1 files changed, 0 insertions, 99 deletions
diff --git a/docs/source/lang/api/shiftout.rst b/docs/source/lang/api/shiftout.rst
deleted file mode 100644
index 1d9ba12..0000000
--- a/docs/source/lang/api/shiftout.rst
+++ /dev/null
@@ -1,99 +0,0 @@
-.. highlight:: cpp
-
-.. _lang-shiftout:
-
-shiftOut()
-==========
-
-Shift out a byte of data, one bit at a time.
-
-.. contents:: Contents
-   :local:
-
-Library Documentation
----------------------
-
-.. doxygenfunction:: shiftOut
-
-Discussion
-----------
-
-This is a software implementation.  There is also a hardware :ref:`SPI
-<spi>` library available which will be faster and consume less CPU
-cycles than this function.
-
-Note that the ``dataPin`` and ``clockPin`` must already be configured
-to :ref:`OUTPUT <lang-constants-output>` mode by a call to
-:ref:`pinMode() <lang-pinmode>`.
-
-Also note that since shiftOut() outputs 1 byte (8 bits) at a time, it
-requires multiple steps to output values larger than 255.
-
-Examples
---------
-
-To use these examples, replace ``dataPin`` and ``clockPin`` with the
-numbers of the pins you want to use::
-
-    /* MSBFIRST example */
-
-    uint16 data = 500;
-    // shift out high byte
-    shiftOut(dataPin, clockPin, MSBFIRST, (data >> 8));
-    // shift out low byte
-    shiftOut(dataPin, clockPin, MSBFIRST, data);
-
-    /* LSBFIRST serial */
-
-    data = 500;
-    // shift out low byte
-    shiftOut(dataPin, clockPin, LSBFIRST, data);
-    // shift out high byte
-    shiftOut(dataPin, clockPin, LSBFIRST, (data >> 8));
-
-Arduino Tutorial Example
-------------------------
-
-This Arduino example runs unmodified on the Maple.  For accompanying
-circuit, see the `tutorial on controlling a 74HC595 shift register
-<http://arduino.cc/en/Tutorial/ShiftOut>`_.
-
-::
-
-    //**************************************************************//
-    //  Name    : shiftOutCode, Hello World                         //
-    //  Author  : Carlyn Maw, Tom Igoe                              //
-    //  Date    : 25 Oct, 2006                                      //
-    //  Version : 1.0                                               //
-    //  Notes   : Code for using a 74HC595 Shift Register           //
-    //          : to count from 0 to 255                            //
-    //**************************************************************//
-
-    // Pin connected to ST_CP of 74HC595
-    int latchPin = 8;
-    // Pin connected to SH_CP of 74HC595
-    int clockPin = 12;
-    // Pin connected to DS of 74HC595
-    int dataPin = 11;
-
-    void setup() {
-      // Set pins to output because they are addressed in the main loop
-      pinMode(latchPin, OUTPUT);
-      pinMode(clockPin, OUTPUT);
-      pinMode(dataPin, OUTPUT);
-    }
-
-    void loop() {
-      // Count up routine
-      for (int j = 0; j < 256; j++) {
-        // Ground latchPin and hold low for as long as you are transmitting
-        digitalWrite(latchPin, LOW);
-        shiftOut(dataPin, clockPin, LSBFIRST, j);
-        // Return the latch pin high to signal chip that it
-        // no longer needs to listen for information
-        digitalWrite(latchPin, HIGH);
-        delay(1000);
-      }
-    }
-
-.. include:: /lang/cc-attribution.txt