diff options
Diffstat (limited to 'libmaple/stm32f1/include')
| -rw-r--r-- | libmaple/stm32f1/include/series/adc.h | 254 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/dac.h | 71 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/dma.h | 565 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/exti.h | 46 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/flash.h | 149 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/gpio.h | 493 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/i2c.h | 85 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/nvic.h | 173 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/pwr.h | 52 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/rcc.h | 599 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/spi.h | 99 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/stm32.h | 212 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/timer.h | 128 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/usart.h | 76 |
14 files changed, 3002 insertions, 0 deletions
diff --git a/libmaple/stm32f1/include/series/adc.h b/libmaple/stm32f1/include/series/adc.h new file mode 100644 index 0000000..774c97c --- /dev/null +++ b/libmaple/stm32f1/include/series/adc.h @@ -0,0 +1,254 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * Copyright (c) 2010 Perry Hung. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/adc.h + * @author Marti Bolivar <mbolivar@leaflabs.com>, + * Perry Hung <perry@leaflabs.com> + * @brief STM32F1 ADC header. + */ + +#ifndef _LIBMAPLE_STM32F1_ADC_H_ +#define _LIBMAPLE_STM32F1_ADC_H_ + +#include <libmaple/bitband.h> +#include <libmaple/libmaple_types.h> +#include <libmaple/rcc.h> /* For the prescalers */ + +/* + * Devices + */ + +extern const struct adc_dev *ADC1; +extern const struct adc_dev *ADC2; +#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY) +extern const struct adc_dev *ADC3; +#endif + +/* + * Register map base pointers + */ + +/** ADC1 register map base pointer. */ +#define ADC1_BASE ((struct adc_reg_map*)0x40012400) +/** ADC2 register map base pointer. */ +#define ADC2_BASE ((struct adc_reg_map*)0x40012800) +/** ADC3 register map base pointer. */ +#define ADC3_BASE ((struct adc_reg_map*)0x40013C00) + +/* + * Register bit definitions + */ + +/* Control register 2 */ + +#define ADC_CR2_ADON_BIT 0 +#define ADC_CR2_CONT_BIT 1 +#define ADC_CR2_CAL_BIT 2 +#define ADC_CR2_RSTCAL_BIT 3 +#define ADC_CR2_DMA_BIT 8 +#define ADC_CR2_ALIGN_BIT 11 +#define ADC_CR2_JEXTTRIG_BIT 15 +#define ADC_CR2_EXTTRIG_BIT 20 +#define ADC_CR2_JSWSTART_BIT 21 +#define ADC_CR2_SWSTART_BIT 22 +#define ADC_CR2_TSEREFE_BIT 23 + +#define ADC_CR2_ADON (1U << ADC_CR2_ADON_BIT) +#define ADC_CR2_CONT (1U << ADC_CR2_CONT_BIT) +#define ADC_CR2_CAL (1U << ADC_CR2_CAL_BIT) +#define ADC_CR2_RSTCAL (1U << ADC_CR2_RSTCAL_BIT) +#define ADC_CR2_DMA (1U << ADC_CR2_DMA_BIT) +#define ADC_CR2_ALIGN (1U << ADC_CR2_ALIGN_BIT) +#define ADC_CR2_JEXTSEL 0x7000 +#define ADC_CR2_JEXTTRIG (1U << ADC_CR2_JEXTTRIG_BIT) +#define ADC_CR2_EXTSEL 0xE0000 +#define ADC_CR2_EXTTRIG (1U << ADC_CR2_EXTTRIG_BIT) +#define ADC_CR2_JSWSTART (1U << ADC_CR2_JSWSTART_BIT) +#define ADC_CR2_SWSTART (1U << ADC_CR2_SWSTART_BIT) +#define ADC_CR2_TSEREFE (1U << ADC_CR2_TSEREFE_BIT) + +/* + * Other types + */ + +/** + * @brief STM32F1 external event selectors for regular group + * conversion. + * + * Some external events are only available on ADCs 1 and 2, others + * only on ADC3, while others are available on all three ADCs. + * Additionally, some events are only available on high- and + * XL-density STM32F1 MCUs, as they use peripherals only available on + * those MCU densities. + * + * For ease of use, each event selector is given along with the ADCs + * it's available on, along with any other availability restrictions. + * + * @see adc_set_extsel() + */ +typedef enum adc_extsel_event { + /* TODO: Smarten this up a bit, as follows. + * + * The EXTSEL bits on F1 are a little brain-damaged in that the + * TIM8 TRGO event has different bits depending on whether you're + * using ADC1/2 or ADC3. We route around this by declaring two + * enumerators, ADC_EXT_EV_ADC12_TIM8_TRGO and + * ADC_EXT_EV_ADC3_TIM8_TRGO. + * + * The right thing to do is to provide a single + * ADC_EXT_EV_TIM8_TRGO enumerator and override adc_set_extsel on + * STM32F1 to handle this situation correctly. We can do that + * later, though, and change the per-ADC enumerator values to + * ADC_EXT_EV_TIM8_TRGO to preserve compatibility. */ + + /* ADC1 and ADC2 only: */ + ADC_EXT_EV_TIM1_CC1 = 0x00000, /**< ADC1, ADC2: Timer 1 CC1 event */ + ADC_EXT_EV_TIM1_CC2 = 0x20000, /**< ADC1, ADC2: Timer 1 CC2 event */ + ADC_EXT_EV_TIM2_CC2 = 0x60000, /**< ADC1, ADC2: Timer 2 CC2 event */ + ADC_EXT_EV_TIM3_TRGO = 0x80000, /**< ADC1, ADC2: Timer 3 TRGO event */ + ADC_EXT_EV_TIM4_CC4 = 0xA0000, /**< ADC1, ADC2: Timer 4 CC4 event */ + ADC_EXT_EV_EXTI11 = 0xC0000, /**< ADC1, ADC2: EXTI11 event */ + + /* Common: */ + ADC_EXT_EV_TIM1_CC3 = 0x40000, /**< ADC1, ADC2, ADC3: Timer 1 CC3 event */ + ADC_EXT_EV_SWSTART = 0xE0000, /**< ADC1, ADC2, ADC3: Software start */ + + /* HD only: */ + ADC_EXT_EV_TIM3_CC1 = 0x00000, /**< + * ADC3: Timer 3 CC1 event + * Availability: high- and XL-density. */ + ADC_EXT_EV_TIM2_CC3 = 0x20000, /**< + * ADC3: Timer 2 CC3 event + * Availability: high- and XL-density. */ + ADC_EXT_EV_TIM8_CC1 = 0x60000, /**< + * ADC3: Timer 8 CC1 event + * Availability: high- and XL-density. */ + ADC_EXT_EV_ADC3_TIM8_TRGO = 0x80000, /**< + * ADC3: Timer 8 TRGO event + * Availability: high- and XL-density. */ + ADC_EXT_EV_TIM5_CC1 = 0xA0000, /**< + * ADC3: Timer 5 CC1 event + * Availability: high- and XL-density. */ + ADC_EXT_EV_ADC12_TIM8_TRGO = 0xC0000, /**< + * ADC1, ADC2: Timer 8 TRGO event + * Availability: high- and XL-density. */ + ADC_EXT_EV_TIM5_CC3 = 0xC0000, /**< + * ADC3: Timer 5 CC3 event + * Availability: high- and XL-density. */ +} adc_extsel_event; + +/* We'll keep these old adc_extsel_event enumerators around for a + * while, for backwards compatibility: */ +/** Deprecated. Use ADC_EXT_EV_TIM1_CC1 instead. */ +#define ADC_ADC12_TIM1_CC1 ADC_EXT_EV_TIM1_CC1 +/** Deprecated. Use ADC_EXT_EV_TIM1_CC2 instead. */ +#define ADC_ADC12_TIM1_CC2 ADC_EXT_EV_TIM1_CC2 +/** Deprecated. Use ADC_EXT_EV_TIM1_CC3 instead. */ +#define ADC_ADC12_TIM1_CC3 ADC_EXT_EV_TIM1_CC3 +/** Deprecated. Use ADC_EXT_EV_TIM2_CC2 instead. */ +#define ADC_ADC12_TIM2_CC2 ADC_EXT_EV_TIM2_CC2 +/** Deprecated. Use ADC_EXT_EV_TIM3_TRGO instead. */ +#define ADC_ADC12_TIM3_TRGO ADC_EXT_EV_TIM3_TRGO +/** Deprecated. Use ADC_EXT_EV_TIM4_CC4 instead. */ +#define ADC_ADC12_TIM4_CC4 ADC_EXT_EV_TIM4_CC4 +/** Deprecated. Use ADC_EXT_EV_EXTI11 instead. */ +#define ADC_ADC12_EXTI11 ADC_EXT_EV_EXTI11 +/** Deprecated. Use ADC_EXT_EV_ADC12_TIM8_TRGO instead. */ +#define ADC_ADC12_TIM8_TRGO ADC_EXT_EV_ADC12_TIM8_TRGO +/** Deprecated. Use ADC_EXT_EV_SWSTART instead. */ +#define ADC_ADC12_SWSTART ADC_EXT_EV_SWSTART +/** Deprecated. Use ADC_EXT_EV_TIM1_CC1 instead. */ +#define ADC_ADC3_TIM3_CC1 ADC_EXT_EV_TIM1_CC1 +/** Deprecated. Use ADC_EXT_EV_TIM1_CC2 instead. */ +#define ADC_ADC3_TIM2_CC3 ADC_EXT_EV_TIM1_CC2 +/** Deprecated. Use ADC_EXT_EV_TIM1_CC3 instead. */ +#define ADC_ADC3_TIM1_CC3 ADC_EXT_EV_TIM1_CC3 +/** Deprecated. Use ADC_EXT_EV_TIM2_CC2 instead. */ +#define ADC_ADC3_TIM8_CC1 ADC_EXT_EV_TIM2_CC2 +/** Deprecated. Use ADC_EXT_EV_TIM3_TRGO instead. */ +#define ADC_ADC3_TIM8_TRGO ADC_EXT_EV_TIM3_TRGO +/** Deprecated. Use ADC_EXT_EV_TIM4_CC4 instead. */ +#define ADC_ADC3_TIM5_CC1 ADC_EXT_EV_TIM4_CC4 +/** Deprecated. Use ADC_EXT_EV_EXTI11 instead. */ +#define ADC_ADC3_TIM5_CC3 ADC_EXT_EV_EXTI11 +/** Deprecated. Use ADC_EXT_EV_TIM8_TRGO instead. */ +#define ADC_ADC3_SWSTART ADC_EXT_EV_TIM8_TRGO +/** Deprecated. Use ADC_EXT_EV_SWSTART instead. */ +#define ADC_SWSTART ADC_EXT_EV_SWSTART + +/** + * @brief STM32F1 sample times, in ADC clock cycles. + * + * These control the amount of time spent sampling the input voltage. + * + * IMPORTANT: maximum external impedance must be below 0.4kOhms for + * 1.5 cycle sampling time. At 55.5 cycles/sample, the external input + * impedance must be at most 50kOhms. See your device's datasheet for + * more information. + */ +typedef enum adc_smp_rate { + ADC_SMPR_1_5, /**< 1.5 ADC cycles */ + ADC_SMPR_7_5, /**< 7.5 ADC cycles */ + ADC_SMPR_13_5, /**< 13.5 ADC cycles */ + ADC_SMPR_28_5, /**< 28.5 ADC cycles */ + ADC_SMPR_41_5, /**< 41.5 ADC cycles */ + ADC_SMPR_55_5, /**< 55.5 ADC cycles */ + ADC_SMPR_71_5, /**< 71.5 ADC cycles */ + ADC_SMPR_239_5, /**< 239.5 ADC cycles */ +} adc_smp_rate; + +/** + * @brief STM32F1 ADC prescalers, as divisors of PCLK2. + */ +typedef enum adc_prescaler { + ADC_PRE_PCLK2_DIV_2 = RCC_ADCPRE_PCLK_DIV_2, /** PCLK2 divided by 2 */ + ADC_PRE_PCLK2_DIV_4 = RCC_ADCPRE_PCLK_DIV_4, /** PCLK2 divided by 4 */ + ADC_PRE_PCLK2_DIV_6 = RCC_ADCPRE_PCLK_DIV_6, /** PCLK2 divided by 6 */ + ADC_PRE_PCLK2_DIV_8 = RCC_ADCPRE_PCLK_DIV_8, /** PCLK2 divided by 8 */ +} adc_prescaler; + +/* + * Routines + */ + +void adc_calibrate(const adc_dev *dev); + +/** + * @brief Set external trigger conversion mode event for regular channels + * + * Availability: STM32F1. + * + * @param dev ADC device + * @param enable If 1, conversion on external events is enabled; if 0, + * disabled. + */ +static inline void adc_set_exttrig(const adc_dev *dev, uint8 enable) { + *bb_perip(&dev->regs->CR2, ADC_CR2_EXTTRIG_BIT) = !!enable; +} + +#endif diff --git a/libmaple/stm32f1/include/series/dac.h b/libmaple/stm32f1/include/series/dac.h new file mode 100644 index 0000000..c0d026b --- /dev/null +++ b/libmaple/stm32f1/include/series/dac.h @@ -0,0 +1,71 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/dac.h + * @brief STM32F1 DAC support + */ + +#ifndef _LIBMAPLE_STM32F1_DAC_H_ +#define _LIBMAPLE_STM32F1_DAC_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/libmaple_types.h> + +/** STM32F1 DAC register map type. */ +typedef struct dac_reg_map { + __io uint32 CR; /**< Control register */ + __io uint32 SWTRIGR; /**< Software trigger register */ + __io uint32 DHR12R1; /**< Channel 1 12-bit right-aligned data + holding register */ + __io uint32 DHR12L1; /**< Channel 1 12-bit left-aligned data + holding register */ + __io uint32 DHR8R1; /**< Channel 1 8-bit left-aligned data + holding register */ + __io uint32 DHR12R2; /**< Channel 2 12-bit right-aligned data + holding register */ + __io uint32 DHR12L2; /**< Channel 2 12-bit left-aligned data + holding register */ + __io uint32 DHR8R2; /**< Channel 2 8-bit left-aligned data + holding register */ + __io uint32 DHR12RD; /**< Dual DAC 12-bit right-aligned data + holding register */ + __io uint32 DHR12LD; /**< Dual DAC 12-bit left-aligned data + holding register */ + __io uint32 DHR8RD; /**< Dual DAC 8-bit right-aligned data holding + register */ + __io uint32 DOR1; /**< Channel 1 data output register */ + __io uint32 DOR2; /**< Channel 2 data output register */ +} dac_reg_map; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/dma.h b/libmaple/stm32f1/include/series/dma.h new file mode 100644 index 0000000..3b19e2b --- /dev/null +++ b/libmaple/stm32f1/include/series/dma.h @@ -0,0 +1,565 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Michael Hope. + * Copyright (c) 2012 LeafLabs, LLC + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/dma.h + * @author Marti Bolivar <mbolivar@leaflabs.com>; + * Original implementation by Michael Hope + * @brief STM32F1 DMA series header. + */ + +/* + * See /notes/dma-stm32f1.txt for more information. + */ + +#ifndef _LIBMAPLE_STM32F1_DMA_H_ +#define _LIBMAPLE_STM32F1_DMA_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/libmaple_types.h> +#include <libmaple/dma_common.h> + +/* + * Register maps and base pointers + */ + +/** + * @brief STM32F1 DMA register map type. + * + * Note that DMA controller 2 (register map base pointer DMA2_BASE) + * only supports channels 1--5. + */ +typedef struct dma_reg_map { + __io uint32 ISR; /**< Interrupt status register */ + __io uint32 IFCR; /**< Interrupt flag clear register */ + __io uint32 CCR1; /**< Channel 1 configuration register */ + __io uint32 CNDTR1; /**< Channel 1 number of data register */ + __io uint32 CPAR1; /**< Channel 1 peripheral address register */ + __io uint32 CMAR1; /**< Channel 1 memory address register */ + const uint32 RESERVED1; /**< Reserved. */ + __io uint32 CCR2; /**< Channel 2 configuration register */ + __io uint32 CNDTR2; /**< Channel 2 number of data register */ + __io uint32 CPAR2; /**< Channel 2 peripheral address register */ + __io uint32 CMAR2; /**< Channel 2 memory address register */ + const uint32 RESERVED2; /**< Reserved. */ + __io uint32 CCR3; /**< Channel 3 configuration register */ + __io uint32 CNDTR3; /**< Channel 3 number of data register */ + __io uint32 CPAR3; /**< Channel 3 peripheral address register */ + __io uint32 CMAR3; /**< Channel 3 memory address register */ + const uint32 RESERVED3; /**< Reserved. */ + __io uint32 CCR4; /**< Channel 4 configuration register */ + __io uint32 CNDTR4; /**< Channel 4 number of data register */ + __io uint32 CPAR4; /**< Channel 4 peripheral address register */ + __io uint32 CMAR4; /**< Channel 4 memory address register */ + const uint32 RESERVED4; /**< Reserved. */ + __io uint32 CCR5; /**< Channel 5 configuration register */ + __io uint32 CNDTR5; /**< Channel 5 number of data register */ + __io uint32 CPAR5; /**< Channel 5 peripheral address register */ + __io uint32 CMAR5; /**< Channel 5 memory address register */ + const uint32 RESERVED5; /**< Reserved. */ + __io uint32 CCR6; /**< Channel 6 configuration register */ + __io uint32 CNDTR6; /**< Channel 6 number of data register */ + __io uint32 CPAR6; /**< Channel 6 peripheral address register */ + __io uint32 CMAR6; /**< Channel 6 memory address register */ + const uint32 RESERVED6; /**< Reserved. */ + __io uint32 CCR7; /**< Channel 7 configuration register */ + __io uint32 CNDTR7; /**< Channel 7 number of data register */ + __io uint32 CPAR7; /**< Channel 7 peripheral address register */ + __io uint32 CMAR7; /**< Channel 7 memory address register */ + const uint32 RESERVED7; /**< Reserved. */ +} dma_reg_map; + +/** DMA controller 1 register map base pointer */ +#define DMA1_BASE ((struct dma_reg_map*)0x40020000) +/** DMA controller 2 register map base pointer */ +#define DMA2_BASE ((struct dma_reg_map*)0x40020400) + +/** + * @brief STM32F1 DMA channel (i.e. tube) register map type. + * Provides access to an individual channel's registers. + * @see dma_tube_regs() + */ +typedef struct dma_tube_reg_map { + __io uint32 CCR; /**< Channel configuration register */ + __io uint32 CNDTR; /**< Channel number of data register */ + __io uint32 CPAR; /**< Channel peripheral address register */ + __io uint32 CMAR; /**< Channel memory address register */ +} dma_tube_reg_map; + +/** DMA1 channel 1 register map base pointer */ +#define DMA1CH1_BASE ((struct dma_tube_reg_map*)0x40020008) +/** DMA1 channel 2 register map base pointer */ +#define DMA1CH2_BASE ((struct dma_tube_reg_map*)0x4002001C) +/** DMA1 channel 3 register map base pointer */ +#define DMA1CH3_BASE ((struct dma_tube_reg_map*)0x40020030) +/** DMA1 channel 4 register map base pointer */ +#define DMA1CH4_BASE ((struct dma_tube_reg_map*)0x40020044) +/** DMA1 channel 5 register map base pointer */ +#define DMA1CH5_BASE ((struct dma_tube_reg_map*)0x40020058) +/** DMA1 channel 6 register map base pointer */ +#define DMA1CH6_BASE ((struct dma_tube_reg_map*)0x4002006C) +/** DMA1 channel 7 register map base pointer */ +#define DMA1CH7_BASE ((struct dma_tube_reg_map*)0x40020080) + +/** DMA2 channel 1 register map base pointer */ +#define DMA2CH1_BASE ((struct dma_tube_reg_map*)0x40020408) +/** DMA2 channel 2 register map base pointer */ +#define DMA2CH2_BASE ((struct dma_tube_reg_map*)0x4002041C) +/** DMA2 channel 3 register map base pointer */ +#define DMA2CH3_BASE ((struct dma_tube_reg_map*)0x40020430) +/** DMA2 channel 4 register map base pointer */ +#define DMA2CH4_BASE ((struct dma_tube_reg_map*)0x40020444) +/** DMA2 channel 5 register map base pointer */ +#define DMA2CH5_BASE ((struct dma_tube_reg_map*)0x40020458) + +/* + * Register bit definitions + */ + +/* Interrupt status register */ + +#define DMA_ISR_TEIF7_BIT 27 +#define DMA_ISR_HTIF7_BIT 26 +#define DMA_ISR_TCIF7_BIT 25 +#define DMA_ISR_GIF7_BIT 24 +#define DMA_ISR_TEIF6_BIT 23 +#define DMA_ISR_HTIF6_BIT 22 +#define DMA_ISR_TCIF6_BIT 21 +#define DMA_ISR_GIF6_BIT 20 +#define DMA_ISR_TEIF5_BIT 19 +#define DMA_ISR_HTIF5_BIT 18 +#define DMA_ISR_TCIF5_BIT 17 +#define DMA_ISR_GIF5_BIT 16 +#define DMA_ISR_TEIF4_BIT 15 +#define DMA_ISR_HTIF4_BIT 14 +#define DMA_ISR_TCIF4_BIT 13 +#define DMA_ISR_GIF4_BIT 12 +#define DMA_ISR_TEIF3_BIT 11 +#define DMA_ISR_HTIF3_BIT 10 +#define DMA_ISR_TCIF3_BIT 9 +#define DMA_ISR_GIF3_BIT 8 +#define DMA_ISR_TEIF2_BIT 7 +#define DMA_ISR_HTIF2_BIT 6 +#define DMA_ISR_TCIF2_BIT 5 +#define DMA_ISR_GIF2_BIT 4 +#define DMA_ISR_TEIF1_BIT 3 +#define DMA_ISR_HTIF1_BIT 2 +#define DMA_ISR_TCIF1_BIT 1 +#define DMA_ISR_GIF1_BIT 0 + +#define DMA_ISR_TEIF7 (1U << DMA_ISR_TEIF7_BIT) +#define DMA_ISR_HTIF7 (1U << DMA_ISR_HTIF7_BIT) +#define DMA_ISR_TCIF7 (1U << DMA_ISR_TCIF7_BIT) +#define DMA_ISR_GIF7 (1U << DMA_ISR_GIF7_BIT) +#define DMA_ISR_TEIF6 (1U << DMA_ISR_TEIF6_BIT) +#define DMA_ISR_HTIF6 (1U << DMA_ISR_HTIF6_BIT) +#define DMA_ISR_TCIF6 (1U << DMA_ISR_TCIF6_BIT) +#define DMA_ISR_GIF6 (1U << DMA_ISR_GIF6_BIT) +#define DMA_ISR_TEIF5 (1U << DMA_ISR_TEIF5_BIT) +#define DMA_ISR_HTIF5 (1U << DMA_ISR_HTIF5_BIT) +#define DMA_ISR_TCIF5 (1U << DMA_ISR_TCIF5_BIT) +#define DMA_ISR_GIF5 (1U << DMA_ISR_GIF5_BIT) +#define DMA_ISR_TEIF4 (1U << DMA_ISR_TEIF4_BIT) +#define DMA_ISR_HTIF4 (1U << DMA_ISR_HTIF4_BIT) +#define DMA_ISR_TCIF4 (1U << DMA_ISR_TCIF4_BIT) +#define DMA_ISR_GIF4 (1U << DMA_ISR_GIF4_BIT) +#define DMA_ISR_TEIF3 (1U << DMA_ISR_TEIF3_BIT) +#define DMA_ISR_HTIF3 (1U << DMA_ISR_HTIF3_BIT) +#define DMA_ISR_TCIF3 (1U << DMA_ISR_TCIF3_BIT) +#define DMA_ISR_GIF3 (1U << DMA_ISR_GIF3_BIT) +#define DMA_ISR_TEIF2 (1U << DMA_ISR_TEIF2_BIT) +#define DMA_ISR_HTIF2 (1U << DMA_ISR_HTIF2_BIT) +#define DMA_ISR_TCIF2 (1U << DMA_ISR_TCIF2_BIT) +#define DMA_ISR_GIF2 (1U << DMA_ISR_GIF2_BIT) +#define DMA_ISR_TEIF1 (1U << DMA_ISR_TEIF1_BIT) +#define DMA_ISR_HTIF1 (1U << DMA_ISR_HTIF1_BIT) +#define DMA_ISR_TCIF1 (1U << DMA_ISR_TCIF1_BIT) +#define DMA_ISR_GIF1 (1U << DMA_ISR_GIF1_BIT) + +/* Interrupt flag clear register */ + +#define DMA_IFCR_CTEIF7_BIT 27 +#define DMA_IFCR_CHTIF7_BIT 26 +#define DMA_IFCR_CTCIF7_BIT 25 +#define DMA_IFCR_CGIF7_BIT 24 +#define DMA_IFCR_CTEIF6_BIT 23 +#define DMA_IFCR_CHTIF6_BIT 22 +#define DMA_IFCR_CTCIF6_BIT 21 +#define DMA_IFCR_CGIF6_BIT 20 +#define DMA_IFCR_CTEIF5_BIT 19 +#define DMA_IFCR_CHTIF5_BIT 18 +#define DMA_IFCR_CTCIF5_BIT 17 +#define DMA_IFCR_CGIF5_BIT 16 +#define DMA_IFCR_CTEIF4_BIT 15 +#define DMA_IFCR_CHTIF4_BIT 14 +#define DMA_IFCR_CTCIF4_BIT 13 +#define DMA_IFCR_CGIF4_BIT 12 +#define DMA_IFCR_CTEIF3_BIT 11 +#define DMA_IFCR_CHTIF3_BIT 10 +#define DMA_IFCR_CTCIF3_BIT 9 +#define DMA_IFCR_CGIF3_BIT 8 +#define DMA_IFCR_CTEIF2_BIT 7 +#define DMA_IFCR_CHTIF2_BIT 6 +#define DMA_IFCR_CTCIF2_BIT 5 +#define DMA_IFCR_CGIF2_BIT 4 +#define DMA_IFCR_CTEIF1_BIT 3 +#define DMA_IFCR_CHTIF1_BIT 2 +#define DMA_IFCR_CTCIF1_BIT 1 +#define DMA_IFCR_CGIF1_BIT 0 + +#define DMA_IFCR_CTEIF7 (1U << DMA_IFCR_CTEIF7_BIT) +#define DMA_IFCR_CHTIF7 (1U << DMA_IFCR_CHTIF7_BIT) +#define DMA_IFCR_CTCIF7 (1U << DMA_IFCR_CTCIF7_BIT) +#define DMA_IFCR_CGIF7 (1U << DMA_IFCR_CGIF7_BIT) +#define DMA_IFCR_CTEIF6 (1U << DMA_IFCR_CTEIF6_BIT) +#define DMA_IFCR_CHTIF6 (1U << DMA_IFCR_CHTIF6_BIT) +#define DMA_IFCR_CTCIF6 (1U << DMA_IFCR_CTCIF6_BIT) +#define DMA_IFCR_CGIF6 (1U << DMA_IFCR_CGIF6_BIT) +#define DMA_IFCR_CTEIF5 (1U << DMA_IFCR_CTEIF5_BIT) +#define DMA_IFCR_CHTIF5 (1U << DMA_IFCR_CHTIF5_BIT) +#define DMA_IFCR_CTCIF5 (1U << DMA_IFCR_CTCIF5_BIT) +#define DMA_IFCR_CGIF5 (1U << DMA_IFCR_CGIF5_BIT) +#define DMA_IFCR_CTEIF4 (1U << DMA_IFCR_CTEIF4_BIT) +#define DMA_IFCR_CHTIF4 (1U << DMA_IFCR_CHTIF4_BIT) +#define DMA_IFCR_CTCIF4 (1U << DMA_IFCR_CTCIF4_BIT) +#define DMA_IFCR_CGIF4 (1U << DMA_IFCR_CGIF4_BIT) +#define DMA_IFCR_CTEIF3 (1U << DMA_IFCR_CTEIF3_BIT) +#define DMA_IFCR_CHTIF3 (1U << DMA_IFCR_CHTIF3_BIT) +#define DMA_IFCR_CTCIF3 (1U << DMA_IFCR_CTCIF3_BIT) +#define DMA_IFCR_CGIF3 (1U << DMA_IFCR_CGIF3_BIT) +#define DMA_IFCR_CTEIF2 (1U << DMA_IFCR_CTEIF2_BIT) +#define DMA_IFCR_CHTIF2 (1U << DMA_IFCR_CHTIF2_BIT) +#define DMA_IFCR_CTCIF2 (1U << DMA_IFCR_CTCIF2_BIT) +#define DMA_IFCR_CGIF2 (1U << DMA_IFCR_CGIF2_BIT) +#define DMA_IFCR_CTEIF1 (1U << DMA_IFCR_CTEIF1_BIT) +#define DMA_IFCR_CHTIF1 (1U << DMA_IFCR_CHTIF1_BIT) +#define DMA_IFCR_CTCIF1 (1U << DMA_IFCR_CTCIF1_BIT) +#define DMA_IFCR_CGIF1 (1U << DMA_IFCR_CGIF1_BIT) + +/* Channel configuration register */ + +#define DMA_CCR_MEM2MEM_BIT 14 +#define DMA_CCR_MINC_BIT 7 +#define DMA_CCR_PINC_BIT 6 +#define DMA_CCR_CIRC_BIT 5 +#define DMA_CCR_DIR_BIT 4 +#define DMA_CCR_TEIE_BIT 3 +#define DMA_CCR_HTIE_BIT 2 +#define DMA_CCR_TCIE_BIT 1 +#define DMA_CCR_EN_BIT 0 + +#define DMA_CCR_MEM2MEM (1U << DMA_CCR_MEM2MEM_BIT) +#define DMA_CCR_PL (0x3 << 12) +#define DMA_CCR_PL_LOW (0x0 << 12) +#define DMA_CCR_PL_MEDIUM (0x1 << 12) +#define DMA_CCR_PL_HIGH (0x2 << 12) +#define DMA_CCR_PL_VERY_HIGH (0x3 << 12) +#define DMA_CCR_MSIZE (0x3 << 10) +#define DMA_CCR_MSIZE_8BITS (0x0 << 10) +#define DMA_CCR_MSIZE_16BITS (0x1 << 10) +#define DMA_CCR_MSIZE_32BITS (0x2 << 10) +#define DMA_CCR_PSIZE (0x3 << 8) +#define DMA_CCR_PSIZE_8BITS (0x0 << 8) +#define DMA_CCR_PSIZE_16BITS (0x1 << 8) +#define DMA_CCR_PSIZE_32BITS (0x2 << 8) +#define DMA_CCR_MINC (1U << DMA_CCR_MINC_BIT) +#define DMA_CCR_PINC (1U << DMA_CCR_PINC_BIT) +#define DMA_CCR_CIRC (1U << DMA_CCR_CIRC_BIT) +#define DMA_CCR_DIR (1U << DMA_CCR_DIR_BIT) +#define DMA_CCR_DIR_FROM_PER (0U << DMA_CCR_DIR_BIT) +#define DMA_CCR_DIR_FROM_MEM (1U << DMA_CCR_DIR_BIT) +#define DMA_CCR_TEIE (1U << DMA_CCR_TEIE_BIT) +#define DMA_CCR_HTIE (1U << DMA_CCR_HTIE_BIT) +#define DMA_CCR_TCIE (1U << DMA_CCR_TCIE_BIT) +#define DMA_CCR_EN (1U << DMA_CCR_EN_BIT) + +/* + * Devices + */ + +extern dma_dev *DMA1; +#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY) +extern dma_dev *DMA2; +#endif + +/* + * Other types needed by, or useful for, <libmaple/dma.h>. + */ + +/** + * @brief STM32F1 dma_tube. + * On STM32F1, DMA tubes are just channels. + */ +#define dma_tube dma_channel + +/** + * @brief On STM32F1, dma_channel_reg_map is an alias for dma_tube_reg_map. + * This is for backwards compatibility. */ +#define dma_channel_reg_map dma_tube_reg_map + +/** + * @brief STM32F1 configuration flags for dma_tube_config + * @see struct dma_tube_config + */ +typedef enum dma_cfg_flags { + /** + * Source address increment mode + * + * If this flag is set, the source address is incremented (by the + * source size) after each DMA transfer. + */ + DMA_CFG_SRC_INC = 1U << 31, + + /** + * Destination address increment mode + * + * If this flag is set, the destination address is incremented (by + * the destination size) after each DMA transfer. + */ + DMA_CFG_DST_INC = 1U << 30, + + /** + * Circular mode + * + * This mode is not available for memory-to-memory transfers. + */ + DMA_CFG_CIRC = DMA_CCR_CIRC, + + /** Transfer complete interrupt enable */ + DMA_CFG_CMPLT_IE = DMA_CCR_TCIE, + /** Transfer half-complete interrupt enable */ + DMA_CFG_HALF_CMPLT_IE = DMA_CCR_HTIE, + /** Transfer error interrupt enable */ + DMA_CFG_ERR_IE = DMA_CCR_TEIE, +} dma_cfg_flags; + +/** + * @brief STM32F1 DMA request sources. + * + * IMPORTANT: + * + * 1. On STM32F1, each dma_request_src can only be used by a + * particular tube on a particular DMA controller. For example, + * DMA_REQ_SRC_ADC1 belongs to DMA1, tube 1. DMA2 cannot serve + * requests from ADC1, nor can DMA1 tube 2, etc. If you try to use a + * request source with the wrong DMA controller or tube on STM32F1, + * dma_tube_cfg() will fail. + * + * 2. In general, a DMA tube can only serve a single request source at + * a time, and on STM32F1, Terrible Super-Bad Things will happen if + * two request sources are active for a single tube. + * + * To make all this easier to sort out, these dma_request_src + * enumerators are grouped by DMA controller and tube. + * + * @see struct dma_tube_config + * @see dma_tube_cfg() + */ +typedef enum dma_request_src { + /* Each request source encodes the DMA controller and channel it + * belongs to, for error checking in dma_tube_cfg(). */ + + /* DMA1 request sources */ + + /**@{*/ + /** (DMA1, tube 1) */ + DMA_REQ_SRC_ADC1 = (RCC_DMA1 << 3) | 1, + DMA_REQ_SRC_TIM2_CH3 = (RCC_DMA1 << 3) | 1, + DMA_REQ_SRC_TIM4_CH1 = (RCC_DMA1 << 3) | 1, + /**@}*/ + + /**@{*/ + /** (DMA1, tube 2)*/ + DMA_REQ_SRC_SPI1_RX = (RCC_DMA1 << 3) | 2, + DMA_REQ_SRC_USART3_TX = (RCC_DMA1 << 3) | 2, + DMA_REQ_SRC_TIM1_CH1 = (RCC_DMA1 << 3) | 2, + DMA_REQ_SRC_TIM2_UP = (RCC_DMA1 << 3) | 2, + DMA_REQ_SRC_TIM3_CH3 = (RCC_DMA1 << 3) | 2, + /**@}*/ + + /**@{*/ + /** (DMA1, tube 3)*/ + DMA_REQ_SRC_SPI1_TX = (RCC_DMA1 << 3) | 3, + DMA_REQ_SRC_USART3_RX = (RCC_DMA1 << 3) | 3, + DMA_REQ_SRC_TIM1_CH2 = (RCC_DMA1 << 3) | 3, + DMA_REQ_SRC_TIM3_CH4 = (RCC_DMA1 << 3) | 3, + DMA_REQ_SRC_TIM3_UP = (RCC_DMA1 << 3) | 3, + /**@}*/ + + /**@{*/ + /** (DMA1, tube 4)*/ + DMA_REQ_SRC_SPI2_RX = (RCC_DMA1 << 3) | 4, + DMA_REQ_SRC_I2S2_RX = (RCC_DMA1 << 3) | 4, + DMA_REQ_SRC_USART1_TX = (RCC_DMA1 << 3) | 4, + DMA_REQ_SRC_I2C2_TX = (RCC_DMA1 << 3) | 4, + DMA_REQ_SRC_TIM1_CH4 = (RCC_DMA1 << 3) | 4, + DMA_REQ_SRC_TIM1_TRIG = (RCC_DMA1 << 3) | 4, + DMA_REQ_SRC_TIM1_COM = (RCC_DMA1 << 3) | 4, + DMA_REQ_SRC_TIM4_CH2 = (RCC_DMA1 << 3) | 4, + /**@}*/ + + /**@{*/ + /** (DMA1, tube 5)*/ + DMA_REQ_SRC_SPI2_TX = (RCC_DMA1 << 3) | 5, + DMA_REQ_SRC_I2S2_TX = (RCC_DMA1 << 3) | 5, + DMA_REQ_SRC_USART1_RX = (RCC_DMA1 << 3) | 5, + DMA_REQ_SRC_I2C2_RX = (RCC_DMA1 << 3) | 5, + DMA_REQ_SRC_TIM1_UP = (RCC_DMA1 << 3) | 5, + DMA_REQ_SRC_TIM2_CH1 = (RCC_DMA1 << 3) | 5, + DMA_REQ_SRC_TIM4_CH3 = (RCC_DMA1 << 3) | 5, + /**@}*/ + + /**@{*/ + /** (DMA1, tube 6)*/ + DMA_REQ_SRC_USART2_RX = (RCC_DMA1 << 3) | 6, + DMA_REQ_SRC_I2C1_TX = (RCC_DMA1 << 3) | 6, + DMA_REQ_SRC_TIM1_CH3 = (RCC_DMA1 << 3) | 6, + DMA_REQ_SRC_TIM3_CH1 = (RCC_DMA1 << 3) | 6, + DMA_REQ_SRC_TIM3_TRIG = (RCC_DMA1 << 3) | 6, + /**@}*/ + + /**@{*/ + /* Tube 7 */ + DMA_REQ_SRC_USART2_TX = (RCC_DMA1 << 3) | 7, + DMA_REQ_SRC_I2C1_RX = (RCC_DMA1 << 3) | 7, + DMA_REQ_SRC_TIM2_CH2 = (RCC_DMA1 << 3) | 7, + DMA_REQ_SRC_TIM2_CH4 = (RCC_DMA1 << 3) | 7, + DMA_REQ_SRC_TIM4_UP = (RCC_DMA1 << 3) | 7, + /**@}*/ + + /* DMA2 request sources */ + + /**@{*/ + /** (DMA2, tube 1)*/ + DMA_REQ_SRC_SPI3_RX = (RCC_DMA2 << 3) | 1, + DMA_REQ_SRC_I2S3_RX = (RCC_DMA2 << 3) | 1, + DMA_REQ_SRC_TIM5_CH4 = (RCC_DMA2 << 3) | 1, + DMA_REQ_SRC_TIM5_TRIG = (RCC_DMA2 << 3) | 1, + /**@}*/ + + /**@{*/ + /** (DMA2, tube 2)*/ + DMA_REQ_SRC_SPI3_TX = (RCC_DMA2 << 3) | 2, + DMA_REQ_SRC_I2S3_TX = (RCC_DMA2 << 3) | 2, + DMA_REQ_SRC_TIM5_CH3 = (RCC_DMA2 << 3) | 2, + DMA_REQ_SRC_TIM5_UP = (RCC_DMA2 << 3) | 2, + /**@}*/ + + /**@{*/ + /** (DMA2, tube 3)*/ + DMA_REQ_SRC_UART4_RX = (RCC_DMA2 << 3) | 3, + DMA_REQ_SRC_TIM6_UP = (RCC_DMA2 << 3) | 3, + DMA_REQ_SRC_DAC_CH1 = (RCC_DMA2 << 3) | 3, + /**@}*/ + + /**@{*/ + /** (DMA2, tube 4)*/ + DMA_REQ_SRC_SDIO = (RCC_DMA2 << 3) | 4, + DMA_REQ_SRC_TIM5_CH2 = (RCC_DMA2 << 3) | 4, + /**@}*/ + + /**@{*/ + /** (DMA2, tube 5)*/ + DMA_REQ_SRC_ADC3 = (RCC_DMA2 << 3) | 5, + DMA_REQ_SRC_UART4_TX = (RCC_DMA2 << 3) | 5, + DMA_REQ_SRC_TIM5_CH1 = (RCC_DMA2 << 3) | 5, + /**@}*/ +} dma_request_src; + +/* + * Convenience routines. + */ + +/** + * @brief On STM32F1, dma_is_channel_enabled() is an alias for + * dma_is_enabled(). + * This is for backwards compatibility. + */ +#define dma_is_channel_enabled dma_is_enabled + +#define DMA_CHANNEL_NREGS 5 /* accounts for reserved word */ +static inline dma_tube_reg_map* dma_tube_regs(dma_dev *dev, dma_tube tube) { + __io uint32 *ccr1 = &dev->regs->CCR1; + return (dma_channel_reg_map*)(ccr1 + DMA_CHANNEL_NREGS * (tube - 1)); +} + +/** + * @brief On STM32F1, dma_channel_regs() is an alias for dma_tube_regs(). + * This is for backwards compatibility. */ +#define dma_channel_regs(dev, ch) dma_tube_regs(dev, ch) + +static inline uint8 dma_is_enabled(dma_dev *dev, dma_tube tube) { + return (uint8)(dma_tube_regs(dev, tube)->CCR & DMA_CCR_EN); +} + +static inline uint8 dma_get_isr_bits(dma_dev *dev, dma_tube tube) { + uint8 shift = (tube - 1) * 4; + return (dev->regs->ISR >> shift) & 0xF; +} + +static inline void dma_clear_isr_bits(dma_dev *dev, dma_tube tube) { + dev->regs->IFCR = (1U << (4 * (tube - 1))); +} + +/** + * @brief Deprecated + * STM32F1 mode flags for dma_setup_xfer(). Use dma_tube_cfg() instead. + * @see dma_tube_cfg() + */ +typedef enum dma_mode_flags { + DMA_MEM_2_MEM = 1 << 14, /**< Memory to memory mode */ + DMA_MINC_MODE = 1 << 7, /**< Auto-increment memory address */ + DMA_PINC_MODE = 1 << 6, /**< Auto-increment peripheral address */ + DMA_CIRC_MODE = 1 << 5, /**< Circular mode */ + DMA_FROM_MEM = 1 << 4, /**< Read from memory to peripheral */ + DMA_TRNS_ERR = 1 << 3, /**< Interrupt on transfer error */ + DMA_HALF_TRNS = 1 << 2, /**< Interrupt on half-transfer */ + DMA_TRNS_CMPLT = 1 << 1 /**< Interrupt on transfer completion */ +} dma_mode_flags; + +/* Keep this around for backwards compatibility, but it's deprecated. + * New code should use dma_tube_cfg() instead. + * + * (It's not possible to fully configure a DMA stream on F2 with just + * this information, so this interface is too tied to the F1.) */ +__deprecated +void dma_setup_transfer(dma_dev *dev, + dma_channel channel, + __io void *peripheral_address, + dma_xfer_size peripheral_size, + __io void *memory_address, + dma_xfer_size memory_size, + uint32 mode); + +#ifdef __cplusplus +} // extern "C" +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/exti.h b/libmaple/stm32f1/include/series/exti.h new file mode 100644 index 0000000..1ece664 --- /dev/null +++ b/libmaple/stm32f1/include/series/exti.h @@ -0,0 +1,46 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/exti.h + * @brief STM32F1 external interrupts + */ + +#ifndef _LIBMAPLE_STM32F1_EXTI_H_ +#define _LIBMAPLE_STM32F1_EXTI_H_ + +#ifdef __cpluspus +extern "C" { +#endif + +struct exti_reg_map; +#define EXTI_BASE ((struct exti_reg_map*)0x40010400) + +#ifdef __cpluspus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/flash.h b/libmaple/stm32f1/include/series/flash.h new file mode 100644 index 0000000..24efb0b --- /dev/null +++ b/libmaple/stm32f1/include/series/flash.h @@ -0,0 +1,149 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/flash.h + * @brief STM32F1 Flash header. + * + * Provides register map, base pointer, and register bit definitions + * for the Flash controller on the STM32F1 line, along with + * series-specific configuration values. + */ + +#ifndef _LIBMAPLE_STM32F1_FLASH_H_ +#define _LIBMAPLE_STM32F1_FLASH_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/libmaple_types.h> + +/* + * Register map + */ + +/** @brief STM32F1 Flash register map type */ +typedef struct flash_reg_map { + __io uint32 ACR; /**< Access control register */ + __io uint32 KEYR; /**< Key register */ + __io uint32 OPTKEYR; /**< OPTKEY register */ + __io uint32 SR; /**< Status register */ + __io uint32 CR; /**< Control register */ + __io uint32 AR; /**< Address register */ + __io uint32 OBR; /**< Option byte register */ + __io uint32 WRPR; /**< Write protection register */ +} flash_reg_map; + +#define FLASH_BASE ((struct flash_reg_map*)0x40022000) + +/* + * Register bit definitions + */ + +/* Access control register */ + +#define FLASH_ACR_PRFTBS_BIT 5 +#define FLASH_ACR_PRFTBE_BIT 4 +#define FLASH_ACR_HLFCYA_BIT 3 + +#define FLASH_ACR_PRFTBS (1U << FLASH_ACR_PRFTBS_BIT) +#define FLASH_ACR_PRFTBE (1U << FLASH_ACR_PRFTBE_BIT) +#define FLASH_ACR_HLFCYA (1U << FLASH_ACR_HLFCYA_BIT) +#define FLASH_ACR_LATENCY 0x7 + +/* Status register */ + +#define FLASH_SR_EOP_BIT 5 +#define FLASH_SR_WRPRTERR_BIT 4 +#define FLASH_SR_PGERR_BIT 2 +#define FLASH_SR_BSY_BIT 0 + +#define FLASH_SR_EOP (1U << FLASH_SR_EOP_BIT) +#define FLASH_SR_WRPRTERR (1U << FLASH_SR_WRPRTERR_BIT) +#define FLASH_SR_PGERR (1U << FLASH_SR_PGERR_BIT) +#define FLASH_SR_BSY (1U << FLASH_SR_BSY_BIT) + +/* Control register */ + +#define FLASH_CR_EOPIE_BIT 12 +#define FLASH_CR_ERRIE_BIT 10 +#define FLASH_CR_OPTWRE_BIT 9 +#define FLASH_CR_LOCK_BIT 7 +#define FLASH_CR_STRT_BIT 6 +#define FLASH_CR_OPTER_BIT 5 +#define FLASH_CR_OPTPG_BIT 4 +#define FLASH_CR_MER_BIT 2 +#define FLASH_CR_PER_BIT 1 +#define FLASH_CR_PG_BIT 0 + +#define FLASH_CR_EOPIE (1U << FLASH_CR_EOPIE_BIT) +#define FLASH_CR_ERRIE (1U << FLASH_CR_ERRIE_BIT) +#define FLASH_CR_OPTWRE (1U << FLASH_CR_OPTWRE_BIT) +#define FLASH_CR_LOCK (1U << FLASH_CR_LOCK_BIT) +#define FLASH_CR_STRT (1U << FLASH_CR_STRT_BIT) +#define FLASH_CR_OPTER (1U << FLASH_CR_OPTER_BIT) +#define FLASH_CR_OPTPG (1U << FLASH_CR_OPTPG_BIT) +#define FLASH_CR_MER (1U << FLASH_CR_MER_BIT) +#define FLASH_CR_PER (1U << FLASH_CR_PER_BIT) +#define FLASH_CR_PG (1U << FLASH_CR_PG_BIT) + +/* Option byte register */ + +#define FLASH_OBR_nRST_STDBY_BIT 4 +#define FLASH_OBR_nRST_STOP_BIT 3 +#define FLASH_OBR_WDG_SW_BIT 2 +#define FLASH_OBR_RDPRT_BIT 1 +#define FLASH_OBR_OPTERR_BIT 0 + +#define FLASH_OBR_DATA1 (0xFF << 18) +#define FLASH_OBR_DATA0 (0xFF << 10) +#define FLASH_OBR_USER 0x3FF +#define FLASH_OBR_nRST_STDBY (1U << FLASH_OBR_nRST_STDBY_BIT) +#define FLASH_OBR_nRST_STOP (1U << FLASH_OBR_nRST_STOP_BIT) +#define FLASH_OBR_WDG_SW (1U << FLASH_OBR_WDG_SW_BIT) +#define FLASH_OBR_RDPRT (1U << FLASH_OBR_RDPRT_BIT) +#define FLASH_OBR_OPTERR (1U << FLASH_OBR_OPTERR_BIT) + +/* + * Series-specific configuration values. + */ + +#define FLASH_SAFE_WAIT_STATES FLASH_WAIT_STATE_2 + +/* Flash memory features available via ACR */ +enum { + FLASH_PREFETCH = 0x10, + FLASH_HALF_CYCLE = 0x8, + FLASH_ICACHE = 0x0, /* Not available on STM32F1 */ + FLASH_DCACHE = 0x0, /* Not available on STM32F1 */ +}; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/gpio.h b/libmaple/stm32f1/include/series/gpio.h new file mode 100644 index 0000000..aecf911 --- /dev/null +++ b/libmaple/stm32f1/include/series/gpio.h @@ -0,0 +1,493 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * Copyright (c) 2011, 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. +*****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/gpio.h + * @brief STM32F1 GPIO and AFIO support. + * General purpose I/O (GPIO) and Alternate Function I/O (AFIO). + */ + +#ifndef _LIBMAPLE_STM32F1_GPIO_H_ +#define _LIBMAPLE_STM32F1_GPIO_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/stm32.h> +#include <libmaple/libmaple_types.h> +#include <libmaple/exti.h> + +/* + * GPIO register maps and devices + */ + +/** GPIO register map type */ +typedef struct gpio_reg_map { + __io uint32 CRL; /**< Port configuration register low */ + __io uint32 CRH; /**< Port configuration register high */ + __io uint32 IDR; /**< Port input data register */ + __io uint32 ODR; /**< Port output data register */ + __io uint32 BSRR; /**< Port bit set/reset register */ + __io uint32 BRR; /**< Port bit reset register */ + __io uint32 LCKR; /**< Port configuration lock register */ +} gpio_reg_map; + +struct gpio_dev; +extern struct gpio_dev gpioa; +extern struct gpio_dev* const GPIOA; +extern struct gpio_dev gpiob; +extern struct gpio_dev* const GPIOB; +extern struct gpio_dev gpioc; +extern struct gpio_dev* const GPIOC; +extern struct gpio_dev gpiod; +extern struct gpio_dev* const GPIOD; +#ifdef STM32_HIGH_DENSITY +extern struct gpio_dev gpioe; +extern struct gpio_dev* const GPIOE; +extern struct gpio_dev gpiof; +extern struct gpio_dev* const GPIOF; +extern struct gpio_dev gpiog; +extern struct gpio_dev* const GPIOG; +#endif + +/** GPIO port A register map base pointer */ +#define GPIOA_BASE ((struct gpio_reg_map*)0x40010800) +/** GPIO port B register map base pointer */ +#define GPIOB_BASE ((struct gpio_reg_map*)0x40010C00) +/** GPIO port C register map base pointer */ +#define GPIOC_BASE ((struct gpio_reg_map*)0x40011000) +/** GPIO port D register map base pointer */ +#define GPIOD_BASE ((struct gpio_reg_map*)0x40011400) +/** GPIO port E register map base pointer */ +#define GPIOE_BASE ((struct gpio_reg_map*)0x40011800) +/** GPIO port F register map base pointer */ +#define GPIOF_BASE ((struct gpio_reg_map*)0x40011C00) +/** GPIO port G register map base pointer */ +#define GPIOG_BASE ((struct gpio_reg_map*)0x40012000) + +/* + * GPIO register bit definitions + */ + +/* Control registers, low and high */ + +#define GPIO_CR_CNF (0x3 << 2) +#define GPIO_CR_CNF_INPUT_ANALOG (0x0 << 2) +#define GPIO_CR_CNF_INPUT_FLOATING (0x1 << 2) +#define GPIO_CR_CNF_INPUT_PU_PD (0x2 << 2) +#define GPIO_CR_CNF_OUTPUT_PP (0x0 << 2) +#define GPIO_CR_CNF_OUTPUT_OD (0x1 << 2) +#define GPIO_CR_CNF_AF_OUTPUT_PP (0x2 << 2) +#define GPIO_CR_CNF_AF_OUTPUT_OD (0x3 << 2) +#define GPIO_CR_MODE 0x3 +#define GPIO_CR_MODE_INPUT 0x0 +#define GPIO_CR_MODE_OUTPUT_10MHZ 0x1 +#define GPIO_CR_MODE_OUTPUT_2MHZ 0x2 +#define GPIO_CR_MODE_OUTPUT_50MHZ 0x3 + +/** + * @brief GPIO pin modes. + * + * These only allow for 50MHZ max output speeds; if you want slower, + * use direct register access. + */ +typedef enum gpio_pin_mode { + /** Output push-pull. */ + GPIO_OUTPUT_PP = GPIO_CR_CNF_OUTPUT_PP | GPIO_CR_MODE_OUTPUT_50MHZ, + /** Output open-drain. */ + GPIO_OUTPUT_OD = GPIO_CR_CNF_OUTPUT_OD | GPIO_CR_MODE_OUTPUT_50MHZ, + /** Alternate function output push-pull. */ + GPIO_AF_OUTPUT_PP = GPIO_CR_CNF_AF_OUTPUT_PP | GPIO_CR_MODE_OUTPUT_50MHZ, + /** Alternate function output open drain. */ + GPIO_AF_OUTPUT_OD = GPIO_CR_CNF_AF_OUTPUT_OD | GPIO_CR_MODE_OUTPUT_50MHZ, + /** Analog input. */ + GPIO_INPUT_ANALOG = GPIO_CR_CNF_INPUT_ANALOG | GPIO_CR_MODE_INPUT, + /** Input floating. */ + GPIO_INPUT_FLOATING = GPIO_CR_CNF_INPUT_FLOATING | GPIO_CR_MODE_INPUT, + /** Input pull-down. */ + GPIO_INPUT_PD = GPIO_CR_CNF_INPUT_PU_PD | GPIO_CR_MODE_INPUT, + /** Input pull-up. */ + GPIO_INPUT_PU, /* (treated a special case, for ODR twiddling) */ +} gpio_pin_mode; + +/* Hacks for F2: */ +#define GPIO_MODE_ANALOG GPIO_INPUT_ANALOG +#define GPIO_MODE_OUTPUT GPIO_OUTPUT_PP + +/* + * AFIO register map + */ + +/** AFIO register map */ +typedef struct afio_reg_map { + __io uint32 EVCR; /**< Event control register. */ + __io uint32 MAPR; /**< AF remap and debug I/O configuration register. */ + __io uint32 EXTICR1; /**< External interrupt configuration register 1. */ + __io uint32 EXTICR2; /**< External interrupt configuration register 2. */ + __io uint32 EXTICR3; /**< External interrupt configuration register 3. */ + __io uint32 EXTICR4; /**< External interrupt configuration register 4. */ + __io uint32 MAPR2; /**< + * AF remap and debug I/O configuration register 2. */ +} afio_reg_map; + +/** AFIO register map base pointer. */ +#define AFIO_BASE ((struct afio_reg_map *)0x40010000) + +/* + * AFIO register bit definitions + */ + +/* Event control register */ + +#define AFIO_EVCR_EVOE (0x1 << 7) +#define AFIO_EVCR_PORT_PA (0x0 << 4) +#define AFIO_EVCR_PORT_PB (0x1 << 4) +#define AFIO_EVCR_PORT_PC (0x2 << 4) +#define AFIO_EVCR_PORT_PD (0x3 << 4) +#define AFIO_EVCR_PORT_PE (0x4 << 4) +#define AFIO_EVCR_PIN_0 0x0 +#define AFIO_EVCR_PIN_1 0x1 +#define AFIO_EVCR_PIN_2 0x2 +#define AFIO_EVCR_PIN_3 0x3 +#define AFIO_EVCR_PIN_4 0x4 +#define AFIO_EVCR_PIN_5 0x5 +#define AFIO_EVCR_PIN_6 0x6 +#define AFIO_EVCR_PIN_7 0x7 +#define AFIO_EVCR_PIN_8 0x8 +#define AFIO_EVCR_PIN_9 0x9 +#define AFIO_EVCR_PIN_10 0xA +#define AFIO_EVCR_PIN_11 0xB +#define AFIO_EVCR_PIN_12 0xC +#define AFIO_EVCR_PIN_13 0xD +#define AFIO_EVCR_PIN_14 0xE +#define AFIO_EVCR_PIN_15 0xF + +/* AF remap and debug I/O configuration register */ + +#define AFIO_MAPR_SWJ_CFG (0x7 << 24) +#define AFIO_MAPR_SWJ_CFG_FULL_SWJ (0x0 << 24) +#define AFIO_MAPR_SWJ_CFG_FULL_SWJ_NO_NJRST (0x1 << 24) +#define AFIO_MAPR_SWJ_CFG_NO_JTAG_SW (0x2 << 24) +#define AFIO_MAPR_SWJ_CFG_NO_JTAG_NO_SW (0x4 << 24) +#define AFIO_MAPR_ADC2_ETRGREG_REMAP (1U << 20) +#define AFIO_MAPR_ADC2_ETRGINJ_REMAP (1U << 19) +#define AFIO_MAPR_ADC1_ETRGREG_REMAP (1U << 18) +#define AFIO_MAPR_ADC1_ETRGINJ_REMAP (1U << 17) +#define AFIO_MAPR_TIM5CH4_IREMAP (1U << 16) +#define AFIO_MAPR_PD01_REMAP (1U << 15) +#define AFIO_MAPR_CAN_REMAP (0x3 << 13) +#define AFIO_MAPR_CAN_REMAP_NONE (0x0 << 13) +#define AFIO_MAPR_CAN_REMAP_PB8_PB9 (0x2 << 13) +#define AFIO_MAPR_CAN_REMAP_PD0_PD1 (0x3 << 13) +#define AFIO_MAPR_TIM4_REMAP (1U << 12) +#define AFIO_MAPR_TIM3_REMAP (0x3 << 10) +#define AFIO_MAPR_TIM3_REMAP_NONE (0x0 << 10) +#define AFIO_MAPR_TIM3_REMAP_PARTIAL (0x2 << 10) +#define AFIO_MAPR_TIM3_REMAP_FULL (0x3 << 10) +#define AFIO_MAPR_TIM2_REMAP (0x3 << 8) +#define AFIO_MAPR_TIM2_REMAP_NONE (0x0 << 8) +#define AFIO_MAPR_TIM2_REMAP_PA15_PB3_PA2_PA3 (0x1 << 8) +#define AFIO_MAPR_TIM2_REMAP_PA0_PA1_PB10_PB11 (0x2 << 8) +#define AFIO_MAPR_TIM2_REMAP_FULL (0x3 << 8) +#define AFIO_MAPR_TIM1_REMAP (0x3 << 6) +#define AFIO_MAPR_TIM1_REMAP_NONE (0x0 << 6) +#define AFIO_MAPR_TIM1_REMAP_PARTIAL (0x1 << 6) +#define AFIO_MAPR_TIM1_REMAP_FULL (0x3 << 6) +#define AFIO_MAPR_USART3_REMAP (0x3 << 4) +#define AFIO_MAPR_USART3_REMAP_NONE (0x0 << 4) +#define AFIO_MAPR_USART3_REMAP_PARTIAL (0x1 << 4) +#define AFIO_MAPR_USART3_REMAP_FULL (0x3 << 4) +#define AFIO_MAPR_USART2_REMAP (1U << 3) +#define AFIO_MAPR_USART1_REMAP (1U << 2) +#define AFIO_MAPR_I2C1_REMAP (1U << 1) +#define AFIO_MAPR_SPI1_REMAP (1U << 0) + +/* External interrupt configuration register 1 */ + +#define AFIO_EXTICR1_EXTI3 (0xF << 12) +#define AFIO_EXTICR1_EXTI3_PA (0x0 << 12) +#define AFIO_EXTICR1_EXTI3_PB (0x1 << 12) +#define AFIO_EXTICR1_EXTI3_PC (0x2 << 12) +#define AFIO_EXTICR1_EXTI3_PD (0x3 << 12) +#define AFIO_EXTICR1_EXTI3_PE (0x4 << 12) +#define AFIO_EXTICR1_EXTI3_PF (0x5 << 12) +#define AFIO_EXTICR1_EXTI3_PG (0x6 << 12) +#define AFIO_EXTICR1_EXTI2 (0xF << 8) +#define AFIO_EXTICR1_EXTI2_PA (0x0 << 8) +#define AFIO_EXTICR1_EXTI2_PB (0x1 << 8) +#define AFIO_EXTICR1_EXTI2_PC (0x2 << 8) +#define AFIO_EXTICR1_EXTI2_PD (0x3 << 8) +#define AFIO_EXTICR1_EXTI2_PE (0x4 << 8) +#define AFIO_EXTICR1_EXTI2_PF (0x5 << 8) +#define AFIO_EXTICR1_EXTI2_PG (0x6 << 8) +#define AFIO_EXTICR1_EXTI1 (0xF << 4) +#define AFIO_EXTICR1_EXTI1_PA (0x0 << 4) +#define AFIO_EXTICR1_EXTI1_PB (0x1 << 4) +#define AFIO_EXTICR1_EXTI1_PC (0x2 << 4) +#define AFIO_EXTICR1_EXTI1_PD (0x3 << 4) +#define AFIO_EXTICR1_EXTI1_PE (0x4 << 4) +#define AFIO_EXTICR1_EXTI1_PF (0x5 << 4) +#define AFIO_EXTICR1_EXTI1_PG (0x6 << 4) +#define AFIO_EXTICR1_EXTI0 0xF +#define AFIO_EXTICR1_EXTI0_PA 0x0 +#define AFIO_EXTICR1_EXTI0_PB 0x1 +#define AFIO_EXTICR1_EXTI0_PC 0x2 +#define AFIO_EXTICR1_EXTI0_PD 0x3 +#define AFIO_EXTICR1_EXTI0_PE 0x4 +#define AFIO_EXTICR1_EXTI0_PF 0x5 +#define AFIO_EXTICR1_EXTI0_PG 0x6 + +/* External interrupt configuration register 2 */ + +#define AFIO_EXTICR2_EXTI7 (0xF << 12) +#define AFIO_EXTICR2_EXTI7_PA (0x0 << 12) +#define AFIO_EXTICR2_EXTI7_PB (0x1 << 12) +#define AFIO_EXTICR2_EXTI7_PC (0x2 << 12) +#define AFIO_EXTICR2_EXTI7_PD (0x3 << 12) +#define AFIO_EXTICR2_EXTI7_PE (0x4 << 12) +#define AFIO_EXTICR2_EXTI7_PF (0x5 << 12) +#define AFIO_EXTICR2_EXTI7_PG (0x6 << 12) +#define AFIO_EXTICR2_EXTI6 (0xF << 8) +#define AFIO_EXTICR2_EXTI6_PA (0x0 << 8) +#define AFIO_EXTICR2_EXTI6_PB (0x1 << 8) +#define AFIO_EXTICR2_EXTI6_PC (0x2 << 8) +#define AFIO_EXTICR2_EXTI6_PD (0x3 << 8) +#define AFIO_EXTICR2_EXTI6_PE (0x4 << 8) +#define AFIO_EXTICR2_EXTI6_PF (0x5 << 8) +#define AFIO_EXTICR2_EXTI6_PG (0x6 << 8) +#define AFIO_EXTICR2_EXTI5 (0xF << 4) +#define AFIO_EXTICR2_EXTI5_PA (0x0 << 4) +#define AFIO_EXTICR2_EXTI5_PB (0x1 << 4) +#define AFIO_EXTICR2_EXTI5_PC (0x2 << 4) +#define AFIO_EXTICR2_EXTI5_PD (0x3 << 4) +#define AFIO_EXTICR2_EXTI5_PE (0x4 << 4) +#define AFIO_EXTICR2_EXTI5_PF (0x5 << 4) +#define AFIO_EXTICR2_EXTI5_PG (0x6 << 4) +#define AFIO_EXTICR2_EXTI4 0xF +#define AFIO_EXTICR2_EXTI4_PA 0x0 +#define AFIO_EXTICR2_EXTI4_PB 0x1 +#define AFIO_EXTICR2_EXTI4_PC 0x2 +#define AFIO_EXTICR2_EXTI4_PD 0x3 +#define AFIO_EXTICR2_EXTI4_PE 0x4 +#define AFIO_EXTICR2_EXTI4_PF 0x5 +#define AFIO_EXTICR2_EXTI4_PG 0x6 + +/* AF remap and debug I/O configuration register 2 */ + +#define AFIO_MAPR2_FSMC_NADV (1U << 10) +#define AFIO_MAPR2_TIM14_REMAP (1U << 9) +#define AFIO_MAPR2_TIM13_REMAP (1U << 8) +#define AFIO_MAPR2_TIM11_REMAP (1U << 7) +#define AFIO_MAPR2_TIM10_REMAP (1U << 6) +#define AFIO_MAPR2_TIM9_REMAP (1U << 5) + +/* + * AFIO convenience routines + */ + +void afio_init(void); + +/* HACK: Use upper bit to denote MAPR2, Bit 31 is reserved and + * not used in either MAPR or MAPR2 */ +#define AFIO_REMAP_USE_MAPR2 (1U << 31) + +/** + * @brief Available peripheral remaps. + * @see afio_remap() + */ +typedef enum afio_remap_peripheral { + /** ADC 2 external trigger regular conversion remapping */ + AFIO_REMAP_ADC2_ETRGREG = AFIO_MAPR_ADC2_ETRGREG_REMAP, + /** ADC 2 external trigger injected conversion remapping */ + AFIO_REMAP_ADC2_ETRGINJ = AFIO_MAPR_ADC2_ETRGINJ_REMAP, + /** ADC 1 external trigger regular conversion remapping */ + AFIO_REMAP_ADC1_ETRGREG = AFIO_MAPR_ADC1_ETRGREG_REMAP, + /** ADC 1 external trigger injected conversion remapping */ + AFIO_REMAP_ADC1_ETRGINJ = AFIO_MAPR_ADC1_ETRGINJ_REMAP, + /** Timer 5 channel 4 internal remapping */ + AFIO_REMAP_TIM5CH4_I = AFIO_MAPR_TIM5CH4_IREMAP, + /** Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ + AFIO_REMAP_PD01 = AFIO_MAPR_PD01_REMAP, + /** CAN alternate function remapping 1 (RX on PB8, TX on PB9) */ + AFIO_REMAP_CAN_1 = AFIO_MAPR_CAN_REMAP_PB8_PB9, + /** CAN alternate function remapping 2 (RX on PD0, TX on PD1) */ + AFIO_REMAP_CAN_2 = AFIO_MAPR_CAN_REMAP_PD0_PD1, + /** Timer 4 remapping */ + AFIO_REMAP_TIM4 = AFIO_MAPR_TIM4_REMAP, + /** Timer 3 partial remapping */ + AFIO_REMAP_TIM3_PARTIAL = AFIO_MAPR_TIM3_REMAP_PARTIAL, + /** Timer 3 full remapping */ + AFIO_REMAP_TIM3_FULL = AFIO_MAPR_TIM3_REMAP_FULL, + /** + * Timer 2 partial remapping 1 (CH1 and ETR on PA15, CH2 on PB3, + * CH3 on PA2, CH4 on PA3) */ + AFIO_REMAP_TIM2_PARTIAL_1 = AFIO_MAPR_TIM2_REMAP_PA15_PB3_PA2_PA3, + /** + * Timer 2 partial remapping 2 (CH1 and ETR on PA0, CH2 on PA1, + * CH3 on PB10, CH4 on PB11) */ + AFIO_REMAP_TIM2_PARTIAL_2 = AFIO_MAPR_TIM2_REMAP_PA0_PA1_PB10_PB11, + /** Timer 2 full remapping */ + AFIO_REMAP_TIM2_FULL = AFIO_MAPR_TIM2_REMAP_FULL, + /** USART 2 remapping */ + AFIO_REMAP_USART2 = AFIO_MAPR_USART2_REMAP, + /** USART 1 remapping */ + AFIO_REMAP_USART1 = AFIO_MAPR_USART1_REMAP, + /** I2C 1 remapping */ + AFIO_REMAP_I2C1 = AFIO_MAPR_I2C1_REMAP, + /** SPI 1 remapping */ + AFIO_REMAP_SPI1 = AFIO_MAPR_SPI1_REMAP, + /** NADV signal not connected */ + AFIO_REMAP_FSMC_NADV = AFIO_MAPR2_FSMC_NADV | AFIO_REMAP_USE_MAPR2, + /** Timer 14 remapping */ + AFIO_REMAP_TIM14 = AFIO_MAPR2_TIM14_REMAP | AFIO_REMAP_USE_MAPR2, + /** Timer 13 remapping */ + AFIO_REMAP_TIM13 = AFIO_MAPR2_TIM13_REMAP | AFIO_REMAP_USE_MAPR2, + /** Timer 11 remapping */ + AFIO_REMAP_TIM11 = AFIO_MAPR2_TIM11_REMAP | AFIO_REMAP_USE_MAPR2, + /** Timer 10 remapping */ + AFIO_REMAP_TIM10 = AFIO_MAPR2_TIM10_REMAP | AFIO_REMAP_USE_MAPR2, + /** Timer 9 remapping */ + AFIO_REMAP_TIM9 = AFIO_MAPR2_TIM9_REMAP | AFIO_REMAP_USE_MAPR2, +} afio_remap_peripheral; + +void afio_remap(afio_remap_peripheral p); + +/** + * @brief Debug port configuration + * + * Used to configure the behavior of JTAG and Serial Wire (SW) debug + * ports and their associated GPIO pins. + * + * @see afio_cfg_debug_ports() + */ +typedef enum afio_debug_cfg { + /** Full Serial Wire and JTAG debug */ + AFIO_DEBUG_FULL_SWJ = AFIO_MAPR_SWJ_CFG_FULL_SWJ, + /** Full Serial Wire and JTAG, but no NJTRST. */ + AFIO_DEBUG_FULL_SWJ_NO_NJRST = AFIO_MAPR_SWJ_CFG_FULL_SWJ_NO_NJRST, + /** Serial Wire debug only (JTAG-DP disabled, SW-DP enabled) */ + AFIO_DEBUG_SW_ONLY = AFIO_MAPR_SWJ_CFG_NO_JTAG_SW, + /** No debug; all JTAG and SW pins are free for use as GPIOs. */ + AFIO_DEBUG_NONE = AFIO_MAPR_SWJ_CFG_NO_JTAG_NO_SW, +} afio_debug_cfg; + +/** + * @brief Enable or disable the JTAG and SW debug ports. + * @param config Desired debug port configuration + * @see afio_debug_cfg + */ +static inline void afio_cfg_debug_ports(afio_debug_cfg config) { + __io uint32 *mapr = &AFIO_BASE->MAPR; + *mapr = (*mapr & ~AFIO_MAPR_SWJ_CFG) | config; +} + +/* + * Deprecated bits + */ + +/** + * @brief Deprecated. Use exti_cfg instead. + * + * In previous versions of libmaple, exti_attach_interrupt() took an + * afio_exti_port argument; afio_exti_port was also a member of struct + * gpio_dev. This isn't portable, so we now use exti_cfg + * instead. This typedef (and the macros AFIO_EXTI_PA, ..., + * AFIO_EXTI_PG) exist to preserve backwards compatibility. + */ +typedef exti_cfg afio_exti_port; + +/** Deprecated. Use EXTI_PA instead. */ +#define AFIO_EXTI_PA EXTI_PA +/** Deprecated. Use EXTI_PB instead. */ +#define AFIO_EXTI_PB EXTI_PB +/** Deprecated. Use EXTI_PC instead. */ +#define AFIO_EXTI_PC EXTI_PC +/** Deprecated. Use EXTI_PD instead. */ +#define AFIO_EXTI_PD EXTI_PD +/** Deprecated. Use EXTI_PE instead. */ +#define AFIO_EXTI_PE EXTI_PE +/** Deprecated. Use EXTI_PF instead. */ +#define AFIO_EXTI_PF EXTI_PF +/** Deprecated. Use EXTI_PG instead. */ +#define AFIO_EXTI_PG EXTI_PG + +/** + * @brief Deprecated. Use exti_num instead. + * + * In previous versions of libmaple, exti_attach_interrupt() took an + * afio_exti_num argument. This isn't portable, so we use exti_num + * instead. This typedef (and the macros AFIO_EXTI_0, ..., + * AFIO_EXTI_15) exist to preserve backwards compatibility. + */ +typedef exti_num afio_exti_num; + +/** Deprecated. Use EXTI0 instead. */ +#define AFIO_EXTI_0 EXTI0 +/** Deprecated. Use EXTI1 instead. */ +#define AFIO_EXTI_1 EXTI1 +/** Deprecated. Use EXTI2 instead. */ +#define AFIO_EXTI_2 EXTI2 +/** Deprecated. Use EXTI3 instead. */ +#define AFIO_EXTI_3 EXTI3 +/** Deprecated. Use EXTI4 instead. */ +#define AFIO_EXTI_4 EXTI4 +/** Deprecated. Use EXTI5 instead. */ +#define AFIO_EXTI_5 EXTI5 +/** Deprecated. Use EXTI6 instead. */ +#define AFIO_EXTI_6 EXTI6 +/** Deprecated. Use EXTI7 instead. */ +#define AFIO_EXTI_7 EXTI7 +/** Deprecated. Use EXTI8 instead. */ +#define AFIO_EXTI_8 EXTI8 +/** Deprecated. Use EXTI9 instead. */ +#define AFIO_EXTI_9 EXTI9 +/** Deprecated. Use EXTI10 instead. */ +#define AFIO_EXTI_10 EXTI10 +/** Deprecated. Use EXTI11 instead. */ +#define AFIO_EXTI_11 EXTI11 +/** Deprecated. Use EXTI12 instead. */ +#define AFIO_EXTI_12 EXTI12 +/** Deprecated. Use EXTI13 instead. */ +#define AFIO_EXTI_13 EXTI13 +/** Deprecated. Use EXTI14 instead. */ +#define AFIO_EXTI_14 EXTI14 +/** Deprecated. Use EXTI15 instead. */ +#define AFIO_EXTI_15 EXTI15 + +/** + * @brief Deprecated. Use exti_select(exti, port) instead. + */ +static __always_inline void afio_exti_select(exti_num exti, exti_cfg port) { + exti_select(exti, port); +} + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/i2c.h b/libmaple/stm32f1/include/series/i2c.h new file mode 100644 index 0000000..a0822e8 --- /dev/null +++ b/libmaple/stm32f1/include/series/i2c.h @@ -0,0 +1,85 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung (from <libmaple/i2c.h>). + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/include/stm32f1/include/series/i2c.h + * @brief STM32F1 I2C + */ + +#ifndef _LIBMAPLE_STM32F1_I2C_H_ +#define _LIBMAPLE_STM32F1_I2C_H_ + +#include <libmaple/i2c_common.h> +#include <libmaple/gpio.h> +#include <libmaple/stm32.h> + +/* + * Register maps + */ + +struct i2c_reg_map; + +/** STM32F1 I2C1 register map base pointer */ +#define I2C1_BASE ((struct i2c_reg_map*)0x40005400) +/** STM32F1 I2C2 register map base pointer */ +#define I2C2_BASE ((struct i2c_reg_map*)0x40005800) + +/* + * Devices + */ + +extern i2c_dev* const I2C1; +extern i2c_dev* const I2C2; + +/* + * For internal use + */ + +static inline uint32 _i2c_bus_clk(i2c_dev *dev) { + /* Both I2C peripherals are on APB1 */ + return STM32_PCLK1 / (1000 * 1000); +} + +#define _I2C_HAVE_IRQ_FIXUP 1 +void _i2c_irq_priority_fixup(i2c_dev *dev); + +/* + * Deprecated functionality + */ + +/* Flag to use alternate pin mapping in i2c_master_enable(). */ +#define _I2C_HAVE_DEPRECATED_I2C_REMAP 1 +#define I2C_REMAP 0x4 +static inline void _i2c_handle_remap(i2c_dev *dev, uint32 flags) { + if ((dev == I2C1) && (flags & I2C_REMAP)) { + afio_remap(AFIO_REMAP_I2C1); + I2C1->sda_pin = 9; + I2C1->scl_pin = 8; + } +} + +#endif /* _LIBMAPLE_STM32F1_I2C_H_ */ diff --git a/libmaple/stm32f1/include/series/nvic.h b/libmaple/stm32f1/include/series/nvic.h new file mode 100644 index 0000000..cdac737 --- /dev/null +++ b/libmaple/stm32f1/include/series/nvic.h @@ -0,0 +1,173 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/nvic.h + * @brief STM32F1 Nested Vectored Interrupt Controller (NVIC) support. + */ + +#ifndef _LIBMAPLE_STM32F1_NVIC_H_ +#define _LIBMAPLE_STM32F1_NVIC_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/libmaple_types.h> +#include <libmaple/stm32.h> + +/** + * @brief STM32F1 interrupt vector table interrupt numbers. + * @see <libmaple/scb.h> + */ +typedef enum nvic_irq_num { + NVIC_NMI = -14, /**< Non-maskable interrupt */ + NVIC_HARDFAULT = -13, /**< Hard fault (all class of fault) */ + NVIC_MEM_MANAGE = -12, /**< Memory management */ + NVIC_BUS_FAULT = -11, /**< Bus fault: prefetch fault, memory + access fault. */ + NVIC_USAGE_FAULT = -10, /**< Usage fault: Undefined instruction or + illegal state. */ + NVIC_SVC = -5, /**< System service call via SWI insruction */ + NVIC_DEBUG_MON = -4, /**< Debug monitor */ + NVIC_PEND_SVC = -2, /**< Pendable request for system service */ + NVIC_SYSTICK = -1, /**< System tick timer */ + NVIC_WWDG = 0, /**< Window watchdog interrupt */ + NVIC_PVD = 1, /**< PVD through EXTI line detection */ + NVIC_TAMPER = 2, /**< Tamper */ + NVIC_RTC = 3, /**< Real-time clock */ + NVIC_FLASH = 4, /**< Flash */ + NVIC_RCC = 5, /**< Reset and clock control */ + NVIC_EXTI0 = 6, /**< EXTI line 0 */ + NVIC_EXTI1 = 7, /**< EXTI line 1 */ + NVIC_EXTI2 = 8, /**< EXTI line 2 */ + NVIC_EXTI3 = 9, /**< EXTI line 3 */ + NVIC_EXTI4 = 10, /**< EXTI line 4 */ + NVIC_DMA_CH1 = 11, /**< DMA1 channel 1 */ + NVIC_DMA_CH2 = 12, /**< DMA1 channel 2 */ + NVIC_DMA_CH3 = 13, /**< DMA1 channel 3 */ + NVIC_DMA_CH4 = 14, /**< DMA1 channel 4 */ + NVIC_DMA_CH5 = 15, /**< DMA1 channel 5 */ + NVIC_DMA_CH6 = 16, /**< DMA1 channel 6 */ + NVIC_DMA_CH7 = 17, /**< DMA1 channel 7 */ + NVIC_ADC_1_2 = 18, /**< ADC1 and ADC2 */ + NVIC_USB_HP_CAN_TX = 19, /**< USB high priority or CAN TX */ + NVIC_USB_LP_CAN_RX0 = 20, /**< USB low priority or CAN RX0 */ + NVIC_CAN_RX1 = 21, /**< CAN RX1 */ + NVIC_CAN_SCE = 22, /**< CAN SCE */ + NVIC_EXTI_9_5 = 23, /**< EXTI line [9:5] */ + NVIC_TIMER1_BRK_TIMER9 = 24, /**< Timer 1 break, Timer 9. */ + NVIC_TIMER1_UP_TIMER10 = 25, /**< Timer 1 update, Timer 10. */ + NVIC_TIMER1_TRG_COM_TIMER11 = 26, /**< + * Timer 1 trigger and commutation, + * Timer 11. */ + NVIC_TIMER1_CC = 27, /**< Timer 1 capture/compare */ + NVIC_TIMER2 = 28, /**< Timer 2 */ + NVIC_TIMER3 = 29, /**< Timer 3 */ + NVIC_TIMER4 = 30, /**< Timer 4 */ + NVIC_I2C1_EV = 31, /**< I2C1 event */ + NVIC_I2C1_ER = 32, /**< I2C1 error */ + NVIC_I2C2_EV = 33, /**< I2C2 event */ + NVIC_I2C2_ER = 34, /**< I2C2 error */ + NVIC_SPI1 = 35, /**< SPI1 */ + NVIC_SPI2 = 36, /**< SPI2 */ + NVIC_USART1 = 37, /**< USART1 */ + NVIC_USART2 = 38, /**< USART2 */ + NVIC_USART3 = 39, /**< USART3 */ + NVIC_EXTI_15_10 = 40, /**< EXTI line [15:10] */ + NVIC_RTCALARM = 41, /**< RTC alarm through EXTI line */ + NVIC_USBWAKEUP = 42, /**< USB wakeup from suspend through + EXTI line */ + NVIC_TIMER8_BRK_TIMER12 = 43, /**< Timer 8 break, timer 12 */ + NVIC_TIMER8_UP_TIMER13 = 44, /**< Timer 8 update, timer 13 */ + NVIC_TIMER8_TRG_COM_TIMER14 = 45, /**< + * Timer 8 trigger and commutation, + * Timer 14. */ + NVIC_TIMER8_CC = 46, /**< Timer 8 capture/compare */ + NVIC_ADC3 = 47, /**< ADC3 */ + NVIC_FSMC = 48, /**< FSMC */ + NVIC_SDIO = 49, /**< SDIO */ + NVIC_TIMER5 = 50, /**< Timer 5 */ + NVIC_SPI3 = 51, /**< SPI3 */ + NVIC_UART4 = 52, /**< UART4 */ + NVIC_UART5 = 53, /**< UART5 */ + NVIC_TIMER6 = 54, /**< Timer 6 */ + NVIC_TIMER7 = 55, /**< Timer 7 */ + NVIC_DMA2_CH1 = 56, /**< DMA2 channel 1 */ + NVIC_DMA2_CH2 = 57, /**< DMA2 channel 2 */ + NVIC_DMA2_CH3 = 58, /**< DMA2 channel 3 */ + NVIC_DMA2_CH_4_5 = 59, /**< DMA2 channels 4 and 5 */ + + /* Old enumerators kept around for backwards compatibility: */ + NVIC_TIMER1_BRK = + NVIC_TIMER1_BRK_TIMER9, /**< @brief (Deprecated) Timer 1 break + * + * For backwards compatibility only. + * Use NVIC_TIMER1_BRK_TIMER9 instead. */ + NVIC_TIMER1_UP = + NVIC_TIMER1_UP_TIMER10, /**< @brief (Deprecated) Timer 1 update. + * + * For backwards compatibility only. + * Use NVIC_TIMER1_UP_TIMER10 instead. */ + NVIC_TIMER1_TRG_COM = + NVIC_TIMER1_TRG_COM_TIMER11, /**< @brief (deprecated) Timer 1 trigger + * and commutation. + * + * For backwards compatibility only. + * Use NVIC_TIMER1_TRG_COM_TIMER11 + * instead. */ + NVIC_TIMER8_BRK = + NVIC_TIMER8_BRK_TIMER12, /**< @brief (deprecated) Timer 8 break + * + * For backwards compatibility only. + * Use NVIC_TIMER8_BRK_TIMER12 instead. */ + NVIC_TIMER8_UP = + NVIC_TIMER8_UP_TIMER13, /**< @brief (deprecated) Timer 8 update + * For backwards compatibility only. + * Use NVIC_TIMER8_UP_TIMER13 instead. */ + NVIC_TIMER8_TRG_COM = + NVIC_TIMER8_TRG_COM_TIMER14, /**< @brief (deprecated) Timer 8 trigger + * and commutation. + * For backwards compatibility only. + * Use NVIC_TIMER8_TRG_COM_TIMER14 + * instead. */ +} nvic_irq_num; + +static inline void nvic_irq_disable_all(void) { + /* Even low-density devices have over 32 interrupt lines. */ + NVIC_BASE->ICER[0] = 0xFFFFFFFF; + NVIC_BASE->ICER[1] = 0xFFFFFFFF; +#if STM32_NR_INTERRUPTS > 64 + /* Only some have over 64; e.g. connectivity line MCUs. */ + NVIC_BASE->ICER[2] = 0xFFFFFFFF; +#endif +} + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/pwr.h b/libmaple/stm32f1/include/series/pwr.h new file mode 100644 index 0000000..e143a8c --- /dev/null +++ b/libmaple/stm32f1/include/series/pwr.h @@ -0,0 +1,52 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/pwr.h + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief STM32F1 Power control (PWR) support. + */ + +#ifndef _LIBMAPLE_STM32F1_PWR_H_ +#define _LIBMAPLE_STM32F1_PWR_H_ + +/* + * Register bit definitions + */ + +/* Control register */ + +/* PVD level selection */ +#define PWR_CR_PLS_2_2V (0x0 << 5) +#define PWR_CR_PLS_2_3V (0x1 << 5) +#define PWR_CR_PLS_2_4V (0x2 << 5) +#define PWR_CR_PLS_2_5V (0x3 << 5) +#define PWR_CR_PLS_2_6V (0x4 << 5) +#define PWR_CR_PLS_2_7V (0x5 << 5) +#define PWR_CR_PLS_2_8V (0x6 << 5) +#define PWR_CR_PLS_2_9V (0x7 << 5) + +#endif diff --git a/libmaple/stm32f1/include/series/rcc.h b/libmaple/stm32f1/include/series/rcc.h new file mode 100644 index 0000000..225ca49 --- /dev/null +++ b/libmaple/stm32f1/include/series/rcc.h @@ -0,0 +1,599 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/rcc.h + * @brief STM32F1 reset and clock control (RCC) support. + */ + +#ifndef _LIBMAPLE_STM32F1_RCC_H_ +#define _LIBMAPLE_STM32F1_RCC_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include <libmaple/libmaple_types.h> + +/* + * Register map + */ + +/** STM32F1 RCC register map type */ +typedef struct rcc_reg_map { + __io uint32 CR; /**< Clock control register */ + __io uint32 CFGR; /**< Clock configuration register */ + __io uint32 CIR; /**< Clock interrupt register */ + __io uint32 APB2RSTR; /**< APB2 peripheral reset register */ + __io uint32 APB1RSTR; /**< APB1 peripheral reset register */ + __io uint32 AHBENR; /**< AHB peripheral clock enable register */ + __io uint32 APB2ENR; /**< APB2 peripheral clock enable register */ + __io uint32 APB1ENR; /**< APB1 peripheral clock enable register */ + __io uint32 BDCR; /**< Backup domain control register */ + __io uint32 CSR; /**< Control/status register */ +} rcc_reg_map; + +#define RCC_BASE ((struct rcc_reg_map*)0x40021000) + +/* + * Register bit definitions + */ + +/* Clock control register */ + +#define RCC_CR_PLLRDY_BIT 25 +#define RCC_CR_PLLON_BIT 24 +#define RCC_CR_CSSON_BIT 19 +#define RCC_CR_HSEBYP_BIT 18 +#define RCC_CR_HSERDY_BIT 17 +#define RCC_CR_HSEON_BIT 16 +#define RCC_CR_HSIRDY_BIT 1 +#define RCC_CR_HSION_BIT 0 + +#define RCC_CR_PLLRDY (1U << RCC_CR_PLLRDY_BIT) +#define RCC_CR_PLLON (1U << RCC_CR_PLLON_BIT) +#define RCC_CR_CSSON (1U << RCC_CR_CSSON_BIT) +#define RCC_CR_HSEBYP (1U << RCC_CR_HSEBYP_BIT) +#define RCC_CR_HSERDY (1U << RCC_CR_HSERDY_BIT) +#define RCC_CR_HSEON (1U << RCC_CR_HSEON_BIT) +#define RCC_CR_HSICAL (0xFF << 8) +#define RCC_CR_HSITRIM (0x1F << 3) +#define RCC_CR_HSIRDY (1U << RCC_CR_HSIRDY_BIT) +#define RCC_CR_HSION (1U << RCC_CR_HSION_BIT) + +/* Clock configuration register */ + +#define RCC_CFGR_USBPRE_BIT 22 +#define RCC_CFGR_PLLXTPRE_BIT 17 +#define RCC_CFGR_PLLSRC_BIT 16 + +#define RCC_CFGR_MCO (0x3 << 24) +#define RCC_CFGR_USBPRE (1U << RCC_CFGR_USBPRE_BIT) +#define RCC_CFGR_PLLMUL (0xF << 18) +#define RCC_CFGR_PLLXTPRE (1U << RCC_CFGR_PLLXTPRE_BIT) +#define RCC_CFGR_PLLSRC (1U << RCC_CFGR_PLLSRC_BIT) +#define RCC_CFGR_ADCPRE (0x3 << 14) +#define RCC_CFGR_PPRE2 (0x7 << 11) +#define RCC_CFGR_PPRE1 (0x7 << 8) +#define RCC_CFGR_HPRE (0xF << 4) +#define RCC_CFGR_SWS (0x3 << 2) +#define RCC_CFGR_SWS_PLL (0x2 << 2) +#define RCC_CFGR_SWS_HSE (0x1 << 2) +#define RCC_CFGR_SW 0x3 +#define RCC_CFGR_SW_PLL 0x2 +#define RCC_CFGR_SW_HSE 0x1 + +/* Clock interrupt register */ + +#define RCC_CIR_CSSC_BIT 23 +#define RCC_CIR_PLLRDYC_BIT 20 +#define RCC_CIR_HSERDYC_BIT 19 +#define RCC_CIR_HSIRDYC_BIT 18 +#define RCC_CIR_LSERDYC_BIT 17 +#define RCC_CIR_LSIRDYC_BIT 16 +#define RCC_CIR_PLLRDYIE_BIT 12 +#define RCC_CIR_HSERDYIE_BIT 11 +#define RCC_CIR_HSIRDYIE_BIT 10 +#define RCC_CIR_LSERDYIE_BIT 9 +#define RCC_CIR_LSIRDYIE_BIT 8 +#define RCC_CIR_CSSF_BIT 7 +#define RCC_CIR_PLLRDYF_BIT 4 +#define RCC_CIR_HSERDYF_BIT 3 +#define RCC_CIR_HSIRDYF_BIT 2 +#define RCC_CIR_LSERDYF_BIT 1 +#define RCC_CIR_LSIRDYF_BIT 0 + +#define RCC_CIR_CSSC (1U << RCC_CIR_CSSC_BIT) +#define RCC_CIR_PLLRDYC (1U << RCC_CIR_PLLRDYC_BIT) +#define RCC_CIR_HSERDYC (1U << RCC_CIR_HSERDYC_BIT) +#define RCC_CIR_HSIRDYC (1U << RCC_CIR_HSIRDYC_BIT) +#define RCC_CIR_LSERDYC (1U << RCC_CIR_LSERDYC_BIT) +#define RCC_CIR_LSIRDYC (1U << RCC_CIR_LSIRDYC_BIT) +#define RCC_CIR_PLLRDYIE (1U << RCC_CIR_PLLRDYIE_BIT) +#define RCC_CIR_HSERDYIE (1U << RCC_CIR_HSERDYIE_BIT) +#define RCC_CIR_HSIRDYIE (1U << RCC_CIR_HSIRDYIE_BIT) +#define RCC_CIR_LSERDYIE (1U << RCC_CIR_LSERDYIE_BIT) +#define RCC_CIR_LSIRDYIE (1U << RCC_CIR_LSIRDYIE_BIT) +#define RCC_CIR_CSSF (1U << RCC_CIR_CSSF_BIT) +#define RCC_CIR_PLLRDYF (1U << RCC_CIR_PLLRDYF_BIT) +#define RCC_CIR_HSERDYF (1U << RCC_CIR_HSERDYF_BIT) +#define RCC_CIR_HSIRDYF (1U << RCC_CIR_HSIRDYF_BIT) +#define RCC_CIR_LSERDYF (1U << RCC_CIR_LSERDYF_BIT) +#define RCC_CIR_LSIRDYF (1U << RCC_CIR_LSIRDYF_BIT) + +/* APB2 peripheral reset register */ + +#define RCC_APB2RSTR_TIM11RST_BIT 21 +#define RCC_APB2RSTR_TIM10RST_BIT 20 +#define RCC_APB2RSTR_TIM9RST_BIT 19 +#define RCC_APB2RSTR_ADC3RST_BIT 15 +#define RCC_APB2RSTR_USART1RST_BIT 14 +#define RCC_APB2RSTR_TIM8RST_BIT 13 +#define RCC_APB2RSTR_SPI1RST_BIT 12 +#define RCC_APB2RSTR_TIM1RST_BIT 11 +#define RCC_APB2RSTR_ADC2RST_BIT 10 +#define RCC_APB2RSTR_ADC1RST_BIT 9 +#define RCC_APB2RSTR_IOPGRST_BIT 8 +#define RCC_APB2RSTR_IOPFRST_BIT 7 +#define RCC_APB2RSTR_IOPERST_BIT 6 +#define RCC_APB2RSTR_IOPDRST_BIT 5 +#define RCC_APB2RSTR_IOPCRST_BIT 4 +#define RCC_APB2RSTR_IOPBRST_BIT 3 +#define RCC_APB2RSTR_IOPARST_BIT 2 +#define RCC_APB2RSTR_AFIORST_BIT 0 + +#define RCC_APB2RSTR_TIM11RST (1U << RCC_APB2RSTR_TIM11RST_BIT) +#define RCC_APB2RSTR_TIM10RST (1U << RCC_APB2RSTR_TIM10RST_BIT) +#define RCC_APB2RSTR_TIM9RST (1U << RCC_APB2RSTR_TIM9RST_BIT) +#define RCC_APB2RSTR_ADC3RST (1U << RCC_APB2RSTR_ADC3RST_BIT) +#define RCC_APB2RSTR_USART1RST (1U << RCC_APB2RSTR_USART1RST_BIT) +#define RCC_APB2RSTR_TIM8RST (1U << RCC_APB2RSTR_TIM8RST_BIT) +#define RCC_APB2RSTR_SPI1RST (1U << RCC_APB2RSTR_SPI1RST_BIT) +#define RCC_APB2RSTR_TIM1RST (1U << RCC_APB2RSTR_TIM1RST_BIT) +#define RCC_APB2RSTR_ADC2RST (1U << RCC_APB2RSTR_ADC2RST_BIT) +#define RCC_APB2RSTR_ADC1RST (1U << RCC_APB2RSTR_ADC1RST_BIT) +#define RCC_APB2RSTR_IOPGRST (1U << RCC_APB2RSTR_IOPGRST_BIT) +#define RCC_APB2RSTR_IOPFRST (1U << RCC_APB2RSTR_IOPFRST_BIT) +#define RCC_APB2RSTR_IOPERST (1U << RCC_APB2RSTR_IOPERST_BIT) +#define RCC_APB2RSTR_IOPDRST (1U << RCC_APB2RSTR_IOPDRST_BIT) +#define RCC_APB2RSTR_IOPCRST (1U << RCC_APB2RSTR_IOPCRST_BIT) +#define RCC_APB2RSTR_IOPBRST (1U << RCC_APB2RSTR_IOPBRST_BIT) +#define RCC_APB2RSTR_IOPARST (1U << RCC_APB2RSTR_IOPARST_BIT) +#define RCC_APB2RSTR_AFIORST (1U << RCC_APB2RSTR_AFIORST_BIT) + +/* APB1 peripheral reset register */ + +#define RCC_APB1RSTR_DACRST_BIT 29 +#define RCC_APB1RSTR_PWRRST_BIT 28 +#define RCC_APB1RSTR_BKPRST_BIT 27 +#define RCC_APB1RSTR_CANRST_BIT 25 +#define RCC_APB1RSTR_USBRST_BIT 23 +#define RCC_APB1RSTR_I2C2RST_BIT 22 +#define RCC_APB1RSTR_I2C1RST_BIT 21 +#define RCC_APB1RSTR_UART5RST_BIT 20 +#define RCC_APB1RSTR_UART4RST_BIT 19 +#define RCC_APB1RSTR_USART3RST_BIT 18 +#define RCC_APB1RSTR_USART2RST_BIT 17 +#define RCC_APB1RSTR_SPI3RST_BIT 15 +#define RCC_APB1RSTR_SPI2RST_BIT 14 +#define RCC_APB1RSTR_WWDRST_BIT 11 +#define RCC_APB1RSTR_TIM14RST_BIT 8 +#define RCC_APB1RSTR_TIM13RST_BIT 7 +#define RCC_APB1RSTR_TIM12RST_BIT 6 +#define RCC_APB1RSTR_TIM7RST_BIT 5 +#define RCC_APB1RSTR_TIM6RST_BIT 4 +#define RCC_APB1RSTR_TIM5RST_BIT 3 +#define RCC_APB1RSTR_TIM4RST_BIT 2 +#define RCC_APB1RSTR_TIM3RST_BIT 1 +#define RCC_APB1RSTR_TIM2RST_BIT 0 + +#define RCC_APB1RSTR_DACRST (1U << RCC_APB1RSTR_DACRST_BIT) +#define RCC_APB1RSTR_PWRRST (1U << RCC_APB1RSTR_PWRRST_BIT) +#define RCC_APB1RSTR_BKPRST (1U << RCC_APB1RSTR_BKPRST_BIT) +#define RCC_APB1RSTR_CANRST (1U << RCC_APB1RSTR_CANRST_BIT) +#define RCC_APB1RSTR_USBRST (1U << RCC_APB1RSTR_USBRST_BIT) +#define RCC_APB1RSTR_I2C2RST (1U << RCC_APB1RSTR_I2C2RST_BIT) +#define RCC_APB1RSTR_I2C1RST (1U << RCC_APB1RSTR_I2C1RST_BIT) +#define RCC_APB1RSTR_UART5RST (1U << RCC_APB1RSTR_UART5RST_BIT) +#define RCC_APB1RSTR_UART4RST (1U << RCC_APB1RSTR_UART4RST_BIT) +#define RCC_APB1RSTR_USART3RST (1U << RCC_APB1RSTR_USART3RST_BIT) +#define RCC_APB1RSTR_USART2RST (1U << RCC_APB1RSTR_USART2RST_BIT) +#define RCC_APB1RSTR_SPI3RST (1U << RCC_APB1RSTR_SPI3RST_BIT) +#define RCC_APB1RSTR_SPI2RST (1U << RCC_APB1RSTR_SPI2RST_BIT) +#define RCC_APB1RSTR_WWDRST (1U << RCC_APB1RSTR_WWDRST_BIT) +#define RCC_APB1RSTR_TIM14RST (1U << RCC_APB1RSTR_TIM14RST_BIT) +#define RCC_APB1RSTR_TIM13RST (1U << RCC_APB1RSTR_TIM13RST_BIT) +#define RCC_APB1RSTR_TIM12RST (1U << RCC_APB1RSTR_TIM12RST_BIT) +#define RCC_APB1RSTR_TIM7RST (1U << RCC_APB1RSTR_TIM7RST_BIT) +#define RCC_APB1RSTR_TIM6RST (1U << RCC_APB1RSTR_TIM6RST_BIT) +#define RCC_APB1RSTR_TIM5RST (1U << RCC_APB1RSTR_TIM5RST_BIT) +#define RCC_APB1RSTR_TIM4RST (1U << RCC_APB1RSTR_TIM4RST_BIT) +#define RCC_APB1RSTR_TIM3RST (1U << RCC_APB1RSTR_TIM3RST_BIT) +#define RCC_APB1RSTR_TIM2RST (1U << RCC_APB1RSTR_TIM2RST_BIT) + +/* AHB peripheral clock enable register */ + +#define RCC_AHBENR_SDIOEN_BIT 10 +#define RCC_AHBENR_FSMCEN_BIT 8 +#define RCC_AHBENR_CRCEN_BIT 7 +#define RCC_AHBENR_FLITFEN_BIT 4 +#define RCC_AHBENR_SRAMEN_BIT 2 +#define RCC_AHBENR_DMA2EN_BIT 1 +#define RCC_AHBENR_DMA1EN_BIT 0 + +#define RCC_AHBENR_SDIOEN (1U << RCC_AHBENR_SDIOEN_BIT) +#define RCC_AHBENR_FSMCEN (1U << RCC_AHBENR_FSMCEN_BIT) +#define RCC_AHBENR_CRCEN (1U << RCC_AHBENR_CRCEN_BIT) +#define RCC_AHBENR_FLITFEN (1U << RCC_AHBENR_FLITFEN_BIT) +#define RCC_AHBENR_SRAMEN (1U << RCC_AHBENR_SRAMEN_BIT) +#define RCC_AHBENR_DMA2EN (1U << RCC_AHBENR_DMA2EN_BIT) +#define RCC_AHBENR_DMA1EN (1U << RCC_AHBENR_DMA1EN_BIT) + +/* APB2 peripheral clock enable register */ + +#define RCC_APB2ENR_TIM11EN_BIT 21 +#define RCC_APB2ENR_TIM10EN_BIT 20 +#define RCC_APB2ENR_TIM9EN_BIT 19 +#define RCC_APB2ENR_ADC3EN_BIT 15 +#define RCC_APB2ENR_USART1EN_BIT 14 +#define RCC_APB2ENR_TIM8EN_BIT 13 +#define RCC_APB2ENR_SPI1EN_BIT 12 +#define RCC_APB2ENR_TIM1EN_BIT 11 +#define RCC_APB2ENR_ADC2EN_BIT 10 +#define RCC_APB2ENR_ADC1EN_BIT 9 +#define RCC_APB2ENR_IOPGEN_BIT 8 +#define RCC_APB2ENR_IOPFEN_BIT 7 +#define RCC_APB2ENR_IOPEEN_BIT 6 +#define RCC_APB2ENR_IOPDEN_BIT 5 +#define RCC_APB2ENR_IOPCEN_BIT 4 +#define RCC_APB2ENR_IOPBEN_BIT 3 +#define RCC_APB2ENR_IOPAEN_BIT 2 +#define RCC_APB2ENR_AFIOEN_BIT 0 + +#define RCC_APB2ENR_TIM11EN (1U << RCC_APB2ENR_TIM11EN_BIT) +#define RCC_APB2ENR_TIM10EN (1U << RCC_APB2ENR_TIM10EN_BIT) +#define RCC_APB2ENR_TIM9EN (1U << RCC_APB2ENR_TIM9EN_BIT) +#define RCC_APB2ENR_ADC3EN (1U << RCC_APB2ENR_ADC3EN_BIT) +#define RCC_APB2ENR_USART1EN (1U << RCC_APB2ENR_USART1EN_BIT) +#define RCC_APB2ENR_TIM8EN (1U << RCC_APB2ENR_TIM8EN_BIT) +#define RCC_APB2ENR_SPI1EN (1U << RCC_APB2ENR_SPI1EN_BIT) +#define RCC_APB2ENR_TIM1EN (1U << RCC_APB2ENR_TIM1EN_BIT) +#define RCC_APB2ENR_ADC2EN (1U << RCC_APB2ENR_ADC2EN_BIT) +#define RCC_APB2ENR_ADC1EN (1U << RCC_APB2ENR_ADC1EN_BIT) +#define RCC_APB2ENR_IOPGEN (1U << RCC_APB2ENR_IOPGEN_BIT) +#define RCC_APB2ENR_IOPFEN (1U << RCC_APB2ENR_IOPFEN_BIT) +#define RCC_APB2ENR_IOPEEN (1U << RCC_APB2ENR_IOPEEN_BIT) +#define RCC_APB2ENR_IOPDEN (1U << RCC_APB2ENR_IOPDEN_BIT) +#define RCC_APB2ENR_IOPCEN (1U << RCC_APB2ENR_IOPCEN_BIT) +#define RCC_APB2ENR_IOPBEN (1U << RCC_APB2ENR_IOPBEN_BIT) +#define RCC_APB2ENR_IOPAEN (1U << RCC_APB2ENR_IOPAEN_BIT) +#define RCC_APB2ENR_AFIOEN (1U << RCC_APB2ENR_AFIOEN_BIT) + +/* APB1 peripheral clock enable register */ + +#define RCC_APB1ENR_DACEN_BIT 29 +#define RCC_APB1ENR_PWREN_BIT 28 +#define RCC_APB1ENR_BKPEN_BIT 27 +#define RCC_APB1ENR_CANEN_BIT 25 +#define RCC_APB1ENR_USBEN_BIT 23 +#define RCC_APB1ENR_I2C2EN_BIT 22 +#define RCC_APB1ENR_I2C1EN_BIT 21 +#define RCC_APB1ENR_UART5EN_BIT 20 +#define RCC_APB1ENR_UART4EN_BIT 19 +#define RCC_APB1ENR_USART3EN_BIT 18 +#define RCC_APB1ENR_USART2EN_BIT 17 +#define RCC_APB1ENR_SPI3EN_BIT 15 +#define RCC_APB1ENR_SPI2EN_BIT 14 +#define RCC_APB1ENR_WWDEN_BIT 11 +#define RCC_APB1ENR_TIM14EN_BIT 8 +#define RCC_APB1ENR_TIM13EN_BIT 7 +#define RCC_APB1ENR_TIM12EN_BIT 6 +#define RCC_APB1ENR_TIM7EN_BIT 5 +#define RCC_APB1ENR_TIM6EN_BIT 4 +#define RCC_APB1ENR_TIM5EN_BIT 3 +#define RCC_APB1ENR_TIM4EN_BIT 2 +#define RCC_APB1ENR_TIM3EN_BIT 1 +#define RCC_APB1ENR_TIM2EN_BIT 0 + +#define RCC_APB1ENR_DACEN (1U << RCC_APB1ENR_DACEN_BIT) +#define RCC_APB1ENR_PWREN (1U << RCC_APB1ENR_PWREN_BIT) +#define RCC_APB1ENR_BKPEN (1U << RCC_APB1ENR_BKPEN_BIT) +#define RCC_APB1ENR_CANEN (1U << RCC_APB1ENR_CANEN_BIT) +#define RCC_APB1ENR_USBEN (1U << RCC_APB1ENR_USBEN_BIT) +#define RCC_APB1ENR_I2C2EN (1U << RCC_APB1ENR_I2C2EN_BIT) +#define RCC_APB1ENR_I2C1EN (1U << RCC_APB1ENR_I2C1EN_BIT) +#define RCC_APB1ENR_UART5EN (1U << RCC_APB1ENR_UART5EN_BIT) +#define RCC_APB1ENR_UART4EN (1U << RCC_APB1ENR_UART4EN_BIT) +#define RCC_APB1ENR_USART3EN (1U << RCC_APB1ENR_USART3EN_BIT) +#define RCC_APB1ENR_USART2EN (1U << RCC_APB1ENR_USART2EN_BIT) +#define RCC_APB1ENR_SPI3EN (1U << RCC_APB1ENR_SPI3EN_BIT) +#define RCC_APB1ENR_SPI2EN (1U << RCC_APB1ENR_SPI2EN_BIT) +#define RCC_APB1ENR_WWDEN (1U << RCC_APB1ENR_WWDEN_BIT) +#define RCC_APB1ENR_TIM14EN (1U << RCC_APB1ENR_TIM14EN_BIT) +#define RCC_APB1ENR_TIM13EN (1U << RCC_APB1ENR_TIM13EN_BIT) +#define RCC_APB1ENR_TIM12EN (1U << RCC_APB1ENR_TIM12EN_BIT) +#define RCC_APB1ENR_TIM7EN (1U << RCC_APB1ENR_TIM7EN_BIT) +#define RCC_APB1ENR_TIM6EN (1U << RCC_APB1ENR_TIM6EN_BIT) +#define RCC_APB1ENR_TIM5EN (1U << RCC_APB1ENR_TIM5EN_BIT) +#define RCC_APB1ENR_TIM4EN (1U << RCC_APB1ENR_TIM4EN_BIT) +#define RCC_APB1ENR_TIM3EN (1U << RCC_APB1ENR_TIM3EN_BIT) +#define RCC_APB1ENR_TIM2EN (1U << RCC_APB1ENR_TIM2EN_BIT) + +/* Backup domain control register */ + +#define RCC_BDCR_BDRST_BIT 16 +#define RCC_BDCR_RTCEN_BIT 15 +#define RCC_BDCR_LSEBYP_BIT 2 +#define RCC_BDCR_LSERDY_BIT 1 +#define RCC_BDCR_LSEON_BIT 0 + +#define RCC_BDCR_BDRST (1U << RCC_BDCR_BDRST_BIT) +#define RCC_BDCR_RTCEN (1U << RCC_BDCR_RTC_BIT) +#define RCC_BDCR_RTCSEL (0x3 << 8) +#define RCC_BDCR_RTCSEL_NONE (0x0 << 8) +#define RCC_BDCR_RTCSEL_LSE (0x1 << 8) +#define RCC_BDCR_RTCSEL_HSE (0x3 << 8) +#define RCC_BDCR_LSEBYP (1U << RCC_BDCR_LSEBYP_BIT) +#define RCC_BDCR_LSERDY (1U << RCC_BDCR_LSERDY_BIT) +#define RCC_BDCR_LSEON (1U << RCC_BDCR_LSEON_BIT) + +/* Control/status register */ + +#define RCC_CSR_LPWRRSTF_BIT 31 +#define RCC_CSR_WWDGRSTF_BIT 30 +#define RCC_CSR_IWDGRSTF_BIT 29 +#define RCC_CSR_SFTRSTF_BIT 28 +#define RCC_CSR_PORRSTF_BIT 27 +#define RCC_CSR_PINRSTF_BIT 26 +#define RCC_CSR_RMVF_BIT 24 +#define RCC_CSR_LSIRDY_BIT 1 +#define RCC_CSR_LSION_BIT 0 + +#define RCC_CSR_LPWRRSTF (1U << RCC_CSR_LPWRRSTF_BIT) +#define RCC_CSR_WWDGRSTF (1U << RCC_CSR_WWDGRSTF_BIT) +#define RCC_CSR_IWDGRSTF (1U << RCC_CSR_IWDGRSTF_BIT) +#define RCC_CSR_SFTRSTF (1U << RCC_CSR_SFTRSTF_BIT) +#define RCC_CSR_PORRSTF (1U << RCC_CSR_PORRSTF_BIT) +#define RCC_CSR_PINRSTF (1U << RCC_CSR_PINRSTF_BIT) +#define RCC_CSR_RMVF (1U << RCC_CSR_RMVF_BIT) +#define RCC_CSR_LSIRDY (1U << RCC_CSR_LSIRDY_BIT) +#define RCC_CSR_LSION (1U << RCC_CSR_LSION_BIT) + +/* + * libmaple-mandated enumeration types. + */ + +/** + * @brief STM32F1 rcc_clk_id. + */ +typedef enum rcc_clk_id { + RCC_ADC1, + RCC_ADC2, + RCC_ADC3, + RCC_AFIO, + RCC_BKP, + RCC_CRC, + RCC_DAC, + RCC_DMA1, + RCC_DMA2, + RCC_FLITF, + RCC_FSMC, + RCC_GPIOA, + RCC_GPIOB, + RCC_GPIOC, + RCC_GPIOD, + RCC_GPIOE, + RCC_GPIOF, + RCC_GPIOG, + RCC_I2C1, + RCC_I2C2, + RCC_PWR, + RCC_SDIO, + RCC_SPI1, + RCC_SPI2, + RCC_SPI3, + RCC_SRAM, + RCC_TIMER1, + RCC_TIMER2, + RCC_TIMER3, + RCC_TIMER4, + RCC_TIMER5, + RCC_TIMER6, + RCC_TIMER7, + RCC_TIMER8, + RCC_TIMER9, + RCC_TIMER10, + RCC_TIMER11, + RCC_TIMER12, + RCC_TIMER13, + RCC_TIMER14, + RCC_USART1, + RCC_USART2, + RCC_USART3, + RCC_UART4, + RCC_UART5, + RCC_USB, +} rcc_clk_id; + +/** + * @brief STM32F1 PLL clock sources. + * @see rcc_configure_pll() + */ +typedef enum rcc_pllsrc { + RCC_PLLSRC_HSE = (0x1 << 16), + RCC_PLLSRC_HSI_DIV_2 = (0x0 << 16) +} rcc_pllsrc; + +/** + * @brief STM32F1 clock domains. + * @see rcc_dev_clk() + */ +typedef enum rcc_clk_domain { + RCC_APB1, + RCC_APB2, + RCC_AHB +} rcc_clk_domain; + +/** + * @brief STM32F1 Prescaler identifiers + * @see rcc_set_prescaler() + */ +typedef enum rcc_prescaler { + RCC_PRESCALER_AHB, + RCC_PRESCALER_APB1, + RCC_PRESCALER_APB2, + RCC_PRESCALER_USB, + RCC_PRESCALER_ADC +} rcc_prescaler; + +/** + * @brief STM32F1 ADC prescaler dividers + * @see rcc_set_prescaler() + */ +typedef enum rcc_adc_divider { + RCC_ADCPRE_PCLK_DIV_2 = 0x0 << 14, + RCC_ADCPRE_PCLK_DIV_4 = 0x1 << 14, + RCC_ADCPRE_PCLK_DIV_6 = 0x2 << 14, + RCC_ADCPRE_PCLK_DIV_8 = 0x3 << 14, +} rcc_adc_divider; + +/** + * @brief STM32F1 APB1 prescaler dividers + * @see rcc_set_prescaler() + */ +typedef enum rcc_apb1_divider { + RCC_APB1_HCLK_DIV_1 = 0x0 << 8, + RCC_APB1_HCLK_DIV_2 = 0x4 << 8, + RCC_APB1_HCLK_DIV_4 = 0x5 << 8, + RCC_APB1_HCLK_DIV_8 = 0x6 << 8, + RCC_APB1_HCLK_DIV_16 = 0x7 << 8, +} rcc_apb1_divider; + +/** + * @brief STM32F1 APB2 prescaler dividers + * @see rcc_set_prescaler() + */ +typedef enum rcc_apb2_divider { + RCC_APB2_HCLK_DIV_1 = 0x0 << 11, + RCC_APB2_HCLK_DIV_2 = 0x4 << 11, + RCC_APB2_HCLK_DIV_4 = 0x5 << 11, + RCC_APB2_HCLK_DIV_8 = 0x6 << 11, + RCC_APB2_HCLK_DIV_16 = 0x7 << 11, +} rcc_apb2_divider; + +/** + * @brief STM32F1 AHB prescaler dividers + * @see rcc_set_prescaler() + */ +typedef enum rcc_ahb_divider { + RCC_AHB_SYSCLK_DIV_1 = 0x0 << 4, + RCC_AHB_SYSCLK_DIV_2 = 0x8 << 4, + RCC_AHB_SYSCLK_DIV_4 = 0x9 << 4, + RCC_AHB_SYSCLK_DIV_8 = 0xA << 4, + RCC_AHB_SYSCLK_DIV_16 = 0xB << 4, + RCC_AHB_SYSCLK_DIV_32 = 0xC << 4, + RCC_AHB_SYSCLK_DIV_64 = 0xD << 4, + RCC_AHB_SYSCLK_DIV_128 = 0xD << 4, + RCC_AHB_SYSCLK_DIV_256 = 0xE << 4, + RCC_AHB_SYSCLK_DIV_512 = 0xF << 4, +} rcc_ahb_divider; + +/** + * @brief STM32F1 clock sources. + */ +typedef enum rcc_clk { + RCC_CLK_PLL = (uint16)((offsetof(struct rcc_reg_map, CR) << 8) | + RCC_CR_PLLON_BIT), /**< Main PLL, clocked by + HSI or HSE. */ + RCC_CLK_HSE = (uint16)((offsetof(struct rcc_reg_map, CR) << 8) | + RCC_CR_HSEON_BIT), /**< High speed external. */ + RCC_CLK_HSI = (uint16)((offsetof(struct rcc_reg_map, CR) << 8) | + RCC_CR_HSION_BIT), /**< High speed internal. */ + RCC_CLK_LSE = (uint16)((offsetof(struct rcc_reg_map, BDCR) << 8) | + RCC_BDCR_LSEON_BIT), /**< Low-speed external + * (32.768 KHz). */ + RCC_CLK_LSI = (uint16)((offsetof(struct rcc_reg_map, CSR) << 8) | + RCC_CSR_LSION_BIT), /**< Low-speed internal + * (approximately 32 KHz). */ +} rcc_clk; + +/** + * @brief STM32F1 PLL multipliers. + */ +typedef enum rcc_pll_multiplier { + RCC_PLLMUL_2 = (0x0 << 18), + RCC_PLLMUL_3 = (0x1 << 18), + RCC_PLLMUL_4 = (0x2 << 18), + RCC_PLLMUL_5 = (0x3 << 18), + RCC_PLLMUL_6 = (0x4 << 18), + RCC_PLLMUL_7 = (0x5 << 18), + RCC_PLLMUL_8 = (0x6 << 18), + RCC_PLLMUL_9 = (0x7 << 18), + RCC_PLLMUL_10 = (0x8 << 18), + RCC_PLLMUL_11 = (0x9 << 18), + RCC_PLLMUL_12 = (0xA << 18), + RCC_PLLMUL_13 = (0xB << 18), + RCC_PLLMUL_14 = (0xC << 18), + RCC_PLLMUL_15 = (0xD << 18), + RCC_PLLMUL_16 = (0xE << 18), +} rcc_pll_multiplier; + +/* FIXME [0.0.13] Just have data point to an rcc_pll_multiplier! */ + +/** + * @brief STM32F1 PLL configuration values. + * Point to one of these with the "data" field in a struct rcc_pll_cfg. + * @see struct rcc_pll_cfg. + */ +typedef struct stm32f1_rcc_pll_data { + rcc_pll_multiplier pll_mul; /**< PLL multiplication factor. */ +} stm32f1_rcc_pll_data; + +/* + * Deprecated bits. + */ + +/** + * @brief Deprecated; STM32F1 only. + * + * Initialize the clock control system. Initializes the system + * clock source to use the PLL driven by an external oscillator. + * + * @param sysclk_src system clock source, must be PLL + * @param pll_src pll clock source, must be HSE + * @param pll_mul pll multiplier + */ +__deprecated +void rcc_clk_init(rcc_sysclk_src sysclk_src, + rcc_pllsrc pll_src, + rcc_pll_multiplier pll_mul); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/spi.h b/libmaple/stm32f1/include/series/spi.h new file mode 100644 index 0000000..d288a0c --- /dev/null +++ b/libmaple/stm32f1/include/series/spi.h @@ -0,0 +1,99 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011, 2012 LeafLabs, LLC. + * Copyright (c) 2010 Perry Hung. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/spi.h + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief STM32F1 SPI/I2S series header. + */ + +#ifndef _LIBMAPLE_STM32F1_SPI_H_ +#define _LIBMAPLE_STM32F1_SPI_H_ + +#include <libmaple/libmaple_types.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * Register map base pointers + */ + +struct spi_reg_map; + +#define SPI1_BASE ((struct spi_reg_map*)0x40013000) +#define SPI2_BASE ((struct spi_reg_map*)0x40003800) +#define SPI3_BASE ((struct spi_reg_map*)0x40003C00) + +/* + * Device pointers + */ + +struct spi_dev; + +extern struct spi_dev *SPI1; +extern struct spi_dev *SPI2; +#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY) +extern struct spi_dev *SPI3; +#endif + +/* + * Routines + */ + +/* spi_gpio_cfg(): Backwards compatibility shim to spi_config_gpios() */ +struct gpio_dev; +extern void spi_config_gpios(struct spi_dev*, uint8, + struct gpio_dev*, uint8, + struct gpio_dev*, uint8, uint8, uint8); +/** + * @brief Deprecated. Use spi_config_gpios() instead. + * @see spi_config_gpios() + */ +static __always_inline void spi_gpio_cfg(uint8 as_master, + struct gpio_dev *nss_dev, + uint8 nss_bit, + struct gpio_dev *comm_dev, + uint8 sck_bit, + uint8 miso_bit, + uint8 mosi_bit) { + /* We switched style globally to foo_config_gpios() and always + * taking a foo_dev* argument (that last bit is the important + * part) after this function was written. + * + * However, spi_config_gpios() just ignores the spi_dev* on F1, so + * we can still keep this around for older code. */ + spi_config_gpios(NULL, as_master, nss_dev, nss_bit, + comm_dev, sck_bit, miso_bit, mosi_bit); +} + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/stm32.h b/libmaple/stm32f1/include/series/stm32.h new file mode 100644 index 0000000..f6e96f8 --- /dev/null +++ b/libmaple/stm32f1/include/series/stm32.h @@ -0,0 +1,212 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010, 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/stm32.h + * @brief STM32F1 chip- and series-specific definitions. + */ + +#ifndef _LIBMAPLE_STM32F1_H_ +#define _LIBMAPLE_STM32F1_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#define STM32_MCU_SERIES STM32_SERIES_F1 + +/* The STM32F1 series is subdivided into "lines". libmaple currently + * officially supports STM32F103 performance line MCUs (see the + * MCU-specific value section below). + * + * You can use these F1 line defines if porting libmaple to support + * MCUs on other lines. */ +/** STM32F1 value line (STM32F100 MCUs). */ +#define STM32_F1_LINE_VALUE 0 +/** STM32F1 access line (STM32F101 MCUs). */ +#define STM32_F1_LINE_ACCESS 1 +/** STM32F1 USB access line (STM32F102 MCUs). */ +#define STM32_F1_LINE_USB_ACCESS 2 +/** STM32F1 performance line (STM32F103 MCUs). */ +#define STM32_F1_LINE_PERFORMANCE 3 +/** STM32F1 connectivity line (STM32F105/F107 MCUs). */ +#define STM32_F1_LINE_CONNECTIVITY 5 + +/* + * MCU-specific values. + * + * You can use this section to override any of the below settings on a + * per-MCU basis. For example, if your MCU has different STM32_PCLK1 + * or STM32_PCLK2 values, you can set them here and the values for + * STM32F103 microcontrollers set below won't take effect. + */ + +#if defined(MCU_STM32F103RB) +# define STM32_F1_LINE STM32_F1_LINE_PERFORMANCE +# define STM32_NR_GPIO_PORTS 4 +# define STM32_SRAM_END ((void*)0x20005000) +# define STM32_MEDIUM_DENSITY + +#elif defined(MCU_STM32F103ZE) +# define STM32_F1_LINE STM32_F1_LINE_PERFORMANCE +# define STM32_NR_GPIO_PORTS 7 +# define STM32_SRAM_END ((void*)0x20010000) +# define STM32_HIGH_DENSITY + +#elif defined(MCU_STM32F103CB) +# define STM32_F1_LINE STM32_F1_LINE_PERFORMANCE + /* This STM32_NR_GPIO_PORTS is not true, but only pins 0 and + * exist, and they're used for OSC (e.g. on LeafLabs' Maple Mini), + * so we'll live with this for now. */ +# define STM32_NR_GPIO_PORTS 3 +# define STM32_SRAM_END ((void*)0x20005000) +# define STM32_MEDIUM_DENSITY + +#elif defined(MCU_STM32F103RE) +# define STM32_F1_LINE STM32_F1_LINE_PERFORMANCE +# define STM32_NR_GPIO_PORTS 4 +# define STM32_SRAM_END ((void*)0x20010000) +# define STM32_HIGH_DENSITY + +#elif defined(MCU_STM32F100RB) +# define STM32_F1_LINE STM32_F1_LINE_VALUE +# define STM32_NR_GPIO_PORTS 4 +# define STM32_TIMER_MASK 0x380DE /* Timers: 1-4, 6, 7, 15-17. */ +# define STM32_SRAM_END ((void*)0x20002000) +# define STM32_MEDIUM_DENSITY + +#else +#warning "Unsupported or unspecified STM32F1 MCU." +#endif + +/* + * Derived values. + */ + +#if STM32_F1_LINE == STM32_F1_LINE_PERFORMANCE + /* All supported performance line MCUs have a USB peripheral */ +# define STM32_HAVE_USB 1 + +# ifdef STM32_MEDIUM_DENSITY +# define STM32_NR_INTERRUPTS 43 +# define STM32_TIMER_MASK 0x1E /* TIMER1--TIMER4 */ +# define STM32_HAVE_FSMC 0 +# define STM32_HAVE_DAC 0 +# elif defined(STM32_HIGH_DENSITY) +# define STM32_NR_INTERRUPTS 60 +# define STM32_TIMER_MASK 0x1FE /* TIMER1--TIMER8 */ +# define STM32_HAVE_FSMC 1 +# define STM32_HAVE_DAC 1 +# elif defined(STM32_XL_DENSITY) +# define STM32_NR_INTERRUPTS 60 +# define STM32_TIMER_MASK 0x7FFE /* TIMER1--TIMER14 */ +# define STM32_HAVE_FSMC 1 +# define STM32_HAVE_DAC 1 +# endif + +#elif STM32_F1_LINE == STM32_F1_LINE_VALUE + /* Value line MCUs don't have USB peripherals. */ +# define STM32_HAVE_USB 0 + +# ifdef STM32_MEDIUM_DENSITY +# define STM32_NR_INTERRUPTS 56 +# define STM32_HAVE_FSMC 0 +# define STM32_HAVE_DAC 1 +# elif defined(STM32_HIGH_DENSITY) + /* 61 interrupts here counts the possibility for a remapped + * DMA2 channel 5 IRQ occurring at NVIC index 60. */ +# define STM32_NR_INTERRUPTS 61 +# define STM32_HAVE_FSMC 1 +# define STM32_HAVE_DAC 1 +# endif + +#endif + +/* + * Clock configuration. + * + * You can patch these for your line, MCU, clock configuration, + * etc. here or by setting cflags when compiling libmaple. + */ + +#if STM32_F1_LINE == STM32_F1_LINE_PERFORMANCE +# ifndef STM32_PCLK1 +# define STM32_PCLK1 36000000U +# endif +# ifndef STM32_PCLK2 +# define STM32_PCLK2 72000000U +# endif +# ifndef STM32_DELAY_US_MULT +# define STM32_DELAY_US_MULT 12 /* FIXME: value is incorrect. */ +# endif +#elif STM32_F1_LINE == STM32_F1_LINE_VALUE /* TODO */ +# ifndef STM32_PCLK1 +# define STM32_PCLK1 12000000U +# endif +# ifndef STM32_PCLK2 +# define STM32_PCLK2 24000000U +# endif +# ifndef STM32_DELAY_US_MULT +# define STM32_DELAY_US_MULT 8 /* FIXME: value is incorrect. */ +# endif +#elif STM32_F1_LINE == STM32_F1_LINE_ACCESS /* TODO */ +#elif STM32_F1_LINE == STM32_F1_LINE_USB_ACCESS /* TODO */ +#elif STM32_F1_LINE == STM32_F1_LINE_CONNECTIVITY /* TODO */ +#endif + +/* + * Sanity checks. + * + * Make sure we have the F1-specific defines we need. + * <libmaple/stm32.h> will check that we've defined everything it needs. + */ + +#if !defined(STM32_F1_LINE) +#error "Bad STM32F1 configuration. Check STM32F1 <series/stm32.h> header." +#endif + +/* + * Doxygen + */ + +#ifdef __DOXYGEN__ + +/** + * @brief STM32 line value for the STM32F1 MCU being targeted. + * + * At time of writing, allowed values are: STM32_F1_LINE_PERFORMANCE, + * STM32_F1_LINE_VALUE. This set of values may expand as libmaple adds + * support for more STM32F1 lines. + */ +#define STM32_F1_LINE + +#endif /* __DOXYGEN__ */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/timer.h b/libmaple/stm32f1/include/series/timer.h new file mode 100644 index 0000000..cfeb770 --- /dev/null +++ b/libmaple/stm32f1/include/series/timer.h @@ -0,0 +1,128 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/timer.h + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief STM32F1 timer support. + */ + +#ifndef _LIBMAPLE_STM32F1_TIMER_H_ +#define _LIBMAPLE_STM32F1_TIMER_H_ + +#include <libmaple/libmaple_types.h> + +/* + * Register maps and base pointers + */ + +/** STM32F1 general purpose timer register map type */ +typedef struct timer_gen_reg_map { + __io uint32 CR1; /**< Control register 1 */ + __io uint32 CR2; /**< Control register 2 */ + __io uint32 SMCR; /**< Slave mode control register */ + __io uint32 DIER; /**< DMA/Interrupt enable register */ + __io uint32 SR; /**< Status register */ + __io uint32 EGR; /**< Event generation register */ + __io uint32 CCMR1; /**< Capture/compare mode register 1 */ + __io uint32 CCMR2; /**< Capture/compare mode register 2 */ + __io uint32 CCER; /**< Capture/compare enable register */ + __io uint32 CNT; /**< Counter */ + __io uint32 PSC; /**< Prescaler */ + __io uint32 ARR; /**< Auto-reload register */ + const uint32 RESERVED1; /**< Reserved */ + __io uint32 CCR1; /**< Capture/compare register 1 */ + __io uint32 CCR2; /**< Capture/compare register 2 */ + __io uint32 CCR3; /**< Capture/compare register 3 */ + __io uint32 CCR4; /**< Capture/compare register 4 */ + const uint32 RESERVED2; /**< Reserved */ + __io uint32 DCR; /**< DMA control register */ + __io uint32 DMAR; /**< DMA address for full transfer */ +} timer_gen_reg_map; + +struct timer_adv_reg_map; +struct timer_bas_reg_map; + +/** Timer 1 register map base pointer */ +#define TIMER1_BASE ((struct timer_adv_reg_map*)0x40012C00) +/** Timer 2 register map base pointer */ +#define TIMER2_BASE ((struct timer_gen_reg_map*)0x40000000) +/** Timer 3 register map base pointer */ +#define TIMER3_BASE ((struct timer_gen_reg_map*)0x40000400) +/** Timer 4 register map base pointer */ +#define TIMER4_BASE ((struct timer_gen_reg_map*)0x40000800) +/** Timer 5 register map base pointer */ +#define TIMER5_BASE ((struct timer_gen_reg_map*)0x40000C00) +/** Timer 6 register map base pointer */ +#define TIMER6_BASE ((struct timer_bas_reg_map*)0x40001000) +/** Timer 7 register map base pointer */ +#define TIMER7_BASE ((struct timer_bas_reg_map*)0x40001400) +/** Timer 8 register map base pointer */ +#define TIMER8_BASE ((struct timer_adv_reg_map*)0x40013400) +/** Timer 9 register map base pointer */ +#define TIMER9_BASE ((struct timer_gen_reg_map*)0x40014C00) +/** Timer 10 register map base pointer */ +#define TIMER10_BASE ((struct timer_gen_reg_map*)0x40015000) +/** Timer 11 register map base pointer */ +#define TIMER11_BASE ((struct timer_gen_reg_map*)0x40015400) +/** Timer 12 register map base pointer */ +#define TIMER12_BASE ((struct timer_gen_reg_map*)0x40001800) +/** Timer 13 register map base pointer */ +#define TIMER13_BASE ((struct timer_gen_reg_map*)0x40001C00) +/** Timer 14 register map base pointer */ +#define TIMER14_BASE ((struct timer_gen_reg_map*)0x40002000) + +/* + * Device pointers + * + * We only declare device pointers to timers which actually exist on + * the target MCU. This helps when porting programs to STM32F1 (or + * within F1 to a lower density MCU), as attempts to use nonexistent + * timers cause build errors instead of undefined behavior. + */ + +struct timer_dev; + +extern struct timer_dev *TIMER1; +extern struct timer_dev *TIMER2; +extern struct timer_dev *TIMER3; +extern struct timer_dev *TIMER4; +#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY) +extern struct timer_dev *TIMER5; +extern struct timer_dev *TIMER6; +extern struct timer_dev *TIMER7; +extern struct timer_dev *TIMER8; +#endif +#ifdef STM32_XL_DENSITY +extern struct timer_dev *TIMER9; +extern struct timer_dev *TIMER10; +extern struct timer_dev *TIMER11; +extern struct timer_dev *TIMER12; +extern struct timer_dev *TIMER13; +extern struct timer_dev *TIMER14; +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/usart.h b/libmaple/stm32f1/include/series/usart.h new file mode 100644 index 0000000..d12a3e2 --- /dev/null +++ b/libmaple/stm32f1/include/series/usart.h @@ -0,0 +1,76 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/include/series/usart.h + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief STM32F1 USART support. + */ + +#ifndef _LIBMAPLE_STM32F1_USART_H_ +#define _LIBMAPLE_STM32F1_USART_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +/* + * Register map base pointers + */ + +struct usart_reg_map; + +/** USART1 register map base pointer */ +#define USART1_BASE ((struct usart_reg_map*)0x40013800) +/** USART2 register map base pointer */ +#define USART2_BASE ((struct usart_reg_map*)0x40004400) +/** USART3 register map base pointer */ +#define USART3_BASE ((struct usart_reg_map*)0x40004800) +#ifdef STM32_HIGH_DENSITY +/** UART4 register map base pointer */ +#define UART4_BASE ((struct usart_reg_map*)0x40004C00) +/** UART5 register map base pointer */ +#define UART5_BASE ((struct usart_reg_map*)0x40005000) +#endif + +/* + * Devices + */ + +struct usart_dev; +extern struct usart_dev *USART1; +extern struct usart_dev *USART2; +extern struct usart_dev *USART3; +#ifdef STM32_HIGH_DENSITY +extern struct usart_dev *UART4; +extern struct usart_dev *UART5; +#endif + +#ifdef __cplusplus +} +#endif + +#endif |