1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
|
/******************************************************************************
* The MIT License
*
* Copyright (c) 2010 Perry Hung.
*
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy,
* modify, merge, publish, distribute, sublicense, and/or sell copies
* of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*****************************************************************************/
/**
* @brief Implements pretty much only the basic clock setup on the
* stm32, clock enable/disable and peripheral reset commands.
*/
#include "libmaple.h"
#include "flash.h"
#include "rcc.h"
#include "bitband.h"
#define APB1 RCC_APB1
#define APB2 RCC_APB2
#define AHB RCC_AHB
struct rcc_dev_info {
const rcc_clk_domain clk_domain;
const uint8 line_num;
};
/* Device descriptor table, maps rcc_clk_id onto bus and enable/reset
* register bit numbers. */
static const struct rcc_dev_info rcc_dev_table[] = {
[RCC_GPIOA] = { .clk_domain = APB2, .line_num = 2 },
[RCC_GPIOB] = { .clk_domain = APB2, .line_num = 3 },
[RCC_GPIOC] = { .clk_domain = APB2, .line_num = 4 },
[RCC_GPIOD] = { .clk_domain = APB2, .line_num = 5 },
[RCC_AFIO] = { .clk_domain = APB2, .line_num = 0 },
[RCC_ADC1] = { .clk_domain = APB2, .line_num = 9 },
[RCC_ADC2] = { .clk_domain = APB2, .line_num = 10 },
[RCC_ADC3] = { .clk_domain = APB2, .line_num = 15 },
[RCC_USART1] = { .clk_domain = APB2, .line_num = 14 },
[RCC_USART2] = { .clk_domain = APB1, .line_num = 17 },
[RCC_USART3] = { .clk_domain = APB1, .line_num = 18 },
[RCC_TIMER1] = { .clk_domain = APB2, .line_num = 11 },
[RCC_TIMER2] = { .clk_domain = APB1, .line_num = 0 },
[RCC_TIMER3] = { .clk_domain = APB1, .line_num = 1 },
[RCC_TIMER4] = { .clk_domain = APB1, .line_num = 2 },
[RCC_SPI1] = { .clk_domain = APB2, .line_num = 12 },
[RCC_SPI2] = { .clk_domain = APB1, .line_num = 14 },
[RCC_DMA1] = { .clk_domain = AHB, .line_num = 0 },
[RCC_PWR] = { .clk_domain = APB1, .line_num = 28},
[RCC_BKP] = { .clk_domain = APB1, .line_num = 27},
[RCC_I2C1] = { .clk_domain = APB1, .line_num = 21 },
[RCC_I2C2] = { .clk_domain = APB1, .line_num = 22 },
[RCC_CRC] = { .clk_domain = AHB, .line_num = 6},
[RCC_FLITF] = { .clk_domain = AHB, .line_num = 4},
[RCC_SRAM] = { .clk_domain = AHB, .line_num = 2},
#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY)
[RCC_GPIOE] = { .clk_domain = APB2, .line_num = 6 },
[RCC_GPIOF] = { .clk_domain = APB2, .line_num = 7 },
[RCC_GPIOG] = { .clk_domain = APB2, .line_num = 8 },
[RCC_UART4] = { .clk_domain = APB1, .line_num = 19 },
[RCC_UART5] = { .clk_domain = APB1, .line_num = 20 },
[RCC_TIMER5] = { .clk_domain = APB1, .line_num = 3 },
[RCC_TIMER6] = { .clk_domain = APB1, .line_num = 4 },
[RCC_TIMER7] = { .clk_domain = APB1, .line_num = 5 },
[RCC_TIMER8] = { .clk_domain = APB2, .line_num = 13 },
[RCC_FSMC] = { .clk_domain = AHB, .line_num = 8 },
[RCC_DAC] = { .clk_domain = APB1, .line_num = 29 },
[RCC_DMA2] = { .clk_domain = AHB, .line_num = 1 },
[RCC_SDIO] = { .clk_domain = AHB, .line_num = 10 },
[RCC_SPI3] = { .clk_domain = APB1, .line_num = 15 },
#endif
#ifdef STM32_XL_DENSITY
[RCC_TIMER9] = { .clk_domain = APB2, .line_num = 19 },
[RCC_TIMER10] = { .clk_domain = APB2, .line_num = 20 },
[RCC_TIMER11] = { .clk_domain = APB2, .line_num = 21 },
[RCC_TIMER12] = { .clk_domain = APB1, .line_num = 6 },
[RCC_TIMER13] = { .clk_domain = APB1, .line_num = 7 },
[RCC_TIMER14] = { .clk_domain = APB1, .line_num = 8 },
#endif
};
/**
* @brief Initialize the clock control system. Initializes the system
* clock source to use the PLL driven by an external oscillator
* @param sysclk_src system clock source, must be PLL
* @param pll_src pll clock source, must be HSE
* @param pll_mul pll multiplier
*/
void rcc_clk_init(rcc_sysclk_src sysclk_src,
rcc_pllsrc pll_src,
rcc_pll_multiplier pll_mul) {
uint32 cfgr = 0;
uint32 cr;
/* Assume that we're going to clock the chip off the PLL, fed by
* the HSE */
ASSERT(sysclk_src == RCC_CLKSRC_PLL &&
pll_src == RCC_PLLSRC_HSE);
RCC_BASE->CFGR = pll_src | pll_mul;
/* Turn on the HSE */
cr = RCC_BASE->CR;
cr |= RCC_CR_HSEON;
RCC_BASE->CR = cr;
while (!(RCC_BASE->CR & RCC_CR_HSERDY))
;
/* Now the PLL */
cr |= RCC_CR_PLLON;
RCC_BASE->CR = cr;
while (!(RCC_BASE->CR & RCC_CR_PLLRDY))
;
/* Finally, let's switch over to the PLL */
cfgr &= ~RCC_CFGR_SW;
cfgr |= RCC_CFGR_SW_PLL;
RCC_BASE->CFGR = cfgr;
while ((RCC_BASE->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_PLL)
;
}
/**
* @brief Turn on the clock line on a device
* @param device Clock ID of the device to turn on.
*/
void rcc_clk_enable(rcc_clk_id device) {
static const __io uint32* enable_regs[] = {
[APB1] = &RCC_BASE->APB1ENR,
[APB2] = &RCC_BASE->APB2ENR,
[AHB] = &RCC_BASE->AHBENR,
};
rcc_clk_domain clk_domain = rcc_dev_clk(device);
__io uint32* enr = (__io uint32*)enable_regs[clk_domain];
uint8 lnum = rcc_dev_table[device].line_num;
bb_peri_set_bit(enr, lnum, 1);
}
/**
* @brief reset a device
* @param device Clock ID of the device to reset.
*/
void rcc_reset_dev(rcc_clk_id device) {
static const __io uint32* reset_regs[] = {
[APB1] = &RCC_BASE->APB1RSTR,
[APB2] = &RCC_BASE->APB2RSTR,
};
rcc_clk_domain clk_domain = rcc_dev_clk(device);
__io void* addr = (__io void*)reset_regs[clk_domain];
uint8 lnum = rcc_dev_table[device].line_num;
bb_peri_set_bit(addr, lnum, 1);
bb_peri_set_bit(addr, lnum, 0);
}
/**
* @brief Get a device's clock domain
* @param device Device whose clock domain to return
* @return Device's clock source
*/
rcc_clk_domain rcc_dev_clk(rcc_clk_id device) {
return rcc_dev_table[device].clk_domain;
}
/**
* @brief Set the divider on a device prescaler
* @param prescaler prescaler to set
* @param divider prescaler divider
*/
void rcc_set_prescaler(rcc_prescaler prescaler, uint32 divider) {
static const uint32 masks[] = {
[RCC_PRESCALER_AHB] = RCC_CFGR_HPRE,
[RCC_PRESCALER_APB1] = RCC_CFGR_PPRE1,
[RCC_PRESCALER_APB2] = RCC_CFGR_PPRE2,
[RCC_PRESCALER_USB] = RCC_CFGR_USBPRE,
[RCC_PRESCALER_ADC] = RCC_CFGR_ADCPRE,
};
uint32 cfgr = RCC_BASE->CFGR;
cfgr &= ~masks[prescaler];
cfgr |= divider;
RCC_BASE->CFGR = cfgr;
}
|
