1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
|
/******************************************************************************
* The MIT License
*
* Copyright (c) 2012 LeafLabs, LLC.
* Copyright (c) 2010 Perry Hung.
*
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy,
* modify, merge, publish, distribute, sublicense, and/or sell copies
* of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*****************************************************************************/
/**
* @file libmaple/stm32f1/usart.c
* @author Marti Bolivar <mbolivar@leaflabs.com>,
* Perry Hung <perry@leaflabs.com>
* @brief STM32F1 USART.
*/
#include <libmaple/usart.h>
#include <libmaple/gpio.h>
#include "usart_private.h"
/*
* Devices
*/
static ring_buffer usart1_rb;
static usart_dev usart1 = {
.regs = USART1_BASE,
.rb = &usart1_rb,
.max_baud = 4500000UL,
.clk_id = RCC_USART1,
.irq_num = NVIC_USART1,
};
/** USART1 device */
usart_dev *USART1 = &usart1;
static ring_buffer usart2_rb;
static usart_dev usart2 = {
.regs = USART2_BASE,
.rb = &usart2_rb,
.max_baud = 2250000UL,
.clk_id = RCC_USART2,
.irq_num = NVIC_USART2,
};
/** USART2 device */
usart_dev *USART2 = &usart2;
static ring_buffer usart3_rb;
static usart_dev usart3 = {
.regs = USART3_BASE,
.rb = &usart3_rb,
.max_baud = 2250000UL,
.clk_id = RCC_USART3,
.irq_num = NVIC_USART3,
};
/** USART3 device */
usart_dev *USART3 = &usart3;
#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY)
static ring_buffer uart4_rb;
static usart_dev uart4 = {
.regs = UART4_BASE,
.rb = &uart4_rb,
.max_baud = 2250000UL,
.clk_id = RCC_UART4,
.irq_num = NVIC_UART4,
};
/** UART4 device */
usart_dev *UART4 = &uart4;
static ring_buffer uart5_rb;
static usart_dev uart5 = {
.regs = UART5_BASE,
.rb = &uart5_rb,
.max_baud = 2250000UL,
.clk_id = RCC_UART5,
.irq_num = NVIC_UART5,
};
/** UART5 device */
usart_dev *UART5 = &uart5;
#endif
/*
* Routines
*/
void usart_config_gpios_async(usart_dev *udev,
gpio_dev *rx_dev, uint8 rx,
gpio_dev *tx_dev, uint8 tx,
unsigned flags) {
gpio_set_mode(rx_dev, rx, GPIO_INPUT_FLOATING);
gpio_set_mode(tx_dev, tx, GPIO_AF_OUTPUT_PP);
}
void usart_set_baud_rate(usart_dev *dev, uint32 clock_speed, uint32 baud) {
uint32 integer_part;
uint32 fractional_part;
uint32 tmp;
/* Figure out the clock speed, if the user doesn't give one. */
if (clock_speed == 0) {
clock_speed = _usart_clock_freq(dev);
}
ASSERT(clock_speed);
/* Convert desired baud rate to baud rate register setting. */
integer_part = (25 * clock_speed) / (4 * baud);
tmp = (integer_part / 100) << 4;
fractional_part = integer_part - (100 * (tmp >> 4));
tmp |= (((fractional_part * 16) + 50) / 100) & ((uint8)0x0F);
dev->regs->BRR = (uint16)tmp;
}
/**
* @brief Call a function on each USART.
* @param fn Function to call.
*/
void usart_foreach(void (*fn)(usart_dev*)) {
fn(USART1);
fn(USART2);
fn(USART3);
#ifdef STM32_HIGH_DENSITY
fn(UART4);
fn(UART5);
#endif
}
/*
* Interrupt handlers.
*/
void __irq_usart1(void) {
usart_irq(&usart1_rb, USART1_BASE);
}
void __irq_usart2(void) {
usart_irq(&usart2_rb, USART2_BASE);
}
void __irq_usart3(void) {
usart_irq(&usart3_rb, USART3_BASE);
}
#ifdef STM32_HIGH_DENSITY
void __irq_uart4(void) {
usart_irq(&uart4_rb, UART4_BASE);
}
void __irq_uart5(void) {
usart_irq(&uart5_rb, UART5_BASE);
}
#endif
|
