blob: 41f975e243e80e893e86a7c2d7d7d0252d07fbe1 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
|
#ifndef _ADC_H_
#define _ADC_H_
#include <inttypes.h>
#include "util.h"
#ifdef __cplusplus
extern "C"{
#endif
/* Notes:
* The maximum input impedance on each channel MUST be below .4kohms,
* or face the wrath of incorrect readings...
* This can be changed at the expense of sample time... see datasheet
*
* Need to up the sample time if otherwise... see datasheet */
/* We'll only use ADC1 for now... */
#define ADC_BASE 0x40012400
#define ADC_SR *(volatile uint32_t*)(ADC_BASE + 0)
#define ADC_CR1 *(volatile uint32_t*)(ADC_BASE + 0x4)
#define ADC_CR2 *(volatile uint32_t*)(ADC_BASE + 0x8)
#define ADC_SMPR1 *(volatile uint32_t*)(ADC_BASE + 0xC)
#define ADC_SMPR2 *(volatile uint32_t*)(ADC_BASE + 0x10)
#define ADC_SQR1 *(volatile uint32_t*)(ADC_BASE + 0x2C)
#define ADC_SQR3 *(volatile uint32_t*)(ADC_BASE + 0x34)
#define ADC_DR *(volatile uint32_t*)(ADC_BASE + 0x4C)
#define CR2_EXTSEL_SWSTART (0xE << 16)
#define CR2_RSTCAL (BIT(3))
#define CR2_EXTTRIG (BIT(20))
/* Bit banded bits */
#define CR2_ADON_BIT *(volatile uint32_t*)(BITBAND_PERI(ADC_BASE+0x8, 0))
#define CR2_CAL_BIT *(volatile uint32_t*)(BITBAND_PERI(ADC_BASE+0x8, 2))
#define CR2_RSTCAL_BIT *(volatile uint32_t*)(BITBAND_PERI(ADC_BASE+0x8, 3))
#define CR2_SWSTART_BIT *(volatile uint32_t*)(BITBAND_PERI(ADC_BASE+0x8 + 2, 6))
#define SR_EOC_BIT *(volatile uint32_t*)(BITBAND_PERI(ADC_BASE+0, 1))
#define NR_ANALOG_PINS 16
/* Initialize ADC1 to do one-shot conversions */
void adc_init(void);
/* Perform a single conversion on ADC[0-16],
* PRECONDITIONS:
* adc initialized */
static inline int adc_read(int channel) {
/* Set channel */
ADC_SQR3 = channel;
/* Start the conversion */
CR2_SWSTART_BIT = 1;
/* Wait for it to finish */
while(SR_EOC_BIT == 0)
;
return ADC_DR;
}
#ifdef __cplusplus
} // extern "C"
#endif
#endif
|