path: root/wirish/comm/HardwareSPI.cpp

/******************************************************************************
 * The MIT License
 *
 * Copyright (c) 2010 Perry Hung.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 *****************************************************************************/

/**
 * @author Marti Bolivar <mbolivar@leaflabs.com>
 * @brief Wirish SPI implementation.
 */

#include "HardwareSPI.h"

#include "timer.h"
#include "util.h"

#include "wirish.h"
#include "boards.h"

static void enable_device(spi_dev *dev,
                          bool as_master,
                          SPIFrequency frequency,
                          spi_cfg_flag endianness,
                          spi_mode mode);

/*
 * Constructor, public methods
 */

HardwareSPI::HardwareSPI(uint32 spi_num) {
    switch (spi_num) {
    case 1:
        this->spi_d = SPI1;
        break;
    case 2:
        this->spi_d = SPI2;
        break;
#ifdef STM32_HIGH_DENSITY
    case 3:
        this->spi_d = SPI3;
        break;
#endif
    default:
        ASSERT(0);
    }
}

void HardwareSPI::begin(SPIFrequency frequency, uint32 bitOrder, uint32 mode) {
    if (mode >= 4) {
        ASSERT(0);
        return;
    }
    spi_cfg_flag end = bitOrder == MSBFIRST ? SPI_FRAME_MSB : SPI_FRAME_LSB;
    spi_mode m = (spi_mode)mode;
    enable_device(this->spi_d, true, frequency, end, m);
}

void HardwareSPI::begin(void) {
    this->begin(SPI_1_125MHZ, MSBFIRST, 0);
}

void HardwareSPI::beginSlave(uint32 bitOrder, uint32 mode) {
    if (mode >= 4) {
        ASSERT(0);
        return;
    }
    spi_cfg_flag end = bitOrder == MSBFIRST ? SPI_FRAME_MSB : SPI_FRAME_LSB;
    spi_mode m = (spi_mode)mode;
    enable_device(this->spi_d, false, (SPIFrequency)0, end, m);
}

void HardwareSPI::beginSlave(void) {
    this->beginSlave(MSBFIRST, 0);
}

void HardwareSPI::end(void) {
    if (!spi_is_enabled(this->spi_d)) {
        return;
    }

    // Follows RM0008's sequence for disabling a SPI in master/slave
    // full duplex mode.
    while (spi_is_rx_nonempty(this->spi_d)) {
        // FIXME [0.1.0] remove this once you have an interrupt based driver
        volatile uint16 rx __attribute__((unused)) = spi_rx_reg(this->spi_d);
    }
    while (!spi_is_tx_empty(this->spi_d))
        ;
    while (spi_is_busy(this->spi_d))
        ;
    spi_peripheral_disable(this->spi_d);
}

uint8 HardwareSPI::read(void) {
    uint8 buf[1];
    this->read(buf, 1);
    return buf[0];
}

void HardwareSPI::read(uint8 *buf, uint32 len) {
    uint32 rxed = 0;
    while (rxed < len) {
        while (!spi_is_rx_nonempty(this->spi_d))
            ;
        buf[rxed++] = (uint8)spi_rx_reg(this->spi_d);
    }
}

void HardwareSPI::write(uint8 byte) {
    uint8 buf[] = {byte};
    this->write(buf, 1);
}

void HardwareSPI::write(uint8 *data, uint32 length) {
    uint32 txed = 0;
    while (txed < length) {
        txed += spi_tx(this->spi_d, data + txed, length - txed);
    }
}

uint8 HardwareSPI::transfer(uint8 byte) {
    this->write(byte);
    return this->read();
}

/*
 * Deprecated functions
 */

uint8 HardwareSPI::send(uint8 data) {
    uint8 buf[] = {data};
    return this->send(buf, 1);
}

uint8 HardwareSPI::send(uint8 *buf, uint32 len) {
    if (len == 0) {
        ASSERT(0);
        return 0;
    }
    uint32 txed = 0;
    uint8 ret = 0;              // shut up, GCC
    while (txed < len) {
        this->write(buf[txed++]);
        ret = this->read();
    }
    return ret;
}

uint8 HardwareSPI::recv(void) {
    return this->read();
}

/*
 * Auxiliary functions
 */

static void configure_gpios(spi_dev *dev, bool as_master);
static spi_baud_rate determine_baud_rate(spi_dev *dev, SPIFrequency freq);

/* Enables the device in master or slave full duplex mode.  If you
 * change this code, you must ensure that appropriate changes are made
 * to HardwareSPI::end(). */
static void enable_device(spi_dev *dev,
                          bool as_master,
                          SPIFrequency freq,
                          spi_cfg_flag endianness,
                          spi_mode mode) {
    if (freq >= MAX_SPI_FREQS) {
        ASSERT(0);
        return;
    }

    spi_baud_rate baud = determine_baud_rate(dev, freq);
    uint32 cfg_flags = (endianness | SPI_DFF_8_BIT | SPI_SW_SLAVE |
                        (as_master ? SPI_SOFT_SS : 0));

    spi_init(dev);
    configure_gpios(dev, as_master);
    if (as_master) {
        spi_master_enable(dev, baud, mode, cfg_flags);
    } else {
        spi_slave_enable(dev, mode, cfg_flags);
    }
}

static void disable_pwm(const stm32_pin_info *i) {
    if (i->timer_device) {
        timer_set_mode(i->timer_device, i->timer_channel, TIMER_DISABLED);
    }
}

typedef struct spi_pins {
    uint8 nss;
    uint8 sck;
    uint8 miso;
    uint8 mosi;
} spi_pins;

static void configure_gpios(spi_dev *dev, bool as_master) {
    const spi_pins spi_pin_config[] = {
        {BOARD_SPI1_NSS_PIN,
         BOARD_SPI1_SCK_PIN,
         BOARD_SPI1_MISO_PIN,
         BOARD_SPI1_MOSI_PIN},
        {BOARD_SPI2_NSS_PIN,
         BOARD_SPI2_SCK_PIN,
         BOARD_SPI2_MISO_PIN,
         BOARD_SPI2_MOSI_PIN},
#ifdef STM32_HIGH_DENSITY
        {BOARD_SPI3_NSS_PIN,
         BOARD_SPI3_SCK_PIN,
         BOARD_SPI3_MISO_PIN,
         BOARD_SPI3_MOSI_PIN},
#endif
    };

    const spi_pins *pins;

    switch (dev->clk_id) {
    case RCC_SPI1:
        pins = &spi_pin_config[0];
        break;
    case RCC_SPI2:
        pins = &spi_pin_config[1];
        break;
#ifdef STM32_HIGH_DENSITY
    case RCC_SPI3:
        pins = &spi_pin_config[2];
        break;
#endif
    default:
        ASSERT(0);
        return;
    }

    const stm32_pin_info *nssi = &PIN_MAP[pins->nss];
    const stm32_pin_info *scki = &PIN_MAP[pins->sck];
    const stm32_pin_info *misoi = &PIN_MAP[pins->miso];
    const stm32_pin_info *mosii = &PIN_MAP[pins->mosi];

    disable_pwm(nssi);
    disable_pwm(scki);
    disable_pwm(misoi);
    disable_pwm(mosii);

    if (as_master) {
        spi_master_gpio_cfg(nssi->gpio_device,
                            scki->gpio_device,
                            nssi->gpio_bit,
                            scki->gpio_bit,
                            misoi->gpio_bit,
                            mosii->gpio_bit);
    } else {
        spi_slave_gpio_cfg(nssi->gpio_device,
                           scki->gpio_device,
                           nssi->gpio_bit,
                           scki->gpio_bit,
                           misoi->gpio_bit,
                           mosii->gpio_bit);
    }
}

static const spi_baud_rate baud_rates[MAX_SPI_FREQS] __FLASH__ = {
    SPI_BAUD_PCLK_DIV_2,
    SPI_BAUD_PCLK_DIV_4,
    SPI_BAUD_PCLK_DIV_8,
    SPI_BAUD_PCLK_DIV_16,
    SPI_BAUD_PCLK_DIV_32,
    SPI_BAUD_PCLK_DIV_64,
    SPI_BAUD_PCLK_DIV_128,
    SPI_BAUD_PCLK_DIV_256,
};

/*
 * Note: This assumes you're on a LeafLabs-style board
 * (CYCLES_PER_MICROSECOND == 72, APB2 at 72MHz, APB1 at 36MHz).
 */
static spi_baud_rate determine_baud_rate(spi_dev *dev, SPIFrequency freq) {
    if (rcc_dev_clk(dev->clk_id) == RCC_APB2 && freq == SPI_140_625KHZ) {
        /* APB2 peripherals are too fast for 140.625 KHz */
        ASSERT(0);
        return (spi_baud_rate)~0;
    }
    return (rcc_dev_clk(dev->clk_id) == RCC_APB2 ?
            baud_rates[freq + 1] :
            baud_rates[freq]);
}