diff options
Diffstat (limited to 'src/stm32lib/examples/FSMC/NAND')
| -rwxr-xr-x | src/stm32lib/examples/FSMC/NAND/fsmc_nand.c | 491 | ||||
| -rwxr-xr-x | src/stm32lib/examples/FSMC/NAND/fsmc_nand.h | 99 | ||||
| -rwxr-xr-x | src/stm32lib/examples/FSMC/NAND/main.c | 247 | ||||
| -rwxr-xr-x | src/stm32lib/examples/FSMC/NAND/readme.txt | 56 | ||||
| -rwxr-xr-x | src/stm32lib/examples/FSMC/NAND/stm32f10x_conf.h | 170 | ||||
| -rwxr-xr-x | src/stm32lib/examples/FSMC/NAND/stm32f10x_it.c | 810 | ||||
| -rwxr-xr-x | src/stm32lib/examples/FSMC/NAND/stm32f10x_it.h | 100 |
7 files changed, 0 insertions, 1973 deletions
diff --git a/src/stm32lib/examples/FSMC/NAND/fsmc_nand.c b/src/stm32lib/examples/FSMC/NAND/fsmc_nand.c deleted file mode 100755 index 7cc15e7..0000000 --- a/src/stm32lib/examples/FSMC/NAND/fsmc_nand.c +++ /dev/null @@ -1,491 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name : fsmc_nand.c
-* Author : MCD Application Team
-* Version : V2.0.1
-* Date : 06/13/2008
-* Description : This file provides a set of functions needed to drive the
-* NAND512W3A2 memory mounted on STM3210E-EVAL board.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-/* Includes ------------------------------------------------------------------*/
-#include "fsmc_nand.h"
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-
-#define FSMC_Bank_NAND FSMC_Bank2_NAND
-#define Bank_NAND_ADDR Bank2_NAND_ADDR
-#define Bank2_NAND_ADDR ((u32)0x70000000)
-
-/* Private macro -------------------------------------------------------------*/
-#define ROW_ADDRESS (Address.Page + (Address.Block + (Address.Zone * NAND_ZONE_SIZE)) * NAND_BLOCK_SIZE)
-
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/*******************************************************************************
-* Function Name : FSMC_NAND_Init
-* Description : Configures the FSMC and GPIOs to interface with the NAND memory.
-* This function must be called before any write/read operation
-* on the NAND.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void FSMC_NAND_Init(void)
-{
- GPIO_InitTypeDef GPIO_InitStructure;
- FSMC_NANDInitTypeDef FSMC_NANDInitStructure;
- FSMC_NAND_PCCARDTimingInitTypeDef p;
-
- RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD | RCC_APB2Periph_GPIOE |
- RCC_APB2Periph_GPIOF | RCC_APB2Periph_GPIOG, ENABLE);
-
-/*-- GPIO Configuration ------------------------------------------------------*/
-/* CLE, ALE, D0->D3, NOE, NWE and NCE2 NAND pin configuration */
- GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_14 | GPIO_Pin_15 |
- GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_4 | GPIO_Pin_5 |
- GPIO_Pin_7;
- GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
- GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
-
- GPIO_Init(GPIOD, &GPIO_InitStructure);
-
-/* D4->D7 NAND pin configuration */
- GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10;
-
- GPIO_Init(GPIOE, &GPIO_InitStructure);
-
-
-/* NWAIT NAND pin configuration */
- GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6;
- GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
- GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
-
- GPIO_Init(GPIOD, &GPIO_InitStructure);
-
-/* INT2 NAND pin configuration */
- GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6;
- GPIO_Init(GPIOG, &GPIO_InitStructure);
-
- /*-- FSMC Configuration ------------------------------------------------------*/
- p.FSMC_SetupTime = 0x1;
- p.FSMC_WaitSetupTime = 0x3;
- p.FSMC_HoldSetupTime = 0x2;
- p.FSMC_HiZSetupTime = 0x1;
-
- FSMC_NANDInitStructure.FSMC_Bank = FSMC_Bank2_NAND;
- FSMC_NANDInitStructure.FSMC_Waitfeature = FSMC_Waitfeature_Enable;
- FSMC_NANDInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b;
- FSMC_NANDInitStructure.FSMC_ECC = FSMC_ECC_Enable;
- FSMC_NANDInitStructure.FSMC_ECCPageSize = FSMC_ECCPageSize_512Bytes;
- FSMC_NANDInitStructure.FSMC_AddressLowMapping = FSMC_AddressLowMapping_Direct;
- FSMC_NANDInitStructure.FSMC_TCLRSetupTime = 0x00;
- FSMC_NANDInitStructure.FSMC_TARSetupTime = 0x00;
- FSMC_NANDInitStructure.FSMC_CommonSpaceTimingStruct = &p;
- FSMC_NANDInitStructure.FSMC_AttributeSpaceTimingStruct = &p;
-
- FSMC_NANDInit(&FSMC_NANDInitStructure);
-
- /* FSMC NAND Bank Cmd Test */
- FSMC_NANDCmd(FSMC_Bank2_NAND, ENABLE);
-}
-
-/******************************************************************************
-* Function Name : FSMC_NAND_ReadID
-* Description : Reads NAND memory's ID.
-* Input : - NAND_ID: pointer to a NAND_IDTypeDef structure which will hold
-* the Manufacturer and Device ID.
-* Output : None
-* Return : None
-*******************************************************************************/
-void FSMC_NAND_ReadID(NAND_IDTypeDef* NAND_ID)
-{
- u32 data = 0;
-
- /* Send Command to the command area */
- *(vu8 *)(Bank_NAND_ADDR | CMD_AREA) = 0x90;
- *(vu8 *)(Bank_NAND_ADDR | ADDR_AREA) = 0x00;
-
- /* Sequence to read ID from NAND flash */
- data = *(vu32 *)(Bank_NAND_ADDR | DATA_AREA);
-
- NAND_ID->Maker_ID = ADDR_1st_CYCLE (data);
- NAND_ID->Device_ID = ADDR_2nd_CYCLE (data);
- NAND_ID->Third_ID = ADDR_3rd_CYCLE (data);
- NAND_ID->Fourth_ID = ADDR_4th_CYCLE (data);
-}
-
-/******************************************************************************
-* Function Name : FSMC_NAND_WriteSmallPage
-* Description : This routine is for writing one or several 512 Bytes Page size.
-* Input : - pBuffer: pointer on the Buffer containing data to be written
-* - Address: First page address
-* - NumPageToWrite: Number of page to write
-* Output : None
-* Return : New status of the NAND operation. This parameter can be:
-* - NAND_TIMEOUT_ERROR: when the previous operation generate
-* a Timeout error
-* - NAND_READY: when memory is ready for the next operation
-* And the new status of the increment address operation. It can be:
-* - NAND_VALID_ADDRESS: When the new address is valid address
-* - NAND_INVALID_ADDRESS: When the new address is invalid address
-*******************************************************************************/
-u32 FSMC_NAND_WriteSmallPage(u8 *pBuffer, NAND_ADDRESS Address, u32 NumPageToWrite)
-{
- u32 index = 0x00, numpagewritten = 0x00, addressstatus = NAND_VALID_ADDRESS;
- u32 status = NAND_READY, size = 0x00;
-
- while((NumPageToWrite != 0x00) && (addressstatus == NAND_VALID_ADDRESS) && (status == NAND_READY))
- {
- /* Page write command and address */
- *(vu8 *)(Bank_NAND_ADDR | CMD_AREA) = NAND_CMD_AREA_A;
- *(vu8 *)(Bank_NAND_ADDR | CMD_AREA) = NAND_CMD_WRITE0;
-
- *(vu8 *)(Bank_NAND_ADDR | ADDR_AREA) = 0x00;
- *(vu8 *)(Bank_NAND_ADDR | ADDR_AREA) = ADDR_1st_CYCLE(ROW_ADDRESS);
- *(vu8 *)(Bank_NAND_ADDR | ADDR_AREA) = ADDR_2nd_CYCLE(ROW_ADDRESS);
- *(vu8 *)(Bank_NAND_ADDR | ADDR_AREA) = ADDR_3rd_CYCLE(ROW_ADDRESS);
-
- /* Calculate the size */
- size = NAND_PAGE_SIZE + (NAND_PAGE_SIZE * numpagewritten);
-
- /* Write data */
- for(; index < size; index++)
- {
- *(vu8 *)(Bank_NAND_ADDR | DATA_AREA) = pBuffer[index];
- }
-
- *(vu8 *)(Bank_NAND_ADDR | CMD_AREA) = NAND_CMD_WRITE_TRUE1;
-
- /* Check status for successful operation */
- status = FSMC_NAND_GetStatus();
-
- if(status == NAND_READY)
- {
- numpagewritten++;
-
- NumPageToWrite--;
-
- /* Calculate Next small page Address */
- addressstatus = FSMC_NAND_AddressIncrement(&Address);
- }
- }
-
- return (status | addressstatus);
-}
-
-/******************************************************************************
-* Function Name : FSMC_NAND_ReadSmallPage
-* Description : This routine is for sequential read from one or several
-* 512 Bytes Page size.
-* Input : - pBuffer: pointer on the Buffer to fill
-* - Address: First page address
-* - NumPageToRead: Number of page to read
-* Output : None
-* Return : New status of the NAND operation. This parameter can be:
-* - NAND_TIMEOUT_ERROR: when the previous operation generate
-* a Timeout error
-* - NAND_READY: when memory is ready for the next operation
-* And the new status of the increment address operation. It can be:
-* - NAND_VALID_ADDRESS: When the new address is valid address
-* - NAND_INVALID_ADDRESS: When the new address is invalid address
-*******************************************************************************/
-u32 FSMC_NAND_ReadSmallPage(u8 *pBuffer, NAND_ADDRESS Address, u32 NumPageToRead)
-{
- u32 index = 0x00, numpageread = 0x00, addressstatus = NAND_VALID_ADDRESS;
- u32 status = NAND_READY, size = 0x00;
-
- while((NumPageToRead != 0x0) && (addressstatus == NAND_VALID_ADDRESS))
- {
- /* Page Read command and page address */
- *(vu8 *)(Bank_NAND_ADDR | CMD_AREA) = NAND_CMD_AREA_A;
-
- *(vu8 *)(Bank_NAND_ADDR | ADDR_AREA) = 0x00;
- *(vu8 *)(Bank_NAND_ADDR | ADDR_AREA) = ADDR_1st_CYCLE(ROW_ADDRESS);
- *(vu8 *)(Bank_NAND_ADDR | ADDR_AREA) = ADDR_2nd_CYCLE(ROW_ADDRESS);
- *(vu8 *)(Bank_NAND_ADDR | ADDR_AREA) = ADDR_3rd_CYCLE(ROW_ADDRESS);
-
- *(vu8 *)(Bank_NAND_ADDR | CMD_AREA) = NAND_CMD_AREA_TRUE1;
-
- /* Calculate the size */
- size = NAND_PAGE_SIZE + (NAND_PAGE_SIZE * numpageread);
-
- /* Get Data into Buffer */
- for(; index < size; index++)
- {
- pBuffer[index]= *(vu8 *)(Bank_NAND_ADDR | DATA_AREA);
- }
-
- numpageread++;
-
- NumPageToRead--;
-
- /* Calculate page address */
- addressstatus = FSMC_NAND_AddressIncrement(&Address);
- }
-
- status = FSMC_NAND_GetStatus();
-
- return (status | addressstatus);
-}
-
-/******************************************************************************
-* Function Name : FSMC_NAND_WriteSpareArea
-* Description : This routine write the spare area information for the specified
-* pages addresses.
-* Input : - pBuffer: pointer on the Buffer containing data to be written
-* - Address: First page address
-* - NumSpareAreaTowrite: Number of Spare Area to write
-* Output : None
-* Return : New status of the NAND operation. This parameter can be:
-* - NAND_TIMEOUT_ERROR: when the previous operation generate
-* a Timeout error
-* - NAND_READY: when memory is ready for the next operation
-* And the new status of the increment address operation. It can be:
-* - NAND_VALID_ADDRESS: When the new address is valid address
-* - NAND_INVALID_ADDRESS: When the new address is invalid address
-*******************************************************************************/
-u32 FSMC_NAND_WriteSpareArea(u8 *pBuffer, NAND_ADDRESS Address, u32 NumSpareAreaTowrite)
-{
- u32 index = 0x00, numsparesreawritten = 0x00, addressstatus = NAND_VALID_ADDRESS;
- u32 status = NAND_READY, size = 0x00;
-
- while((NumSpareAreaTowrite != 0x00) && (addressstatus == NAND_VALID_ADDRESS) && (status == NAND_READY))
- {
- /* Page write Spare area command and address */
- *(vu8 *)(Bank_NAND_ADDR | CMD_AREA) = NAND_CMD_AREA_C;
- *(vu8 *)(Bank_NAND_ADDR | CMD_AREA) = NAND_CMD_WRITE0;
-
- *(vu8 *)(Bank_NAND_ADDR | ADDR_AREA) = 0x00;
- *(vu8 *)(Bank_NAND_ADDR | ADDR_AREA) = ADDR_1st_CYCLE(ROW_ADDRESS);
- *(vu8 *)(Bank_NAND_ADDR | ADDR_AREA) = ADDR_2nd_CYCLE(ROW_ADDRESS);
- *(vu8 *)(Bank_NAND_ADDR | ADDR_AREA) = ADDR_3rd_CYCLE(ROW_ADDRESS);
-
- /* Calculate the size */
- size = NAND_SPARE_AREA_SIZE + (NAND_SPARE_AREA_SIZE * numsparesreawritten);
-
- /* Write the data */
- for(; index < size; index++)
- {
- *(vu8 *)(Bank_NAND_ADDR | DATA_AREA) = pBuffer[index];
- }
-
- *(vu8 *)(Bank_NAND_ADDR | CMD_AREA) = NAND_CMD_WRITE_TRUE1;
-
- /* Check status for successful operation */
- status = FSMC_NAND_GetStatus();
-
- if(status == NAND_READY)
- {
- numsparesreawritten++;
-
- NumSpareAreaTowrite--;
-
- /* Calculate Next page Address */
- addressstatus = FSMC_NAND_AddressIncrement(&Address);
- }
- }
-
- return (status | addressstatus);
-}
-
-/******************************************************************************
-* Function Name : FSMC_NAND_ReadSpareArea
-* Description : This routine read the spare area information from the specified
-* pages addresses.
-* Input : - pBuffer: pointer on the Buffer to fill
-* - Address: First page address
-* - NumSpareAreaToRead: Number of Spare Area to read
-* Output : None
-* Return : New status of the NAND operation. This parameter can be:
-* - NAND_TIMEOUT_ERROR: when the previous operation generate
-* a Timeout error
-* - NAND_READY: when memory is ready for the next operation
-* And the new status of the increment address operation. It can be:
-* - NAND_VALID_ADDRESS: When the new address is valid address
-* - NAND_INVALID_ADDRESS: When the new address is invalid address
-*******************************************************************************/
-u32 FSMC_NAND_ReadSpareArea(u8 *pBuffer, NAND_ADDRESS Address, u32 NumSpareAreaToRead)
-{
- u32 numsparearearead = 0x00, index = 0x00, addressstatus = NAND_VALID_ADDRESS;
- u32 status = NAND_READY, size = 0x00;
-
- while((NumSpareAreaToRead != 0x0) && (addressstatus == NAND_VALID_ADDRESS))
- {
- /* Page Read command and page address */
- *(vu8 *)(Bank_NAND_ADDR | CMD_AREA) = NAND_CMD_AREA_C;
-
- *(vu8 *)(Bank_NAND_ADDR | ADDR_AREA) = 0x00;
- *(vu8 *)(Bank_NAND_ADDR | ADDR_AREA) = ADDR_1st_CYCLE(ROW_ADDRESS);
- *(vu8 *)(Bank_NAND_ADDR | ADDR_AREA) = ADDR_2nd_CYCLE(ROW_ADDRESS);
- *(vu8 *)(Bank_NAND_ADDR | ADDR_AREA) = ADDR_3rd_CYCLE(ROW_ADDRESS);
-
- *(vu8 *)(Bank_NAND_ADDR | CMD_AREA) = NAND_CMD_AREA_TRUE1;
-
- /* Data Read */
- size = NAND_SPARE_AREA_SIZE + (NAND_SPARE_AREA_SIZE * numsparearearead);
-
- /* Get Data into Buffer */
- for ( ;index < size; index++)
- {
- pBuffer[index] = *(vu8 *)(Bank_NAND_ADDR | DATA_AREA);
- }
-
- numsparearearead++;
-
- NumSpareAreaToRead--;
-
- /* Calculate page address */
- addressstatus = FSMC_NAND_AddressIncrement(&Address);
- }
-
- status = FSMC_NAND_GetStatus();
-
- return (status | addressstatus);
-}
-
-/******************************************************************************
-* Function Name : FSMC_NAND_EraseBlock
-* Description : This routine erase complete block from NAND FLASH
-* Input : - Address: Any address into block to be erased
-* Output : None
-* Return : New status of the NAND operation. This parameter can be:
-* - NAND_TIMEOUT_ERROR: when the previous operation generate
-* a Timeout error
-* - NAND_READY: when memory is ready for the next operation
-*******************************************************************************/
-u32 FSMC_NAND_EraseBlock(NAND_ADDRESS Address)
-{
- *(vu8 *)(Bank_NAND_ADDR | CMD_AREA) = NAND_CMD_ERASE0;
-
- *(vu8 *)(Bank_NAND_ADDR | ADDR_AREA) = ADDR_1st_CYCLE(ROW_ADDRESS);
- *(vu8 *)(Bank_NAND_ADDR | ADDR_AREA) = ADDR_2nd_CYCLE(ROW_ADDRESS);
- *(vu8 *)(Bank_NAND_ADDR | ADDR_AREA) = ADDR_3rd_CYCLE(ROW_ADDRESS);
-
- *(vu8 *)(Bank_NAND_ADDR | CMD_AREA) = NAND_CMD_ERASE1;
-
- return (FSMC_NAND_GetStatus());
-}
-
-/******************************************************************************
-* Function Name : FSMC_NAND_Reset
-* Description : This routine reset the NAND FLASH
-* Input : None
-* Output : None
-* Return : NAND_READY
-*******************************************************************************/
-u32 FSMC_NAND_Reset(void)
-{
- *(vu8 *)(Bank_NAND_ADDR | CMD_AREA) = NAND_CMD_RESET;
-
- return (NAND_READY);
-}
-
-/******************************************************************************
-* Function Name : FSMC_NAND_GetStatus
-* Description : Get the NAND operation status
-* Input : None
-* Output : None
-* Return : New status of the NAND operation. This parameter can be:
-* - NAND_TIMEOUT_ERROR: when the previous operation generate
-* a Timeout error
-* - NAND_READY: when memory is ready for the next operation
-*******************************************************************************/
-u32 FSMC_NAND_GetStatus(void)
-{
- u32 timeout = 0x1000000, status = NAND_READY;
-
- status = FSMC_NAND_ReadStatus();
-
- /* Wait for a NAND operation to complete or a TIMEOUT to occur */
- while ((status != NAND_READY) &&( timeout != 0x00))
- {
- status = FSMC_NAND_ReadStatus();
- timeout --;
- }
-
- if(timeout == 0x00)
- {
- status = NAND_TIMEOUT_ERROR;
- }
-
- /* Return the operation status */
- return (status);
-}
-/******************************************************************************
-* Function Name : FSMC_NAND_ReadStatus
-* Description : Reads the NAND memory status using the Read status command
-* Input : None
-* Output : None
-* Return : The status of the NAND memory. This parameter can be:
-* - NAND_BUSY: when memory is busy
-* - NAND_READY: when memory is ready for the next operation
-* - NAND_ERROR: when the previous operation gererates error
-*******************************************************************************/
-u32 FSMC_NAND_ReadStatus(void)
-{
- u32 data = 0x00, status = NAND_BUSY;
-
- /* Read status operation ------------------------------------ */
- *(vu8 *)(Bank_NAND_ADDR | CMD_AREA) = NAND_CMD_STATUS;
- data = *(vu8 *)(Bank_NAND_ADDR);
-
- if((data & NAND_ERROR) == NAND_ERROR)
- {
- status = NAND_ERROR;
- }
- else if((data & NAND_READY) == NAND_READY)
- {
- status = NAND_READY;
- }
- else
- {
- status = NAND_BUSY;
- }
-
- return (status);
-}
-
-/******************************************************************************
-* Function Name : NAND_AddressIncrement
-* Description : Increment the NAND memory address
-* Input : - Address: address to be incremented.
-* Output : None
-* Return : The new status of the increment address operation. It can be:
-* - NAND_VALID_ADDRESS: When the new address is valid address
-* - NAND_INVALID_ADDRESS: When the new address is invalid address
-*******************************************************************************/
-u32 FSMC_NAND_AddressIncrement(NAND_ADDRESS* Address)
-{
- u32 status = NAND_VALID_ADDRESS;
-
- Address->Page++;
-
- if(Address->Page == NAND_BLOCK_SIZE)
- {
- Address->Page = 0;
- Address->Block++;
-
- if(Address->Block == NAND_ZONE_SIZE)
- {
- Address->Block = 0;
- Address->Zone++;
-
- if(Address->Zone == NAND_MAX_ZONE)
- {
- status = NAND_INVALID_ADDRESS;
- }
- }
- }
-
- return (status);
-}
-
-/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
diff --git a/src/stm32lib/examples/FSMC/NAND/fsmc_nand.h b/src/stm32lib/examples/FSMC/NAND/fsmc_nand.h deleted file mode 100755 index dd90682..0000000 --- a/src/stm32lib/examples/FSMC/NAND/fsmc_nand.h +++ /dev/null @@ -1,99 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name : fsmc_nand.h
-* Author : MCD Application Team
-* Version : V2.0.1
-* Date : 06/13/2008
-* Description : Header for fsmc_nand.c file.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __FSMC_NAND_H
-#define __FSMC_NAND_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_lib.h"
-
-/* Exported types ------------------------------------------------------------*/
-typedef struct
-{
- u8 Maker_ID;
- u8 Device_ID;
- u8 Third_ID;
- u8 Fourth_ID;
-}NAND_IDTypeDef;
-
-typedef struct
-{
- u16 Zone;
- u16 Block;
- u16 Page;
-} NAND_ADDRESS;
-
-/* Exported constants --------------------------------------------------------*/
-/* NAND Area definition for STM3210E-EVAL Board RevD */
-#define CMD_AREA (u32)(1<<16) /* A16 = CLE high */
-#define ADDR_AREA (u32)(1<<17) /* A17 = ALE high */
-
-#define DATA_AREA ((u32)0x00000000)
-
-/* FSMC NAND memory command */
-#define NAND_CMD_AREA_A ((u8)0x00)
-#define NAND_CMD_AREA_B ((u8)0x01)
-#define NAND_CMD_AREA_C ((u8)0x50)
-#define NAND_CMD_AREA_TRUE1 ((u8)0x30)
-
-#define NAND_CMD_WRITE0 ((u8)0x80)
-#define NAND_CMD_WRITE_TRUE1 ((u8)0x10)
-
-#define NAND_CMD_ERASE0 ((u8)0x60)
-#define NAND_CMD_ERASE1 ((u8)0xD0)
-
-#define NAND_CMD_READID ((u8)0x90)
-#define NAND_CMD_STATUS ((u8)0x70)
-#define NAND_CMD_LOCK_STATUS ((u8)0x7A)
-#define NAND_CMD_RESET ((u8)0xFF)
-
-/* NAND memory status */
-#define NAND_VALID_ADDRESS ((u32)0x00000100)
-#define NAND_INVALID_ADDRESS ((u32)0x00000200)
-#define NAND_TIMEOUT_ERROR ((u32)0x00000400)
-#define NAND_BUSY ((u32)0x00000000)
-#define NAND_ERROR ((u32)0x00000001)
-#define NAND_READY ((u32)0x00000040)
-
-/* FSMC NAND memory parameters */
-#define NAND_PAGE_SIZE ((u16)0x0200) /* 512 bytes per page w/o Spare Area */
-#define NAND_BLOCK_SIZE ((u16)0x0020) /* 32x512 bytes pages per block */
-#define NAND_ZONE_SIZE ((u16)0x0400) /* 1024 Block per zone */
-#define NAND_SPARE_AREA_SIZE ((u16)0x0010) /* last 16 bytes as spare area */
-#define NAND_MAX_ZONE ((u16)0x0004) /* 4 zones of 1024 block */
-
-/* FSMC NAND memory address computation */
-#define ADDR_1st_CYCLE(ADDR) (u8)((ADDR)& 0xFF) /* 1st addressing cycle */
-#define ADDR_2nd_CYCLE(ADDR) (u8)(((ADDR)& 0xFF00) >> 8) /* 2nd addressing cycle */
-#define ADDR_3rd_CYCLE(ADDR) (u8)(((ADDR)& 0xFF0000) >> 16) /* 3rd addressing cycle */
-#define ADDR_4th_CYCLE(ADDR) (u8)(((ADDR)& 0xFF000000) >> 24) /* 4th addressing cycle */
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-void FSMC_NAND_Init(void);
-void FSMC_NAND_ReadID(NAND_IDTypeDef* NAND_ID);
-u32 FSMC_NAND_WriteSmallPage(u8 *pBuffer, NAND_ADDRESS Address, u32 NumPageToWrite);
-u32 FSMC_NAND_ReadSmallPage (u8 *pBuffer, NAND_ADDRESS Address, u32 NumPageToRead);
-u32 FSMC_NAND_WriteSpareArea(u8 *pBuffer, NAND_ADDRESS Address, u32 NumSpareAreaTowrite);
-u32 FSMC_NAND_ReadSpareArea(u8 *pBuffer, NAND_ADDRESS Address, u32 NumSpareAreaToRead);
-u32 FSMC_NAND_EraseBlock(NAND_ADDRESS Address);
-u32 FSMC_NAND_Reset(void);
-u32 FSMC_NAND_GetStatus(void);
-u32 FSMC_NAND_ReadStatus(void);
-u32 FSMC_NAND_AddressIncrement(NAND_ADDRESS* Address);
-
-#endif /* __FSMC_NAND_H */
-
-/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
diff --git a/src/stm32lib/examples/FSMC/NAND/main.c b/src/stm32lib/examples/FSMC/NAND/main.c deleted file mode 100755 index 26ac17c..0000000 --- a/src/stm32lib/examples/FSMC/NAND/main.c +++ /dev/null @@ -1,247 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name : main.c
-* Author : MCD Application Team
-* Version : V2.0.1
-* Date : 06/13/2008
-* Description : Main program body
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-/* Includes ------------------------------------------------------------------*/
-#include "fsmc_nand.h"
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-#define BUFFER_SIZE 0x400
-#define NAND_ST_MakerID 0x20
-#define NAND_ST_DeviceID 0x76
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-NAND_IDTypeDef NAND_ID;
-GPIO_InitTypeDef GPIO_InitStructure;
-NAND_ADDRESS WriteReadAddr;
-
-u8 TxBuffer[BUFFER_SIZE], RxBuffer[BUFFER_SIZE];
-
-ErrorStatus HSEStartUpStatus;
-vu32 PageNumber = 2, WriteReadStatus = 0, status= 0;
-u32 j = 0;
-
-/* Private function prototypes -----------------------------------------------*/
-void RCC_Configuration(void);
-void NVIC_Configuration(void);
-void Fill_Buffer(u8 *pBuffer, u16 BufferLenght, u32 Offset);
-
-/* Private functions ---------------------------------------------------------*/
-/*******************************************************************************
-* Function Name : main
-* Description : Main program.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-int main(void)
-{
-
-#ifdef DEBUG
- debug();
-#endif
-
- /* System Clocks Configuration */
- RCC_Configuration();
-
- /* NVIC Configuration */
- NVIC_Configuration();
-
- /* PF.06, PF.07 and PF.08 config to drive LD1, LD2 and LD3 *****************/
- /* Enable GPIOF clock */
- RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOF, ENABLE);
-
- /* Configure PF.06, PF.07 and PF.08 as Output push-pull */
- GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_8;
- GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
- GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
- GPIO_Init(GPIOF, &GPIO_InitStructure);
-
- /* Enable the FSMC Clock */
- RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE);
-
- /* FSMC Initialization */
- FSMC_NAND_Init();
-
- /* NAND read ID command */
- FSMC_NAND_ReadID(&NAND_ID);
-
- /* Verify the NAND ID */
- if((NAND_ID.Maker_ID == NAND_ST_MakerID) && (NAND_ID.Device_ID == NAND_ST_DeviceID))
- {
-
- /* NAND memory address to write to */
- WriteReadAddr.Zone = 0x00;
- WriteReadAddr.Block = 0x00;
- WriteReadAddr.Page = 0x00;
-
- /* Erase the NAND first Block */
- status = FSMC_NAND_EraseBlock(WriteReadAddr);
-
- /* Write data to FSMC NAND memory */
- /* Fill the buffer to send */
- Fill_Buffer(TxBuffer, BUFFER_SIZE , 0x66);
-
- status = FSMC_NAND_WriteSmallPage(TxBuffer, WriteReadAddr, PageNumber);
-
- /* Read back the written data */
- status = FSMC_NAND_ReadSmallPage (RxBuffer, WriteReadAddr, PageNumber);
-
- /* Verify the written data */
- for(j = 0; j < BUFFER_SIZE; j++)
- {
- if(TxBuffer[j] != RxBuffer[j])
- {
- WriteReadStatus++;
- }
- }
-
- if (WriteReadStatus == 0)
- { /* OK */
- /* Turn on LD1 */
- GPIO_SetBits(GPIOF, GPIO_Pin_6);
- }
- else
- { /* KO */
- /* Turn on LD2 */
- GPIO_SetBits(GPIOF, GPIO_Pin_7);
- }
- }
- else
- {
- /* Turn on LD3 */
- GPIO_SetBits(GPIOF, GPIO_Pin_8);
- }
-
- while(1)
- {
- }
-}
-
-/*******************************************************************************
-* Function Name : RCC_Configuration
-* Description : Configures the different system clocks.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void RCC_Configuration(void)
-{
- /* RCC system reset(for debug purpose) */
- RCC_DeInit();
-
- /* Enable HSE */
- RCC_HSEConfig(RCC_HSE_ON);
-
- /* Wait till HSE is ready */
- HSEStartUpStatus = RCC_WaitForHSEStartUp();
-
- if(HSEStartUpStatus == SUCCESS)
- {
- /* Enable Prefetch Buffer */
- FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);
-
- /* Flash 2 wait state */
- FLASH_SetLatency(FLASH_Latency_2);
-
- /* HCLK = SYSCLK */
- RCC_HCLKConfig(RCC_SYSCLK_Div1);
-
- /* PCLK2 = HCLK */
- RCC_PCLK2Config(RCC_HCLK_Div1);
-
- /* PCLK1 = HCLK/2 */
- RCC_PCLK1Config(RCC_HCLK_Div2);
-
- /* PLLCLK = 8MHz * 9 = 72 MHz */
- RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9);
-
- /* Enable PLL */
- RCC_PLLCmd(ENABLE);
-
- /* Wait till PLL is ready */
- while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET)
- {
- }
-
- /* Select PLL as system clock source */
- RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
-
- /* Wait till PLL is used as system clock source */
- while(RCC_GetSYSCLKSource() != 0x08)
- {
- }
- }
-}
-
-/*******************************************************************************
-* Function Name : NVIC_Configuration
-* Description : Configures Vector Table base location.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void NVIC_Configuration(void)
-{
-#ifdef VECT_TAB_RAM
- /* Set the Vector Table base location at 0x20000000 */
- NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0);
-#else /* VECT_TAB_FLASH */
- /* Set the Vector Table base location at 0x08000000 */
- NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0);
-#endif
-}
-
-/*******************************************************************************
-* Function name : Fill_Buffer
-* Description : Fill the buffer
-* Input : - pBuffer: pointer on the Buffer to fill
-* - BufferSize: size of the buffer to fill
-* - Offset: first value to fill on the Buffer
-* Output param : None
-*******************************************************************************/
-void Fill_Buffer(u8 *pBuffer, u16 BufferLenght, u32 Offset)
-{
- u16 IndexTmp = 0;
-
- /* Put in global buffer same values */
- for (IndexTmp = 0; IndexTmp < BufferLenght; IndexTmp++ )
- {
- pBuffer[IndexTmp] = IndexTmp + Offset;
- }
-}
-
-#ifdef DEBUG
-/*******************************************************************************
-* Function Name : assert_failed
-* Description : Reports the name of the source file and the source line number
-* where the assert_param error has occurred.
-* Input : - file: pointer to the source file name
-* - line: assert_param error line source number
-* Output : None
-* Return : None
-*******************************************************************************/
-void assert_failed(u8* file, u32 line)
-{
- /* User can add his own implementation to report the file name and line number,
- ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
-
- /* Infinite loop */
- while (1)
- {
- }
-}
-#endif
-/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
diff --git a/src/stm32lib/examples/FSMC/NAND/readme.txt b/src/stm32lib/examples/FSMC/NAND/readme.txt deleted file mode 100755 index bd78bb4..0000000 --- a/src/stm32lib/examples/FSMC/NAND/readme.txt +++ /dev/null @@ -1,56 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name : readme.txt
-* Author : MCD Application Team
-* Version : V2.0.1
-* Date : 06/13/2008
-* Description : Description of the FSMC NAND Example.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-Example description
-===================
-This example provides a basic example of how to use the FSMC firmware library and
-an associate driver to perform erase/read/write operations on the NAND512W3A2 memory
-mounted on STM3210E-EVAL board.
-
-
-Directory contents
-==================
-stm32f10x_conf.h Library Configuration file
-stm32f10x_it.c Interrupt handlers
-stm32f10x_it.h Header for stm32f10x_it.c
-fsmc_nand.c Driver for NAND memory
-fsmc_nand.h Header for fsmc_nand.c
-main.c Main program
-
-
-Hardware environment
-====================
-This example runs on STMicroelectronics STM3210E-EVAL evaluation board RevD.
-
-Note: make sure that the Jumper 7 (JP7) is in position 1<-->2.
-
-
-How to use it
-=============
-In order to make the program work, you must do the following:
-- Create a project and setup all your toolchain's start-up files
-- Compile the directory content files and required Library files:
- + stm32f10x_lib.c
- + stm32f10x_gpio.c
- + stm32f10x_rcc.c
- + stm32f10x_nvic.c
- + stm32f10x_flash.c
- + stm32f10x_fsmc.c
-
-- Link all compiled files and load your image into target memory
-- Run the example
-
-
-******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******
diff --git a/src/stm32lib/examples/FSMC/NAND/stm32f10x_conf.h b/src/stm32lib/examples/FSMC/NAND/stm32f10x_conf.h deleted file mode 100755 index 48e488f..0000000 --- a/src/stm32lib/examples/FSMC/NAND/stm32f10x_conf.h +++ /dev/null @@ -1,170 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name : stm32f10x_conf.h
-* Author : MCD Application Team
-* Version : V2.0.1
-* Date : 06/13/2008
-* Description : Library configuration file.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_CONF_H
-#define __STM32F10x_CONF_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_type.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Uncomment the line below to compile the library in DEBUG mode, this will expanse
- the "assert_param" macro in the firmware library code (see "Exported macro"
- section below) */
-/*#define DEBUG 1*/
-
-/* Comment the line below to disable the specific peripheral inclusion */
-/************************************* ADC ************************************/
-//#define _ADC
-//#define _ADC1
-//#define _ADC2
-//#define _ADC3
-
-/************************************* BKP ************************************/
-//#define _BKP
-
-/************************************* CAN ************************************/
-//#define _CAN
-
-/************************************* CRC ************************************/
-//#define _CRC
-
-/************************************* DAC ************************************/
-//#define _DAC
-
-/************************************* DBGMCU *********************************/
-//#define _DBGMCU
-
-/************************************* DMA ************************************/
-//#define _DMA
-//#define _DMA1_Channel1
-//#define _DMA1_Channel2
-//#define _DMA1_Channel3
-//#define _DMA1_Channel4
-//#define _DMA1_Channel5
-//#define _DMA1_Channel6
-//#define _DMA1_Channel7
-//#define _DMA2_Channel1
-//#define _DMA2_Channel2
-//#define _DMA2_Channel3
-//#define _DMA2_Channel4
-//#define _DMA2_Channel5
-
-/************************************* EXTI ***********************************/
-//#define _EXTI
-
-/************************************* FLASH and Option Bytes *****************/
-#define _FLASH
-/* Uncomment the line below to enable FLASH program/erase/protections functions,
- otherwise only FLASH configuration (latency, prefetch, half cycle) functions
- are enabled */
-/* #define _FLASH_PROG */
-
-/************************************* FSMC ***********************************/
-#define _FSMC
-
-/************************************* GPIO ***********************************/
-#define _GPIO
-//#define _GPIOA
-//#define _GPIOB
-//#define _GPIOC
-#define _GPIOD
-#define _GPIOE
-#define _GPIOF
-#define _GPIOG
-#define _AFIO
-
-/************************************* I2C ************************************/
-//#define _I2C
-//#define _I2C1
-//#define _I2C2
-
-/************************************* IWDG ***********************************/
-//#define _IWDG
-
-/************************************* NVIC ***********************************/
-#define _NVIC
-
-/************************************* PWR ************************************/
-//#define _PWR
-
-/************************************* RCC ************************************/
-#define _RCC
-
-/************************************* RTC ************************************/
-//#define _RTC
-
-/************************************* SDIO ***********************************/
-//#define _SDIO
-
-/************************************* SPI ************************************/
-//#define _SPI
-//#define _SPI1
-//#define _SPI2
-//#define _SPI3
-
-/************************************* SysTick ********************************/
-//#define _SysTick
-
-/************************************* TIM ************************************/
-//#define _TIM
-//#define _TIM1
-//#define _TIM2
-//#define _TIM3
-//#define _TIM4
-//#define _TIM5
-//#define _TIM6
-//#define _TIM7
-//#define _TIM8
-
-/************************************* USART **********************************/
-//#define _USART
-//#define _USART1
-//#define _USART2
-//#define _USART3
-//#define _UART4
-//#define _UART5
-
-/************************************* WWDG ***********************************/
-//#define _WWDG
-
-/* In the following line adjust the value of External High Speed oscillator (HSE)
- used in your application */
-#define HSE_Value ((u32)8000000) /* Value of the External oscillator in Hz*/
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef DEBUG
-/*******************************************************************************
-* Macro Name : assert_param
-* Description : The assert_param macro is used for function's parameters check.
-* It is used only if the library is compiled in DEBUG mode.
-* Input : - expr: If expr is false, it calls assert_failed function
-* which reports the name of the source file and the source
-* line number of the call that failed.
-* If expr is true, it returns no value.
-* Return : None
-*******************************************************************************/
- #define assert_param(expr) ((expr) ? (void)0 : assert_failed((u8 *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
- void assert_failed(u8* file, u32 line);
-#else
- #define assert_param(expr) ((void)0)
-#endif /* DEBUG */
-
-#endif /* __STM32F10x_CONF_H */
-
-/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
diff --git a/src/stm32lib/examples/FSMC/NAND/stm32f10x_it.c b/src/stm32lib/examples/FSMC/NAND/stm32f10x_it.c deleted file mode 100755 index e27c1e7..0000000 --- a/src/stm32lib/examples/FSMC/NAND/stm32f10x_it.c +++ /dev/null @@ -1,810 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name : stm32f10x_it.c
-* Author : MCD Application Team
-* Version : V2.0.1
-* Date : 06/13/2008
-* Description : Main Interrupt Service Routines.
-* This file provides template for all exceptions handler
-* and peripherals interrupt service routine.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_it.h"
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/*******************************************************************************
-* Function Name : NMIException
-* Description : This function handles NMI exception.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void NMIException(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : HardFaultException
-* Description : This function handles Hard Fault exception.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void HardFaultException(void)
-{
- /* Go to infinite loop when Hard Fault exception occurs */
- while (1)
- {
- }
-}
-
-/*******************************************************************************
-* Function Name : MemManageException
-* Description : This function handles Memory Manage exception.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void MemManageException(void)
-{
- /* Go to infinite loop when Memory Manage exception occurs */
- while (1)
- {
- }
-}
-
-/*******************************************************************************
-* Function Name : BusFaultException
-* Description : This function handles Bus Fault exception.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void BusFaultException(void)
-{
- /* Go to infinite loop when Bus Fault exception occurs */
- while (1)
- {
- }
-}
-
-/*******************************************************************************
-* Function Name : UsageFaultException
-* Description : This function handles Usage Fault exception.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void UsageFaultException(void)
-{
- /* Go to infinite loop when Usage Fault exception occurs */
- while (1)
- {
- }
-}
-
-/*******************************************************************************
-* Function Name : DebugMonitor
-* Description : This function handles Debug Monitor exception.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void DebugMonitor(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : SVCHandler
-* Description : This function handles SVCall exception.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void SVCHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : PendSVC
-* Description : This function handles PendSVC exception.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void PendSVC(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : SysTickHandler
-* Description : This function handles SysTick Handler.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void SysTickHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : WWDG_IRQHandler
-* Description : This function handles WWDG interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void WWDG_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : PVD_IRQHandler
-* Description : This function handles PVD interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void PVD_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : TAMPER_IRQHandler
-* Description : This function handles Tamper interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TAMPER_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : RTC_IRQHandler
-* Description : This function handles RTC global interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void RTC_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : FLASH_IRQHandler
-* Description : This function handles Flash interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void FLASH_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : RCC_IRQHandler
-* Description : This function handles RCC interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void RCC_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : EXTI0_IRQHandler
-* Description : This function handles External interrupt Line 0 request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void EXTI0_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : EXTI1_IRQHandler
-* Description : This function handles External interrupt Line 1 request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void EXTI1_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : EXTI2_IRQHandler
-* Description : This function handles External interrupt Line 2 request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void EXTI2_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : EXTI3_IRQHandler
-* Description : This function handles External interrupt Line 3 request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void EXTI3_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : EXTI4_IRQHandler
-* Description : This function handles External interrupt Line 4 request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void EXTI4_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : DMA1_Channel1_IRQHandler
-* Description : This function handles DMA1 Channel 1 interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void DMA1_Channel1_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : DMA1_Channel2_IRQHandler
-* Description : This function handles DMA1 Channel 2 interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void DMA1_Channel2_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : DMA1_Channel3_IRQHandler
-* Description : This function handles DMA1 Channel 3 interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void DMA1_Channel3_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : DMA1_Channel4_IRQHandler
-* Description : This function handles DMA1 Channel 4 interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void DMA1_Channel4_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : DMA1_Channel5_IRQHandler
-* Description : This function handles DMA1 Channel 5 interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void DMA1_Channel5_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : DMA1_Channel6_IRQHandler
-* Description : This function handles DMA1 Channel 6 interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void DMA1_Channel6_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : DMA1_Channel7_IRQHandler
-* Description : This function handles DMA1 Channel 7 interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void DMA1_Channel7_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : ADC1_2_IRQHandler
-* Description : This function handles ADC1 and ADC2 global interrupts requests.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void ADC1_2_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : USB_HP_CAN_TX_IRQHandler
-* Description : This function handles USB High Priority or CAN TX interrupts
-* requests.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void USB_HP_CAN_TX_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : USB_LP_CAN_RX0_IRQHandler
-* Description : This function handles USB Low Priority or CAN RX0 interrupts
-* requests.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void USB_LP_CAN_RX0_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : CAN_RX1_IRQHandler
-* Description : This function handles CAN RX1 interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void CAN_RX1_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : CAN_SCE_IRQHandler
-* Description : This function handles CAN SCE interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void CAN_SCE_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : EXTI9_5_IRQHandler
-* Description : This function handles External lines 9 to 5 interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void EXTI9_5_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : TIM1_BRK_IRQHandler
-* Description : This function handles TIM1 Break interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM1_BRK_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : TIM1_UP_IRQHandler
-* Description : This function handles TIM1 overflow and update interrupt
-* request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM1_UP_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : TIM1_TRG_COM_IRQHandler
-* Description : This function handles TIM1 Trigger and commutation interrupts
-* requests.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM1_TRG_COM_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : TIM1_CC_IRQHandler
-* Description : This function handles TIM1 capture compare interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM1_CC_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : TIM2_IRQHandler
-* Description : This function handles TIM2 global interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM2_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : TIM3_IRQHandler
-* Description : This function handles TIM3 global interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM3_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : TIM4_IRQHandler
-* Description : This function handles TIM4 global interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM4_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : I2C1_EV_IRQHandler
-* Description : This function handles I2C1 Event interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void I2C1_EV_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : I2C1_ER_IRQHandler
-* Description : This function handles I2C1 Error interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void I2C1_ER_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : I2C2_EV_IRQHandler
-* Description : This function handles I2C2 Event interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void I2C2_EV_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : I2C2_ER_IRQHandler
-* Description : This function handles I2C2 Error interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void I2C2_ER_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : SPI1_IRQHandler
-* Description : This function handles SPI1 global interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void SPI1_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : SPI2_IRQHandler
-* Description : This function handles SPI2 global interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void SPI2_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : USART1_IRQHandler
-* Description : This function handles USART1 global interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void USART1_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : USART2_IRQHandler
-* Description : This function handles USART2 global interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void USART2_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : USART3_IRQHandler
-* Description : This function handles USART3 global interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void USART3_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : EXTI15_10_IRQHandler
-* Description : This function handles External lines 15 to 10 interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void EXTI15_10_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : RTCAlarm_IRQHandler
-* Description : This function handles RTC Alarm interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void RTCAlarm_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : USBWakeUp_IRQHandler
-* Description : This function handles USB WakeUp interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void USBWakeUp_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : TIM8_BRK_IRQHandler
-* Description : This function handles TIM8 Break interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM8_BRK_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : TIM8_UP_IRQHandler
-* Description : This function handles TIM8 overflow and update interrupt
-* request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM8_UP_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : TIM8_TRG_COM_IRQHandler
-* Description : This function handles TIM8 Trigger and commutation interrupts
-* requests.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM8_TRG_COM_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : TIM8_CC_IRQHandler
-* Description : This function handles TIM8 capture compare interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM8_CC_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : ADC3_IRQHandler
-* Description : This function handles ADC3 global interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void ADC3_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : FSMC_IRQHandler
-* Description : This function handles FSMC global interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void FSMC_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : SDIO_IRQHandler
-* Description : This function handles SDIO global interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void SDIO_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : TIM5_IRQHandler
-* Description : This function handles TIM5 global interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM5_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : SPI3_IRQHandler
-* Description : This function handles SPI3 global interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void SPI3_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : UART4_IRQHandler
-* Description : This function handles UART4 global interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART4_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : UART5_IRQHandler
-* Description : This function handles UART5 global interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART5_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : TIM6_IRQHandler
-* Description : This function handles TIM6 global interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM6_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : TIM7_IRQHandler
-* Description : This function handles TIM7 global interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM7_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : DMA2_Channel1_IRQHandler
-* Description : This function handles DMA2 Channel 1 interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void DMA2_Channel1_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : DMA2_Channel2_IRQHandler
-* Description : This function handles DMA2 Channel 2 interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void DMA2_Channel2_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : DMA2_Channel3_IRQHandler
-* Description : This function handles DMA2 Channel 3 interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void DMA2_Channel3_IRQHandler(void)
-{
-}
-
-/*******************************************************************************
-* Function Name : DMA2_Channel4_5_IRQHandler
-* Description : This function handles DMA2 Channel 4 and DMA2 Channel 5
-* interrupt request.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void DMA2_Channel4_5_IRQHandler(void)
-{
-}
-
-/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
diff --git a/src/stm32lib/examples/FSMC/NAND/stm32f10x_it.h b/src/stm32lib/examples/FSMC/NAND/stm32f10x_it.h deleted file mode 100755 index e74b6cc..0000000 --- a/src/stm32lib/examples/FSMC/NAND/stm32f10x_it.h +++ /dev/null @@ -1,100 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name : stm32f10x_it.h
-* Author : MCD Application Team
-* Version : V2.0.1
-* Date : 06/13/2008
-* Description : This file contains the headers of the interrupt handlers.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_IT_H
-#define __STM32F10x_IT_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_lib.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void NMIException(void);
-void HardFaultException(void);
-void MemManageException(void);
-void BusFaultException(void);
-void UsageFaultException(void);
-void DebugMonitor(void);
-void SVCHandler(void);
-void PendSVC(void);
-void SysTickHandler(void);
-void WWDG_IRQHandler(void);
-void PVD_IRQHandler(void);
-void TAMPER_IRQHandler(void);
-void RTC_IRQHandler(void);
-void FLASH_IRQHandler(void);
-void RCC_IRQHandler(void);
-void EXTI0_IRQHandler(void);
-void EXTI1_IRQHandler(void);
-void EXTI2_IRQHandler(void);
-void EXTI3_IRQHandler(void);
-void EXTI4_IRQHandler(void);
-void DMA1_Channel1_IRQHandler(void);
-void DMA1_Channel2_IRQHandler(void);
-void DMA1_Channel3_IRQHandler(void);
-void DMA1_Channel4_IRQHandler(void);
-void DMA1_Channel5_IRQHandler(void);
-void DMA1_Channel6_IRQHandler(void);
-void DMA1_Channel7_IRQHandler(void);
-void ADC1_2_IRQHandler(void);
-void USB_HP_CAN_TX_IRQHandler(void);
-void USB_LP_CAN_RX0_IRQHandler(void);
-void CAN_RX1_IRQHandler(void);
-void CAN_SCE_IRQHandler(void);
-void EXTI9_5_IRQHandler(void);
-void TIM1_BRK_IRQHandler(void);
-void TIM1_UP_IRQHandler(void);
-void TIM1_TRG_COM_IRQHandler(void);
-void TIM1_CC_IRQHandler(void);
-void TIM2_IRQHandler(void);
-void TIM3_IRQHandler(void);
-void TIM4_IRQHandler(void);
-void I2C1_EV_IRQHandler(void);
-void I2C1_ER_IRQHandler(void);
-void I2C2_EV_IRQHandler(void);
-void I2C2_ER_IRQHandler(void);
-void SPI1_IRQHandler(void);
-void SPI2_IRQHandler(void);
-void USART1_IRQHandler(void);
-void USART2_IRQHandler(void);
-void USART3_IRQHandler(void);
-void EXTI15_10_IRQHandler(void);
-void RTCAlarm_IRQHandler(void);
-void USBWakeUp_IRQHandler(void);
-void TIM8_BRK_IRQHandler(void);
-void TIM8_UP_IRQHandler(void);
-void TIM8_TRG_COM_IRQHandler(void);
-void TIM8_CC_IRQHandler(void);
-void ADC3_IRQHandler(void);
-void FSMC_IRQHandler(void);
-void SDIO_IRQHandler(void);
-void TIM5_IRQHandler(void);
-void SPI3_IRQHandler(void);
-void UART4_IRQHandler(void);
-void UART5_IRQHandler(void);
-void TIM6_IRQHandler(void);
-void TIM7_IRQHandler(void);
-void DMA2_Channel1_IRQHandler(void);
-void DMA2_Channel2_IRQHandler(void);
-void DMA2_Channel3_IRQHandler(void);
-void DMA2_Channel4_5_IRQHandler(void);
-
-#endif /* __STM32F10x_IT_H */
-
-/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
|