-      <obj_property name="ObjectShortName">PUSH_BUTTON_RESET_RAW</obj_property>
-   </wvobject>
-</wave_config>
diff --git a/testbench/simulate_isim.exe b/testbench/simulate_isim.exe
deleted file mode 100755
index 5e50691..0000000
--- a/testbench/simulate_isim.exe
+++ /dev/null
diff --git a/testbench/simulate_isim.prj b/testbench/simulate_isim.prj
deleted file mode 100644
index e610cc5..0000000
--- a/testbench/simulate_isim.prj
+++ /dev/null
@@ -1,3 +0,0 @@
-verilog unenclib ../hdl/project.v

-verilog unenclib tb.v

-verilog unenclib /opt/Xilinx/14.3/ISE_DS/ISE/verilog/src/glbl.v

diff --git a/testbench/tb.v b/testbench/tb.v
deleted file mode 100755
index 19e07bf..0000000
--- a/testbench/tb.v
+++ /dev/null
@@ -1,45 +0,0 @@
-`timescale 1ps/1ps
-module tb;
-
-   reg CLK100;
-always @(CLK100) begin
-    #4980.00 CLK100 <= ~CLK100;
-end
-
-initial begin
-  #0 CLK100 <= 1'b0;  // the first event that sets the clock in motion
-end
-
-
-reg [7:0]  Switch_input;
-wire [7:0] LED_output;
-wire       FPGA_RESET;
-
-project project_i (
-    .PUSH_BUTTON_RESET_RAW(FPGA_RESET),
-    .LED_output_0(LED_output[0]),
-    .LED_output_1(LED_output[1]),
-    .LED_output_2(LED_output[2]),
-    .LED_output_3(LED_output[3]),
-    .LED_output_4(LED_output[4]),
-    .LED_output_5(LED_output[5]),
-    .LED_output_6(LED_output[6]),
-    .SYSTEMCLOCK(CLK100),
-    .Switch_input_0(Switch_input[0]),
-    .Switch_input_1(Switch_input[1]),
-    .Switch_input_2(Switch_input[2]),
-    .Switch_input_3(Switch_input[3])
-  );
-
-
-initial begin
- #0         Switch_input <= 8'h00;
- $display("Switch set to zero");
- #1000000  Switch_input <= 8'h01;
- $display("Switch set to one");
- #2000000
- $display("TEST COMPLETE");
- $finish();
-end
-
-endmodule