path: root/.pinerc

#
# Pine configuration file
#
# This file sets the configuration options used by Pine and PC-Pine. These
# options are usually set from within Pine or PC-Pine. There may be a
# system-wide configuration file which sets the defaults for some of the
# variables. On Unix, run pine -conf to see how system defaults have been set.
# For variables that accept multiple values, list elements are separated by
# commas. A line beginning with a space or tab is considered to be a
# continuation of the previous line. For a variable to be unset its value must
# be blank. To set a variable to the empty string its value should be "".
# You can override system defaults by setting a variable to the empty string.
# Lines beginning with "#" are comments, and ignored by Pine.

# Over-rides your full name from Unix password file. Required for PC-Pine.
personal-name=""

# Sets domain part of From: and local addresses in outgoing mail.
user-domain=robocracy.org

# List of SMTP servers for sending mail. If blank: Unix Pine uses sendmail.
smtp-server=mail.robocracy.org:587/tls/user=bnewbold/novalidate-cert

# NNTP server for posting news. Also sets news-collections for news reading.
nntp-server=

# Path of (local or remote) INBOX, e.g. ={mail.somewhere.edu}inbox
# Normal Unix default is the local INBOX (usually /usr/spool/mail/$USER).
inbox-path={mail.robocracy.org/ssl/user=bnewbold/novalidate-cert}INBOX

# List of folder pairs; the first indicates a folder to archive, and the
# second indicates the folder read messages in the first should
# be moved to.
incoming-archive-folders=

# List of folders, assumed to be in first folder collection,
# offered for pruning each month.  For example: mumble
pruned-folders=

# Over-rides default path for sent-mail folder, e.g. =old-mail (using first
# folder collection dir) or ={host2}sent-mail or ="" (to suppress saving).
# Default: sent-mail (Unix) or SENTMAIL.MTX (PC) in default folder collection.
default-fcc=

# Over-rides default path for saved-msg folder, e.g. =saved-messages (using 1st
# folder collection dir) or ={host2}saved-mail or ="" (to suppress saving).
# Default: saved-messages (Unix) or SAVEMAIL.MTX (PC) in default collection.
default-saved-msg-folder=archive

# Over-rides default path for postponed messages folder, e.g. =pm (which uses
# first folder collection dir) or ={host4}pm (using home dir on host4).
# Default: postponed-msgs (Unix) or POSTPOND.MTX (PC) in default fldr coltn.
postponed-folder=

# If set, specifies where already-read messages will be moved upon quitting.
read-message-folder=

# If set, specifies where form letters should be stored.
form-letter-folder=

# Contains the actual signature contents as opposed to the signature filename.
# If defined, this overrides the signature-file. Default is undefined.
literal-signature=

# Over-rides default path for signature file. Default is ~/.signature
signature-file=

# List of features; see Pine's Setup/options menu for the current set.
# e.g. feature-list= select-without-confirm, signature-at-bottom
# Default condition for all of the features is no-.
feature-list=enable-flag-cmd,
	enable-flag-screen-keyword-shortcut,
	enable-unix-pipe-cmd,
	quell-dead-letter-on-cancel,
	quell-charset-warning,
	use-current-dir,
	prefer-plain-text,
	no-copy-to-address-to-from-if-it-is-us

# Pine executes these keys upon startup (e.g. to view msg 13: i,j,1,3,CR,v)
initial-keystroke-list=

# Only show these headers (by default) when composing messages
default-composer-hdrs=

# Add these customized headers (and possible default values) when composing
customized-hdrs=From:,
	Reply-To:

# When viewing messages, include this list of headers
viewer-hdrs=

# When viewing messages, number of blank spaces between left display edge and text
viewer-margin-left=

# When viewing messages, number of blank spaces between right display edge and text
viewer-margin-right=

# When viewing messages, number of lines of quote displayed before suppressing
quote-suppression-threshold=

# Determines default folder name for Saves...
# Choices: default-folder, by-sender, by-from, by-recipient, last-folder-used.
# Default: "default-folder", i.e. "saved-messages" (Unix) or "SAVEMAIL" (PC).
saved-msg-name-rule=

# Determines default name for Fcc...
# Choices: default-fcc, by-recipient, last-fcc-used.
# Default: "default-fcc" (see also "default-fcc=" variable.)
fcc-name-rule=

# Sets presentation order of messages in Index. Choices:
# Subject, From, Arrival, Date, Size, To, Cc, OrderedSubj, Score, and Thread.
# Order may be reversed by appending /Reverse. Default: "Arrival".
sort-key=

# Sets presentation order of address book entries. Choices: dont-sort,
# fullname-with-lists-last, fullname, nickname-with-lists-last, nickname
# Default: "fullname-with-lists-last".
addrbook-sort-rule=

# Sets presentation order of folder list entries. Choices: alphabetical,
# alpha-with-dirs-last, alpha-with-dirs-first.
# Default: "alpha-with-directories-last".
folder-sort-rule=

# Sets the default folder and collectionoffered at the Goto Command's prompt.
goto-default-rule=

# Sets message which cursor begins on. Choices: first-unseen, first-recent,
# first-important, first-important-or-unseen, first-important-or-recent,
# first, last. Default: "first-unseen".
incoming-startup-rule=

# Allows a default answer for the prune folder questions. Choices: yes-ask,
# yes-no, no-ask, no-no, ask-ask, ask-no. Default: "ask-ask".
pruning-rule=

# Controls behavior when reopening an already open folder.
folder-reopen-rule=

# Style that MESSAGE INDEX is displayed in when threading.
threading-display-style=mutt

# Style of THREAD INDEX or default MESSAGE INDEX when threading.
threading-index-style=

# When threading, character used to indicate collapsed messages underneath.
threading-indicator-character=

# When threading, character used to indicate expanded messages underneath.
threading-expanded-character=

# When threading, character used to indicate this is the last reply
# to the parent of this message.
threading-lastreply-character=

# Reflects capabilities of the display you have. Default: US-ASCII.
# Typical alternatives include ISO-8859-x, (x is a number between 1 and 9).
character-set=

# Specifies the program invoked by ^_ in the Composer,
# or the "enable-alternate-editor-implicitly" feature.
editor=

# Specifies the program invoked by ^T in the Composer.
speller=/usr/bin/aspell --mode=email check

# Specifies the column of the screen where the composer should wrap.
composer-wrap-column=

# Specifies the string to insert when replying to a message.
reply-indent-string=

# Specifies the introduction to insert when replying to a message.
reply-leadin=

# Specifies the string to replace quotes with when viewing a message.
quote-replace-string=

# Specifies the string to use when sending a  message with no to or cc.
empty-header-message=

# Program to view images (e.g. GIF or TIFF attachments).
image-viewer=

# If "user-domain" not set, strips hostname in FROM address. (Unix only)
use-only-domain-name=

# This variable takes a list of programs that message text is piped into
# after MIME decoding, prior to display.
display-filters=_BEGINNING("-----BEGIN PGP")_ ~/bin/ez-pine-gpg-incoming

# This defines a program that message text is piped into before MIME
# encoding, prior to sending
sending-filters=~/bin/ez-pine-gpg-sign-and-encrypt _INCLUDEALLHDRS_ _RECIPIENTS_,
	~/bin/ez-pine-gpg-encrypt _RECIPIENTS_,
	~/bin/ez-pine-gpg-sign _INCLUDEALLHDRS_,
	~/bin/ez-pine-gpg-symmetric

# A list of alternate addresses the user is known by
alt-addresses=bnewbold@alum.mit.edu,
	bnewbold@mit.edu,
	bnewbold@cfa.harvard.edu,
	bnewbold@robocracy.org,
	bnewbold@gmail.com,
	bnewbold@leaflabs.com,
	bnewbold@bnewbold.net

# A list of keywords for use in categorizing messages
keywords=

# Characters which surround keywords in SUBJKEY token.
# Default is "{" "} "
keyword-surrounding-chars=

# This is a list of formats for address books.  Each entry in the list is made
# up of space-delimited tokens telling which fields are displayed and in
# which order.  See help text
addressbook-formats=

# This gives a format for displaying the index.  It is made
# up of space-delimited tokens telling which fields are displayed and in
# which order.  See help text
index-format=

# The number of lines of overlap when scrolling through message text
viewer-overlap=

# Number of lines from top and bottom of screen where single
# line scrolling occurs.
scroll-margin=

# The number of seconds to sleep after writing a status message
status-message-delay=

# The approximate number of seconds between checks for new mail
mail-check-interval=

# The approximate number of seconds between checks for new mail in folders
# other than the current folder and inbox.
# Default is same as mail-check-interval
mail-check-interval-noncurrent=

# The minimum number of seconds between checks for new mail in a Mail Drop.
# This is always effectively at least as large as the mail-check-interval
maildrop-check-minimum=

# For newsgroups accessed using NNTP, only messages numbered in the range
# lastmsg-range+1 to lastmsg will be considered
nntp-range=

# Full path and name of NEWSRC file
newsrc-path=

# Path and filename of news configuration's active file.
# The default is typically "/usr/lib/news/active".
news-active-file-path=

# Directory containing system's news data.
# The default is typically "/usr/spool/news"
news-spool-directory=

# Path and filename of the program used to upload text from your terminal
# emulator's into Pine's composer.
upload-command=

# Text sent to terminal emulator prior to invoking the program defined by
# the upload-command variable.
# Note: _FILE_ will be replaced with the temporary file used in the upload.
upload-command-prefix=

# Path and filename of the program used to download text via your terminal
# emulator from Pine's export and save commands.
download-command=

# Text sent to terminal emulator prior to invoking the program defined by
# the download-command variable.
# Note: _FILE_ will be replaced with the temporary file used in the downlaod.
download-command-prefix=

# Sets the search path for the mailcap configuration file.
# NOTE: colon delimited under UNIX, semi-colon delimited under DOS/Windows/OS2.
mailcap-search-path=

# Sets the search path for the mimetypes configuration file.
# NOTE: colon delimited under UNIX, semi-colon delimited under DOS/Windows/OS2.
mimetype-search-path=

# List of programs to open Internet URLs (e.g. http or ftp references).
url-viewers=/usr/bin/chromium-browser

# The maximum number of non-stayopen remote connections that pine will use
max-remote-connections=

# A list of folders that should be left open once opened (INBOX is implicit)
stay-open-folders=

# Specifies the number of dead letter files to keep when canceling.
dead-letter-files=

# Sets the filename for the newmail fifo (named pipe). Unix only.
newmail-fifo-path=

# Sets the width for the NewMail screen.
newmail-window-width=

# List of incoming msg folders besides INBOX, e.g. ={host2}inbox, {host3}inbox
# Syntax: optnl-label {optnl-imap-host-name}folder-path
incoming-folders=

# List of directories where saved-message folders may be. First one is
# the default for Saves. Example: Main {host1}mail/[], Desktop mail\[]
# Syntax: optnl-label {optnl-imap-hostname}optnl-directory-path[]
folder-collections="robocracy" {mail.robocracy.org/ssl/user=bnewbold/novalidate-cert}INBOX.[],
	mail/[]

# List, only needed if nntp-server not set, or news is on a different host
# than used for NNTP posting. Examples: News *[] or News *{host3/nntp}[]
# Syntax: optnl-label *{news-host/protocol}[]
news-collections=

# List of file or path names for personal addressbook(s).
# Default: ~/.addressbook (Unix) or \PINE\ADDRBOOK (PC)
# Syntax: optnl-label path-name
address-book=remote {mail.robocracy.org/ssl/user=bnewbold/novalidate-cert}remote_addrbook

# List of file or path names for global/shared addressbook(s).
# Default: none
# Syntax: optnl-label path-name
global-address-book=

# Set by Pine; controls beginning-of-month sent-mail pruning.
last-time-prune-questioned=199.11

# Set by Pine; controls display of "new version" message.
last-version-used=6.02

# This names the path to an alternative program, and any necessary arguments,
# to be used in posting mail messages.  Example:
#                    /usr/lib/sendmail -oem -t -oi
# or,
#                    /usr/local/bin/sendit.sh
# The latter a script found in Pine distribution's contrib/util directory.
# NOTE: The program MUST read the message to be posted on standard input,
#       AND operate in the style of sendmail's "-t" option.
sendmail-path=

# This names the root of the tree to which the user is restricted when reading
# and writing folders and files.  For example, on Unix ~/work confines the
# user to the subtree beginning with their work subdirectory.
# (Note: this alone is not sufficient for preventing access.  You will also
# need to restrict shell access and so on, see Pine Technical Notes.)
# Default: not set (so no restriction)
operating-dir=

# If no user input for this many hours, Pine will exit if in an idle loop
# waiting for a new command.  If set to zero (the default), then there will
# be no timeout.
user-input-timeout=

# Sets the time in seconds that Pine will attempt to open a network
# connection.  The default is 30, the minimum is 5, and the maximum is
# system defined (typically 75).
tcp-open-timeout=

# Network read warning timeout. The default is 15, the minimum is 5, and the
# maximum is 1000.
tcp-read-warning-timeout=

# Network write warning timeout. The default is 0 (unset), the minimum
# is 5 (if not 0), and the maximum is 1000.
tcp-write-warning-timeout=

# If this much time has elapsed at the time of a tcp read or write
# timeout, pine will ask if you want to break the connection.
# Default is 60 seconds, minimum is 5, maximum is 1000.
tcp-query-timeout=

# Sets the format of the command used to open a UNIX remote
# shell connection.  The default is "%s %s -l %s exec /etc/r%sd"
# NOTE: the 4 (four) "%s" entries MUST exist in the provided command
# where the first is for the command's path, the second is for the
# host to connect to, the third is for the user to connect as, and the
# fourth is for the connection method (typically "imap")
rsh-command=

# Sets the name of the command used to open a UNIX remote shell connection.
# The default is typically /usr/ucb/rsh.
rsh-path=

# Sets the time in seconds that Pine will attempt to open a UNIX remote
# shell connection.  The default is 15, min is 5, and max is unlimited.
# Zero disables rsh altogether.
rsh-open-timeout=

# Sets the format of the command used to open a UNIX secure
# shell connection.  The default is "%s %s -l %s exec /etc/r%sd"
# NOTE: the 4 (four) "%s" entries MUST exist in the provided command
# where the first is for the command's path, the second is for the
# host to connect to, the third is for the user to connect as, and the
# fourth is for the connection method (typically "imap")
ssh-command=

# Sets the name of the command used to open a UNIX secure shell connection.
# Typically this is /usr/bin/ssh.
ssh-path=

# Sets the time in seconds that Pine will attempt to open a UNIX secure
# shell connection.  The default is 15, min is 5, and max is unlimited.
# Zero disables ssh altogether.
ssh-open-timeout=0

# Sets the version number Pine will use as a threshold for offering
# its new version message on startup.
new-version-threshold=

# List of mail drivers to disable.
disable-these-drivers=

# List of SASL authenticators to disable.
disable-these-authenticators=

# Set by Pine; contains data for caching remote address books.
remote-abook-metafile=.ab50848

# How many extra copies of remote address book should be kept. Default: 3
remote-abook-history=

# Minimum number of minutes between checks for remote address book changes.
# 0 means never check except when opening a remote address book.
# -1 means never check. Default: 5
remote-abook-validity=

# Your default printer selection
printer=

# List of special print commands
personal-print-command=

# Which category default print command is in
personal-print-category=

# Patterns and their actions are stored here.
patterns-roles=

# Patterns and their actions are stored here.
patterns-filters2=LIT:pattern="/NICK=arm-notebooks/FROM=arm-netbook-request@lists.phcomp.co.uk/FLDTYPE=SPEC/FOLDER=INBOX/STATD=NO" action="/FILTER=1/FOLDER={mail.robocracy.org\/ssl\/user=bnewbold\/novalidate-cert}INBOX.lists/NOKILL=1",
	LIT:pattern="/NICK=fnf-builders/ARBReply-To=builders@freenetworkfoundation.org/FLDTYPE=SPEC/FOLDER=INBOX/STATN=YES/STATR=YES/STATD=NO" action="/FILTER=1/FOLDER=lists/NOTDEL=1/NOKILL=1",
	LIT:pattern="/NICK=fnf-discuss/ARBReply-To=discuss@freenetworkfoundation.org/FLDTYPE=SPEC/FOLDER=INBOX/STATN=YES/STATR=YES/STATD=NO" action="/FILTER=1/FOLDER=lists/NOTDEL=1/NOKILL=1",
	LIT:pattern="/NICK=lispnyc/TO=lisp@lispnyc.org/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1/FOLDER={mail.robocracy.org\/ssl\/user=bnewbold\/novalidate-cert}INBOX.lists/NOKILL=1",
	LIT:pattern="/NICK=itp-phy-comp/ARBReply-To=phys-comp@lists.nyu.edu/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1/FOLDER=lists/NOKILL=1",
	LIT:pattern="/NICK=openitp/ARBList-Id=Circumvention Tools Developer List <dev.lists.openitp.org>/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1/FOLDER=lists/NOKILL=1",
	LIT:pattern="/NICK=nycresistor/FROM=nycresistormicrocontrollers@googlegroups.com/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1/FOLDER={mail.robocracy.org\/ssl\/user=bnewbold\/novalidate-cert}INBOX.lists/NOKILL=1",
	LIT:pattern="/NICK=freedombox/freedombox-discuss@lists.alioth.debian.org/FLDTYPE=SPEC/FOLDER=INBOX/STATN=YES/STATR=YES/STATD=NO" action="/FILTER=1/FOLDER=lists/NOTDEL=1/NOKILL=1",

# Patterns and their actions are stored here.
patterns-scores2=

# Patterns and their actions are stored here.
patterns-indexcolors=LIT:pattern="/NICK=important/FLDTYPE=EMAIL/STATI=YES" action="/ISINCOL=1/INCOL=\/FG=color011\/BG=black",
	LIT:pattern="/NICK=new/FLDTYPE=EMAIL/STATN=YES" action="/ISINCOL=1/INCOL=\/FG=color012\/BG=black",
	LIT:pattern="/NICK=replied/FLDTYPE=EMAIL/STATA=YES" action="/ISINCOL=1/INCOL=\/FG=color010\/BG=black",
	LIT:pattern="/NICK=deleted/FLDTYPE=EMAIL/STATD=YES" action="/ISINCOL=1/INCOL=\/FG=color009\/BG=black"

# Patterns and their actions are stored here.
patterns-other=

# Controls display of color
color-style=use-termdef

# Controls display of color for current index line
current-indexline-style=

# Controls display of color for the titlebar at top of screen
titlebar-color-style=

# Choose: black, blue, green, cyan, red, magenta, yellow, or white.
normal-foreground-color=color015
normal-background-color=black
reverse-foreground-color=
reverse-background-color=
title-foreground-color=
title-background-color=
status-foreground-color=
status-background-color=
keylabel-foreground-color=
keylabel-background-color=
keyname-foreground-color=
keyname-background-color=
selectable-item-foreground-color=
selectable-item-background-color=
quote1-foreground-color=
quote1-background-color=
quote2-foreground-color=
quote2-background-color=
quote3-foreground-color=
quote3-background-color=
signature-foreground-color=
signature-background-color=
prompt-foreground-color=
prompt-background-color=
index-to-me-foreground-color=
index-to-me-background-color=
index-important-foreground-color=color011
index-important-background-color=black
index-deleted-foreground-color=color009
index-deleted-background-color=black
index-answered-foreground-color=color010
index-answered-background-color=black
index-new-foreground-color=color012
index-new-background-color=black
index-recent-foreground-color=
index-recent-background-color=
index-unseen-foreground-color=
index-unseen-background-color=
index-arrow-foreground-color=
index-arrow-background-color=

# When viewing messages, these are the header colors
viewer-hdr-colors=

# Colors used to display keywords in the index
keyword-colors=

# Reflects capabilities of the display you have.
# If unset, the default is taken from your locale. That is usually the right
# thing to use. Typical alternatives include UTF-8, ISO-8859-x, and EUC-JP
# (where x is a number between 1 and 9).
display-character-set=

# Reflects capabilities of the keyboard you have.
# If unset, the default is to use the same value
# used for the display-character-set.
keyboard-character-set=

# Defaults to UTF-8. This is used for outgoing messages.
# It is usually correct to leave this unset.
posting-character-set=

# When these characters appear in the middle of a word in the composer
# the forward word function will stop at the first text following (as happens
# with SPACE characters by default)
composer-word-separators=

# Characters between subject and opening text in SUBJECTTEXT token.
# Default is " - "
opening-text-separator-chars=

# Number of times per-second to update busy cue messages
busy-cue-rate=

# Sets the time in seconds that Alpine will attempt to open a network
# connection when checking for new unseen messages in an incoming folder.
#  The default is 5.
incoming-check-timeout=

# Sets the approximate number of seconds between checks for unseen messages
# in incoming folders. The default is 180.
incoming-check-interval=

# Sets the approximate number of seconds between checks for unseen messages
# for other than local or IMAP folders. The default is 180.
incoming-check-interval-secondary=

# List of incoming folders to check for unseen messages. The default if left
# blank is to check all incoming folders.
incoming-check-list=

# Patterns and their actions are stored here.
patterns-search=
title-closed-foreground-color=
title-closed-background-color=
meta-message-foreground-color=
meta-message-background-color=
incoming-unseen-foreground-color=
incoming-unseen-background-color=
header-general-foreground-color=
header-general-background-color=
index-forward-foreground-color=
index-forward-background-color=
index-highpriority-foreground-color=
index-highpriority-background-color=
index-lowpriority-foreground-color=
index-lowpriority-background-color=
index-subject-foreground-color=
index-subject-background-color=
index-from-foreground-color=
index-from-background-color=
index-opening-foreground-color=
index-opening-background-color=

# LDAP servers for looking up addresses.

# WebAlpine index table row height
wp-indexheight=

# WebAlpine number of index lines in table
wp-indexlines=

# WebAlpine aggregate operations tab state
wp-aggstate=

# WebAlpine various aspects of cross-session state
wp-state=

# WebAlpine preferred width for message display in characters
wp-columns=

# If set, specifies where trash is moved to in Web Alpine.
trash-folder=

# Defaults to nothing, which is equivalent to US-ASCII. This is used for
# unlabeled incoming messages. It is ok to leave this unset but if you receive
# unlabeled mail that is usually in some known character set, set that here.
unknown-character-set=

# Location relative to your HOME directory of the directory where your INBOX
# for the maildir format is located. Default value is "Maildir". If your
# inbox is located at "~/Maildir" you do not need to change this value.
# A common value is also ".maildir"
maildir-location=

# Public certificates are kept in files in this directory. The files should
# contain certificates in PEM format. The name of each file should look
# like <emailaddress>.crt. The default directory is .alpine-smime/public.
smime-public-cert-directory=

# If this option is set then public certificates are kept in a single container
# "file" similar to a remote configuration file instead of in the
# smime-publiccert-directory. The value can be a remote or local folder
# specification like for a non-standard pinerc value. The default
# is that it is not set.
smime-public-cert-container=

# Private keys are kept in files in this directory. The files are in PEM format.
# The name of a file should look like <emailaddress>.key.
# The default directory is .alpine-smime/private.
smime-private-key-directory=

# If this option is set then private keys are kept in a single container
# "file" similar to a remote configuration file instead of in the
# private-key-directory. The value can be a remote or local folder
# specification like for a non-standard pinerc value. The default
# is that it is not set.
smime-private-key-container=

# Certificate Authority certificates (in addition to the normal CACerts for the
# system) are kept in files in this directory. The files are in PEM format.
# Filenames should end with .crt. The default directory is .alpine-smime/ca.
smime-cacert-directory=

# If this option is set then CAcerts are kept in a single container
# "file" similar to a remote configuration file instead of in the
# ca-cert-directory. The value can be a remote or local folder
# specification like for a non-standard pinerc value. The default
# is that it is not set.
smime-cacert-container=

# LDAP servers for looking up addresses.
ldap-servers=

# RSS News feed
rss-news=

# RSS Weather feed
rss-weather=

# Your login/e-mail user name
user-id=bnewbold