| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Stupidly, spi_gpio_cfg() didn't take a spi_dev* argument on F1,
because it doesn't matter there. On F2, where we need to set an
alternate function when configuring GPIOs for SPI, we need to know the
dev.
We can't add break backwards compatibility, so we need a new
function. However, we've since added a bunch of foo_gpio_cfg()
routines, and we don't want confusing asymmetry in the names. So a
global style change is needed. (Fortunately, the new functions weren't
part of a release, so it's no problem to change their names).
Change all foo_gpio_cfg() routines to foo_config_gpios() (or
foo_config_gpio(), if there's only one GPIO to configure). For
backwards compatibility, make spi_gpio_cfg() on F1 an __always_inline
call to spi_config_gpios().
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To make this happen, we need to have <board/board.h> tell us whether
or not it's got each of the USARTs. Do that with BOARD_HAVE_USARTn,
for n = 1,...,6. This lets us define HardwareSerial instances only
when appropriate, and gets rid of some board-specific hacks we'd
accumulated.
The new <libmaple/usart.h> now has a convenience function for
determining the bus rate by using the appropriate STM32_PCLKx macro,
so we can shave a uint32 per instance, which is nice given that
they're all going to be in memory. This changes the constructor
arguments, but the API only specifies the semantics of the predefined
instances, so this is still backwards-compatible. (We should look into
storing the instances in Flash -- they don't change, after all.)
We don't actually need struct usart_dev's definition in
HardwareSerial.h, so replace it with a forward declaration and include
<libmaple/usart.h> it in HardwareSerial.cpp instead.
Assert some copyrights.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Fix @file in many places. Also fix up the descriptions where it's
appropriate. This standardizes the @file formatting across the library
to explicitly include any parent directories up to the repository
root.
Besides being nice, this will hopefully let us manage Doxygen's XML
output so as to make extracting series-specific pieces via Breathe in
the leaflabs-docs repo possible.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
FIXME:
- Test F1 support
- Solve problem of duplicated bytes being TXed unless delay is
inserted after configuration but before first bytes are TXed.
Rip out nonportable bits from top-level interfaces. The USART register
maps are basically the same between F1 and F2, so leave these, but add
register bit definitions which had name changes to the libmaple header
to avoid needless repetition. There are also a few new bits in the F2
USART registers; add definitions for these in the F2 USART header. Add
Doxygen comments for all USART bit definitions.
Deprecate struct usart_dev's max_baud field. This is just bloat that
doesn't bring us much real benefit.
Add new series-specific USART files for F1 and F2:
- libmaple/stm32f[1,2]/usart.c
- libmaple/stm32f[1,2]/include/series/usart.h
These are standard series-specific files, providing register map base
pointers, defining devices, implementing nonportable routines, etc.
We need a portable way to configure the USART GPIOs. To this end, add
usart_async_gpio_cfg() to the top-level USART interface. This function
is implemented in new F1 and F2 USART backends to take the appropriate
action to configure the RX and TX pins for asynchronous full duplex
mode.
USART baud rate calculation is done differently on the different
series. Keep the usart_set_baud_rate() declaration in the top-level
USART header, but move the implementations into the series-specific
usart.c files.
In usart_set_baud_rate(), allow for deriving clock_speed automatically
by letting user tell us to figure out the peripheral clock speed by
mapping the device's rcc_clk_id onto an STM32_PCLK[1,2] value. This
preserves flexibility for users with non-default clock configurations,
but makes things easier on everyone else.
Add private USART files for portable private USART routines:
- libmaple/usart_private.h
- libmaple/usart_private.c
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
|
|
Move libmaple/*.h to (new) libmaple/include/libmaple/. The new
accepted way to include a libmaple header foo.h is with:
#include <libmaple/foo.h>
This is more polite in terms of the include namespace. It also allows
us to e.g. implement the Arduino SPI library at all (which has header
SPI.h; providing it was previously impossible on case-insensitive
filesystems due to libmaple's spi.h).
Similarly for Wirish.
The old include style (#include "header.h") is now deprecated.
libmaple/*.h:
- Change include guard #defines from _FOO_H_ to _LIBMAPLE_FOO_H_.
- Add license headers where they're missing
- Add conditional extern "C" { ... } blocks where they're missing
(they aren't always necessary, but we might was well do it against
the future, while we're at it.).
- Change includes from #include "foo.h" to #include <libmaple/foo.h>.
- Move includes after extern "C".
- Remove extra trailing newlines
Note that this doesn't include the headers under libmaple/usb/ or
libmaple/usb/usb_lib. These will get fixed later.
libmaple/*.c:
- Change includes from #include "foo.h" to #include <libmaple/foo.h>.
Makefile:
- Add I$(LIBMAPLE_PATH)/include/libmaple to GLOBAL_FLAGS. This allows
for users (including Wirish) to migrate their code, but should go
away ASAP, since it slows down compilation.
Wirish:
- Move wirish/**/*.h to (new) wirish/include/wirish/. This ignores
the USB headers, which, as usual, are getting handled after
everything else.
- Similarly generify wirish/boards/ structure. For each supported
board "foo", move wirish/boards/foo.h and wirish/boards/foo.cpp to
wirish/boards/foo/include/board/board.h and
wirish/boards/foo/board.cpp, respectively. Also remove the #ifdef
hacks around the .cpp files.
- wirish/rules.mk: put wirish/boards/foo/include in the include path
(and add wirish/boards/foo/board.cpp to the list of sources to be
compiled). This allows saying:
#include <board/board.h>
instead of the hack currently in place. We can allow the user to
override this setting later to make adding custom board definitions
easier.
- Disable -Werror in libmaple/rules.mk, as the current USB warnings
don't let the olimex_stm32_h103 board compile. We can re-enable
-Werror once we've moved the board-specific bits out of libmaple
proper.
libraries, examples:
- Update includes accordingly.
- Miscellaneous cosmetic fixups.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
|
