From bbf1bd6d6199ea0600af7fbf07d507d1b791ca36 Mon Sep 17 00:00:00 2001 From: Marti Bolivar Date: Tue, 7 Jun 2011 14:44:39 -0400 Subject: Keep it 80-column clean. Go through overlong source code lines and convert as many of them as appropriate to be 80-column clean. This mostly affects license headers. Overlong lines are determined by running following from the libmaple base directory: $ ack-grep --nocolor --nogroup --cpp --cc --ignore-dir=usb -- '.{80}' Note that this excludes libmaple's usb subdirectory, which is still full of ST code that doesn't follow the libmaple source code guidelines. Contents of ~/.ackrc (these won't matter, but are included for completeness): --ignore-dir=docs --ignore-dir=build --type-set ld=.ld --type-set rst=.rst --type-set txt=.txt --type-set mk=.mk --- libraries/LiquidCrystal/LiquidCrystal.cpp | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'libraries/LiquidCrystal') diff --git a/libraries/LiquidCrystal/LiquidCrystal.cpp b/libraries/LiquidCrystal/LiquidCrystal.cpp index f05aed8..85e19ef 100644 --- a/libraries/LiquidCrystal/LiquidCrystal.cpp +++ b/libraries/LiquidCrystal/LiquidCrystal.cpp @@ -102,9 +102,10 @@ void LiquidCrystal::begin(uint8 cols, uint8 lines, uint8 dotsize) { _displayfunction |= LCD_5x10DOTS; } - // SEE PAGE 45/46 FOR INITIALIZATION SPECIFICATION! - // according to datasheet, we need at least 40ms after power rises above 2.7V - // before sending commands. Arduino can turn on way befer 4.5V so we'll wait 50 + // SEE PAGE 45/46 FOR INITIALIZATION SPECIFICATION! according to + // datasheet, we need at least 40ms after power rises above 2.7V + // before sending commands. Arduino can turn on way befer 4.5V so + // we'll wait 50 delay(50); // Maple mod //delayMicroseconds(50000); // Now we pull both RS and R/W low to begin commands -- cgit v1.2.3