5 files changed, 8 insertions, 75 deletions
diff --git a/freedom-maker/bin/copy2dream b/freedom-maker/bin/copy2dream
deleted file mode 100644
index 267c2b6..0000000
--- a/freedom-maker/bin/copy2dream
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/bin/sh
-#
-# this script assumes the current root filesystem is the source, and the
-# internal microSD on a DreamPlug is the target .. all existing content on
-# the microSD card will be lost.
-#
-
-# partition microSD card inside DreamPlug
-echo "=> partition internal microSD card"
-parted -s /dev/sda mklabel msdos
-parted -s /dev/sda mkpart primary fat16 0 128
-parted -s /dev/sda mkpart primary ext2 128 100%
-
-# create filesystems on new partitions
-echo "=> create filesystems on internal microSD card"
-mkdosfs /dev/sda1
-mke2fs -j /dev/sda2
-
-echo "=> mount target partitions"
-mount /dev/sda2 /media
-mkdir -p /media/boot
-mount /dev/sda1 /media/boot
-
-echo "=> copy filesystem content from USB stick to target partitions"
-(cd / ; tar cpSf - `/bin/ls | grep -v boot | grep -v proc | grep -v sys | grep -v media | grep -v dev`) | (cd /media ; tar xpf -)
-# the following intentionally ignores subdirectories 
-cp /boot/* /media/boot/
-
-echo "=> touch up target root partition"
-mkdir /media/proc /media/sys /media/media /media/dev
-mknod /media/dev/console c 5 1
-mknod /media/dev/random c 1 8
-mknod /media/dev/urandom c 1 9
-mknod /media/dev/null c 1 3
-mknod /media/dev/ptmx c 5 2
-
-# patch up /etc/fstab entry for /boot
-sed -e 's/sdc/sda/g' < /etc/fstab > /media/etc/fstab
-
-# flash the kernel and create the device's keys
-chroot /media /etc/init.d/first-run
-
-echo "unmount target partitions"
-umount /dev/sda1
-umount /dev/sda2
-
-echo "=> installation complete, see docs to boot from internal microSD"
diff --git a/freedom-maker/flashing-notes b/freedom-maker/flashing-notes
deleted file mode 100644
index def3f61..0000000
--- a/freedom-maker/flashing-notes
+++ /dev/null
@@ -1,28 +0,0 @@
-Jason <u-boot@lakedaemon.net> says:
-
-  Sort of.  The openocd config for the sheevaplug/guruplug is what I use,
-  and is distributed on the dreamplug download page [1].  It does _not_
-  have support for the SPI flash.  You can also use the sheevaplug.cfg
-  shipped with openocd.  So, I use openocd or tftp to transfer to RAM,
-  then use u-boot to write to flash.
-
-  To test images, or to reflash, I load the known-good u-boot into RAM via
-  openocd, then I'll either reflash it or load a new testing one from
-  there.
-
-  To write a u-boot.kwb test image to flash, here is what I do:
-
-  openocd$ sheevaplug_init
-  openocd$ load_image u-boot                 # known good from Marvell
-  openocd$ load_image u-boot.kwb 0x00800000  # monster I created
-  openocd$ resume 0x00600000                 # run the known good
-
-  then, in u-boot
-
-  u-boot$ sf probe 0
-  u-boot$ sf erase 0x0 0x100000
-  u-boot$ sf write 0x00800000 0x0 0x100000
-
-  If time allows, I'd like to add SPI flash support to OpenOCD.
-  Unfortunately, time is short and the above process works.
-
diff --git a/freedom-maker/source/boot/uboot.2012.04.01-2_armel.elf b/freedom-maker/source/boot/uboot.2012.04.01-2_armel.elf
new file mode 100644
index 0000000..ab58a26
--- /dev/null
+++ b/freedom-maker/source/boot/uboot.2012.04.01-2_armel.elf
diff --git a/freedom-maker/source/boot/uboot.2012.04.01-2_armel.kwb b/freedom-maker/source/boot/uboot.2012.04.01-2_armel.kwb
new file mode 100644
index 0000000..c524936
--- /dev/null
+++ b/freedom-maker/source/boot/uboot.2012.04.01-2_armel.kwb
diff --git a/freedom-maker/source/boot/uboot.env b/freedom-maker/source/boot/uboot.env
new file mode 100644
index 0000000..06cb618
--- /dev/null
+++ b/freedom-maker/source/boot/uboot.env
@@ -0,0 +1,8 @@
+setenv baudrate 115200
+setenv bootcmd '${x_bootcmd_usb}; ${x_bootcmd_kernel}; ${x_bootcmd_initrd}; setenv bootargs ${x_bootargs} ${x_bootargs_root} ${x_bootargs_console}; bootm 0x6400000 0x6900000;'
+setenv x_bootargs_console 'ttyS0,115200'
+setenv x_bootargs_root 'root=/dev/sdb2 rootdelay=10'
+setenv x_bootcmd_initrd 'fatload usb 1:1 0x6900000 uInitrd'
+setenv x_bootcmd_kernel 'fatload usb 1:1 0x6400000 uImage'
+setenv x_bootcmd_usb 'usb start'
+saveenv