aboutsummaryrefslogtreecommitdiffstats
path: root/stm32lib/src/stm32f10x_tim.c
blob: ca971e288823ae1328d5bde18825a584e48427c6 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
2304
2305
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2336
2337
2338
2339
2340
2341
2342
2343
2344
2345
2346
2347
2348
2349
2350
2351
2352
2353
2354
2355
2356
2357
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
2371
2372
2373
2374
2375
2376
2377
2378
2379
2380
2381
2382
2383
2384
2385
2386
2387
2388
2389
2390
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2424
2425
2426
2427
2428
2429
2430
2431
2432
2433
2434
2435
2436
2437
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
2469
2470
2471
2472
2473
2474
2475
2476
2477
2478
2479
2480
2481
2482
2483
2484
2485
2486
2487
2488
2489
2490
2491
2492
2493
2494
2495
2496
2497
2498
2499
2500
2501
2502
2503
2504
2505
2506
2507
2508
2509
2510
2511
2512
2513
2514
2515
2516
2517
2518
2519
2520
2521
2522
2523
2524
2525
2526
2527
2528
2529
2530
2531
2532
2533
2534
2535
2536
2537
2538
2539
2540
2541
2542
2543
2544
2545
2546
2547
2548
2549
2550
2551
2552
2553
2554
2555
2556
2557
2558
2559
2560
2561
2562
2563
2564
2565
2566
2567
2568
2569
2570
2571
2572
2573
2574
2575
2576
2577
2578
2579
2580
2581
2582
2583
2584
2585
2586
2587
2588
2589
2590
2591
2592
2593
2594
2595
2596
2597
2598
2599
2600
2601
2602
2603
2604
2605
2606
2607
2608
2609
2610
2611
2612
2613
2614
2615
2616
2617
2618
2619
2620
2621
2622
2623
2624
2625
2626
2627
2628
2629
2630
2631
2632
2633
2634
2635
2636
2637
2638
2639
2640
2641
2642
2643
2644
2645
2646
2647
2648
2649
2650
2651
2652
2653
2654
2655
2656
2657
2658
2659
2660
2661
2662
2663
2664
2665
2666
2667
2668
2669
2670
2671
2672
2673
2674
2675
2676
2677
2678
2679
2680
2681
2682
2683
2684
2685
2686
2687
2688
2689
2690
2691
2692
2693
2694
2695
2696
2697
2698
2699
2700
2701
2702
2703
2704
2705
2706
2707
2708
2709
2710
2711
2712
2713
2714
2715
2716
2717
2718
2719
2720
2721
2722
2723
2724
2725
2726
2727
2728
2729
2730
2731
2732
2733
2734
2735
2736
2737
2738
2739
2740
2741
2742
2743
2744
2745
2746
2747
2748
2749
2750
2751
2752
2753
2754
2755
2756
2757
2758
2759
2760
2761
2762
2763
2764
2765
2766
2767
2768
2769
2770
2771
2772
2773
2774
2775
2776
2777
2778
2779
2780
2781
2782
2783
2784
2785
2786
2787
2788
2789
2790
2791
2792
2793
2794
2795
2796
2797
2798
2799
2800
2801
2802
2803
2804
2805
2806
2807
2808
2809
2810
2811
2812
2813
2814
2815
2816
2817
2818
2819
2820
2821
2822
2823
2824
2825
2826
2827
2828
2829
2830
2831
2832
2833
2834
2835
2836
2837
2838
2839
2840
2841
2842
2843
2844
2845
2846
2847
2848
2849
2850
2851
2852
2853
2854
2855
2856
2857
2858
2859
2860
2861
2862
2863
2864
2865
2866
2867
2868
2869
2870
2871
2872
2873
2874
2875
2876
2877
2878
2879
2880
2881
2882
2883
2884
2885
2886
2887
2888
2889
2890
2891
2892
2893
2894
2895
2896
2897
2898
2899
2900
2901
2902
2903
2904
2905
2906
2907
2908
2909
2910
2911
2912
2913
2914
2915
2916
2917
2918
2919
2920
2921
2922
2923
2924
2925
2926
2927
2928
2929
2930
2931
2932
2933
2934
2935
2936
2937
2938
2939
2940
2941
2942
2943
2944
2945
2946
2947
2948
2949
2950
2951
2952
2953
2954
2955
2956
2957
2958
2959
2960
2961
2962
2963
2964
2965
2966
2967
2968
2969
2970
2971
2972
2973
2974
2975
2976
2977
2978
2979
2980
2981
2982
2983
2984
2985
2986
2987
2988
2989
2990
2991
2992
2993
2994
2995
2996
2997
2998
2999
3000
3001
3002
3003
3004
3005
3006
3007
3008
3009
3010
3011
3012
3013
3014
3015
3016
3017
3018
3019
3020
3021
3022
3023
3024
3025
3026
3027
3028
3029
3030
3031
3032
3033
3034
3035
3036
3037
3038
3039
3040
3041
3042
3043
3044
3045
3046
3047
3048
3049
3050
3051
3052
3053
3054
3055
3056
3057
3058
3059
3060
3061
3062
3063
3064
3065
3066
3067
3068
3069
3070
3071
3072
3073
3074
3075
3076
3077
3078
3079
3080
3081
3082
3083
3084
3085
3086
3087
3088
3089
3090
3091
3092
3093
3094
3095
3096
3097
3098
3099
3100
3101
3102
3103
3104
3105
3106
3107
3108
3109
3110
3111
3112
3113
3114
3115
3116
3117
3118
3119
3120
3121
3122
3123
3124
3125
3126
3127
3128
3129
3130
3131
3132
3133
3134
3135
3136
3137
3138
3139
3140
3141
3142
3143
3144
3145
3146
3147
3148
3149
3150
3151
3152
3153
3154
3155
3156
3157
3158
3159
3160
3161
3162
3163
3164
3165
3166
3167
3168
3169
3170
3171
3172
3173
3174
3175
3176
3177
3178
3179
3180
3181
3182
3183
3184
3185
3186
3187
3188
3189
3190
3191
3192
3193
3194
3195
3196
3197
3198
3199
3200
3201
3202
3203
3204
3205
3206
3207
3208
3209
3210
3211
3212
3213
3214
3215
3216
3217
3218
3219
/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
* File Name          : stm32f10x_tim.c
* Author             : MCD Application Team
* Version            : V2.0.2
* Date               : 07/11/2008
* Description        : This file provides all the TIM firmware functions.
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_tim.h"
#include "stm32f10x_rcc.h"

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* ---------------------- TIM registers bit mask ------------------------ */
#define CR1_CEN_Set                 ((u16)0x0001)
#define CR1_CEN_Reset               ((u16)0x03FE)
#define CR1_UDIS_Set                ((u16)0x0002)
#define CR1_UDIS_Reset              ((u16)0x03FD)
#define CR1_URS_Set                 ((u16)0x0004)
#define CR1_URS_Reset               ((u16)0x03FB)
#define CR1_OPM_Reset               ((u16)0x03F7)
#define CR1_CounterMode_Mask        ((u16)0x038F)
#define CR1_ARPE_Set                ((u16)0x0080)
#define CR1_ARPE_Reset              ((u16)0x037F)
#define CR1_CKD_Mask                ((u16)0x00FF)

#define CR2_CCPC_Set                ((u16)0x0001)
#define CR2_CCPC_Reset              ((u16)0xFFFE)
#define CR2_CCUS_Set                ((u16)0x0004)
#define CR2_CCUS_Reset              ((u16)0xFFFB)
#define CR2_CCDS_Set                ((u16)0x0008)
#define CR2_CCDS_Reset              ((u16)0xFFF7)
#define CR2_MMS_Mask                ((u16)0xFF8F)
#define CR2_TI1S_Set                ((u16)0x0080)
#define CR2_TI1S_Reset              ((u16)0xFF7F)
#define CR2_OIS1_Reset              ((u16)0x7EFF)
#define CR2_OIS1N_Reset             ((u16)0x7DFF)
#define CR2_OIS2_Reset              ((u16)0x7BFF)
#define CR2_OIS2N_Reset             ((u16)0x77FF)
#define CR2_OIS3_Reset              ((u16)0x6FFF)
#define CR2_OIS3N_Reset             ((u16)0x5FFF)
#define CR2_OIS4_Reset              ((u16)0x3FFF)

#define SMCR_SMS_Mask               ((u16)0xFFF8)
#define SMCR_ETR_Mask               ((u16)0x00FF)
#define SMCR_TS_Mask                ((u16)0xFF8F)
#define SMCR_MSM_Reset              ((u16)0xFF7F)
#define SMCR_ECE_Set                ((u16)0x4000)

#define CCMR_CC13S_Mask             ((u16)0xFFFC)
#define CCMR_CC24S_Mask             ((u16)0xFCFF)
#define CCMR_TI13Direct_Set         ((u16)0x0001)
#define CCMR_TI24Direct_Set         ((u16)0x0100)
#define CCMR_OC13FE_Reset           ((u16)0xFFFB)
#define CCMR_OC24FE_Reset           ((u16)0xFBFF)
#define CCMR_OC13PE_Reset           ((u16)0xFFF7)
#define CCMR_OC24PE_Reset           ((u16)0xF7FF)
#define CCMR_OC13M_Mask             ((u16)0xFF8F)
#define CCMR_OC24M_Mask             ((u16)0x8FFF) 

#define CCMR_OC13CE_Reset           ((u16)0xFF7F)
#define CCMR_OC24CE_Reset           ((u16)0x7FFF)

#define CCMR_IC13PSC_Mask           ((u16)0xFFF3)
#define CCMR_IC24PSC_Mask           ((u16)0xF3FF)
#define CCMR_IC13F_Mask             ((u16)0xFF0F)
#define CCMR_IC24F_Mask             ((u16)0x0FFF)

#define CCMR_Offset                 ((u16)0x0018)
#define CCER_CCE_Set                ((u16)0x0001)
#define	CCER_CCNE_Set               ((u16)0x0004)

#define CCER_CC1P_Reset             ((u16)0xFFFD)
#define CCER_CC2P_Reset             ((u16)0xFFDF)
#define CCER_CC3P_Reset             ((u16)0xFDFF)
#define CCER_CC4P_Reset             ((u16)0xDFFF)

#define CCER_CC1NP_Reset            ((u16)0xFFF7)
#define CCER_CC2NP_Reset            ((u16)0xFF7F)
#define CCER_CC3NP_Reset            ((u16)0xF7FF)

#define CCER_CC1E_Set               ((u16)0x0001)
#define CCER_CC1E_Reset             ((u16)0xFFFE)

#define CCER_CC1NE_Reset            ((u16)0xFFFB)

#define CCER_CC2E_Set               ((u16)0x0010)
#define CCER_CC2E_Reset             ((u16)0xFFEF)

#define CCER_CC2NE_Reset            ((u16)0xFFBF)

#define CCER_CC3E_Set               ((u16)0x0100)
#define CCER_CC3E_Reset             ((u16)0xFEFF)

#define CCER_CC3NE_Reset            ((u16)0xFBFF)

#define CCER_CC4E_Set               ((u16)0x1000)
#define CCER_CC4E_Reset             ((u16)0xEFFF)

#define BDTR_MOE_Set                ((u16)0x8000)
#define BDTR_MOE_Reset              ((u16)0x7FFF)

/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
static void TI1_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection,
                       u16 TIM_ICFilter);
static void TI2_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection,
                       u16 TIM_ICFilter);
static void TI3_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection,
                       u16 TIM_ICFilter);
static void TI4_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection,
                       u16 TIM_ICFilter);
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name  : TIM_DeInit
* Description    : Deinitializes the TIMx peripheral registers to their default
*                  reset values.
* Input          : - TIMx: where x can be 1 to 8 to select the TIM peripheral.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_DeInit(TIM_TypeDef* TIMx)
{
  /* Check the parameters */
  assert_param(IS_TIM_ALL_PERIPH(TIMx)); 
 
  switch (*(u32*)&TIMx)
  {
    case TIM1_BASE:
      RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE);
      RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE);  
      break; 
      
    case TIM2_BASE:
      RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE);
      RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE);
      break;
 
    case TIM3_BASE:
      RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE);
      RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE);
      break;
 
    case TIM4_BASE:
      RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE);
      RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE);
      break;
      
    case TIM5_BASE:
      RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE);
      RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE);
      break;
      
    case TIM6_BASE:
      RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE);
      RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE);
      break;
      
    case TIM7_BASE:
      RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE);
      RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE);
      break;
      
    case TIM8_BASE:
      RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE);
      RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE);  
      break; 
      
    default:
      break;
  }
}

/*******************************************************************************
* Function Name  : TIM_TimeBaseInit
* Description    : Initializes the TIMx Time Base Unit peripheral according to 
*                  the specified parameters in the TIM_TimeBaseInitStruct.
* Input          : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef
*                   structure that contains the configuration information for
*                   the specified TIM peripheral.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx)); 
  assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode));
  assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision));

  /* Select the Counter Mode and set the clock division */
  TIMx->CR1 &= CR1_CKD_Mask & CR1_CounterMode_Mask;
  TIMx->CR1 |= (u32)TIM_TimeBaseInitStruct->TIM_ClockDivision |
                TIM_TimeBaseInitStruct->TIM_CounterMode;
  /* Set the Autoreload value */
  TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ;

  /* Set the Prescaler value */
  TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler;

  /* Generate an update event to reload the Prescaler value immediatly */
  TIMx->EGR = TIM_PSCReloadMode_Immediate;
    
  if (((*(u32*)&TIMx) == TIM1_BASE) || ((*(u32*)&TIMx) == TIM8_BASE))  
  {
    /* Set the Repetition Counter value */
    TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter;
  }        
}

/*******************************************************************************
* Function Name  : TIM_OC1Init
* Description    : Initializes the TIMx Channel1 according to the specified
*                  parameters in the TIM_OCInitStruct.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
*                    that contains the configuration information for the specified
*                    TIM peripheral.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
{
  u16 tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
   
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx)); 
  assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
  assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
  assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));   

  /* Disable the Channel 1: Reset the CC1E Bit */
  TIMx->CCER &= CCER_CC1E_Reset;
  
  /* Get the TIMx CCER register value */
  tmpccer = TIMx->CCER;

  /* Get the TIMx CR2 register value */
  tmpcr2 =  TIMx->CR2;
  
  /* Get the TIMx CCMR1 register value */
  tmpccmrx = TIMx->CCMR1;
    
  /* Reset the Output Compare Mode Bits */
  tmpccmrx &= CCMR_OC13M_Mask;
  
  /* Select the Output Compare Mode */
  tmpccmrx |= TIM_OCInitStruct->TIM_OCMode;
  
  /* Reset the Output Polarity level */
  tmpccer &= CCER_CC1P_Reset;

  /* Set the Output Compare Polarity */
  tmpccer |= TIM_OCInitStruct->TIM_OCPolarity;
  
  /* Set the Output State */
  tmpccer |= TIM_OCInitStruct->TIM_OutputState;
  
  /* Set the Capture Compare Register value */
  TIMx->CCR1 = TIM_OCInitStruct->TIM_Pulse;
  
  if((*(u32*)&TIMx == TIM1_BASE) || (*(u32*)&TIMx == TIM8_BASE))
  {
    assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState));
    assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity));
    assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState));
    assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
    
    /* Reset the Output N Polarity level */
    tmpccer &= CCER_CC1NP_Reset;

    /* Set the Output N Polarity */
    tmpccer |= TIM_OCInitStruct->TIM_OCNPolarity;

    /* Reset the Output N State */
    tmpccer &= CCER_CC1NE_Reset;
    
    /* Set the Output N State */
    tmpccer |= TIM_OCInitStruct->TIM_OutputNState;

    /* Reset the Ouput Compare and Output Compare N IDLE State */
    tmpcr2 &= CR2_OIS1_Reset;
    tmpcr2 &= CR2_OIS1N_Reset;

    /* Set the Output Idle state */
    tmpcr2 |= TIM_OCInitStruct->TIM_OCIdleState;

    /* Set the Output N Idle state */
    tmpcr2 |= TIM_OCInitStruct->TIM_OCNIdleState;
  }
  /* Write to TIMx CR2 */
  TIMx->CR2 = tmpcr2;
  
  /* Write to TIMx CCMR1 */
  TIMx->CCMR1 = tmpccmrx;
  
  /* Write to TIMx CCER */
  TIMx->CCER = tmpccer;
}

/*******************************************************************************
* Function Name  : TIM_OC2Init
* Description    : Initializes the TIMx Channel2 according to the specified
*                  parameters in the TIM_OCInitStruct.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
*                    that contains the configuration information for the specified
*                    TIM peripheral.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
{
  u16 tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
   
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx)); 
  assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
  assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
  assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));   

  /* Disable the Channel 2: Reset the CC2E Bit */
  TIMx->CCER &= CCER_CC2E_Reset;
  
  /* Get the TIMx CCER register value */  
  tmpccer = TIMx->CCER;

  /* Get the TIMx CR2 register value */
  tmpcr2 =  TIMx->CR2;
  
  /* Get the TIMx CCMR1 register value */
  tmpccmrx = TIMx->CCMR1;
    
  /* Reset the Output Compare Mode Bits */
  tmpccmrx &= CCMR_OC24M_Mask;
  
  /* Select the Output Compare Mode */
  tmpccmrx |= (u16)(TIM_OCInitStruct->TIM_OCMode << 8);
  
  /* Reset the Output Polarity level */
  tmpccer &= CCER_CC2P_Reset;

  /* Set the Output Compare Polarity */
  tmpccer |= (u16)(TIM_OCInitStruct->TIM_OCPolarity << 4);
  
  /* Set the Output State */
  tmpccer |= (u16)(TIM_OCInitStruct->TIM_OutputState << 4);
  
  /* Set the Capture Compare Register value */
  TIMx->CCR2 = TIM_OCInitStruct->TIM_Pulse;
  
  if((*(u32*)&TIMx == TIM1_BASE) || (*(u32*)&TIMx == TIM8_BASE))
  {
    assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState));
    assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity));
    assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState));
    assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
    
    /* Reset the Output N Polarity level */
    tmpccer &= CCER_CC2NP_Reset;

    /* Set the Output N Polarity */
    tmpccer |= (u16)(TIM_OCInitStruct->TIM_OCNPolarity << 4);

    /* Reset the Output N State */
    tmpccer &= CCER_CC2NE_Reset;
    
    /* Set the Output N State */
    tmpccer |= (u16)(TIM_OCInitStruct->TIM_OutputNState << 4);

    /* Reset the Ouput Compare and Output Compare N IDLE State */
    tmpcr2 &= CR2_OIS2_Reset;
    tmpcr2 &= CR2_OIS2N_Reset;

    /* Set the Output Idle state */
    tmpcr2 |= (u16)(TIM_OCInitStruct->TIM_OCIdleState << 2);

    /* Set the Output N Idle state */
    tmpcr2 |= (u16)(TIM_OCInitStruct->TIM_OCNIdleState << 2);
  }

  /* Write to TIMx CR2 */
  TIMx->CR2 = tmpcr2;
  
  /* Write to TIMx CCMR1 */
  TIMx->CCMR1 = tmpccmrx;
  
  /* Write to TIMx CCER */
  TIMx->CCER = tmpccer;
}

/*******************************************************************************
* Function Name  : TIM_OC3Init
* Description    : Initializes the TIMx Channel3 according to the specified
*                  parameters in the TIM_OCInitStruct.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
*                    that contains the configuration information for the specified
*                    TIM peripheral.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
{
  u16 tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
   
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx)); 
  assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
  assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
  assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));   

  /* Disable the Channel 2: Reset the CC2E Bit */
  TIMx->CCER &= CCER_CC3E_Reset;
  
  /* Get the TIMx CCER register value */
  tmpccer = TIMx->CCER;

  /* Get the TIMx CR2 register value */
  tmpcr2 =  TIMx->CR2;
  
  /* Get the TIMx CCMR2 register value */
  tmpccmrx = TIMx->CCMR2;
    
  /* Reset the Output Compare Mode Bits */
  tmpccmrx &= CCMR_OC13M_Mask;
  
  /* Select the Output Compare Mode */
  tmpccmrx |= TIM_OCInitStruct->TIM_OCMode;
  
  /* Reset the Output Polarity level */
  tmpccer &= CCER_CC3P_Reset;

  /* Set the Output Compare Polarity */
  tmpccer |= (u16)(TIM_OCInitStruct->TIM_OCPolarity << 8);
  
  /* Set the Output State */
  tmpccer |= (u16)(TIM_OCInitStruct->TIM_OutputState << 8);
  
  /* Set the Capture Compare Register value */
  TIMx->CCR3 = TIM_OCInitStruct->TIM_Pulse;
  
  if((*(u32*)&TIMx == TIM1_BASE) || (*(u32*)&TIMx == TIM8_BASE))
  {
    assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState));
    assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity));
    assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState));
    assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
    
    /* Reset the Output N Polarity level */
    tmpccer &= CCER_CC3NP_Reset;

    /* Set the Output N Polarity */
    tmpccer |= (u16)(TIM_OCInitStruct->TIM_OCNPolarity << 8);

    /* Reset the Output N State */
    tmpccer &= CCER_CC3NE_Reset;
    
    /* Set the Output N State */
    tmpccer |= (u16)(TIM_OCInitStruct->TIM_OutputNState << 8);

    /* Reset the Ouput Compare and Output Compare N IDLE State */
    tmpcr2 &= CR2_OIS3_Reset;
    tmpcr2 &= CR2_OIS3N_Reset;

    /* Set the Output Idle state */
    tmpcr2 |= (u16)(TIM_OCInitStruct->TIM_OCIdleState << 4);

    /* Set the Output N Idle state */
    tmpcr2 |= (u16)(TIM_OCInitStruct->TIM_OCNIdleState << 4);
  }

  /* Write to TIMx CR2 */
  TIMx->CR2 = tmpcr2;
  
  /* Write to TIMx CCMR2 */
  TIMx->CCMR2 = tmpccmrx;
  
  /* Write to TIMx CCER */
  TIMx->CCER = tmpccer;
}

/*******************************************************************************
* Function Name  : TIM_OC4Init
* Description    : Initializes the TIMx Channel4 according to the specified
*                  parameters in the TIM_OCInitStruct.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
*                    that contains the configuration information for the specified
*                    TIM peripheral.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
{
  u16 tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
   
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx)); 
  assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
  assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
  assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));   

  /* Disable the Channel 2: Reset the CC4E Bit */
  TIMx->CCER &= CCER_CC4E_Reset;
  
  /* Get the TIMx CCER register value */
  tmpccer = TIMx->CCER;

  /* Get the TIMx CR2 register value */
  tmpcr2 =  TIMx->CR2;
  
  /* Get the TIMx CCMR2 register value */
  tmpccmrx = TIMx->CCMR2;
    
  /* Reset the Output Compare Mode Bits */
  tmpccmrx &= CCMR_OC24M_Mask;
  
  /* Select the Output Compare Mode */
  tmpccmrx |= (u16)(TIM_OCInitStruct->TIM_OCMode << 8);
  
  /* Reset the Output Polarity level */
  tmpccer &= CCER_CC4P_Reset;

  /* Set the Output Compare Polarity */
  tmpccer |= (u16)(TIM_OCInitStruct->TIM_OCPolarity << 12);
  
  /* Set the Output State */
  tmpccer |= (u16)(TIM_OCInitStruct->TIM_OutputState << 12);
  
  /* Set the Capture Compare Register value */
  TIMx->CCR4 = TIM_OCInitStruct->TIM_Pulse;
  
  if((*(u32*)&TIMx == TIM1_BASE) || (*(u32*)&TIMx == TIM8_BASE))
  {
    assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));

    /* Reset the Ouput Compare IDLE State */
    tmpcr2 &= CR2_OIS4_Reset;

    /* Set the Output Idle state */
    tmpcr2 |= (u16)(TIM_OCInitStruct->TIM_OCIdleState << 6);
  }

  /* Write to TIMx CR2 */
  TIMx->CR2 = tmpcr2;
  
  /* Write to TIMx CCMR2 */  
  TIMx->CCMR2 = tmpccmrx;
  
  /* Write to TIMx CCER */
  TIMx->CCER = tmpccer;
}

/*******************************************************************************
* Function Name  : TIM_ICInit
* Description    : Initializes the TIM peripheral according to the specified
*                  parameters in the TIM_ICInitStruct.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure
*                    that contains the configuration information for the specified
*                    TIM peripheral.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_CHANNEL(TIM_ICInitStruct->TIM_Channel));
  assert_param(IS_TIM_IC_POLARITY(TIM_ICInitStruct->TIM_ICPolarity));
  assert_param(IS_TIM_IC_SELECTION(TIM_ICInitStruct->TIM_ICSelection));
  assert_param(IS_TIM_IC_PRESCALER(TIM_ICInitStruct->TIM_ICPrescaler));
  assert_param(IS_TIM_IC_FILTER(TIM_ICInitStruct->TIM_ICFilter));
  
  if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1)
  {
    /* TI1 Configuration */
    TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
               TIM_ICInitStruct->TIM_ICSelection,
               TIM_ICInitStruct->TIM_ICFilter);

    /* Set the Input Capture Prescaler value */
    TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
  }
  else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_2)
  {
    /* TI2 Configuration */
    TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
               TIM_ICInitStruct->TIM_ICSelection,
               TIM_ICInitStruct->TIM_ICFilter);

    /* Set the Input Capture Prescaler value */
    TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
  }
  else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_3)
  {
    /* TI3 Configuration */
    TI3_Config(TIMx,  TIM_ICInitStruct->TIM_ICPolarity,
               TIM_ICInitStruct->TIM_ICSelection,
               TIM_ICInitStruct->TIM_ICFilter);

    /* Set the Input Capture Prescaler value */
    TIM_SetIC3Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
  }
  else
  {
    /* TI4 Configuration */
    TI4_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
               TIM_ICInitStruct->TIM_ICSelection,
               TIM_ICInitStruct->TIM_ICFilter);

    /* Set the Input Capture Prescaler value */
    TIM_SetIC4Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
  }
}

/*******************************************************************************
* Function Name  : TIM_PWMIConfig
* Description    : Configures the TIM peripheral according to the specified
*                  parameters in the TIM_ICInitStruct to measure an external PWM
*                  signal.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure
*                    that contains the configuration information for the specified
*                    TIM peripheral.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct)
{
  u16 icoppositepolarity = TIM_ICPolarity_Rising;
  u16 icoppositeselection = TIM_ICSelection_DirectTI;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));

  /* Select the Opposite Input Polarity */
  if (TIM_ICInitStruct->TIM_ICPolarity == TIM_ICPolarity_Rising)
  {
    icoppositepolarity = TIM_ICPolarity_Falling;
  }
  else
  {
    icoppositepolarity = TIM_ICPolarity_Rising;
  }

  /* Select the Opposite Input */
  if (TIM_ICInitStruct->TIM_ICSelection == TIM_ICSelection_DirectTI)
  {
    icoppositeselection = TIM_ICSelection_IndirectTI;
  }
  else
  {
    icoppositeselection = TIM_ICSelection_DirectTI;
  }

  if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1)
  {
    /* TI1 Configuration */
    TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection,
               TIM_ICInitStruct->TIM_ICFilter);

    /* Set the Input Capture Prescaler value */
    TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);

    /* TI2 Configuration */
    TI2_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter);

    /* Set the Input Capture Prescaler value */
    TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
  }
  else
  { 
    /* TI2 Configuration */
    TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection,
               TIM_ICInitStruct->TIM_ICFilter);

    /* Set the Input Capture Prescaler value */
    TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);

    /* TI1 Configuration */
    TI1_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter);

    /* Set the Input Capture Prescaler value */
    TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
  }
}

/*******************************************************************************
* Function Name  : TIM_BDTRConfig
* Description    : Configures the: Break feature, dead time, Lock level, the OSSI,
*                  the OSSR State and the AOE(automatic output enable).
* Input          :- TIMx: where x can be  1 or 8 to select the TIM 
*                 - TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef
*                    structure that contains the BDTR Register configuration
*                    information for the TIM peripheral.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct)
{
  /* Check the parameters */
  assert_param(IS_TIM_18_PERIPH(TIMx));
  assert_param(IS_TIM_OSSR_STATE(TIM_BDTRInitStruct->TIM_OSSRState));
  assert_param(IS_TIM_OSSI_STATE(TIM_BDTRInitStruct->TIM_OSSIState));
  assert_param(IS_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->TIM_LOCKLevel));
  assert_param(IS_TIM_BREAK_STATE(TIM_BDTRInitStruct->TIM_Break));
  assert_param(IS_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->TIM_BreakPolarity));
  assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->TIM_AutomaticOutput));

  /* Set the Lock level, the Break enable Bit and the Ploarity, the OSSR State,
     the OSSI State, the dead time value and the Automatic Output Enable Bit */

  TIMx->BDTR = (u32)TIM_BDTRInitStruct->TIM_OSSRState | TIM_BDTRInitStruct->TIM_OSSIState |
             TIM_BDTRInitStruct->TIM_LOCKLevel | TIM_BDTRInitStruct->TIM_DeadTime |
             TIM_BDTRInitStruct->TIM_Break | TIM_BDTRInitStruct->TIM_BreakPolarity |
             TIM_BDTRInitStruct->TIM_AutomaticOutput;

}

/*******************************************************************************
* Function Name  : TIM_TimeBaseStructInit
* Description    : Fills each TIM_TimeBaseInitStruct member with its default value.
* Input          : - TIM_TimeBaseInitStruct : pointer to a TIM_TimeBaseInitTypeDef
*                    structure which will be initialized.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct)
{
  /* Set the default configuration */
  TIM_TimeBaseInitStruct->TIM_Period = 0xFFFF;
  TIM_TimeBaseInitStruct->TIM_Prescaler = 0x0000;
  TIM_TimeBaseInitStruct->TIM_ClockDivision = TIM_CKD_DIV1;
  TIM_TimeBaseInitStruct->TIM_CounterMode = TIM_CounterMode_Up;
  TIM_TimeBaseInitStruct->TIM_RepetitionCounter = 0x0000;
}

/*******************************************************************************
* Function Name  : TIM_OCStructInit
* Description    : Fills each TIM_OCInitStruct member with its default value.
* Input          : - TIM_OCInitStruct : pointer to a TIM_OCInitTypeDef structure
*                    which will be initialized.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct)
{
  /* Set the default configuration */
  TIM_OCInitStruct->TIM_OCMode = TIM_OCMode_Timing;
  TIM_OCInitStruct->TIM_OutputState = TIM_OutputState_Disable;
  TIM_OCInitStruct->TIM_OutputNState = TIM_OutputNState_Disable;
  TIM_OCInitStruct->TIM_Pulse = 0x0000;
  TIM_OCInitStruct->TIM_OCPolarity = TIM_OCPolarity_High;
  TIM_OCInitStruct->TIM_OCNPolarity = TIM_OCPolarity_High;
  TIM_OCInitStruct->TIM_OCIdleState = TIM_OCIdleState_Reset;
  TIM_OCInitStruct->TIM_OCNIdleState = TIM_OCNIdleState_Reset;
}

/*******************************************************************************
* Function Name  : TIM_ICStructInit
* Description    : Fills each TIM_ICInitStruct member with its default value.
* Input          : - TIM_ICInitStruct : pointer to a TIM_ICInitTypeDef structure
*                    which will be initialized.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct)
{
  /* Set the default configuration */
  TIM_ICInitStruct->TIM_Channel = TIM_Channel_1;
  TIM_ICInitStruct->TIM_ICPolarity = TIM_ICPolarity_Rising;
  TIM_ICInitStruct->TIM_ICSelection = TIM_ICSelection_DirectTI;
  TIM_ICInitStruct->TIM_ICPrescaler = TIM_ICPSC_DIV1;
  TIM_ICInitStruct->TIM_ICFilter = 0x00;
}

/*******************************************************************************
* Function Name  : TIM_BDTRStructInit
* Description    : Fills each TIM_BDTRInitStruct member with its default value.
* Input          : - TIM_BDTRInitStruct : pointer to a TIM_BDTRInitTypeDef
*                    structure which will be initialized.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct)
{
  /* Set the default configuration */
  TIM_BDTRInitStruct->TIM_OSSRState = TIM_OSSRState_Disable;
  TIM_BDTRInitStruct->TIM_OSSIState = TIM_OSSIState_Disable;
  TIM_BDTRInitStruct->TIM_LOCKLevel = TIM_LOCKLevel_OFF;
  TIM_BDTRInitStruct->TIM_DeadTime = 0x00;
  TIM_BDTRInitStruct->TIM_Break = TIM_Break_Disable;
  TIM_BDTRInitStruct->TIM_BreakPolarity = TIM_BreakPolarity_Low;
  TIM_BDTRInitStruct->TIM_AutomaticOutput = TIM_AutomaticOutput_Disable;
}

/*******************************************************************************
* Function Name  : TIM_Cmd
* Description    : Enables or disables the specified TIM peripheral.
* Input          : - TIMx: where x can be 1 to 8 to select the TIMx peripheral.
*                  - NewState: new state of the TIMx peripheral.
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_TIM_ALL_PERIPH(TIMx));
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  
  if (NewState != DISABLE)
  {
    /* Enable the TIM Counter */
    TIMx->CR1 |= CR1_CEN_Set;
  }
  else
  {
    /* Disable the TIM Counter */
    TIMx->CR1 &= CR1_CEN_Reset;
  }
}

/*******************************************************************************
* Function Name  : TIM_CtrlPWMOutputs
* Description    : Enables or disables the TIM peripheral Main Outputs.
* Input          :- TIMx: where x can be 1 or 8 to select the TIMx peripheral.
*                 - NewState: new state of the TIM peripheral Main Outputs.
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_TIM_18_PERIPH(TIMx));
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if (NewState != DISABLE)
  {
    /* Enable the TIM Main Output */
    TIMx->BDTR |= BDTR_MOE_Set;
  }
  else
  {
    /* Disable the TIM Main Output */
    TIMx->BDTR &= BDTR_MOE_Reset;
  }  
}

/*******************************************************************************
* Function Name  : TIM_ITConfig
* Description    : Enables or disables the specified TIM interrupts.
* Input          : - TIMx: where x can be 1 to 8 to select the TIMx peripheral.
*                  - TIM_IT: specifies the TIM interrupts sources to be enabled
*                    or disabled.
*                    This parameter can be any combination of the following values:
*                       - TIM_IT_Update: TIM update Interrupt source
*                       - TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
*                       - TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
*                       - TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
*                       - TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
*                       - TIM_IT_COM: TIM Commutation Interrupt source
*                       - TIM_IT_Trigger: TIM Trigger Interrupt source
*                       - TIM_IT_Break: TIM Break Interrupt source
*                  - NewState: new state of the TIM interrupts.
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_ITConfig(TIM_TypeDef* TIMx, u16 TIM_IT, FunctionalState NewState)
{  
  /* Check the parameters */
  assert_param(IS_TIM_ALL_PERIPH(TIMx));
  assert_param(IS_TIM_IT(TIM_IT));
  assert_param(IS_TIM_PERIPH_IT((TIMx), (TIM_IT)));
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  
  if (NewState != DISABLE)
  {
    /* Enable the Interrupt sources */
    TIMx->DIER |= TIM_IT;
  }
  else
  {
    /* Disable the Interrupt sources */
    TIMx->DIER &= (u16)~TIM_IT;
  }
}

/*******************************************************************************
* Function Name  : TIM_GenerateEvent
* Description    : Configures the TIMx event to be generate by software.
* Input          : - TIMx: where x can be 1 to 8 to select the TIM peripheral.
*                  - TIM_EventSource: specifies the event source.
*                    This parameter can be one or more of the following values:	   
*                       - TIM_EventSource_Update: Timer update Event source
*                       - TIM_EventSource_CC1: Timer Capture Compare 1 Event source
*                       - TIM_EventSource_CC2: Timer Capture Compare 2 Event source
*                       - TIM_EventSource_CC3: Timer Capture Compare 3 Event source
*                       - TIM_EventSource_CC4: Timer Capture Compare 4 Event source
*                       - TIM_EventSource_Trigger: Timer Trigger Event source
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_GenerateEvent(TIM_TypeDef* TIMx, u16 TIM_EventSource)
{ 
  /* Check the parameters */
  assert_param(IS_TIM_ALL_PERIPH(TIMx));
  assert_param(IS_TIM_EVENT_SOURCE(TIM_EventSource));
  assert_param(IS_TIM_PERIPH_EVENT((TIMx), (TIM_EventSource)));

  /* Set the event sources */
  TIMx->EGR = TIM_EventSource;
}

/*******************************************************************************
* Function Name  : TIM_DMAConfig
* Description    : Configures the TIMx’s DMA interface.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_DMABase: DMA Base address.
*                    This parameter can be one of the following values:
*                       - TIM_DMABase_CR, TIM_DMABase_CR2, TIM_DMABase_SMCR,
*                         TIM_DMABase_DIER, TIM1_DMABase_SR, TIM_DMABase_EGR,
*                         TIM_DMABase_CCMR1, TIM_DMABase_CCMR2, TIM_DMABase_CCER,
*                         TIM_DMABase_CNT, TIM_DMABase_PSC, TIM_DMABase_ARR,
*                         TIM_DMABase_RCR, TIM_DMABase_CCR1, TIM_DMABase_CCR2,
*                         TIM_DMABase_CCR3, TIM_DMABase_CCR4, TIM_DMABase_BDTR,
*                         TIM_DMABase_DCR.
*                   - TIM_DMABurstLength: DMA Burst length.
*                     This parameter can be one value between:
*                     TIM_DMABurstLength_1Byte and TIM_DMABurstLength_18Bytes.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_DMAConfig(TIM_TypeDef* TIMx, u16 TIM_DMABase, u16 TIM_DMABurstLength)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_DMA_BASE(TIM_DMABase));
  assert_param(IS_TIM_DMA_LENGTH(TIM_DMABurstLength));

  /* Set the DMA Base and the DMA Burst Length */
  TIMx->DCR = TIM_DMABase | TIM_DMABurstLength;
}

/*******************************************************************************
* Function Name  : TIM_DMACmd
* Description    : Enables or disables the TIMx’s DMA Requests.
* Input          : - TIMx: where x can be  1 to 8 to select the TIM peripheral. 
*                  - TIM_DMASources: specifies the DMA Request sources.
*                    This parameter can be any combination of the following values:
*                       - TIM_DMA_Update: TIM update Interrupt source
*                       - TIM_DMA_CC1: TIM Capture Compare 1 DMA source
*                       - TIM_DMA_CC2: TIM Capture Compare 2 DMA source
*                       - TIM_DMA_CC3: TIM Capture Compare 3 DMA source
*                       - TIM_DMA_CC4: TIM Capture Compare 4 DMA source
*                       - TIM_DMA_COM: TIM Commutation DMA source
*                       - TIM_DMA_Trigger: TIM Trigger DMA source
*                  - NewState: new state of the DMA Request sources.
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_DMACmd(TIM_TypeDef* TIMx, u16 TIM_DMASource, FunctionalState NewState)
{ 
  /* Check the parameters */
  assert_param(IS_TIM_ALL_PERIPH(TIMx));
  assert_param(IS_TIM_DMA_SOURCE(TIM_DMASource));
  assert_param(IS_TIM_PERIPH_DMA(TIMx, TIM_DMASource));
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  
  if (NewState != DISABLE)
  {
    /* Enable the DMA sources */
    TIMx->DIER |= TIM_DMASource; 
  }
  else
  {
    /* Disable the DMA sources */
    TIMx->DIER &= (u16)~TIM_DMASource;
  }
}

/*******************************************************************************
* Function Name  : TIM_InternalClockConfig
* Description    : Configures the TIMx interrnal Clock
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_InternalClockConfig(TIM_TypeDef* TIMx)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));

  /* Disable slave mode to clock the prescaler directly with the internal clock */
  TIMx->SMCR &=  SMCR_SMS_Mask;
}
/*******************************************************************************
* Function Name  : TIM_ITRxExternalClockConfig
* Description    : Configures the TIMx Internal Trigger as External Clock
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_ITRSource: Trigger source.
*                    This parameter can be one of the following values:
*                       - TIM_TS_ITR0: Internal Trigger 0
*                       - TIM_TS_ITR1: Internal Trigger 1
*                       - TIM_TS_ITR2: Internal Trigger 2
*                       - TIM_TS_ITR3: Internal Trigger 3
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, u16 TIM_InputTriggerSource)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_INTERNAL_TRIGGER_SELECTION(TIM_InputTriggerSource));

  /* Select the Internal Trigger */
  TIM_SelectInputTrigger(TIMx, TIM_InputTriggerSource);

  /* Select the External clock mode1 */
  TIMx->SMCR |= TIM_SlaveMode_External1;
}
/*******************************************************************************
* Function Name  : TIM_TIxExternalClockConfig
* Description    : Configures the TIMx Trigger as External Clock
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_TIxExternalCLKSource: Trigger source.
*                    This parameter can be one of the following values:
*                       - TIM_TIxExternalCLK1Source_TI1ED: TI1 Edge Detector
*                       - TIM_TIxExternalCLK1Source_TI1: Filtered Timer Input 1
*                       - TIM_TIxExternalCLK1Source_TI2: Filtered Timer Input 2
*                  - TIM_ICPolarity: specifies the TIx Polarity.
*                    This parameter can be:
*                       - TIM_ICPolarity_Rising
*                       - TIM_ICPolarity_Falling
*                   - ICFilter : specifies the filter value.
*                     This parameter must be a value between 0x0 and 0xF.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, u16 TIM_TIxExternalCLKSource,
                                u16 TIM_ICPolarity, u16 ICFilter)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_TIXCLK_SOURCE(TIM_TIxExternalCLKSource));
  assert_param(IS_TIM_IC_POLARITY(TIM_ICPolarity));
  assert_param(IS_TIM_IC_FILTER(ICFilter));

  /* Configure the Timer Input Clock Source */
  if (TIM_TIxExternalCLKSource == TIM_TIxExternalCLK1Source_TI2)
  {
    TI2_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter);
  }
  else
  {
    TI1_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter);
  }

  /* Select the Trigger source */
  TIM_SelectInputTrigger(TIMx, TIM_TIxExternalCLKSource);

  /* Select the External clock mode1 */
  TIMx->SMCR |= TIM_SlaveMode_External1;
}

/*******************************************************************************
* Function Name  : TIM_ETRClockMode1Config
* Description    : Configures the External clock Mode1
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_ExtTRGPrescaler: The external Trigger Prescaler.
*                    It can be one of the following values:
*                       - TIM_ExtTRGPSC_OFF
*                       - TIM_ExtTRGPSC_DIV2
*                       - TIM_ExtTRGPSC_DIV4
*                       - TIM_ExtTRGPSC_DIV8.
*                  - TIM_ExtTRGPolarity: The external Trigger Polarity.
*                    It can be one of the following values:
*                       - TIM_ExtTRGPolarity_Inverted
*                       - TIM_ExtTRGPolarity_NonInverted
*                  - ExtTRGFilter: External Trigger Filter.
*                    This parameter must be a value between 0x00 and 0x0F
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, u16 TIM_ExtTRGPrescaler, u16 TIM_ExtTRGPolarity,
                             u16 ExtTRGFilter)
{
  u16 tmpsmcr = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler));
  assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity));
  assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter));

  /* Configure the ETR Clock source */
  TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter);
  
  /* Get the TIMx SMCR register value */
  tmpsmcr = TIMx->SMCR;

  /* Reset the SMS Bits */
  tmpsmcr &= SMCR_SMS_Mask;
  /* Select the External clock mode1 */
  tmpsmcr |= TIM_SlaveMode_External1;

  /* Select the Trigger selection : ETRF */
  tmpsmcr &= SMCR_TS_Mask;
  tmpsmcr |= TIM_TS_ETRF;

  /* Write to TIMx SMCR */
  TIMx->SMCR = tmpsmcr;
}

/*******************************************************************************
* Function Name  : TIM_ETRClockMode2Config
* Description    : Configures the External clock Mode2
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_ExtTRGPrescaler: The external Trigger Prescaler.
*                    It can be one of the following values:
*                       - TIM_ExtTRGPSC_OFF
*                       - TIM_ExtTRGPSC_DIV2
*                       - TIM_ExtTRGPSC_DIV4
*                       - TIM_ExtTRGPSC_DIV8
*                  - TIM_ExtTRGPolarity: The external Trigger Polarity.
*                    It can be one of the following values:
*                       - TIM_ExtTRGPolarity_Inverted
*                       - TIM_ExtTRGPolarity_NonInverted
*                  - ExtTRGFilter: External Trigger Filter.
*                    This parameter must be a value between 0x00 and 0x0F
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, u16 TIM_ExtTRGPrescaler, 
                             u16 TIM_ExtTRGPolarity, u16 ExtTRGFilter)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler));
  assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity));
  assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter));

  /* Configure the ETR Clock source */
  TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter);

  /* Enable the External clock mode2 */
  TIMx->SMCR |= SMCR_ECE_Set;
}

/*******************************************************************************
* Function Name  : TIM_ETRConfig
* Description    : Configures the TIMx External Trigger (ETR).
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_ExtTRGPrescaler: The external Trigger Prescaler.
*                    This parameter can be one of the following values:
*                       - TIM_ExtTRGPSC_OFF
*                       - TIM_ExtTRGPSC_DIV2
*                       - TIM_ExtTRGPSC_DIV4
*                       - TIM_ExtTRGPSC_DIV8
*                  - TIM_ExtTRGPolarity: The external Trigger Polarity.
*                    This parameter can be one of the following values:
*                       - TIM_ExtTRGPolarity_Inverted
*                       - TIM_ExtTRGPolarity_NonInverted
*                  - ExtTRGFilter: External Trigger Filter.
*                    This parameter must be a value between 0x00 and 0x0F.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_ETRConfig(TIM_TypeDef* TIMx, u16 TIM_ExtTRGPrescaler, u16 TIM_ExtTRGPolarity,
                   u16 ExtTRGFilter)
{
  u16 tmpsmcr = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler));
  assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity));
  assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter));

  tmpsmcr = TIMx->SMCR;

  /* Reset the ETR Bits */
  tmpsmcr &= SMCR_ETR_Mask;

  /* Set the Prescaler, the Filter value and the Polarity */
  tmpsmcr |= TIM_ExtTRGPrescaler | TIM_ExtTRGPolarity | (u16)(ExtTRGFilter << 8);

  /* Write to TIMx SMCR */
  TIMx->SMCR = tmpsmcr;
}

/*******************************************************************************
* Function Name  : TIM_PrescalerConfig
* Description    : Configures the TIMx Prescaler.
* Input          : - TIMx: where x can be  1 to 8 to select the TIM peripheral.
*                  - Prescaler: specifies the Prescaler Register value
*                  - TIM_PSCReloadMode: specifies the TIM Prescaler Reload mode
*                    This parameter can be one of the following values:
*                       - TIM_PSCReloadMode_Update: The Prescaler is loaded at
*                         the update event.
*                       - TIM_PSCReloadMode_Immediate: The Prescaler is loaded
*                         immediatly.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_PrescalerConfig(TIM_TypeDef* TIMx, u16 Prescaler, u16 TIM_PSCReloadMode)
{
  /* Check the parameters */
  assert_param(IS_TIM_ALL_PERIPH(TIMx));
  assert_param(IS_TIM_PRESCALER_RELOAD(TIM_PSCReloadMode));

  /* Set the Prescaler value */
  TIMx->PSC = Prescaler;

  /* Set or reset the UG Bit */
  TIMx->EGR = TIM_PSCReloadMode;
}

/*******************************************************************************
* Function Name  : TIM_CounterModeConfig
* Description    : Specifies the TIMx Counter Mode to be used.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_CounterMode: specifies the Counter Mode to be used
*                    This parameter can be one of the following values:
*                       - TIM_CounterMode_Up: TIM Up Counting Mode
*                       - TIM_CounterMode_Down: TIM Down Counting Mode
*                       - TIM_CounterMode_CenterAligned1: TIM Center Aligned Mode1
*                       - TIM_CounterMode_CenterAligned2: TIM Center Aligned Mode2
*                       - TIM_CounterMode_CenterAligned3: TIM Center Aligned Mode3
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_CounterModeConfig(TIM_TypeDef* TIMx, u16 TIM_CounterMode)
{
  u16 tmpcr1 = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_COUNTER_MODE(TIM_CounterMode));

  tmpcr1 = TIMx->CR1;

  /* Reset the CMS and DIR Bits */
  tmpcr1 &= CR1_CounterMode_Mask;

  /* Set the Counter Mode */
  tmpcr1 |= TIM_CounterMode;

  /* Write to TIMx CR1 register */
  TIMx->CR1 = tmpcr1;
}

/*******************************************************************************
* Function Name  : TIM_SelectInputTrigger
* Description    : Selects the Input Trigger source
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_InputTriggerSource: The Input Trigger source.
*                    This parameter can be one of the following values:
*                       - TIM_TS_ITR0: Internal Trigger 0
*                       - TIM_TS_ITR1: Internal Trigger 1
*                       - TIM_TS_ITR2: Internal Trigger 2
*                       - TIM_TS_ITR3: Internal Trigger 3
*                       - TIM_TS_TI1F_ED: TI1 Edge Detector
*                       - TIM_TS_TI1FP1: Filtered Timer Input 1
*                       - TIM_TS_TI2FP2: Filtered Timer Input 2
*                       - TIM_TS_ETRF: External Trigger input
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, u16 TIM_InputTriggerSource)
{
  u16 tmpsmcr = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_TRIGGER_SELECTION(TIM_InputTriggerSource));

  /* Get the TIMx SMCR register value */
  tmpsmcr = TIMx->SMCR;

  /* Reset the TS Bits */
  tmpsmcr &= SMCR_TS_Mask;

  /* Set the Input Trigger source */
  tmpsmcr |= TIM_InputTriggerSource;

  /* Write to TIMx SMCR */
  TIMx->SMCR = tmpsmcr;
}

/*******************************************************************************
* Function Name  : TIM_EncoderInterfaceConfig
* Description    : Configures the TIMx Encoder Interface.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_EncoderMode: specifies the TIMx Encoder Mode.
*                    This parameter can be one of the following values:
*                       - TIM_EncoderMode_TI1: Counter counts on TI1FP1 edge
*                         depending on TI2FP2 level.
*                       - TIM_EncoderMode_TI2: Counter counts on TI2FP2 edge
*                         depending on TI1FP1 level.
*                       - TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and
*                         TI2FP2 edges depending on the level of the other input.
*                  - TIM_IC1Polarity: specifies the IC1 Polarity
*                    This parmeter can be one of the following values:
*                        - TIM_ICPolarity_Falling: IC Falling edge.
*                        - TIM_ICPolarity_Rising: IC Rising edge.
*                  - TIM_IC2Polarity: specifies the IC2 Polarity
*                    This parmeter can be one of the following values:
*                        - TIM_ICPolarity_Falling: IC Falling edge.
*                        - TIM_ICPolarity_Rising: IC Rising edge.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, u16 TIM_EncoderMode,
                                u16 TIM_IC1Polarity, u16 TIM_IC2Polarity)
{
  u16 tmpsmcr = 0;
  u16 tmpccmr1 = 0;
  u16 tmpccer = 0;
    
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_ENCODER_MODE(TIM_EncoderMode));
  assert_param(IS_TIM_IC_POLARITY(TIM_IC1Polarity));
  assert_param(IS_TIM_IC_POLARITY(TIM_IC2Polarity));

  /* Get the TIMx SMCR register value */
  tmpsmcr = TIMx->SMCR;

  /* Get the TIMx CCMR1 register value */
  tmpccmr1 = TIMx->CCMR1;

  /* Get the TIMx CCER register value */
  tmpccer = TIMx->CCER;

  /* Set the encoder Mode */
  tmpsmcr &= SMCR_SMS_Mask;
  tmpsmcr |= TIM_EncoderMode;

  /* Select the Capture Compare 1 and the Capture Compare 2 as input */
  tmpccmr1 &= CCMR_CC13S_Mask & CCMR_CC24S_Mask;
  tmpccmr1 |= CCMR_TI13Direct_Set | CCMR_TI24Direct_Set;

  /* Set the TI1 and the TI2 Polarities */
  tmpccer &= CCER_CC1P_Reset & CCER_CC2P_Reset;
  tmpccer |= (TIM_IC1Polarity | (u16)(TIM_IC2Polarity << 4));

  /* Write to TIMx SMCR */
  TIMx->SMCR = tmpsmcr;

  /* Write to TIMx CCMR1 */
  TIMx->CCMR1 = tmpccmr1;

  /* Write to TIMx CCER */
  TIMx->CCER = tmpccer;
}

/*******************************************************************************
* Function Name  : TIM_ForcedOC1Config
* Description    : Forces the TIMx output 1 waveform to active or inactive level.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_ForcedAction: specifies the forced Action to be set to
*                    the output waveform.
*                    This parameter can be one of the following values:
*                       - TIM_ForcedAction_Active: Force active level on OC1REF
*                       - TIM_ForcedAction_InActive: Force inactive level on
*                         OC1REF.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction)
{
  u16 tmpccmr1 = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));

  tmpccmr1 = TIMx->CCMR1;

  /* Reset the OC1M Bits */
  tmpccmr1 &= CCMR_OC13M_Mask;

  /* Configure The Forced output Mode */
  tmpccmr1 |= TIM_ForcedAction;

  /* Write to TIMx CCMR1 register */
  TIMx->CCMR1 = tmpccmr1;
}

/*******************************************************************************
* Function Name  : TIM_ForcedOC2Config
* Description    : Forces the TIMx output 2 waveform to active or inactive level.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_ForcedAction: specifies the forced Action to be set to
*                    the output waveform.
*                    This parameter can be one of the following values:
*                       - TIM_ForcedAction_Active: Force active level on OC2REF
*                       - TIM_ForcedAction_InActive: Force inactive level on
*                         OC2REF.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction)
{
  u16 tmpccmr1 = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));

  tmpccmr1 = TIMx->CCMR1;

  /* Reset the OC2M Bits */
  tmpccmr1 &= CCMR_OC24M_Mask;

  /* Configure The Forced output Mode */
  tmpccmr1 |= (u16)(TIM_ForcedAction << 8);

  /* Write to TIMx CCMR1 register */
  TIMx->CCMR1 = tmpccmr1;
}

/*******************************************************************************
* Function Name  : TIM_ForcedOC3Config
* Description    : Forces the TIMx output 3 waveform to active or inactive level.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_ForcedAction: specifies the forced Action to be set to
*                    the output waveform.
*                    This parameter can be one of the following values:
*                       - TIM_ForcedAction_Active: Force active level on OC3REF
*                       - TIM_ForcedAction_InActive: Force inactive level on
*                         OC3REF.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction)
{
  u16 tmpccmr2 = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));

  tmpccmr2 = TIMx->CCMR2;

  /* Reset the OC1M Bits */
  tmpccmr2 &= CCMR_OC13M_Mask;

  /* Configure The Forced output Mode */
  tmpccmr2 |= TIM_ForcedAction;

  /* Write to TIMx CCMR2 register */
  TIMx->CCMR2 = tmpccmr2;
}

/*******************************************************************************
* Function Name  : TIM_ForcedOC4Config
* Description    : Forces the TIMx output 4 waveform to active or inactive level.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_ForcedAction: specifies the forced Action to be set to
*                    the output waveform.
*                    This parameter can be one of the following values:
*                       - TIM_ForcedAction_Active: Force active level on OC4REF
*                       - TIM_ForcedAction_InActive: Force inactive level on
*                         OC4REF.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction)
{
  u16 tmpccmr2 = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
  tmpccmr2 = TIMx->CCMR2;

  /* Reset the OC2M Bits */
  tmpccmr2 &= CCMR_OC24M_Mask;

  /* Configure The Forced output Mode */
  tmpccmr2 |= (u16)(TIM_ForcedAction << 8);

  /* Write to TIMx CCMR2 register */
  TIMx->CCMR2 = tmpccmr2;
}

/*******************************************************************************
* Function Name  : TIM_ARRPreloadConfig
* Description    : Enables or disables TIMx peripheral Preload register on ARR.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - NewState: new state of the TIMx peripheral Preload register
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_TIM_ALL_PERIPH(TIMx));
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if (NewState != DISABLE)
  {
    /* Set the ARR Preload Bit */
    TIMx->CR1 |= CR1_ARPE_Set;
  }
  else
  {
    /* Reset the ARR Preload Bit */
    TIMx->CR1 &= CR1_ARPE_Reset;
  }
}

/*******************************************************************************
* Function Name  : TIM_SelectCOM
* Description    : Selects the TIM peripheral Commutation event.
* Input          :- TIMx: where x can be  1 or 8 to select the TIMx peripheral
*                 - NewState: new state of the Commutation event.
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_TIM_18_PERIPH(TIMx));
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if (NewState != DISABLE)
  {
    /* Set the COM Bit */
    TIMx->CR2 |= CR2_CCUS_Set;
  }
  else
  {
    /* Reset the COM Bit */
    TIMx->CR2 &= CR2_CCUS_Reset;
  }
}

/*******************************************************************************
* Function Name  : TIM_SelectCCDMA
* Description    : Selects the TIMx peripheral Capture Compare DMA source.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - NewState: new state of the Capture Compare DMA source
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if (NewState != DISABLE)
  {
    /* Set the CCDS Bit */
    TIMx->CR2 |= CR2_CCDS_Set;
  }
  else
  {
    /* Reset the CCDS Bit */
    TIMx->CR2 &= CR2_CCDS_Reset;
  }
}

/*******************************************************************************
* Function Name  : TIM_CCPreloadControl
* Description    : Sets or Resets the TIM peripheral Capture Compare Preload 
*                  Control bit.
* Input          :- TIMx: where x can be  1 or 8 to select the TIMx peripheral
*                 - NewState: new state of the Capture Compare Preload Control bit
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState)
{ 
  /* Check the parameters */
  assert_param(IS_TIM_18_PERIPH(TIMx));
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if (NewState != DISABLE)
  {
    /* Set the CCPC Bit */
    TIMx->CR2 |= CR2_CCPC_Set;
  }
  else
  {
    /* Reset the CCPC Bit */
    TIMx->CR2 &= CR2_CCPC_Reset;
  }
}

/*******************************************************************************
* Function Name  : TIM_OC1PreloadConfig
* Description    : Enables or disables the TIMx peripheral Preload register on CCR1.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_OCPreload: new state of the TIMx peripheral Preload
*                    register
*                    This parameter can be one of the following values:
*                       - TIM_OCPreload_Enable
*                       - TIM_OCPreload_Disable
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload)
{
  u16 tmpccmr1 = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));

  tmpccmr1 = TIMx->CCMR1;

  /* Reset the OC1PE Bit */
  tmpccmr1 &= CCMR_OC13PE_Reset;

  /* Enable or Disable the Output Compare Preload feature */
  tmpccmr1 |= TIM_OCPreload;

  /* Write to TIMx CCMR1 register */
  TIMx->CCMR1 = tmpccmr1;
}

/*******************************************************************************
* Function Name  : TIM_OC2PreloadConfig
* Description    : Enables or disables the TIMx peripheral Preload register on CCR2.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_OCPreload: new state of the TIMx peripheral Preload
*                    register
*                    This parameter can be one of the following values:
*                       - TIM_OCPreload_Enable
*                       - TIM_OCPreload_Disable
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload)
{
  u16 tmpccmr1 = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));

  tmpccmr1 = TIMx->CCMR1;

  /* Reset the OC2PE Bit */
  tmpccmr1 &= CCMR_OC24PE_Reset;

  /* Enable or Disable the Output Compare Preload feature */
  tmpccmr1 |= (u16)(TIM_OCPreload << 8);

  /* Write to TIMx CCMR1 register */
  TIMx->CCMR1 = tmpccmr1;
}

/*******************************************************************************
* Function Name  : TIM_OC3PreloadConfig
* Description    : Enables or disables the TIMx peripheral Preload register on CCR3.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_OCPreload: new state of the TIMx peripheral Preload
*                    register
*                    This parameter can be one of the following values:
*                       - TIM_OCPreload_Enable
*                       - TIM_OCPreload_Disable
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload)
{
  u16 tmpccmr2 = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));

  tmpccmr2 = TIMx->CCMR2;

  /* Reset the OC3PE Bit */
  tmpccmr2 &= CCMR_OC13PE_Reset;

  /* Enable or Disable the Output Compare Preload feature */
  tmpccmr2 |= TIM_OCPreload;

  /* Write to TIMx CCMR2 register */
  TIMx->CCMR2 = tmpccmr2;
}

/*******************************************************************************
* Function Name  : TIM_OC4PreloadConfig
* Description    : Enables or disables the TIMx peripheral Preload register on CCR4.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_OCPreload: new state of the TIMx peripheral Preload
*                    register
*                    This parameter can be one of the following values:
*                       - TIM_OCPreload_Enable
*                       - TIM_OCPreload_Disable
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload)
{
  u16 tmpccmr2 = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));

  tmpccmr2 = TIMx->CCMR2;

  /* Reset the OC4PE Bit */
  tmpccmr2 &= CCMR_OC24PE_Reset;

  /* Enable or Disable the Output Compare Preload feature */
  tmpccmr2 |= (u16)(TIM_OCPreload << 8);

  /* Write to TIMx CCMR2 register */
  TIMx->CCMR2 = tmpccmr2;
}

/*******************************************************************************
* Function Name  : TIM_OC1FastConfig
* Description    : Configures the TIMx Output Compare 1 Fast feature.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_OCFast: new state of the Output Compare Fast Enable Bit.
*                    This parameter can be one of the following values:
*                       - TIM_OCFast_Enable: TIM output compare fast enable
*                       - TIM_OCFast_Disable: TIM output compare fast disable
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_OC1FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast)
{
  u16 tmpccmr1 = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));

  /* Get the TIMx CCMR1 register value */
  tmpccmr1 = TIMx->CCMR1;

  /* Reset the OC1FE Bit */
  tmpccmr1 &= CCMR_OC13FE_Reset;

  /* Enable or Disable the Output Compare Fast Bit */
  tmpccmr1 |= TIM_OCFast;

  /* Write to TIMx CCMR1 */
  TIMx->CCMR1 = tmpccmr1;
}

/*******************************************************************************
* Function Name  : TIM_OC2FastConfig
* Description    : Configures the TIMx Output Compare 2 Fast feature.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_OCFast: new state of the Output Compare Fast Enable Bit.
*                    This parameter can be one of the following values:
*                       - TIM_OCFast_Enable: TIM output compare fast enable
*                       - TIM_OCFast_Disable: TIM output compare fast disable
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_OC2FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast)
{
  u16 tmpccmr1 = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));

  /* Get the TIMx CCMR1 register value */
  tmpccmr1 = TIMx->CCMR1;

  /* Reset the OC2FE Bit */
  tmpccmr1 &= CCMR_OC24FE_Reset;

  /* Enable or Disable the Output Compare Fast Bit */
  tmpccmr1 |= (u16)(TIM_OCFast << 8);

  /* Write to TIMx CCMR1 */
  TIMx->CCMR1 = tmpccmr1;
}

/*******************************************************************************
* Function Name  : TIM_OC3FastConfig
* Description    : Configures the TIMx Output Compare 3 Fast feature.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_OCFast: new state of the Output Compare Fast Enable Bit.
*                    This parameter can be one of the following values:
*                       - TIM_OCFast_Enable: TIM output compare fast enable
*                       - TIM_OCFast_Disable: TIM output compare fast disable
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_OC3FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast)
{
  u16 tmpccmr2 = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));

  /* Get the TIMx CCMR2 register value */
  tmpccmr2 = TIMx->CCMR2;

  /* Reset the OC3FE Bit */
  tmpccmr2 &= CCMR_OC13FE_Reset;

  /* Enable or Disable the Output Compare Fast Bit */
  tmpccmr2 |= TIM_OCFast;

  /* Write to TIMx CCMR2 */
  TIMx->CCMR2 = tmpccmr2;
}

/*******************************************************************************
* Function Name  : TIM_OC4FastConfig
* Description    : Configures the TIMx Output Compare 4 Fast feature.
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_OCFast: new state of the Output Compare Fast Enable Bit.
*                    This parameter can be one of the following values:
*                       - TIM_OCFast_Enable: TIM output compare fast enable
*                       - TIM_OCFast_Disable: TIM output compare fast disable
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_OC4FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast)
{
  u16 tmpccmr2 = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));

  /* Get the TIMx CCMR2 register value */
  tmpccmr2 = TIMx->CCMR2;

  /* Reset the OC4FE Bit */
  tmpccmr2 &= CCMR_OC24FE_Reset;

  /* Enable or Disable the Output Compare Fast Bit */
  tmpccmr2 |= (u16)(TIM_OCFast << 8);

  /* Write to TIMx CCMR2 */
  TIMx->CCMR2 = tmpccmr2;
}

/*******************************************************************************
* Function Name  : TIM_ClearOC1Ref
* Description    : Clears or safeguards the OCREF1 signal on an external event
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_OCClear: new state of the Output Compare Clear Enable Bit.
*                    This parameter can be one of the following values:
*                       - TIM_OCClear_Enable: TIM Output clear enable
*                       - TIM_OCClear_Disable: TIM Output clear disable
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, u16 TIM_OCClear)
{
  u16 tmpccmr1 = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));

  tmpccmr1 = TIMx->CCMR1;

  /* Reset the OC1CE Bit */
  tmpccmr1 &= CCMR_OC13CE_Reset;

  /* Enable or Disable the Output Compare Clear Bit */
  tmpccmr1 |= TIM_OCClear;

  /* Write to TIMx CCMR1 register */
  TIMx->CCMR1 = tmpccmr1;
}

/*******************************************************************************
* Function Name  : TIM_ClearOC2Ref
* Description    : Clears or safeguards the OCREF2 signal on an external event
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_OCClear: new state of the Output Compare Clear Enable Bit.
*                    This parameter can be one of the following values:
*                       - TIM_OCClear_Enable: TIM Output clear enable
*                       - TIM_OCClear_Disable: TIM Output clear disable
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, u16 TIM_OCClear)
{
  u16 tmpccmr1 = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));

  tmpccmr1 = TIMx->CCMR1;

  /* Reset the OC2CE Bit */
  tmpccmr1 &= CCMR_OC24CE_Reset;

  /* Enable or Disable the Output Compare Clear Bit */
  tmpccmr1 |= (u16)(TIM_OCClear << 8);

  /* Write to TIMx CCMR1 register */
  TIMx->CCMR1 = tmpccmr1;
}

/*******************************************************************************
* Function Name  : TIM_ClearOC3Ref
* Description    : Clears or safeguards the OCREF3 signal on an external event
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_OCClear: new state of the Output Compare Clear Enable Bit.
*                    This parameter can be one of the following values:
*                       - TIM_OCClear_Enable: TIM Output clear enable
*                       - TIM_OCClear_Disable: TIM Output clear disable
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, u16 TIM_OCClear)
{
  u16 tmpccmr2 = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));

  tmpccmr2 = TIMx->CCMR2;

  /* Reset the OC3CE Bit */
  tmpccmr2 &= CCMR_OC13CE_Reset;

  /* Enable or Disable the Output Compare Clear Bit */
  tmpccmr2 |= TIM_OCClear;

  /* Write to TIMx CCMR2 register */
  TIMx->CCMR2 = tmpccmr2;
}

/*******************************************************************************
* Function Name  : TIM_ClearOC4Ref
* Description    : Clears or safeguards the OCREF4 signal on an external event
* Input          : - TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_OCClear: new state of the Output Compare Clear Enable Bit.
*                    This parameter can be one of the following values:
*                       - TIM_OCClear_Enable: TIM Output clear enable
*                       - TIM_OCClear_Disable: TIM Output clear disable
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, u16 TIM_OCClear)
{
  u16 tmpccmr2 = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));

  tmpccmr2 = TIMx->CCMR2;

  /* Reset the OC4CE Bit */
  tmpccmr2 &= CCMR_OC24CE_Reset;

  /* Enable or Disable the Output Compare Clear Bit */
  tmpccmr2 |= (u16)(TIM_OCClear << 8);

  /* Write to TIMx CCMR2 register */
  TIMx->CCMR2 = tmpccmr2;
}

/*******************************************************************************
* Function Name  : TIM_OC1PolarityConfig
* Description    : Configures the TIMx channel 1 polarity.
* Input          : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_OCPolarity: specifies the OC1 Polarity
*                    This parmeter can be one of the following values:
*                       - TIM_OCPolarity_High: Output Compare active high
*                       - TIM_OCPolarity_Low: Output Compare active low
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity)
{
  u16 tmpccer = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));

  tmpccer = TIMx->CCER;

  /* Set or Reset the CC1P Bit */
  tmpccer &= CCER_CC1P_Reset;
  tmpccer |= TIM_OCPolarity;

  /* Write to TIMx CCER register */
  TIMx->CCER = tmpccer;
}

/*******************************************************************************
* Function Name  : TIM_OC1NPolarityConfig
* Description    : Configures the TIMx Channel 1N polarity.
* Input          : - TIMx: where x can be 1 or 8 to select the TIM peripheral.
*                  - TIM_OCNPolarity: specifies the OC1N Polarity
*                    This parmeter can be one of the following values:
*                       - TIM_OCNPolarity_High: Output Compare active high
*                       - TIM_OCNPolarity_Low: Output Compare active low
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCNPolarity)
{
  u16 tmpccer = 0;

  /* Check the parameters */
  assert_param(IS_TIM_18_PERIPH(TIMx));
  assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity));
   
  tmpccer = TIMx->CCER;

  /* Set or Reset the CC1NP Bit */
  tmpccer &= CCER_CC1NP_Reset;
  tmpccer |= TIM_OCNPolarity;

  /* Write to TIMx CCER register */
  TIMx->CCER = tmpccer;
}

/*******************************************************************************
* Function Name  : TIM_OC2PolarityConfig
* Description    : Configures the TIMx channel 2 polarity.
* Input          : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_OCPolarity: specifies the OC2 Polarity
*                    This parmeter can be one of the following values:
*                       - TIM_OCPolarity_High: Output Compare active high
*                       - TIM_OCPolarity_Low: Output Compare active low
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity)
{
  u16 tmpccer = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));

  tmpccer = TIMx->CCER;

  /* Set or Reset the CC2P Bit */
  tmpccer &= CCER_CC2P_Reset;
  tmpccer |= (u16)(TIM_OCPolarity << 4);

  /* Write to TIMx CCER register */
  TIMx->CCER = tmpccer;
}

/*******************************************************************************
* Function Name  : TIM_OC2NPolarityConfig
* Description    : Configures the TIMx Channel 2N polarity.
* Input          : - TIMx: where x can be 1 or 8 to select the TIM peripheral.
*                  - TIM_OCNPolarity: specifies the OC2N Polarity
*                    This parmeter can be one of the following values:
*                       - TIM_OCNPolarity_High: Output Compare active high
*                       - TIM_OCNPolarity_Low: Output Compare active low
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCNPolarity)
{
  u16 tmpccer = 0;

  /* Check the parameters */
  assert_param(IS_TIM_18_PERIPH(TIMx));
  assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity));
  
  tmpccer = TIMx->CCER;

  /* Set or Reset the CC2NP Bit */
  tmpccer &= CCER_CC2NP_Reset;
  tmpccer |= (u16)(TIM_OCNPolarity << 4);

  /* Write to TIMx CCER register */
  TIMx->CCER = tmpccer;
}

/*******************************************************************************
* Function Name  : TIM_OC3PolarityConfig
* Description    : Configures the TIMx channel 3 polarity.
* Input          : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_OCPolarity: specifies the OC3 Polarity
*                    This parmeter can be one of the following values:
*                       - TIM_OCPolarity_High: Output Compare active high
*                       - TIM_OCPolarity_Low: Output Compare active low
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity)
{
  u16 tmpccer = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));

  tmpccer = TIMx->CCER;

  /* Set or Reset the CC3P Bit */
  tmpccer &= CCER_CC3P_Reset;
  tmpccer |= (u16)(TIM_OCPolarity << 8);

  /* Write to TIMx CCER register */
  TIMx->CCER = tmpccer;
}

/*******************************************************************************
* Function Name  : TIM_OC3NPolarityConfig
* Description    : Configures the TIMx Channel 3N polarity.
* Input          : - TIMx: where x can be 1 or 8 to select the TIM peripheral.
*                  - TIM_OCNPolarity: specifies the OC3N Polarity
*                    This parmeter can be one of the following values:
*                       - TIM_OCNPolarity_High: Output Compare active high
*                       - TIM_OCNPolarity_Low: Output Compare active low
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCNPolarity)
{
  u16 tmpccer = 0;
 
  /* Check the parameters */
  assert_param(IS_TIM_18_PERIPH(TIMx));
  assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity));
    
  tmpccer = TIMx->CCER;

  /* Set or Reset the CC3NP Bit */
  tmpccer &= CCER_CC3NP_Reset;
  tmpccer |= (u16)(TIM_OCNPolarity << 8);

  /* Write to TIMx CCER register */
  TIMx->CCER = tmpccer;
}

/*******************************************************************************
* Function Name  : TIM_OC4PolarityConfig
* Description    : Configures the TIMx channel 4 polarity.
* Input          : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_OCPolarity: specifies the OC4 Polarity
*                    This parmeter can be one of the following values:
*                       - TIM_OCPolarity_High: Output Compare active high
*                       - TIM_OCPolarity_Low: Output Compare active low
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity)
{
  u16 tmpccer = 0;

  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));

  tmpccer = TIMx->CCER;

  /* Set or Reset the CC4P Bit */
  tmpccer &= CCER_CC4P_Reset;
  tmpccer |= (u16)(TIM_OCPolarity << 12);

  /* Write to TIMx CCER register */
  TIMx->CCER = tmpccer;
}

/*******************************************************************************
* Function Name  : TIM_CCxCmd
* Description    : Enables or disables the TIM Capture Compare Channel x.
* Input          : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM
*                    peripheral.
*                  - TIM_Channel: specifies the TIM Channel
*                    This parmeter can be one of the following values:
*                       - TIM_Channel_1: TIM Channel 1
*                       - TIM_Channel_2: TIM Channel 2
*                       - TIM_Channel_3: TIM Channel 3
*                       - TIM_Channel_4: TIM Channel 4
*                 - TIM_CCx: specifies the TIM Channel CCxE bit new state.
*                   This parameter can be: TIM_CCx_Enable or TIM_CCx_Disable. 
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_CCxCmd(TIM_TypeDef* TIMx, u16 TIM_Channel, u16 TIM_CCx)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_CHANNEL(TIM_Channel));
  assert_param(IS_TIM_CCX(TIM_CCx));

  /* Reset the CCxE Bit */
  TIMx->CCER &= (u16)(~((u16)(CCER_CCE_Set << TIM_Channel)));

  /* Set or reset the CCxE Bit */ 
  TIMx->CCER |=  (u16)(TIM_CCx << TIM_Channel);
}

/*******************************************************************************
* Function Name  : TIM_CCxNCmd
* Description    : Enables or disables the TIM Capture Compare Channel xN.
* Input          :- TIMx: where x can be 1 or 8 to select the TIM peripheral.
*                 - TIM_Channel: specifies the TIM Channel
*                    This parmeter can be one of the following values:
*                       - TIM_Channel_1: TIM Channel 1
*                       - TIM_Channel_2: TIM Channel 2
*                       - TIM_Channel_3: TIM Channel 3
*                 - TIM_CCx: specifies the TIM Channel CCxNE bit new state.
*                   This parameter can be: TIM_CCxN_Enable or TIM_CCxN_Disable. 
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_CCxNCmd(TIM_TypeDef* TIMx, u16 TIM_Channel, u16 TIM_CCxN)
{
  /* Check the parameters */
  assert_param(IS_TIM_18_PERIPH(TIMx));
  assert_param(IS_TIM_COMPLEMENTARY_CHANNEL(TIM_Channel));
  assert_param(IS_TIM_CCXN(TIM_CCxN));

  /* Reset the CCxNE Bit */
  TIMx->CCER &= (u16)(~((u16)(CCER_CCNE_Set << TIM_Channel)));

  /* Set or reset the CCxNE Bit */ 
  TIMx->CCER |=  (u16)(TIM_CCxN << TIM_Channel);
}

/*******************************************************************************
* Function Name  : TIM_SelectOCxM
* Description    : Selects the TIM Ouput Compare Mode.
*                  This function disables the selected channel before changing 
*                  the Ouput Compare Mode. User has to enable this channel using
*                  TIM_CCxCmd and TIM_CCxNCmd functions.
* Input          : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM
*                    peripheral.
*                  - TIM_Channel: specifies the TIM Channel
*                    This parmeter can be one of the following values:
*                       - TIM_Channel_1: TIM Channel 1
*                       - TIM_Channel_2: TIM Channel 2
*                       - TIM_Channel_3: TIM Channel 3
*                       - TIM_Channel_4: TIM Channel 4
*                  - TIM_OCMode: specifies the TIM Output Compare Mode.
*                    This paramter can be one of the following values:
*                       - TIM_OCMode_Timing
*                       - TIM_OCMode_Active
*                       - TIM_OCMode_Toggle
*                       - TIM_OCMode_PWM1
*                       - TIM_OCMode_PWM2
*                       - TIM_ForcedAction_Active
*                       - TIM_ForcedAction_InActive
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_SelectOCxM(TIM_TypeDef* TIMx, u16 TIM_Channel, u16 TIM_OCMode)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_CHANNEL(TIM_Channel));
  assert_param(IS_TIM_OCM(TIM_OCMode));
  
  /* Disable the Channel: Reset the CCxE Bit */
  TIMx->CCER &= (u16)(~((u16)(CCER_CCE_Set << TIM_Channel)));

  if((TIM_Channel == TIM_Channel_1) ||(TIM_Channel == TIM_Channel_3))
  {
    /* Reset the OCxM bits in the CCMRx register */
    *((vu32 *)((*(u32*)&TIMx) + CCMR_Offset + (TIM_Channel>>1))) &= CCMR_OC13M_Mask;
   
    /* Configure the OCxM bits in the CCMRx register */
    *((vu32 *)((*(u32*)&TIMx) + CCMR_Offset + (TIM_Channel>>1))) = TIM_OCMode;

  }
  else
  {
    /* Reset the OCxM bits in the CCMRx register */
    *((vu32 *)((*(u32*)&TIMx) + CCMR_Offset + ((u16)(TIM_Channel - 4)>> 1))) &= CCMR_OC24M_Mask;
    
    /* Configure the OCxM bits in the CCMRx register */
    *((vu32 *)((*(u32*)&TIMx) + CCMR_Offset + ((u16)(TIM_Channel - 4)>> 1))) = (u16)(TIM_OCMode << 8);
  }
}

/*******************************************************************************
* Function Name  : TIM_UpdateDisableConfig
* Description    : Enables or Disables the TIMx Update event.
* Input          : - TIMx: where x can be 1 to 8 to select the TIM peripheral.
*                  - NewState: new state of the TIMx UDIS bit
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_TIM_ALL_PERIPH(TIMx));
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if (NewState != DISABLE)
  {
    /* Set the Update Disable Bit */
    TIMx->CR1 |= CR1_UDIS_Set;
  }
  else
  {
    /* Reset the Update Disable Bit */
    TIMx->CR1 &= CR1_UDIS_Reset;
  }
}

/*******************************************************************************
* Function Name  : TIM_UpdateRequestConfig
* Description    : Configures the TIMx Update Request Interrupt source.
* Input          : - TIMx: where x can be 1 to 8 to select the TIM peripheral.
*                  - TIM_UpdateSource: specifies the Update source.
*                    This parameter can be one of the following values:
*                       - TIM_UpdateSource_Regular
*                       - TIM_UpdateSource_Global
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, u16 TIM_UpdateSource)
{
  /* Check the parameters */
  assert_param(IS_TIM_ALL_PERIPH(TIMx));
  assert_param(IS_TIM_UPDATE_SOURCE(TIM_UpdateSource));

  if (TIM_UpdateSource != TIM_UpdateSource_Global)
  {
    /* Set the URS Bit */
    TIMx->CR1 |= CR1_URS_Set;
  }
  else
  {
    /* Reset the URS Bit */
    TIMx->CR1 &= CR1_URS_Reset;
  }
}

/*******************************************************************************
* Function Name  : TIM_SelectHallSensor
* Description    : Enables or disables the TIMx’s Hall sensor interface.
* Input          : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
*                  - NewState: new state of the TIMx Hall sensor interface.
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if (NewState != DISABLE)
  {
    /* Set the TI1S Bit */
    TIMx->CR2 |= CR2_TI1S_Set;
  }
  else
  {
    /* Reset the TI1S Bit */
    TIMx->CR2 &= CR2_TI1S_Reset;
  }
}

/*******************************************************************************
* Function Name  : TIM_SelectOnePulseMode
* Description    : Selects the TIMx’s One Pulse Mode.
* Input          : - TIMx: where x can be 1 to 8 to select the TIM peripheral.
*                  - TIM_OPMode: specifies the OPM Mode to be used.
*                    This parameter can be one of the following values:
*                       - TIM_OPMode_Single
*                       - TIM_OPMode_Repetitive
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, u16 TIM_OPMode)
{
  /* Check the parameters */
  assert_param(IS_TIM_ALL_PERIPH(TIMx));
  assert_param(IS_TIM_OPM_MODE(TIM_OPMode));

  /* Reset the OPM Bit */
  TIMx->CR1 &= CR1_OPM_Reset;

  /* Configure the OPM Mode */
  TIMx->CR1 |= TIM_OPMode;
}

/*******************************************************************************
* Function Name  : TIM_SelectOutputTrigger
* Description    : Selects the TIMx Trigger Output Mode.
* Input          : - TIMx: where x can be 1 to 8 to select the TIM peripheral.
*                  - TIM_TRGOSource: specifies the Trigger Output source.
*                    This paramter can be as follow:
*                      1/ For TIM1 to TIM8:
*                       - TIM_TRGOSource_Reset 
*                       - TIM_TRGOSource_Enable
*                       - TIM_TRGOSource_Update
*                      2/ These parameters are available for all TIMx except 
*                         TIM6 and TIM7:
*                       - TIM_TRGOSource_OC1
*                       - TIM_TRGOSource_OC1Ref
*                       - TIM_TRGOSource_OC2Ref
*                       - TIM_TRGOSource_OC3Ref
*                       - TIM_TRGOSource_OC4Ref
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, u16 TIM_TRGOSource)
{
  /* Check the parameters */
  assert_param(IS_TIM_ALL_PERIPH(TIMx));
  assert_param(IS_TIM_TRGO_SOURCE(TIM_TRGOSource));
  assert_param(IS_TIM_PERIPH_TRGO(TIMx, TIM_TRGOSource));

  /* Reset the MMS Bits */
  TIMx->CR2 &= CR2_MMS_Mask;

  /* Select the TRGO source */
  TIMx->CR2 |=  TIM_TRGOSource;
}

/*******************************************************************************
* Function Name  : TIM_SelectSlaveMode
* Description    : Selects the TIMx Slave Mode.
* Input          : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_SlaveMode: specifies the Timer Slave Mode.
*                    This paramter can be one of the following values:
*                       - TIM_SlaveMode_Reset
*                       - TIM_SlaveMode_Gated
*                       - TIM_SlaveMode_Trigger
*                       - TIM_SlaveMode_External1
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, u16 TIM_SlaveMode)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_SLAVE_MODE(TIM_SlaveMode));

  /* Reset the SMS Bits */
  TIMx->SMCR &= SMCR_SMS_Mask;

  /* Select the Slave Mode */
  TIMx->SMCR |= TIM_SlaveMode;
}

/*******************************************************************************
* Function Name  : TIM_SelectMasterSlaveMode
* Description    : Sets or Resets the TIMx Master/Slave Mode.
* Input          : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_MasterSlaveMode: specifies the Timer Master Slave Mode.
*                    This paramter can be one of the following values:
*                       - TIM_MasterSlaveMode_Enable: synchronization between the
*                         current timer and its slaves (through TRGO).
*                       - TIM_MasterSlaveMode_Disable: No action
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, u16 TIM_MasterSlaveMode)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_MSM_STATE(TIM_MasterSlaveMode));

  /* Reset the MSM Bit */
  TIMx->SMCR &= SMCR_MSM_Reset;
  
  /* Set or Reset the MSM Bit */
  TIMx->SMCR |= TIM_MasterSlaveMode;
}

/*******************************************************************************
* Function Name  : TIM_SetCounter
* Description    : Sets the TIMx Counter Register value
* Input          : - TIMx: where x can be 1 to 8 to select the TIM peripheral.
*                  - Counter: specifies the Counter register new value.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_SetCounter(TIM_TypeDef* TIMx, u16 Counter)
{
  /* Check the parameters */
  assert_param(IS_TIM_ALL_PERIPH(TIMx));

  /* Set the Counter Register value */
  TIMx->CNT = Counter;
}

/*******************************************************************************
* Function Name  : TIM_SetAutoreload
* Description    : Sets the TIMx Autoreload Register value
* Input          : - TIMx: where x can be 1 to 8 to select the TIM peripheral.
*                  - Autoreload: specifies the Autoreload register new value.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_SetAutoreload(TIM_TypeDef* TIMx, u16 Autoreload)
{
  /* Check the parameters */
  assert_param(IS_TIM_ALL_PERIPH(TIMx));

  /* Set the Autoreload Register value */
  TIMx->ARR = Autoreload;
}

/*******************************************************************************
* Function Name  : TIM_SetCompare1
* Description    : Sets the TIMx Capture Compare1 Register value
* Input          : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - Compare1: specifies the Capture Compare1 register new value.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_SetCompare1(TIM_TypeDef* TIMx, u16 Compare1)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));

  /* Set the Capture Compare1 Register value */
  TIMx->CCR1 = Compare1;
}

/*******************************************************************************
* Function Name  : TIM_SetCompare2
* Description    : Sets the TIMx Capture Compare2 Register value
* Input          :  TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                   peripheral.
*                  - Compare2: specifies the Capture Compare2 register new value.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_SetCompare2(TIM_TypeDef* TIMx, u16 Compare2)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));

  /* Set the Capture Compare2 Register value */
  TIMx->CCR2 = Compare2;
}

/*******************************************************************************
* Function Name  : TIM_SetCompare3
* Description    : Sets the TIMx Capture Compare3 Register value
* Input          :  TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                   peripheral.
*                  - Compare3: specifies the Capture Compare3 register new value.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_SetCompare3(TIM_TypeDef* TIMx, u16 Compare3)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));

  /* Set the Capture Compare3 Register value */
  TIMx->CCR3 = Compare3;
}

/*******************************************************************************
* Function Name  : TIM_SetCompare4
* Description    : Sets the TIMx Capture Compare4 Register value
* Input          :  TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                   peripheral.
*                  - Compare4: specifies the Capture Compare4 register new value.
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_SetCompare4(TIM_TypeDef* TIMx, u16 Compare4)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));

  /* Set the Capture Compare4 Register value */
  TIMx->CCR4 = Compare4;
}

/*******************************************************************************
* Function Name  : TIM_SetIC1Prescaler
* Description    : Sets the TIMx Input Capture 1 prescaler.
* Input          : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_ICPSC: specifies the Input Capture1 prescaler
*                    new value.
*                    This parameter can be one of the following values:
*                       - TIM_ICPSC_DIV1: no prescaler
*                       - TIM_ICPSC_DIV2: capture is done once every 2 events
*                       - TIM_ICPSC_DIV4: capture is done once every 4 events
*                       - TIM_ICPSC_DIV8: capture is done once every 8 events
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, u16 TIM_ICPSC)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));

  /* Reset the IC1PSC Bits */
  TIMx->CCMR1 &= CCMR_IC13PSC_Mask;

  /* Set the IC1PSC value */
  TIMx->CCMR1 |= TIM_ICPSC;
}

/*******************************************************************************
* Function Name  : TIM_SetIC2Prescaler
* Description    : Sets the TIMx Input Capture 2 prescaler.
* Input          : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_ICPSC: specifies the Input Capture2 prescaler
*                    new value.
*                    This parameter can be one of the following values:
*                       - TIM_ICPSC_DIV1: no prescaler
*                       - TIM_ICPSC_DIV2: capture is done once every 2 events
*                       - TIM_ICPSC_DIV4: capture is done once every 4 events
*                       - TIM_ICPSC_DIV8: capture is done once every 8 events
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, u16 TIM_ICPSC)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));

  /* Reset the IC2PSC Bits */
  TIMx->CCMR1 &= CCMR_IC24PSC_Mask;

  /* Set the IC2PSC value */
  TIMx->CCMR1 |= (u16)(TIM_ICPSC << 8);
}

/*******************************************************************************
* Function Name  : TIM_SetIC3Prescaler
* Description    : Sets the TIMx Input Capture 3 prescaler.
* Input          : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_ICPSC: specifies the Input Capture3 prescaler
*                    new value.
*                    This parameter can be one of the following values:
*                       - TIM_ICPSC_DIV1: no prescaler
*                       - TIM_ICPSC_DIV2: capture is done once every 2 events
*                       - TIM_ICPSC_DIV4: capture is done once every 4 events
*                       - TIM_ICPSC_DIV8: capture is done once every 8 events
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, u16 TIM_ICPSC)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));

  /* Reset the IC3PSC Bits */
  TIMx->CCMR2 &= CCMR_IC13PSC_Mask;

  /* Set the IC3PSC value */
  TIMx->CCMR2 |= TIM_ICPSC;
}

/*******************************************************************************
* Function Name  : TIM_SetIC4Prescaler
* Description    : Sets the TIMx Input Capture 4 prescaler.
* Input          : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_ICPSC: specifies the Input Capture4 prescaler
*                    new value.
*                    This parameter can be one of the following values:
*                      - TIM_ICPSC_DIV1: no prescaler
*                      - TIM_ICPSC_DIV2: capture is done once every 2 events
*                      - TIM_ICPSC_DIV4: capture is done once every 4 events
*                      - TIM_ICPSC_DIV8: capture is done once every 8 events
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, u16 TIM_ICPSC)
{  
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));

  /* Reset the IC4PSC Bits */
  TIMx->CCMR2 &= CCMR_IC24PSC_Mask;

  /* Set the IC4PSC value */
  TIMx->CCMR2 |= (u16)(TIM_ICPSC << 8);
}

/*******************************************************************************
* Function Name  : TIM_SetClockDivision
* Description    : Sets the TIMx Clock Division value.
* Input          : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_CKD: specifies the clock division value.
*                    This parameter can be one of the following value:
*                       - TIM_CKD_DIV1: TDTS = Tck_tim
*                       - TIM_CKD_DIV2: TDTS = 2*Tck_tim
*                       - TIM_CKD_DIV4: TDTS = 4*Tck_tim
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_SetClockDivision(TIM_TypeDef* TIMx, u16 TIM_CKD)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));
  assert_param(IS_TIM_CKD_DIV(TIM_CKD));

  /* Reset the CKD Bits */
  TIMx->CR1 &= CR1_CKD_Mask;

  /* Set the CKD value */
  TIMx->CR1 |= TIM_CKD;
}
/*******************************************************************************
* Function Name  : TIM_GetCapture1
* Description    : Gets the TIMx Input Capture 1 value.
* Input          :  TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                   peripheral.
* Output         : None
* Return         : Capture Compare 1 Register value.
*******************************************************************************/
u16 TIM_GetCapture1(TIM_TypeDef* TIMx)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));

  /* Get the Capture 1 Register value */
  return TIMx->CCR1;
}

/*******************************************************************************
* Function Name  : TIM_GetCapture2
* Description    : Gets the TIMx Input Capture 2 value.
* Input          :  TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                   peripheral.
* Output         : None
* Return         : Capture Compare 2 Register value.
*******************************************************************************/
u16 TIM_GetCapture2(TIM_TypeDef* TIMx)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));

  /* Get the Capture 2 Register value */
  return TIMx->CCR2;
}

/*******************************************************************************
* Function Name  : TIM_GetCapture3
* Description    : Gets the TIMx Input Capture 3 value.
* Input          :  TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                   peripheral.
* Output         : None
* Return         : Capture Compare 3 Register value.
*******************************************************************************/
u16 TIM_GetCapture3(TIM_TypeDef* TIMx)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx)); 

  /* Get the Capture 3 Register value */
  return TIMx->CCR3;
}

/*******************************************************************************
* Function Name  : TIM_GetCapture4
* Description    : Gets the TIMx Input Capture 4 value.
* Input          :  TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                   peripheral.
* Output         : None
* Return         : Capture Compare 4 Register value.
*******************************************************************************/
u16 TIM_GetCapture4(TIM_TypeDef* TIMx)
{
  /* Check the parameters */
  assert_param(IS_TIM_123458_PERIPH(TIMx));

  /* Get the Capture 4 Register value */
  return TIMx->CCR4;
}

/*******************************************************************************
* Function Name  : TIM_GetCounter
* Description    : Gets the TIMx Counter value.
* Input          : - TIMx: where x can be 1 to 8 to select the TIM peripheral.
* Output         : None
* Return         : Counter Register value.
*******************************************************************************/
u16 TIM_GetCounter(TIM_TypeDef* TIMx)
{
  /* Check the parameters */
  assert_param(IS_TIM_ALL_PERIPH(TIMx));

  /* Get the Counter Register value */
  return TIMx->CNT;
}

/*******************************************************************************
* Function Name  : TIM_GetPrescaler
* Description    : Gets the TIMx Prescaler value.
* Input          : - TIMx: where x can be 1 to 8 to select the TIM peripheral.
* Output         : None
* Return         : Prescaler Register value.
*******************************************************************************/
u16 TIM_GetPrescaler(TIM_TypeDef* TIMx)
{
  /* Check the parameters */
  assert_param(IS_TIM_ALL_PERIPH(TIMx));

  /* Get the Prescaler Register value */
  return TIMx->PSC;
}

/*******************************************************************************
* Function Name  : TIM_GetFlagStatus
* Description    : Checks whether the specified TIM flag is set or not.
* Input          : - TIMx: where x can be 1 to 8 to select the TIM peripheral.
*                  - TIM_FLAG: specifies the flag to check.
*                    This parameter can be one of the following values:
*                       - TIM_FLAG_Update: TIM update Flag
*                       - TIM_FLAG_CC1: TIM Capture Compare 1 Flag
*                       - TIM_FLAG_CC2: TIM Capture Compare 2 Flag
*                       - TIM_FLAG_CC3: TIM Capture Compare 3 Flag
*                       - TIM_FLAG_CC4: TIM Capture Compare 4 Flag
*                       - TIM_FLAG_COM: TIM Commutation Flag
*                       - TIM_FLAG_Trigger: TIM Trigger Flag
*                       - TIM_FLAG_Break: TIM Break Flag
*                       - TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag
*                       - TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag
*                       - TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag
*                       - TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag
* Output         : None
* Return         : The new state of TIM_FLAG (SET or RESET).
*******************************************************************************/
FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, u16 TIM_FLAG)
{ 
  ITStatus bitstatus = RESET;  

  /* Check the parameters */
  assert_param(IS_TIM_ALL_PERIPH(TIMx));
  assert_param(IS_TIM_GET_FLAG(TIM_FLAG));
  assert_param(IS_TIM_PERIPH_FLAG(TIMx, TIM_FLAG));
  
  if ((TIMx->SR & TIM_FLAG) != (u16)RESET)
  {
    bitstatus = SET;
  }
  else
  {
    bitstatus = RESET;
  }
  return bitstatus;
}

/*******************************************************************************
* Function Name  : TIM_ClearFlag
* Description    : Clears the TIMx's pending flags.
* Input          : - TIMx: where x can be 1 to 8 to select the TIM peripheral.
*                  - TIM_FLAG: specifies the flag bit to clear.
*                    This parameter can be any combination of the following values:
*                       - TIM_FLAG_Update: TIM update Flag
*                       - TIM_FLAG_CC1: TIM Capture Compare 1 Flag
*                       - TIM_FLAG_CC2: TIM Capture Compare 2 Flag
*                       - TIM_FLAG_CC3: TIM Capture Compare 3 Flag
*                       - TIM_FLAG_CC4: TIM Capture Compare 4 Flag
*                       - TIM_FLAG_COM: TIM Commutation Flag
*                       - TIM_FLAG_Trigger: TIM Trigger Flag
*                       - TIM_FLAG_Break: TIM Break Flag
*                       - TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag
*                       - TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag
*                       - TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag
*                       - TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_ClearFlag(TIM_TypeDef* TIMx, u16 TIM_FLAG)
{  
  /* Check the parameters */
  assert_param(IS_TIM_ALL_PERIPH(TIMx));
  assert_param(IS_TIM_CLEAR_FLAG(TIMx, TIM_FLAG));
   
  /* Clear the flags */
  TIMx->SR = (u16)~TIM_FLAG;
}

/*******************************************************************************
* Function Name  : TIM_GetITStatus
* Description    : Checks whether the TIM interrupt has occurred or not.
* Input          : - TIMx: where x can be 1 to 8 to select the TIM peripheral.
*                  - TIM_IT: specifies the TIM interrupt source to check.
*                    This parameter can be one of the following values:
*                       - TIM_IT_Update: TIM update Interrupt source
*                       - TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
*                       - TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
*                       - TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
*                       - TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
*                       - TIM_IT_COM: TIM Commutation Interrupt
*                         source
*                       - TIM_IT_Trigger: TIM Trigger Interrupt source
*                       - TIM_IT_Break: TIM Break Interrupt source
* Output         : None
* Return         : The new state of the TIM_IT(SET or RESET).
*******************************************************************************/
ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, u16 TIM_IT)
{
  ITStatus bitstatus = RESET;  
  u16 itstatus = 0x0, itenable = 0x0;

  /* Check the parameters */
  assert_param(IS_TIM_ALL_PERIPH(TIMx));
  assert_param(IS_TIM_GET_IT(TIM_IT));
  assert_param(IS_TIM_PERIPH_IT(TIMx, TIM_IT));
   
  itstatus = TIMx->SR & TIM_IT;
  
  itenable = TIMx->DIER & TIM_IT;

  if ((itstatus != (u16)RESET) && (itenable != (u16)RESET))
  {
    bitstatus = SET;
  }
  else
  {
    bitstatus = RESET;
  }
  return bitstatus;
}

/*******************************************************************************
* Function Name  : TIM_ClearITPendingBit
* Description    : Clears the TIMx's interrupt pending bits.
* Input          : - TIMx: where x can be 1 to 8 to select the TIM peripheral.
*                  - TIM_IT: specifies the pending bit to clear.
*                    This parameter can be any combination of the following values:
*                       - TIM_IT_Update: TIM1 update Interrupt source
*                       - TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
*                       - TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
*                       - TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
*                       - TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
*                       - TIM_IT_COM: TIM Commutation Interrupt
*                         source
*                       - TIM_IT_Trigger: TIM Trigger Interrupt source
*                       - TIM_IT_Break: TIM Break Interrupt source
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, u16 TIM_IT)
{
  /* Check the parameters */
  assert_param(IS_TIM_ALL_PERIPH(TIMx));
  assert_param(IS_TIM_PERIPH_IT(TIMx, TIM_IT));

  /* Clear the IT pending Bit */
  TIMx->SR = (u16)~TIM_IT;
}

/*******************************************************************************
* Function Name  : TI1_Config
* Description    : Configure the TI1 as Input.
* Input          : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_ICPolarity : The Input Polarity.
*                    This parameter can be one of the following values:
*                       - TIM_ICPolarity_Rising
*                       - TIM_ICPolarity_Falling
*                  - TIM_ICSelection: specifies the input to be used.
*                    This parameter can be one of the following values:
*                       - TIM_ICSelection_DirectTI: TIM Input 1 is selected to
*                         be connected to IC1.
*                       - TIM_ICSelection_IndirectTI: TIM Input 1 is selected to
*                         be connected to IC2.
*                       - TIM_ICSelection_TRC: TIM Input 1 is selected to be
*                         connected to TRC.
*                  - TIM_ICFilter: Specifies the Input Capture Filter.
*                    This parameter must be a value between 0x00 and 0x0F.
* Output         : None
* Return         : None
*******************************************************************************/
static void TI1_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection,
                       u16 TIM_ICFilter)
{
  u16 tmpccmr1 = 0, tmpccer = 0;

  /* Disable the Channel 1: Reset the CC1E Bit */
  TIMx->CCER &= CCER_CC1E_Reset;

  tmpccmr1 = TIMx->CCMR1;
  tmpccer = TIMx->CCER;

  /* Select the Input and set the filter */
  tmpccmr1 &= CCMR_CC13S_Mask & CCMR_IC13F_Mask;
  tmpccmr1 |= TIM_ICSelection | (u16)(TIM_ICFilter << 4);

  /* Select the Polarity and set the CC1E Bit */
  tmpccer &= CCER_CC1P_Reset;
  tmpccer |= TIM_ICPolarity | CCER_CC1E_Set;

  /* Write to TIMx CCMR1 and CCER registers */
  TIMx->CCMR1 = tmpccmr1;
  TIMx->CCER = tmpccer;
}

/*******************************************************************************
* Function Name  : TI2_Config
* Description    : Configure the TI2 as Input.
* Input          : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_ICPolarity : The Input Polarity.
*                    This parameter can be one of the following values:
*                       - TIM_ICPolarity_Rising
*                       - TIM_ICPolarity_Falling
*                  - TIM_ICSelection: specifies the input to be used.
*                    This parameter can be one of the following values:
*                       - TIM_ICSelection_DirectTI: TIM Input 2 is selected to
*                         be connected to IC2.
*                       - TIM_ICSelection_IndirectTI: TIM Input 2 is selected to
*                         be connected to IC1.
*                       - TIM_ICSelection_TRC: TIM Input 2 is selected to be
*                         connected to TRC.
*                  - TIM_ICFilter: Specifies the Input Capture Filter.
*                    This parameter must be a value between 0x00 and 0x0F.
* Output         : None
* Return         : None
*******************************************************************************/
static void TI2_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection,
                       u16 TIM_ICFilter)
{
  u16 tmpccmr1 = 0, tmpccer = 0, tmp = 0;

  /* Disable the Channel 2: Reset the CC2E Bit */
  TIMx->CCER &= CCER_CC2E_Reset;

  tmpccmr1 = TIMx->CCMR1;
  tmpccer = TIMx->CCER;
  tmp = (u16)(TIM_ICPolarity << 4);

  /* Select the Input and set the filter */
  tmpccmr1 &= CCMR_CC24S_Mask & CCMR_IC24F_Mask;
  tmpccmr1 |= (u16)(TIM_ICFilter << 12);
  tmpccmr1 |= (u16)(TIM_ICSelection << 8);

  /* Select the Polarity and set the CC2E Bit */
  tmpccer &= CCER_CC2P_Reset;
  tmpccer |=  tmp | CCER_CC2E_Set;

  /* Write to TIMx CCMR1 and CCER registers */
  TIMx->CCMR1 = tmpccmr1 ;
  TIMx->CCER = tmpccer;
}

/*******************************************************************************
* Function Name  : TI3_Config
* Description    : Configure the TI3 as Input.
* Input          : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_ICPolarity : The Input Polarity.
*                    This parameter can be one of the following values:
*                       - TIM_ICPolarity_Rising
*                       - TIM_ICPolarity_Falling
*                  - TIM_ICSelection: specifies the input to be used.
*                    This parameter can be one of the following values:
*                       - TIM_ICSelection_DirectTI: TIM Input 3 is selected to
*                         be connected to IC3.
*                       - TIM_ICSelection_IndirectTI: TIM Input 3 is selected to
*                         be connected to IC4.
*                       - TIM_ICSelection_TRC: TIM Input 3 is selected to be
*                         connected to TRC.
*                  - TIM_ICFilter: Specifies the Input Capture Filter.
*                    This parameter must be a value between 0x00 and 0x0F.
* Output         : None
* Return         : None
*******************************************************************************/
static void TI3_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection,
                       u16 TIM_ICFilter)
{
  u16 tmpccmr2 = 0, tmpccer = 0, tmp = 0;

  /* Disable the Channel 3: Reset the CC3E Bit */
  TIMx->CCER &= CCER_CC3E_Reset;

  tmpccmr2 = TIMx->CCMR2;
  tmpccer = TIMx->CCER;
  tmp = (u16)(TIM_ICPolarity << 8);

  /* Select the Input and set the filter */
  tmpccmr2 &= CCMR_CC13S_Mask & CCMR_IC13F_Mask;
  tmpccmr2 |= TIM_ICSelection | (u16)(TIM_ICFilter << 4);

  /* Select the Polarity and set the CC3E Bit */
  tmpccer &= CCER_CC3P_Reset;
  tmpccer |= tmp | CCER_CC3E_Set;

  /* Write to TIMx CCMR2 and CCER registers */
  TIMx->CCMR2 = tmpccmr2;
  TIMx->CCER = tmpccer;
}

/*******************************************************************************
* Function Name  : TI4_Config
* Description    : Configure the TI1 as Input.
* Input          : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM 
*                    peripheral.
*                  - TIM_ICPolarity : The Input Polarity.
*                    This parameter can be one of the following values:
*                       - TIM_ICPolarity_Rising
*                       - TIM_ICPolarity_Falling
*                  - TIM_ICSelection: specifies the input to be used.
*                    This parameter can be one of the following values:
*                       - TIM_ICSelection_DirectTI: TIM Input 4 is selected to
*                         be connected to IC4.
*                       - TIM_ICSelection_IndirectTI: TIM Input 4 is selected to
*                         be connected to IC3.
*                       - TIM_ICSelection_TRC: TIM Input 4 is selected to be
*                         connected to TRC.
*                  - TIM_ICFilter: Specifies the Input Capture Filter.
*                    This parameter must be a value between 0x00 and 0x0F.
* Output         : None
* Return         : None
*******************************************************************************/
static void TI4_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection,
                       u16 TIM_ICFilter)
{
  u16 tmpccmr2 = 0, tmpccer = 0, tmp = 0;

  /* Disable the Channel 4: Reset the CC4E Bit */
  TIMx->CCER &= CCER_CC4E_Reset;

  tmpccmr2 = TIMx->CCMR2;
  tmpccer = TIMx->CCER;
  tmp = (u16)(TIM_ICPolarity << 12);

  /* Select the Input and set the filter */
  tmpccmr2 &= CCMR_CC24S_Mask & CCMR_IC24F_Mask;
  tmpccmr2 |= (u16)(TIM_ICSelection << 8) | (u16)(TIM_ICFilter << 12);

  /* Select the Polarity and set the CC4E Bit */
  tmpccer &= CCER_CC4P_Reset;
  tmpccer |= tmp | CCER_CC4E_Set;

  /* Write to TIMx CCMR2 and CCER registers */
  TIMx->CCMR2 = tmpccmr2;
  TIMx->CCER = tmpccer ;
}

/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/