aboutsummaryrefslogtreecommitdiffstats
path: root/libmaple/usb/usb_cdcacm.c
blob: 07d2bc87034549b1311a69ca39b153fee540d74c (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
/******************************************************************************
 * The MIT License
 *
 * Copyright (c) 2011 LeafLabs LLC.
 *
 * Permission is hereby granted, free of charge, to any person
 * obtaining a copy of this software and associated documentation
 * files (the "Software"), to deal in the Software without
 * restriction, including without limitation the rights to use, copy,
 * modify, merge, publish, distribute, sublicense, and/or sell copies
 * of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 *****************************************************************************/

/**
 * @file usb_cdcacm.c
 *
 * @brief USB CDC ACM (a.k.a. virtual serial terminal, VCOM) state and
 *        routines.
 */

#include <libmaple/usb_cdcacm.h>

#include <libmaple/usb.h>
#include <libmaple/nvic.h>
#include <libmaple/delay.h>

/* Private headers */
#include "usb_descriptors.h"
#include "usb_lib_globals.h"
#include "usb_reg_map.h"

/* usb_lib headers */
#include "usb_type.h"
#include "usb_core.h"
#include "usb_def.h"

/******************************************************************************
 ******************************************************************************
 ***
 ***   HACK ALERT! FIXME FIXME FIXME FIXME!
 ***
 ***   A bunch of LeafLabs-specific configuration lives in here for
 ***   now.  This mess REALLY needs to get teased apart, with
 ***   appropriate pieces moved into Wirish.
 ***
 ******************************************************************************
 *****************************************************************************/

#if !(defined(BOARD_maple) || defined(BOARD_maple_RET6) ||      \
      defined(BOARD_maple_mini) || defined(BOARD_maple_native))
#warning USB CDC ACM relies on LeafLabs board-specific configuration.\
    You may have problems on non-LeafLabs boards.
#endif

static void vcomDataTxCb(void);
static void vcomDataRxCb(void);
static uint8* vcomGetSetLineCoding(uint16);

static void usbInit(void);
static void usbReset(void);
static RESULT usbDataSetup(uint8 request);
static RESULT usbNoDataSetup(uint8 request);
static RESULT usbGetInterfaceSetting(uint8 interface, uint8 alt_setting);
static uint8* usbGetDeviceDescriptor(uint16 length);
static uint8* usbGetConfigDescriptor(uint16 length);
static uint8* usbGetStringDescriptor(uint16 length);
static void usbSetConfiguration(void);
static void usbSetDeviceAddress(void);

static void wait_reset(void);

/*
 * VCOM config
 */

#define VCOM_CTRL_EPNUM           0x00
#define VCOM_CTRL_RX_ADDR         0x40
#define VCOM_CTRL_TX_ADDR         0x80
#define VCOM_CTRL_EPSIZE          0x40

#define VCOM_TX_ENDP              1
#define VCOM_TX_EPNUM             0x01
#define VCOM_TX_ADDR              0xC0
#define VCOM_TX_EPSIZE            0x40

#define VCOM_NOTIFICATION_ENDP    2
#define VCOM_NOTIFICATION_EPNUM   0x02
#define VCOM_NOTIFICATION_ADDR    0x100
#define VCOM_NOTIFICATION_EPSIZE  0x40

#define VCOM_RX_ENDP              3
#define VCOM_RX_EPNUM             0x03
#define VCOM_RX_ADDR              0x110
#define VCOM_RX_EPSIZE            0x40
#define VCOM_RX_BUFLEN            (VCOM_RX_EPSIZE*3)

/*
 * CDC ACM Requests
 */

#define SET_LINE_CODING        0x20
#define GET_LINE_CODING        0x21
#define SET_COMM_FEATURE       0x02
#define SET_CONTROL_LINE_STATE 0x22
#define CONTROL_LINE_DTR       (0x01)
#define CONTROL_LINE_RTS       (0x02)

/*
 * Descriptors
 */

#define USB_DEVICE_CLASS_CDC              0x02
#define USB_DEVICE_SUBCLASS_CDC           0x00
#define LEAFLABS_ID_VENDOR                0x1EAF
#define MAPLE_ID_PRODUCT                  0x0004
const USB_Descriptor_Device usbVcomDescriptor_Device = {
    .bLength            = sizeof(USB_Descriptor_Device),
    .bDescriptorType    = USB_DESCRIPTOR_TYPE_DEVICE,
    .bcdUSB             = 0x0200,
    .bDeviceClass       = USB_DEVICE_CLASS_CDC,
    .bDeviceSubClass    = USB_DEVICE_SUBCLASS_CDC,
    .bDeviceProtocol    = 0x00,
    .bMaxPacketSize0    = 0x40,
    .idVendor           = LEAFLABS_ID_VENDOR,
    .idProduct          = MAPLE_ID_PRODUCT,
    .bcdDevice          = 0x0200,
    .iManufacturer      = 0x01,
    .iProduct           = 0x02,
    .iSerialNumber      = 0x00,
    .bNumConfigurations = 0x01,
};

#define MAX_POWER (100 >> 1)
const USB_Descriptor_Config usbVcomDescriptor_Config = {
    .Config_Header = {
        .bLength              = sizeof(USB_Descriptor_Config_Header),
        .bDescriptorType      = USB_DESCRIPTOR_TYPE_CONFIGURATION,
        .wTotalLength         = sizeof(USB_Descriptor_Config),
        .bNumInterfaces       = 0x02,
        .bConfigurationValue  = 0x01,
        .iConfiguration       = 0x00,
        .bmAttributes         = (USB_CONFIG_ATTR_BUSPOWERED |
                                 USB_CONFIG_ATTR_SELF_POWERED),
        .bMaxPower            = MAX_POWER,
    },

    .CCI_Interface = {
        .bLength            = sizeof(USB_Descriptor_Interface),
        .bDescriptorType    = USB_DESCRIPTOR_TYPE_INTERFACE,
        .bInterfaceNumber   = 0x00,
        .bAlternateSetting  = 0x00,
        .bNumEndpoints      = 0x01,
        .bInterfaceClass    = USB_INTERFACE_CLASS_CDC,
        .bInterfaceSubClass = USB_INTERFACE_SUBCLASS_CDC_ACM,
        .bInterfaceProtocol = 0x01, /* Common AT Commands */
        .iInterface         = 0x00,
    },

    .CDC_Functional_IntHeader = {
        .bLength         = CDC_FUNCTIONAL_DESCRIPTOR_SIZE(2),
        .bDescriptorType = 0x24,
        .SubType         = 0x00,
        .Data            = {0x01, 0x10},
    },

    .CDC_Functional_CallManagement = {
        .bLength         = CDC_FUNCTIONAL_DESCRIPTOR_SIZE(2),
        .bDescriptorType = 0x24,
        .SubType         = 0x01,
        .Data            = {0x03, 0x01},
    },

    .CDC_Functional_ACM = {
        .bLength         = CDC_FUNCTIONAL_DESCRIPTOR_SIZE(1),
        .bDescriptorType = 0x24,
        .SubType         = 0x02,
        .Data            = {0x06},
    },

    .CDC_Functional_Union = {
        .bLength         = CDC_FUNCTIONAL_DESCRIPTOR_SIZE(2),
        .bDescriptorType = 0x24,
        .SubType         = 0x06,
        .Data            = {0x00, 0x01},
    },

    .ManagementEndpoint = {
        .bLength          = sizeof(USB_Descriptor_Endpoint),
        .bDescriptorType  = USB_DESCRIPTOR_TYPE_ENDPOINT,
        .bEndpointAddress = (USB_DESCRIPTOR_ENDPOINT_IN |
                             VCOM_NOTIFICATION_EPNUM),
        .bmAttributes     = EP_TYPE_INTERRUPT,
        .wMaxPacketSize   = VCOM_NOTIFICATION_EPSIZE,
        .bInterval        = 0xFF,
    },

    .DCI_Interface = {
        .bLength            = sizeof(USB_Descriptor_Interface),
        .bDescriptorType    = USB_DESCRIPTOR_TYPE_INTERFACE,
        .bInterfaceNumber   = 0x01,
        .bAlternateSetting  = 0x00,
        .bNumEndpoints      = 0x02,
        .bInterfaceClass    = USB_INTERFACE_CLASS_DIC,
        .bInterfaceSubClass = 0x00, /* None */
        .bInterfaceProtocol = 0x00, /* None */
        .iInterface         = 0x00,
    },

    .DataOutEndpoint = {
        .bLength          = sizeof(USB_Descriptor_Endpoint),
        .bDescriptorType  = USB_DESCRIPTOR_TYPE_ENDPOINT,
        .bEndpointAddress = (USB_DESCRIPTOR_ENDPOINT_OUT | VCOM_RX_EPNUM),
        .bmAttributes     = EP_TYPE_BULK,
        .wMaxPacketSize   = VCOM_RX_EPSIZE,
        .bInterval        = 0x00,
    },

    .DataInEndpoint = {
        .bLength          = sizeof(USB_Descriptor_Endpoint),
        .bDescriptorType  = USB_DESCRIPTOR_TYPE_ENDPOINT,
        .bEndpointAddress = (USB_DESCRIPTOR_ENDPOINT_IN | VCOM_TX_EPNUM),
        .bmAttributes     = EP_TYPE_BULK,
        .wMaxPacketSize   = VCOM_TX_EPSIZE,
        .bInterval        = 0x00,
    },
};

/*
  String Identifiers:

  we may choose to specify any or none of the following string
  identifiers:

  iManufacturer:    LeafLabs
  iProduct:         Maple
  iSerialNumber:    NONE
  iConfiguration:   NONE
  iInterface(CCI):  NONE
  iInterface(DCI):  NONE

  additionally we must provide the unicode language identifier,
  which is 0x0409 for US English
*/

const uint8 usbVcomDescriptor_LangID[USB_DESCRIPTOR_STRING_LEN(1)] = {
    USB_DESCRIPTOR_STRING_LEN(1),
    USB_DESCRIPTOR_TYPE_STRING,
    0x09,
    0x04,
};

const uint8 usbVcomDescriptor_iManufacturer[USB_DESCRIPTOR_STRING_LEN(8)] = {
    USB_DESCRIPTOR_STRING_LEN(8),
    USB_DESCRIPTOR_TYPE_STRING,
    'L', 0, 'e', 0, 'a', 0, 'f', 0,
    'L', 0, 'a', 0, 'b', 0, 's', 0,
};

const uint8 usbVcomDescriptor_iProduct[USB_DESCRIPTOR_STRING_LEN(8)] = {
    USB_DESCRIPTOR_STRING_LEN(8),
    USB_DESCRIPTOR_TYPE_STRING,
    'M', 0, 'a', 0, 'p', 0, 'l', 0,
    'e', 0, ' ', 0, ' ', 0, ' ', 0
};

ONE_DESCRIPTOR Device_Descriptor = {
    (uint8*)&usbVcomDescriptor_Device,
    sizeof(USB_Descriptor_Device)
};

ONE_DESCRIPTOR Config_Descriptor = {
    (uint8*)&usbVcomDescriptor_Config,
    sizeof(USB_Descriptor_Config)
};

ONE_DESCRIPTOR String_Descriptor[3] = {
    {(uint8*)&usbVcomDescriptor_LangID,       USB_DESCRIPTOR_STRING_LEN(1)},
    {(uint8*)&usbVcomDescriptor_iManufacturer,USB_DESCRIPTOR_STRING_LEN(8)},
    {(uint8*)&usbVcomDescriptor_iProduct,     USB_DESCRIPTOR_STRING_LEN(8)}
};

/*
 * Etc.
 */

typedef enum {
  DTR_UNSET,
  DTR_HIGH,
  DTR_NEGEDGE,
  DTR_LOW
} RESET_STATE;

typedef struct {
  uint32 bitrate;
  uint8  format;
  uint8  paritytype;
  uint8  datatype;
} USB_Line_Coding;

uint8 last_request = 0;
USB_Line_Coding line_coding = {
    .bitrate = 115200,
    .format = 0x00, /* stop bits-1 */
    .paritytype = 0x00,
    .datatype = 0x08
};
uint8 vcomBufferRx[VCOM_RX_BUFLEN];
volatile uint32 countTx    = 0;
volatile uint32 recvBufIn  = 0;
volatile uint32 recvBufOut = 0;
volatile uint32 maxNewBytes   = VCOM_RX_BUFLEN;
volatile uint32 newBytes = 0;
RESET_STATE reset_state = DTR_UNSET;
uint8       line_dtr_rts = 0;

/*
 * Endpoint callbacks
 */

static void (*ep_int_in[7])(void) =
    {vcomDataTxCb,
     NOP_Process,
     NOP_Process,
     NOP_Process,
     NOP_Process,
     NOP_Process,
     NOP_Process};

static void (*ep_int_out[7])(void) =
    {NOP_Process,
     NOP_Process,
     vcomDataRxCb,
     NOP_Process,
     NOP_Process,
     NOP_Process,
     NOP_Process};

/*
 * Globals required by usb_lib/
 */

#define NUM_ENDPTS                0x04
DEVICE Device_Table = {
    .Total_Endpoint      = NUM_ENDPTS,
    .Total_Configuration = 1
};

#define MAX_PACKET_SIZE            0x40  /* 64B, maximum for USB FS Devices */
DEVICE_PROP Device_Property = {
    .Init                        = usbInit,
    .Reset                       = usbReset,
    .Process_Status_IN           = NOP_Process,
    .Process_Status_OUT          = NOP_Process,
    .Class_Data_Setup            = usbDataSetup,
    .Class_NoData_Setup          = usbNoDataSetup,
    .Class_Get_Interface_Setting = usbGetInterfaceSetting,
    .GetDeviceDescriptor         = usbGetDeviceDescriptor,
    .GetConfigDescriptor         = usbGetConfigDescriptor,
    .GetStringDescriptor         = usbGetStringDescriptor,
    .RxEP_buffer                 = NULL,
    .MaxPacketSize               = MAX_PACKET_SIZE
};

USER_STANDARD_REQUESTS User_Standard_Requests = {
    .User_GetConfiguration   = NOP_Process,
    .User_SetConfiguration   = usbSetConfiguration,
    .User_GetInterface       = NOP_Process,
    .User_SetInterface       = NOP_Process,
    .User_GetStatus          = NOP_Process,
    .User_ClearFeature       = NOP_Process,
    .User_SetEndPointFeature = NOP_Process,
    .User_SetDeviceFeature   = NOP_Process,
    .User_SetDeviceAddress   = usbSetDeviceAddress
};

/*
 * CDC ACM interface
 */

void usb_cdcacm_enable(gpio_dev *disc_dev, uint8 disc_bit) {
    /* Present ourselves to the host */
    gpio_set_mode(disc_dev, disc_bit, GPIO_OUTPUT_PP);
    gpio_write_bit(disc_dev, disc_bit, 0); // presents us to the host

    /* initialize USB peripheral */
    usb_init_usblib(USBLIB, ep_int_in, ep_int_out);
}

void usb_cdcacm_disable(gpio_dev *disc_dev, uint8 disc_bit) {
    // These are just guesses about how to do this, but it seems to work.
    // TODO: verify this with USB spec
    nvic_irq_disable(NVIC_USB_LP_CAN_RX0);
    gpio_write_bit(disc_dev, disc_bit, 1);
}

void usb_cdcacm_putc(char ch) {
    while (!usb_cdcacm_tx((uint8*)&ch, 1))
        ;
}

/* This function is non-blocking.
 *
 * It copies data from a usercode buffer into the USB peripheral TX
 * buffer and return the number placed in that buffer.
 */
uint32 usb_cdcacm_tx(const uint8* buf, uint32 len) {
    /* Last transmission hasn't finished, abort */
    if (countTx) {
        return 0;
    }

    // We can only put VCOM_TX_EPSIZE bytes in the buffer
    /* FIXME then why are we only copying half as many? */
    if (len > VCOM_TX_EPSIZE / 2) {
        len = VCOM_TX_EPSIZE / 2;
    }

    // Try to load some bytes if we can
    if (len) {
        usb_copy_to_pma(buf, len, VCOM_TX_ADDR);
        usb_set_ep_tx_count(VCOM_TX_ENDP, len);
        countTx += len;
        usb_set_ep_tx_stat(VCOM_TX_ENDP, USB_EP_STAT_TX_VALID);
    }

    return len;
}

/* returns the number of available bytes are in the recv FIFO */
uint32 usb_cdcacm_data_available(void) {
    return newBytes;
}

uint16 usb_cdcacm_get_pending() {
    return countTx;
}

/* Nonblocking byte receive.
 *
 * Copies up to len bytes from our private data buffer (*NOT* the PMA)
 * into buf and deq's the FIFO. */
uint32 usb_cdcacm_rx(uint8* buf, uint32 len) {
    static int offset = 0;
    int i;

    if (len > newBytes) {
        len = newBytes;
    }

    for (i = 0; i < len; i++) {
        buf[i] = vcomBufferRx[i + offset];
    }

    newBytes -= len;
    offset += len;

    /* Re-enable the RX endpoint, which we had set to receive 0 bytes */
    if (newBytes == 0) {
        usb_set_ep_rx_count(VCOM_RX_ENDP, VCOM_RX_EPSIZE);
        usb_set_ep_rx_stat(VCOM_RX_ENDP, USB_EP_STAT_RX_VALID);
        offset = 0;
    }

    return len;
}

uint8 usb_cdcacm_get_dtr() {
    return ((line_dtr_rts & CONTROL_LINE_DTR) != 0);
}

uint8 usb_cdcacm_get_rts() {
    return ((line_dtr_rts & CONTROL_LINE_RTS) != 0);
}

/*
 * Callbacks
 */

static void vcomDataTxCb(void) {
    /* assumes tx transactions are atomic 64 bytes (nearly certain they are) */
    countTx = 0;
}

#define EXC_RETURN 0xFFFFFFF9
#define DEFAULT_CPSR 0x61000000
static void vcomDataRxCb(void) {
    /* FIXME this is mad buggy */

    /* setEPRxCount on the previous cycle should garuntee
       we havnt received more bytes than we can fit */
    newBytes = usb_get_ep_rx_count(VCOM_RX_ENDP);
    usb_set_ep_rx_stat(VCOM_RX_ENDP, USB_EP_STAT_RX_NAK);

    /* magic number, {0x31, 0x45, 0x41, 0x46} is "1EAF" */
    uint8 chkBuf[4];
    uint8 cmpBuf[4] = {0x31, 0x45, 0x41, 0x46};
    if (reset_state == DTR_NEGEDGE) {
        reset_state = DTR_LOW;

        if  (newBytes >= 4) {
            unsigned int target = (unsigned int)wait_reset | 0x1;

            usb_copy_from_pma(chkBuf, 4, VCOM_RX_ADDR);

            int i;
            USB_Bool cmpMatch = TRUE;
            for (i = 0; i < 4; i++) {
                if (chkBuf[i] != cmpBuf[i]) {
                    cmpMatch = FALSE;
                }
            }

            if (cmpMatch) {
                asm volatile("mov r0, %[stack_top]      \n\t" // Reset stack
                             "mov sp, r0                \n\t"
                             "mov r0, #1                \n\t"
                             "mov r1, %[target_addr]    \n\t"
                             "mov r2, %[cpsr]           \n\t"
                             "push {r2}                 \n\t" // Fake xPSR
                             "push {r1}                 \n\t" // PC target addr
                             "push {r0}                 \n\t" // Fake LR
                             "push {r0}                 \n\t" // Fake R12
                             "push {r0}                 \n\t" // Fake R3
                             "push {r0}                 \n\t" // Fake R2
                             "push {r0}                 \n\t" // Fake R1
                             "push {r0}                 \n\t" // Fake R0
                             "mov lr, %[exc_return]     \n\t"
                             "bx lr"
                             :
                             : [stack_top] "r" (STACK_TOP),
                               [target_addr] "r" (target),
                               [exc_return] "r" (EXC_RETURN),
                               [cpsr] "r" (DEFAULT_CPSR)
                             : "r0", "r1", "r2");
                /* should never get here */
            }
        }
    }

    usb_copy_from_pma(vcomBufferRx, newBytes, VCOM_RX_ADDR);
}

static uint8* vcomGetSetLineCoding(uint16 length) {
    if (length == 0) {
        pInformation->Ctrl_Info.Usb_wLength = sizeof(USB_Line_Coding);
    }
    return (uint8*)&line_coding;
}

static void usbInit(void) {
    pInformation->Current_Configuration = 0;

    USB_BASE->CNTR = USB_CNTR_FRES;

    USBLIB->irq_mask = 0;
    USB_BASE->CNTR = USBLIB->irq_mask;
    USB_BASE->ISTR = 0;
    USBLIB->irq_mask = USB_CNTR_RESETM | USB_CNTR_SUSPM | USB_CNTR_WKUPM;
    USB_BASE->CNTR = USBLIB->irq_mask;

    USB_BASE->ISTR = 0;
    USBLIB->irq_mask = USB_ISR_MSK;
    USB_BASE->CNTR = USBLIB->irq_mask;

    nvic_irq_enable(NVIC_USB_LP_CAN_RX0);
    USBLIB->state = USB_UNCONNECTED;
}

/* choose addresses to give endpoints the max 64 byte buffers */
#define BTABLE_ADDRESS        0x00
static void usbReset(void) {
    pInformation->Current_Configuration = 0;

    /* current feature is current bmAttributes */
    pInformation->Current_Feature = (USB_CONFIG_ATTR_BUSPOWERED |
                                     USB_CONFIG_ATTR_SELF_POWERED);

    USB_BASE->BTABLE = BTABLE_ADDRESS;

    /* setup control endpoint 0 */
    usb_set_ep_type(USB_EP0, USB_EP_EP_TYPE_CONTROL);
    usb_set_ep_tx_stat(USB_EP0, USB_EP_STAT_TX_STALL);
    usb_set_ep_rx_addr(USB_EP0, VCOM_CTRL_RX_ADDR);
    usb_set_ep_tx_addr(USB_EP0, VCOM_CTRL_TX_ADDR);
    usb_clear_status_out(USB_EP0);

    usb_set_ep_rx_count(USB_EP0, pProperty->MaxPacketSize);
    usb_set_ep_rx_stat(USB_EP0, USB_EP_STAT_RX_VALID);

    /* setup management endpoint 1  */
    usb_set_ep_type(VCOM_NOTIFICATION_ENDP, USB_EP_EP_TYPE_INTERRUPT);
    usb_set_ep_tx_addr(VCOM_NOTIFICATION_ENDP, VCOM_NOTIFICATION_ADDR);
    usb_set_ep_tx_stat(VCOM_NOTIFICATION_ENDP, USB_EP_STAT_TX_NAK);
    usb_set_ep_rx_stat(VCOM_NOTIFICATION_ENDP, USB_EP_STAT_RX_DISABLED);

    /* TODO figure out differences in style between RX/TX EP setup */

    /* set up data endpoint OUT (RX) */
    usb_set_ep_type(VCOM_RX_ENDP, USB_EP_EP_TYPE_BULK);
    usb_set_ep_rx_addr(VCOM_RX_ENDP, 0x110);
    usb_set_ep_rx_count(VCOM_RX_ENDP, 64);
    usb_set_ep_rx_stat(VCOM_RX_ENDP, USB_EP_STAT_RX_VALID);

    /* set up data endpoint IN (TX)  */
    usb_set_ep_type(VCOM_TX_ENDP, USB_EP_EP_TYPE_BULK);
    usb_set_ep_tx_addr(VCOM_TX_ENDP, VCOM_TX_ADDR);
    usb_set_ep_tx_stat(VCOM_TX_ENDP, USB_EP_STAT_TX_NAK);
    usb_set_ep_rx_stat(VCOM_TX_ENDP, USB_EP_STAT_RX_DISABLED);

    USBLIB->state = USB_ATTACHED;
    SetDeviceAddress(0);

    /* reset the rx fifo */
    recvBufIn   = 0;
    recvBufOut  = 0;
    maxNewBytes = VCOM_RX_EPSIZE;
    countTx     = 0;
}

static RESULT usbDataSetup(uint8 request) {
    uint8 *(*CopyRoutine)(uint16);
    CopyRoutine = NULL;

    if (Type_Recipient == (CLASS_REQUEST | INTERFACE_RECIPIENT)) {
        switch (request) {
        case (GET_LINE_CODING):
            CopyRoutine = vcomGetSetLineCoding;
            last_request = GET_LINE_CODING;
            break;
        case (SET_LINE_CODING):
            CopyRoutine = vcomGetSetLineCoding;
            last_request = SET_LINE_CODING;
            break;
        default:
            break;
        }
    }

    if (CopyRoutine == NULL) {
        return USB_UNSUPPORT;
    }

    pInformation->Ctrl_Info.CopyData = CopyRoutine;
    pInformation->Ctrl_Info.Usb_wOffset = 0;
    (*CopyRoutine)(0);
    return USB_SUCCESS;
}

static RESULT usbNoDataSetup(uint8 request) {
    uint8 new_signal;

    /* we support set com feature but dont handle it */
    if (Type_Recipient == (CLASS_REQUEST | INTERFACE_RECIPIENT)) {

        switch (request) {
        case (SET_COMM_FEATURE):
            return USB_SUCCESS;
        case (SET_CONTROL_LINE_STATE):
            /* to reset the board, pull both dtr and rts low
               then pulse dtr by itself */
            new_signal = (pInformation->USBwValues.bw.bb0 &
                          (CONTROL_LINE_DTR | CONTROL_LINE_RTS));
            line_dtr_rts = new_signal & 0x03;

            switch (reset_state) {
                /* no default, covered enum */
            case DTR_UNSET:
                if ((new_signal & CONTROL_LINE_DTR) == 0 ) {
                    reset_state = DTR_LOW;
                } else {
                    reset_state = DTR_HIGH;
                }
                break;

            case DTR_HIGH:
                if ((new_signal & CONTROL_LINE_DTR) == 0 ) {
                    reset_state = DTR_NEGEDGE;
                } else {
                    reset_state = DTR_HIGH;
                }
                break;

            case DTR_NEGEDGE:
                if ((new_signal & CONTROL_LINE_DTR) == 0 ) {
                    reset_state = DTR_LOW;
                } else {
                    reset_state = DTR_HIGH;
                }
                break;

            case DTR_LOW:
                if ((new_signal & CONTROL_LINE_DTR) == 0 ) {
                    reset_state = DTR_LOW;
                } else {
                    reset_state = DTR_HIGH;
                }
                break;
            }

            return USB_SUCCESS;
        }
    }
    return USB_UNSUPPORT;
}

static RESULT usbGetInterfaceSetting(uint8 interface, uint8 alt_setting) {
    if (alt_setting > 0) {
        return USB_UNSUPPORT;
    } else if (interface > 1) {
        return USB_UNSUPPORT;
    }

    return USB_SUCCESS;
}

static uint8* usbGetDeviceDescriptor(uint16 length) {
    return Standard_GetDescriptorData(length, &Device_Descriptor);
}

static uint8* usbGetConfigDescriptor(uint16 length) {
    return Standard_GetDescriptorData(length, &Config_Descriptor);
}

static uint8* usbGetStringDescriptor(uint16 length) {
    uint8 wValue0 = pInformation->USBwValue0;

    if (wValue0 > 2) {
        return NULL;
    }
    return Standard_GetDescriptorData(length, &String_Descriptor[wValue0]);
}

static void usbSetConfiguration(void) {
    if (pInformation->Current_Configuration != 0) {
        USBLIB->state = USB_CONFIGURED;
    }
}

static void usbSetDeviceAddress(void) {
    USBLIB->state = USB_ADDRESSED;
}

#define RESET_DELAY                     100000
static void wait_reset(void) {
  delay_us(RESET_DELAY);
  nvic_sys_reset();
}