aboutsummaryrefslogtreecommitdiffstats
path: root/libmaple
diff options
context:
space:
mode:
Diffstat (limited to 'libmaple')
-rw-r--r--libmaple/adc.h37
-rw-r--r--libmaple/board_maple.h82
-rw-r--r--libmaple/exti.h8
-rw-r--r--libmaple/gpio.c5
-rw-r--r--libmaple/gpio.h3
-rw-r--r--libmaple/libmaple.h18
-rw-r--r--libmaple/nvic.c8
-rw-r--r--libmaple/nvic.h13
-rw-r--r--libmaple/rcc.c51
-rw-r--r--libmaple/rcc.h75
-rw-r--r--libmaple/spi.h1
-rw-r--r--libmaple/syscalls.c7
-rw-r--r--libmaple/timers.c38
-rw-r--r--libmaple/timers.h16
-rw-r--r--libmaple/usart.c35
-rw-r--r--libmaple/usart.h3
-rw-r--r--libmaple/usb/descriptors.h2
-rw-r--r--libmaple/usb/usb_config.h6
-rw-r--r--libmaple/usb/usb_hardware.h1
-rw-r--r--libmaple/util.c11
-rw-r--r--libmaple/util.h6
21 files changed, 311 insertions, 115 deletions
diff --git a/libmaple/adc.h b/libmaple/adc.h
index 11aa5f6..f98a5f2 100644
--- a/libmaple/adc.h
+++ b/libmaple/adc.h
@@ -43,29 +43,32 @@ extern "C"{
*
* Need to up the sample time if otherwise... see datasheet */
-/* We'll only use ADC1 for now... */
-#define ADC_BASE 0x40012400
-#define ADC_SR *(volatile uint32*)(ADC_BASE + 0)
-#define ADC_CR1 *(volatile uint32*)(ADC_BASE + 0x4)
-#define ADC_CR2 *(volatile uint32*)(ADC_BASE + 0x8)
-#define ADC_SMPR1 *(volatile uint32*)(ADC_BASE + 0xC)
-#define ADC_SMPR2 *(volatile uint32*)(ADC_BASE + 0x10)
-#define ADC_SQR1 *(volatile uint32*)(ADC_BASE + 0x2C)
-#define ADC_SQR3 *(volatile uint32*)(ADC_BASE + 0x34)
-#define ADC_DR *(volatile uint32*)(ADC_BASE + 0x4C)
+/* TODO: We'll only use ADC1 for now... */
+#define ADC1_BASE 0x40012400
+#define ADC2_BASE 0x40012400
+#define ADC3_BASE 0x40012400
+
+#define ADC_SR *(volatile uint32*)(ADC1_BASE + 0)
+#define ADC_CR1 *(volatile uint32*)(ADC1_BASE + 0x4)
+#define ADC_CR2 *(volatile uint32*)(ADC1_BASE + 0x8)
+#define ADC_SMPR1 *(volatile uint32*)(ADC1_BASE + 0xC)
+#define ADC_SMPR2 *(volatile uint32*)(ADC1_BASE + 0x10)
+#define ADC_SQR1 *(volatile uint32*)(ADC1_BASE + 0x2C)
+#define ADC_SQR3 *(volatile uint32*)(ADC1_BASE + 0x34)
+#define ADC_DR *(volatile uint32*)(ADC1_BASE + 0x4C)
#define CR2_EXTSEL_SWSTART (0xE << 16)
#define CR2_RSTCAL (BIT(3))
#define CR2_EXTTRIG (BIT(20))
/* Bit banded bits */
-#define CR2_ADON_BIT *(volatile uint32*)(BITBAND_PERI(ADC_BASE+0x8, 0))
-#define CR2_CAL_BIT *(volatile uint32*)(BITBAND_PERI(ADC_BASE+0x8, 2))
-#define CR2_RSTCAL_BIT *(volatile uint32*)(BITBAND_PERI(ADC_BASE+0x8, 3))
-#define CR2_SWSTART_BIT *(volatile uint32*)(BITBAND_PERI(ADC_BASE+0x8 + 2, 6))
-#define SR_EOC_BIT *(volatile uint32*)(BITBAND_PERI(ADC_BASE+0, 1))
+#define CR2_ADON_BIT *(volatile uint32*)(BITBAND_PERI(ADC1_BASE+0x8, 0))
+#define CR2_CAL_BIT *(volatile uint32*)(BITBAND_PERI(ADC1_BASE+0x8, 2))
+#define CR2_RSTCAL_BIT *(volatile uint32*)(BITBAND_PERI(ADC1_BASE+0x8, 3))
+#define CR2_SWSTART_BIT *(volatile uint32*)(BITBAND_PERI(ADC1_BASE+0x8 + 2, 6))
+#define SR_EOC_BIT *(volatile uint32*)(BITBAND_PERI(ADC1_BASE+0, 1))
-#define NR_ANALOG_PINS 29
+// NR_ANALOG_PINS is board specific
/* Initialize ADC1 to do one-shot conversions */
void adc_init(void);
@@ -88,8 +91,6 @@ static inline int adc_read(int channel) {
return ADC_DR;
}
-
-
#ifdef __cplusplus
} // extern "C"
#endif
diff --git a/libmaple/board_maple.h b/libmaple/board_maple.h
new file mode 100644
index 0000000..3cbf638
--- /dev/null
+++ b/libmaple/board_maple.h
@@ -0,0 +1,82 @@
+/* *****************************************************************************
+ * The MIT License
+ *
+ * Copyright (c) 2010 Bryan Newbold.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ * ****************************************************************************/
+
+// Board-specific settings file, included from libmaple.h based on the BOARD
+// environment variable.
+
+// See ../notes/portability.txt for more information
+
+#ifndef _BOARD_MAPLE_H_
+#define _BOARD_MAPLE_H_
+
+// ------------------------------------------------------------------------
+// Some settings probably need to be changed for every board
+
+// Number of GPIO ports (GPIOA, GPIOB, etc), definately used
+#define NR_GPIO_PORTS 4
+
+// Number of timer devices ports, definately used
+#define NR_TIMERS 4
+
+// Total number of GPIO pins
+#define NR_MAPLE_PINS 39
+
+// Number of ADC pins. Not actually used?
+#define NR_ANALOG_PINS 29
+
+// USB Identifier numbers
+// Descriptor strings must be modified by hand in usb/descriptors.c for now
+#define VCOM_ID_VENDOR 0x1EAF
+#define VCOM_ID_PRODUCT 0x0004
+#define USB_CONFIG_MAX_POWER (100 >> 1)
+#define RESET_DELAY (100)
+
+// Where to put usercode (based on space reserved for bootloader)
+#define USER_ADDR_ROM 0x08005000
+#define USER_ADDR_RAM 0x20000C00
+#define STACK_TOP 0x20000800
+
+// Debug port settings (from ASSERT)
+#define ERROR_LED_PORT GPIOA_BASE
+#define ERROR_LED_PIN 5
+#define ERROR_USART_NUM 2
+#define ERROR_USART_BAUD 9600
+#define ERROR_TX_PIN 2
+#define ERROR_TX_PORT GPIOA_BASE
+
+// ------------------------------------------------------------------------
+// Some settings are probably stable across the entire STM32 line
+
+// Just in case, most boards have at least some memory
+#ifndef RAMSIZE
+# define RAMSIZE (caddr_t)0x50000
+#endif
+
+#define BITBAND_SRAM_REF 0x20000000
+#define BITBAND_SRAM_BASE 0x22000000
+#define BITBAND_PERI_REF 0x40000000
+#define BITBAND_PERI_BASE 0x42000000
+
+#endif
+
diff --git a/libmaple/exti.h b/libmaple/exti.h
index fdba184..2832e24 100644
--- a/libmaple/exti.h
+++ b/libmaple/exti.h
@@ -94,12 +94,11 @@
* EXTI[5-9] -> EXT9_5
* EXTI[10-15] -> EXT15_10
*
- *
* */
-#define NR_EXTI_CHANNELS 16
-#define NR_EXTI_PORTS 4
#define NR_EXTI_MODES 3
+#define NR_EXTI_CHANNELS 16
+#define NR_EXTI_PORTS NR_GPIO_PORTS // board specific
#define EXTI_IMR 0x40010400 // Interrupt mask register
#define EXTI_EMR (EXTI_IMR + 0x04) // Event mask register
@@ -139,6 +138,9 @@
#define EXTI_CONFIG_PORTB 1
#define EXTI_CONFIG_PORTC 2
#define EXTI_CONFIG_PORTD 3
+#define EXTI_CONFIG_PORTE 4 // Native only
+#define EXTI_CONFIG_PORTF 5 // Native only
+#define EXTI_CONFIG_PORTG 6 // Native only
#ifdef __cplusplus
diff --git a/libmaple/gpio.c b/libmaple/gpio.c
index 3e05bd0..c5bb450 100644
--- a/libmaple/gpio.c
+++ b/libmaple/gpio.c
@@ -37,6 +37,11 @@ void gpio_init(void) {
rcc_clk_enable(RCC_GPIOB);
rcc_clk_enable(RCC_GPIOC);
rcc_clk_enable(RCC_GPIOD);
+ #if NR_GPIO_PORTS >= 7
+ rcc_clk_enable(RCC_GPIOE);
+ rcc_clk_enable(RCC_GPIOF);
+ rcc_clk_enable(RCC_GPIOG);
+ #endif
rcc_clk_enable(RCC_AFIO);
}
diff --git a/libmaple/gpio.h b/libmaple/gpio.h
index 74320e6..d1d0050 100644
--- a/libmaple/gpio.h
+++ b/libmaple/gpio.h
@@ -48,6 +48,9 @@
#define GPIOB_BASE (GPIO_Port*)0x40010C00
#define GPIOC_BASE (GPIO_Port*)0x40011000
#define GPIOD_BASE (GPIO_Port*)0x40011400
+#define GPIOE_BASE (GPIO_Port*)0x40011800 // High-density devices only
+#define GPIOF_BASE (GPIO_Port*)0x40011C00 // High-density devices only
+#define GPIOG_BASE (GPIO_Port*)0x40012000 // High-density devices only
#define GPIO_SPEED_50MHZ (0x3)
diff --git a/libmaple/libmaple.h b/libmaple/libmaple.h
index 5360b51..cf5802c 100644
--- a/libmaple/libmaple.h
+++ b/libmaple/libmaple.h
@@ -32,6 +32,24 @@
#define _LIBMAPLE_H_
#include "libmaple_types.h"
+
+// General configuration
+#define MAPLE_DEBUG 0
+
+#ifdef BOARD_maple
+ #include "board_maple.h"
+#endif
+/*
+#ifdef BOARD_maple-native
+ #include "board_maple_native.h"
+#endif
+
+#ifdef BOARD_maple-mini
+ #include "board_maple_mini.h"
+#endif
+*/
+
+// Requires board configuration info
#include "util.h"
#endif
diff --git a/libmaple/nvic.c b/libmaple/nvic.c
index 56b9940..7aef26d 100644
--- a/libmaple/nvic.c
+++ b/libmaple/nvic.c
@@ -44,8 +44,10 @@ void nvic_set_vector_table(uint32 addr, uint32 offset) {
void nvic_irq_enable(uint32 n) {
if (n < 32) {
REG_SET_BIT(NVIC_ISER0, n);
- } else {
+ } else if(n < 64) {
REG_SET_BIT(NVIC_ISER1, n - 32);
+ } else {
+ REG_SET_BIT(NVIC_ISER2, n - 64);
}
}
@@ -56,8 +58,10 @@ void nvic_irq_enable(uint32 n) {
void nvic_irq_disable(uint32 n) {
if (n < 32) {
REG_SET_BIT(NVIC_ICER0, n);
- } else {
+ } else if(n < 64) {
REG_SET_BIT(NVIC_ICER1, n - 32);
+ } else {
+ REG_SET_BIT(NVIC_ICER2, n - 64);
}
}
diff --git a/libmaple/nvic.h b/libmaple/nvic.h
index d256610..a24086a 100644
--- a/libmaple/nvic.h
+++ b/libmaple/nvic.h
@@ -38,13 +38,13 @@
#define NVIC_ISER0 0xE000E100
#define NVIC_ISER1 0xE000E104
#define NVIC_ISER2 0xE000E108
-#define NVIC_ISER3 0xE000E10C
+#define NVIC_ISER3 0xE000E10C // Non existant?
/* NVIC Interrupt Clear registers */
#define NVIC_ICER0 0xE000E180
#define NVIC_ICER1 0xE000E184
#define NVIC_ICER2 0xE000E188
-#define NVIC_ICER3 0xE000E18C
+#define NVIC_ICER3 0xE000E18C // Non existant?
/* System control registers */
#define SCB_VTOR 0xE000ED08 // Vector table offset register
@@ -52,10 +52,6 @@
#define NVIC_VectTab_RAM ((u32)0x20000000)
#define NVIC_VectTab_FLASH ((u32)0x08000000)
-/* Where to put code */
-#define USER_ADDR_ROM 0x08005000
-#define USER_ADDR_RAM 0x20000C00
-
#ifdef __cplusplus
extern "C"{
#endif
@@ -65,9 +61,14 @@ enum {
NVIC_TIMER2 = 28,
NVIC_TIMER3 = 29,
NVIC_TIMER4 = 30,
+ NVIC_TIMER5 = 50, // high density only (Maple Native)
+ NVIC_TIMER6 = 54, // high density only (Maple Native)
+ NVIC_TIMER7 = 55, // high density only (Maple Native)
NVIC_USART1 = 37,
NVIC_USART2 = 38,
NVIC_USART3 = 39,
+ NVIC_USART4 = 52, // high density only (Maple Native)
+ NVIC_USART5 = 53, // high density only (Maple Native)
};
diff --git a/libmaple/rcc.c b/libmaple/rcc.c
index ab62025..4ac6629 100644
--- a/libmaple/rcc.c
+++ b/libmaple/rcc.c
@@ -31,48 +31,6 @@
#include "flash.h"
#include "rcc.h"
-/* registers */
-#define RCC_BASE 0x40021000
-#define RCC_CR (RCC_BASE + 0x0)
-#define RCC_CFGR (RCC_BASE + 0x4)
-#define RCC_CIR (RCC_BASE + 0x8)
-#define RCC_APB2RSTR (RCC_BASE + 0xC)
-#define RCC_APB1RSTR (RCC_BASE + 0x10)
-#define RCC_AHBENR (RCC_BASE + 0x14)
-#define RCC_APB2ENR (RCC_BASE + 0x18)
-#define RCC_APB1ENR (RCC_BASE + 0x1C)
-#define RCC_BDCR (RCC_BASE + 0x20)
-#define RCC_CSR (RCC_BASE + 0x24)
-#define RCC_AHBSTR (RCC_BASE + 0x28)
-#define RCC_CFGR2 (RCC_BASE + 0x2C)
-
-#define RCC_CFGR_USBPRE (0x1 << 22)
-#define RCC_CFGR_ADCPRE (0x3 << 14)
-#define RCC_CFGR_PPRE1 (0x7 << 8)
-#define RCC_CFGR_PPRE2 (0x7 << 11)
-#define RCC_CFGR_HPRE (0xF << 4)
-#define RCC_CFGR_PLLSRC (0x1 << 16)
-
-#define RCC_CFGR_SWS (0x3 << 2)
-#define RCC_CFGR_SWS_PLL (0x2 << 2)
-#define RCC_CFGR_SWS_HSE (0x1 << 2)
-
-#define RCC_CFGR_SW (0x3 << 0)
-#define RCC_CFGR_SW_PLL (0x2 << 0)
-#define RCC_CFGR_SW_HSE (0x1 << 0)
-
-/* CR status bits */
-#define RCC_CR_HSEON (0x1 << 16)
-#define RCC_CR_HSERDY (0x1 << 17)
-#define RCC_CR_PLLON (0x1 << 24)
-#define RCC_CR_PLLRDY (0x1 << 25)
-
-#define RCC_WRITE_CFGR(val) __write(RCC_CFGR, val)
-#define RCC_READ_CFGR() __read(RCC_CFGR)
-
-#define RCC_WRITE_CR(val) __write(RCC_CR, val)
-#define RCC_READ_CR() __read(RCC_CR)
-
enum {
APB1,
APB2,
@@ -90,15 +48,24 @@ static const struct rcc_dev_info rcc_dev_table[] = {
[RCC_GPIOB] = { .clk_domain = APB2, .line_num = 3 },
[RCC_GPIOC] = { .clk_domain = APB2, .line_num = 4 },
[RCC_GPIOD] = { .clk_domain = APB2, .line_num = 5 },
+ [RCC_GPIOE] = { .clk_domain = APB2, .line_num = 6 }, // High-density devices only
+ [RCC_GPIOF] = { .clk_domain = APB2, .line_num = 7 }, // High-density devices only
+ [RCC_GPIOG] = { .clk_domain = APB2, .line_num = 8 }, // High-density devices only
[RCC_AFIO] = { .clk_domain = APB2, .line_num = 0 },
[RCC_ADC1] = { .clk_domain = APB2, .line_num = 9 },
+ [RCC_ADC2] = { .clk_domain = APB2, .line_num = 10 },
[RCC_USART1] = { .clk_domain = APB2, .line_num = 14 },
[RCC_USART2] = { .clk_domain = APB1, .line_num = 17 },
[RCC_USART3] = { .clk_domain = APB1, .line_num = 18 },
+ [RCC_USART4] = { .clk_domain = APB1, .line_num = 19 }, // High-density devices only
+ [RCC_USART5] = { .clk_domain = APB1, .line_num = 20 }, // High-density devices only
[RCC_TIMER1] = { .clk_domain = APB2, .line_num = 11 },
[RCC_TIMER2] = { .clk_domain = APB1, .line_num = 0 },
[RCC_TIMER3] = { .clk_domain = APB1, .line_num = 1 },
[RCC_TIMER4] = { .clk_domain = APB1, .line_num = 2 },
+ [RCC_TIMER5] = { .clk_domain = APB1, .line_num = 3 }, // High-density devices only
+ [RCC_TIMER6] = { .clk_domain = APB1, .line_num = 4 }, // High-density devices only
+ [RCC_TIMER7] = { .clk_domain = APB1, .line_num = 5 }, // High-density devices only
[RCC_SPI1] = { .clk_domain = APB2, .line_num = 12 },
[RCC_SPI2] = { .clk_domain = APB1, .line_num = 14 },
};
diff --git a/libmaple/rcc.h b/libmaple/rcc.h
index e6a28ea..b369f25 100644
--- a/libmaple/rcc.h
+++ b/libmaple/rcc.h
@@ -29,6 +29,48 @@
#ifndef _RCC_H_
#define _RCC_H_
+/* registers */
+#define RCC_BASE 0x40021000
+#define RCC_CR (RCC_BASE + 0x0)
+#define RCC_CFGR (RCC_BASE + 0x4)
+#define RCC_CIR (RCC_BASE + 0x8)
+#define RCC_APB2RSTR (RCC_BASE + 0xC)
+#define RCC_APB1RSTR (RCC_BASE + 0x10)
+#define RCC_AHBENR (RCC_BASE + 0x14)
+#define RCC_APB2ENR (RCC_BASE + 0x18)
+#define RCC_APB1ENR (RCC_BASE + 0x1C)
+#define RCC_BDCR (RCC_BASE + 0x20)
+#define RCC_CSR (RCC_BASE + 0x24)
+#define RCC_AHBSTR (RCC_BASE + 0x28)
+#define RCC_CFGR2 (RCC_BASE + 0x2C)
+
+#define RCC_CFGR_USBPRE (0x1 << 22)
+#define RCC_CFGR_ADCPRE (0x3 << 14)
+#define RCC_CFGR_PPRE1 (0x7 << 8)
+#define RCC_CFGR_PPRE2 (0x7 << 11)
+#define RCC_CFGR_HPRE (0xF << 4)
+#define RCC_CFGR_PLLSRC (0x1 << 16)
+
+#define RCC_CFGR_SWS (0x3 << 2)
+#define RCC_CFGR_SWS_PLL (0x2 << 2)
+#define RCC_CFGR_SWS_HSE (0x1 << 2)
+
+#define RCC_CFGR_SW (0x3 << 0)
+#define RCC_CFGR_SW_PLL (0x2 << 0)
+#define RCC_CFGR_SW_HSE (0x1 << 0)
+
+/* CR status bits */
+#define RCC_CR_HSEON (0x1 << 16)
+#define RCC_CR_HSERDY (0x1 << 17)
+#define RCC_CR_PLLON (0x1 << 24)
+#define RCC_CR_PLLRDY (0x1 << 25)
+
+#define RCC_WRITE_CFGR(val) __write(RCC_CFGR, val)
+#define RCC_READ_CFGR() __read(RCC_CFGR)
+
+#define RCC_WRITE_CR(val) __write(RCC_CR, val)
+#define RCC_READ_CR() __read(RCC_CR)
+
/* sysclk source */
#define RCC_CLKSRC_HSI (0x0)
#define RCC_CLKSRC_HSE (0x1)
@@ -87,36 +129,44 @@
#define RCC_PLLMUL_15 (0xD << 18)
#define RCC_PLLMUL_16 (0xE << 18)
-/* device numbers */
+
+/* prescalers */
+enum {
+ RCC_PRESCALER_AHB,
+ RCC_PRESCALER_APB1,
+ RCC_PRESCALER_APB2,
+ RCC_PRESCALER_USB,
+ RCC_PRESCALER_ADC
+};
+
+// RCC Devices
enum {
RCC_GPIOA,
RCC_GPIOB,
RCC_GPIOC,
RCC_GPIOD,
+ RCC_GPIOE, // High-density devices only (Maple Native)
+ RCC_GPIOF, // High-density devices only (Maple Native)
+ RCC_GPIOG, // High-density devices only (Maple Native)
RCC_AFIO,
RCC_ADC1,
+ RCC_ADC2,
RCC_USART1,
RCC_USART2,
RCC_USART3,
- RCC_USART4,
- RCC_USART5,
+ RCC_USART4, // High-density devices only (Maple Native)
+ RCC_USART5, // High-density devices only (Maple Native)
RCC_TIMER1,
RCC_TIMER2,
RCC_TIMER3,
RCC_TIMER4,
+ RCC_TIMER5, // High-density devices only (Maple Native)
+ RCC_TIMER6, // High-density devices only (Maple Native)
+ RCC_TIMER7, // High-density devices only (Maple Native)
RCC_SPI1,
RCC_SPI2,
};
-/* prescalers */
-enum {
- RCC_PRESCALER_AHB,
- RCC_PRESCALER_APB1,
- RCC_PRESCALER_APB2,
- RCC_PRESCALER_USB,
- RCC_PRESCALER_ADC
-};
-
void rcc_clk_init(uint32 sysclk_src, uint32 pll_src, uint32 pll_mul);
void rcc_clk_enable(uint32 dev);
@@ -125,4 +175,3 @@ void rcc_set_prescaler(uint32 prescaler, uint32 divider);
#endif
-
diff --git a/libmaple/spi.h b/libmaple/spi.h
index 25c2c6b..742c1d0 100644
--- a/libmaple/spi.h
+++ b/libmaple/spi.h
@@ -36,6 +36,7 @@ extern "C" {
/* peripheral addresses */
#define SPI1_BASE 0x40013000
#define SPI2_BASE 0x40003800
+#define SPI3_BASE 0x40003C00
/* baud rate prescaler bits */
#define CR1_BR 0x00000038
diff --git a/libmaple/syscalls.c b/libmaple/syscalls.c
index 63ebb1e..ec271a2 100644
--- a/libmaple/syscalls.c
+++ b/libmaple/syscalls.c
@@ -28,13 +28,6 @@
/* _end is set in the linker command file */
extern caddr_t _end;
-/* just in case, most boards have at least some memory */
-#ifndef RAMSIZE
-# define RAMSIZE (caddr_t)0x50000
-#endif
-
-#define STACK_TOP 0x20000800
-
void uart_send(const char*str);
/*
diff --git a/libmaple/timers.c b/libmaple/timers.c
index 6e6653c..6fa2848 100644
--- a/libmaple/timers.c
+++ b/libmaple/timers.c
@@ -28,6 +28,8 @@
* @brief General timer routines
*/
+// TODO: actually support timer5 and timer8
+
#include "libmaple.h"
#include "rcc.h"
#include "nvic.h"
@@ -82,6 +84,10 @@ volatile static voidFuncPtr timer1_handlers[4];
volatile static voidFuncPtr timer2_handlers[4];
volatile static voidFuncPtr timer3_handlers[4];
volatile static voidFuncPtr timer4_handlers[4];
+#if NR_TIMERS >= 8
+volatile static voidFuncPtr timer5_handlers[4]; // High-density devices only
+volatile static voidFuncPtr timer8_handlers[4]; // High-density devices only
+#endif
// This function should probably be rewriten to take (timer_num, mode) and have
// prescaler set elsewhere. The mode can be passed through to set_mode at the
@@ -110,6 +116,20 @@ void timer_init(uint8 timer_num, uint16 prescale) {
timer = (Timer*)TIMER4_BASE;
rcc_clk_enable(RCC_TIMER4);
break;
+ #if NR_TIMERS >= 8
+ case 5:
+ timer = (Timer*)TIMER5_BASE;
+ rcc_clk_enable(RCC_TIMER5);
+ break;
+ case 8:
+ timer = (Timer*)TIMER8_BASE;
+ rcc_clk_enable(RCC_TIMER8);
+ is_advanced = 1;
+ break;
+ #endif
+ default:
+ ASSERT(0);
+ return;
}
timer->CR1 = ARPE; // No clock division
@@ -172,6 +192,9 @@ void timer_pause(uint8 timer_num) {
case 4:
timer = (Timer*)TIMER4_BASE;
break;
+ default:
+ ASSERT(0);
+ return;
}
timer->CR1 &= ~(0x0001); // CEN
}
@@ -194,6 +217,9 @@ void timer_resume(uint8 timer_num) {
case 4:
timer = (Timer*)TIMER4_BASE;
break;
+ default:
+ ASSERT(0);
+ return;
}
timer->CR1 |= 0x0001; // CEN
}
@@ -218,6 +244,9 @@ ASSERT(timer_num > 0 && timer_num <= 4);
case 4:
timer = (Timer*)TIMER4_BASE;
break;
+ default:
+ ASSERT(0);
+ return;
}
timer->CNT = value;
}
@@ -241,6 +270,9 @@ uint16 timer_get_count(uint8 timer_num) {
case 4:
timer = (Timer*)TIMER4_BASE;
break;
+ default:
+ ASSERT(0);
+ return;
}
return timer->CNT;
}
@@ -263,6 +295,9 @@ void timer_set_prescaler(uint8 timer_num, uint16 prescale) {
case 4:
timer = (Timer*)TIMER4_BASE;
break;
+ default:
+ ASSERT(0);
+ return;
}
timer->PSC = prescale;
}
@@ -286,6 +321,9 @@ void timer_set_reload(uint8 timer_num, uint16 max_reload) {
case 4:
timer = (Timer*)TIMER4_BASE;
break;
+ default:
+ ASSERT(0);
+ return;
}
timer->ARR = max_reload;
}
diff --git a/libmaple/timers.h b/libmaple/timers.h
index c48ef42..c49a00e 100644
--- a/libmaple/timers.h
+++ b/libmaple/timers.h
@@ -89,6 +89,10 @@ typedef volatile uint32* TimerCCR;
#define TIMER2_BASE 0x40000000
#define TIMER3_BASE 0x40000400
#define TIMER4_BASE 0x40000800
+#define TIMER5_BASE 0x40000C00 // High-density devices only (Maple Native)
+#define TIMER6_BASE 0x40001000 // High-density devices only (Maple Native)
+#define TIMER7_BASE 0x40001400 // High-density devices only (Maple Native)
+#define TIMER8_BASE 0x40013400 // High-density devices only (Maple Native)
#define ARPE BIT(7) // Auto-reload preload enable
#define NOT_A_TIMER 0
@@ -116,6 +120,18 @@ typedef volatile uint32* TimerCCR;
#define TIMER4_CH3_CCR (TimerCCR)(TIMER4_BASE + 0x3C)
#define TIMER4_CH4_CCR (TimerCCR)(TIMER4_BASE + 0x40)
+// Timer5 and Timer8 are in high-density devices only (such as Maple Native).
+// Timer6 and Timer7 in these devices have no output compare pins.
+
+#define TIMER5_CH1_CCR (TimerCCR)(TIMER5_BASE + 0x34)
+#define TIMER5_CH2_CCR (TimerCCR)(TIMER5_BASE + 0x38)
+#define TIMER5_CH3_CCR (TimerCCR)(TIMER5_BASE + 0x3C)
+#define TIMER5_CH4_CCR (TimerCCR)(TIMER5_BASE + 0x40)
+
+#define TIMER8_CH1_CCR (TimerCCR)(TIMER8_BASE + 0x34)
+#define TIMER8_CH2_CCR (TimerCCR)(TIMER8_BASE + 0x38)
+#define TIMER8_CH3_CCR (TimerCCR)(TIMER8_BASE + 0x3C)
+#define TIMER8_CH4_CCR (TimerCCR)(TIMER8_BASE + 0x40)
#define TIMER_DISABLED 0
#define TIMER_PWM 1
diff --git a/libmaple/usart.c b/libmaple/usart.c
index 296a1fb..d08d3cf 100644
--- a/libmaple/usart.c
+++ b/libmaple/usart.c
@@ -36,6 +36,8 @@
#define USART1_BASE 0x40013800
#define USART2_BASE 0x40004400
#define USART3_BASE 0x40004800
+#define UART4_BASE 0x40004C00 // High-density devices only (Maple Native)
+#define UART5_BASE 0x40005000 // High-density devices only (Maple Native)
#define USART_UE BIT(13)
#define USART_M BIT(12)
@@ -61,6 +63,18 @@ struct usart_dev usart_dev_table[] = {
.rcc_dev_num = RCC_USART3,
.nvic_dev_num = NVIC_USART3
},
+ #if NR_USART >= 5
+ [UART4] = {
+ .base = (usart_port*)UART4_BASE,
+ .rcc_dev_num = RCC_UART4,
+ .nvic_dev_num = NVIC_UART4
+ },
+ [UART5] = {
+ .base = (usart_port*)UART5_BASE,
+ .rcc_dev_num = RCC_UART5,
+ .nvic_dev_num = NVIC_UART5
+ },
+ #endif
};
/* usart interrupt handlers */
@@ -75,6 +89,14 @@ void USART2_IRQHandler(void) {
void USART3_IRQHandler(void) {
rb_insert(&usart_dev_table[USART3].rb, (uint8)(((usart_port*)(USART3_BASE))->DR));
}
+#if NR_USART >= 5
+void UART4_IRQHandler(void) {
+ rb_insert(&usart_dev_table[UART4].rb, (uint8)(((usart_port*)(UART4_BASE))->DR));
+}
+void UART5_IRQHandler(void) {
+ rb_insert(&usart_dev_table[UART5].rb, (uint8)(((usart_port*)(UART5_BASE))->DR));
+}
+#endif
/**
* @brief Enable a USART in single buffer transmission mode, multibuffer
@@ -83,6 +105,7 @@ void USART3_IRQHandler(void) {
* @param baud Baud rate to be set at
*/
void usart_init(uint8 usart_num, uint32 baud) {
+ ASSERT(usart_num <= NR_USART);
usart_port *port;
ring_buffer *ring_buf;
@@ -121,6 +144,18 @@ void usart_init(uint8 usart_num, uint32 baud) {
port->CR1 |= USART_UE;
}
+/**
+ * @brief Turn off all USARTs.
+ */
+void usart_disable_all() {
+ usart_disable(1);
+ usart_disable(2);
+ usart_disable(3);
+ #if NR_USART >= 5
+ usart_disable(4);
+ usart_disable(5);
+ #endif
+}
/**
* @brief Turn off a USART.
diff --git a/libmaple/usart.h b/libmaple/usart.h
index beffa89..2bc472f 100644
--- a/libmaple/usart.h
+++ b/libmaple/usart.h
@@ -42,6 +42,8 @@ enum {
USART1,
USART2,
USART3,
+ UART4,
+ UART5,
};
/* peripheral register struct */
@@ -113,6 +115,7 @@ static inline void usart_reset_rx(uint8 usart_num) {
void usart_init(uint8 usart_num, uint32 baud);
void usart_disable(uint8 usart_num);
+void usart_disable_all();
void usart_putstr(uint8 usart_num, const char*);
void usart_putudec(uint8 usart_num, uint32 val);
diff --git a/libmaple/usb/descriptors.h b/libmaple/usb/descriptors.h
index 1efe8c1..6652942 100644
--- a/libmaple/usb/descriptors.h
+++ b/libmaple/usb/descriptors.h
@@ -16,7 +16,7 @@
#define USB_DEVICE_SUBCLASS_CDC 0x00
#define USB_CONFIG_ATTR_BUSPOWERED 0b10000000
-#define USB_CONFIG_ATTR_SELF_POWERED 0b11000000
+#define USB_CONFIG_ATTR_SELF_POWERED 0b11000000
#define EP_TYPE_INTERRUPT 0x03
#define EP_TYPE_BULK 0x02
diff --git a/libmaple/usb/usb_config.h b/libmaple/usb/usb_config.h
index 06c81ff..3aa01d5 100644
--- a/libmaple/usb/usb_config.h
+++ b/libmaple/usb/usb_config.h
@@ -5,12 +5,6 @@
#include "usb_lib.h"
-#define VCOM_ID_VENDOR 0x1EAF
-#define VCOM_ID_PRODUCT 0x0004
-
-#define USB_CONFIG_MAX_POWER (100 >> 1)
-#define RESET_DELAY (100)
-
/* choose addresses to give endpoints the max 64 byte buffers */
#define USB_BTABLE_ADDRESS 0x00
#define VCOM_CTRL_EPNUM 0x00
diff --git a/libmaple/usb/usb_hardware.h b/libmaple/usb/usb_hardware.h
index 208fa3a..e4a26b4 100644
--- a/libmaple/usb/usb_hardware.h
+++ b/libmaple/usb/usb_hardware.h
@@ -30,7 +30,6 @@
/* macro'd register and peripheral definitions */
#define EXC_RETURN 0xFFFFFFF9
#define DEFAULT_CPSR 0x61000000
-#define STACK_TOP 0x20005000
#define RCC ((u32)0x40021000)
#define FLASH ((u32)0x40022000)
diff --git a/libmaple/util.c b/libmaple/util.c
index 36173ee..08e29fc 100644
--- a/libmaple/util.c
+++ b/libmaple/util.c
@@ -36,13 +36,6 @@
#include "adc.h"
#include "timers.h"
-#define ERROR_LED_PORT GPIOA_BASE
-#define ERROR_LED_PIN 5
-#define ERROR_USART_NUM 2
-#define ERROR_USART_BAUD 9600
-#define ERROR_TX_PIN 2
-#define ERROR_TX_PORT GPIOA_BASE
-
/* Error assert + fade */
void _fail(const char* file, int line, const char* exp) {
int32 slope = 1;
@@ -60,9 +53,7 @@ void _fail(const char* file, int line, const char* exp) {
adc_disable();
/* Turn off all usarts */
- usart_disable(1);
- usart_disable(2);
- usart_disable(3);
+ usart_disable_all();
/* Initialize the error usart */
gpio_set_mode(ERROR_TX_PORT, ERROR_TX_PIN, GPIO_MODE_AF_OUTPUT_PP);
diff --git a/libmaple/util.h b/libmaple/util.h
index c336e21..053731a 100644
--- a/libmaple/util.h
+++ b/libmaple/util.h
@@ -32,8 +32,6 @@
#ifndef _UTIL_H_
#define _UTIL_H_
-#define MAPLE_DEBUG 0
-
#define BIT(shift) (1 << (shift))
#define BIT_MASK_SHIFT(mask, shift) ((mask) << (shift))
@@ -41,11 +39,7 @@
#define GET_BITS(x, m, n) ((((uint32)x) << (31 - (n))) >> ((31 - (n)) + (m)))
/* Bit-banding macros */
-#define BITBAND_SRAM_REF 0x20000000
-#define BITBAND_SRAM_BASE 0x22000000
#define BITBAND_SRAM(a,b) ((BITBAND_SRAM_BASE + (a-BITBAND_SRAM_REF)*32 + (b*4))) // Convert SRAM address
-#define BITBAND_PERI_REF 0x40000000
-#define BITBAND_PERI_BASE 0x42000000
#define BITBAND_PERI(a,b) ((BITBAND_PERI_BASE + (a-BITBAND_PERI_REF)*32 + (b*4))) // Convert PERI address
#define REG_SET(reg, val) (*(volatile uint32*)(reg) = (val))
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 10:28:18 +0000