1 files changed, 0 insertions, 56 deletions
diff --git a/src/stm32lib/examples/FSMC/NAND/readme.txt b/src/stm32lib/examples/FSMC/NAND/readme.txt
deleted file mode 100755
index bd78bb4..0000000
--- a/src/stm32lib/examples/FSMC/NAND/readme.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : readme.txt
-* Author             : MCD Application Team
-* Version            : V2.0.1
-* Date               : 06/13/2008
-* Description        : Description of the FSMC NAND Example.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-Example description
-===================
-This example provides a basic example of how to use the FSMC firmware library and
-an associate driver to perform erase/read/write operations on the NAND512W3A2 memory
-mounted on STM3210E-EVAL board.
-
-
-Directory contents
-==================
-stm32f10x_conf.h    Library Configuration file
-stm32f10x_it.c      Interrupt handlers
-stm32f10x_it.h      Header for stm32f10x_it.c
-fsmc_nand.c         Driver for NAND memory
-fsmc_nand.h         Header for fsmc_nand.c 
-main.c              Main program
-
-
-Hardware environment
-====================
-This example runs on STMicroelectronics STM3210E-EVAL evaluation board RevD.
-
-Note: make sure that the Jumper 7 (JP7) is in position 1<-->2. 
-
-    
-How to use it
-=============
-In order to make the program work, you must do the following:
-- Create a project and setup all your toolchain's start-up files
-- Compile the directory content files and required Library files:
-  + stm32f10x_lib.c
-  + stm32f10x_gpio.c
-  + stm32f10x_rcc.c
-  + stm32f10x_nvic.c
-  + stm32f10x_flash.c
-  + stm32f10x_fsmc.c
-  
-- Link all compiled files and load your image into target memory
-- Run the example
-
-
-******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******