Keep it 80-column clean.

Go through overlong source code lines and convert as many of them as
appropriate to be 80-column clean.  This mostly affects license
headers.  Overlong lines are determined by running following from the
libmaple base directory:

$ ack-grep --nocolor --nogroup --cpp --cc --ignore-dir=usb -- '.{80}'

Note that this excludes libmaple's usb subdirectory, which is still
full of ST code that doesn't follow the libmaple source code
guidelines.

Contents of ~/.ackrc (these won't matter, but are included for
completeness):

--ignore-dir=docs
--ignore-dir=build
--type-set
ld=.ld
--type-set
rst=.rst
--type-set
txt=.txt
--type-set
mk=.mk

1 files changed, 4 insertions, 3 deletions

diff --git a/libraries/LiquidCrystal/LiquidCrystal.cpp b/libraries/LiquidCrystal/LiquidCrystal.cpp
index f05aed8..85e19ef 100644
--- a/libraries/LiquidCrystal/LiquidCrystal.cpp
+++ b/libraries/LiquidCrystal/LiquidCrystal.cpp
@@ -102,9 +102,10 @@ void LiquidCrystal::begin(uint8 cols, uint8 lines, uint8 dotsize) {
     _displayfunction |= LCD_5x10DOTS;
   }
 
-  // SEE PAGE 45/46 FOR INITIALIZATION SPECIFICATION!
-  // according to datasheet, we need at least 40ms after power rises above 2.7V
-  // before sending commands. Arduino can turn on way befer 4.5V so we'll wait 50
+  // SEE PAGE 45/46 FOR INITIALIZATION SPECIFICATION!  according to
+  // datasheet, we need at least 40ms after power rises above 2.7V
+  // before sending commands. Arduino can turn on way befer 4.5V so
+  // we'll wait 50
   delay(50);    // Maple mod
   //delayMicroseconds(50000);
   // Now we pull both RS and R/W low to begin commands