1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
|
/* *****************************************************************************
* The MIT License
*
* Copyright (c) 2010 Perry Hung.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
* ****************************************************************************/
/**
* @brief libmaple serial peripheral interface (SPI) definitions
*
* Initial implementation for the SPI interface.
*
* This driver implements only the bare essentials of a polling driver at the
* moment. Master mode only, 8-bit data frames, and polling.
*
* The caller is responsible for controlling the chip select line.
*
* TODO: interrupt based driver, DMA.
*
*/
#include "libmaple.h"
#include "gpio.h"
#include "rcc.h"
#include "spi.h"
typedef struct spi_dev {
SPI *base;
GPIO_Port *port;
uint8 sck_pin;
uint8 miso_pin;
uint8 mosi_pin;
} spi_dev;
static const spi_dev spi_dev1 = {
.base = (SPI*)SPI1_BASE,
.port = GPIOA_BASE,
.sck_pin = 5,
.miso_pin = 6,
.mosi_pin = 7
};
static const spi_dev spi_dev2 = {
.base = (SPI*)SPI2_BASE,
.port = GPIOB_BASE,
.sck_pin = 13,
.miso_pin = 14,
.mosi_pin = 15
};
static void spi_gpio_cfg(spi_dev *dev);
/**
* @brief Initialize a spi peripheral
* @param spi_num which spi to turn on, SPI1 or SPI2?
* @param prescale prescale factor on the input clock.
* @param endian data frame format (LSBFIRST?)
* @param mode SPI mode number
*/
void spi_init(uint32 spi_num,
uint32 prescale,
uint32 endian,
uint32 mode) {
ASSERT(spi_num == 1 || spi_num == 2);
ASSERT(mode < 4);
SPI *spi;
uint32 cr1 = 0;
switch (spi_num) {
case 1:
/* limit to 18 mhz max speed */
ASSERT(prescale != CR1_BR_PRESCALE_2);
spi = (SPI*)SPI1_BASE;
rcc_enable_clk_spi1();
spi_gpio_cfg(&spi_dev1);
break;
case 2:
spi = (SPI*)SPI2_BASE;
rcc_enable_clk_spi2();
spi_gpio_cfg(&spi_dev2);
break;
}
cr1 = prescale | endian | mode | CR1_MSTR | CR1_SSI | CR1_SSM;
spi->CR1 = cr1;
/* Peripheral enable */
spi->CR1 |= CR1_SPE;
}
/**
* @brief SPI synchronous 8-bit write, blocking.
* @param spi_num which spi to send on
* @return data shifted back from the slave
*/
void spi_tx(uint32 spi_num, uint8 data) {
SPI *spi;
ASSERT(spi_num == 1 || spi_num == 2);
spi = (spi_num == 1) ? (SPI*)SPI1_BASE : (SPI*)SPI2_BASE;
spi->DR = data;
while (!(spi->SR & SR_TXE) || (spi->SR & SR_BSY))
;
}
static void spi_gpio_cfg(spi_dev *dev) {
gpio_set_mode(dev->port, dev->sck_pin, GPIO_MODE_AF_OUTPUT_PP);
gpio_set_mode(dev->port, dev->miso_pin, GPIO_MODE_AF_OUTPUT_PP);
gpio_set_mode(dev->port, dev->mosi_pin, GPIO_MODE_AF_OUTPUT_PP);
}
|