aboutsummaryrefslogtreecommitdiffstats
path: root/libmaple/i2c.h
blob: 4c60ad713ea514bc38ffe73b4eddc641ee66e1cb (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
/******************************************************************************
 * The MIT License
 *
 * Copyright (c) 2010 Perry Hung.
 *
 * Permission is hereby granted, free of charge, to any person
 * obtaining a copy of this software and associated documentation
 * files (the "Software"), to deal in the Software without
 * restriction, including without limitation the rights to use, copy,
 * modify, merge, publish, distribute, sublicense, and/or sell copies
 * of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be
 * included in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 *****************************************************************************/

/**
 * @file i2c.h
 * @brief Inter-Integrated Circuit (I2C) peripheral support
 */

#include "libmaple_types.h"
#include "rcc.h"
#include "nvic.h"
#include "gpio.h"

#ifndef _I2C_H_
#define _I2C_H_

/** I2C register map type */
typedef struct i2c_reg_map {
    __io uint32 CR1;            /**< Control register 1 */
    __io uint32 CR2;            /**< Control register 2 */
    __io uint32 OAR1;           /**< Own address register 1 */
    __io uint32 OAR2;           /**< Own address register 2 */
    __io uint32 DR;             /**< Data register */
    __io uint32 SR1;            /**< Status register 1 */
    __io uint32 SR2;            /**< Status register 2 */
    __io uint32 CCR;            /**< Clock control register */
    __io uint32 TRISE;          /**< TRISE (rise time) register */
} i2c_reg_map;

/** I2C device states */
typedef enum i2c_state {
    I2C_STATE_DISABLED          = 0, /**< Disabled */
    I2C_STATE_IDLE              = 1, /**< Idle */
    I2C_STATE_XFER_DONE         = 2, /**< Done with transfer */
    I2C_STATE_BUSY              = 3, /**< Busy */
    I2C_STATE_ERROR             = -1 /**< Error occurred */
} i2c_state;

/**
 * @brief I2C message type
 */
typedef struct i2c_msg {
    uint16 addr;                /**< Address */
#define I2C_MSG_READ            0x1
#define I2C_MSG_10BIT_ADDR      0x2
    uint16 flags;               /**< Bitwise OR of I2C_MSG_READ and
                                     I2C_MSG_10BIT_ADDR */
    uint16 length;              /**< Message length */
    uint16 xferred;             /**< Messages transferred */
    uint8 *data;                /**< Data */
} i2c_msg;

/**
 * @brief I2C device type.
 */
typedef struct i2c_dev {
    i2c_reg_map *regs;          /**< Register map */
    gpio_dev *gpio_port;        /**< SDA, SCL pins' GPIO port */
    uint8 sda_pin;              /**< SDA bit on gpio_port */
    uint8 scl_pin;              /**< SCL bit on gpio_port */
    rcc_clk_id clk_id;          /**< RCC clock information */
    nvic_irq_num ev_nvic_line;  /**< Event IRQ number */
    nvic_irq_num er_nvic_line;  /**< Error IRQ number */
    volatile i2c_state state;   /**< Device state */
    uint16 msgs_left;           /**< Messages left */
    i2c_msg *msg;               /**< Messages */
    volatile uint32 timestamp;  /**< For internal use */
    uint32 error_flags;         /**< Error flags, set on I2C error condition */
} i2c_dev;

/*
 * Devices
 */

extern i2c_dev* const I2C1;
extern i2c_dev* const I2C2;

/*
 * Register map base pointers
 */

/** I2C1 register map base pointer */
#define I2C1_BASE               ((struct i2c_reg_map*)0x40005400)
/** I2C2 register map base pointer */
#define I2C2_BASE               ((struct i2c_reg_map*)0x40005800)

/*
 * Register bit definitions
 */

/* Control register 1 */

#define I2C_CR1_SWRST           BIT(15)       // Software reset
#define I2C_CR1_ALERT           BIT(13)       // SMBus alert
#define I2C_CR1_PEC             BIT(12)       // Packet error checking
#define I2C_CR1_POS             BIT(11)       // Acknowledge/PEC position
#define I2C_CR1_ACK             BIT(10)       // Acknowledge enable
#define I2C_CR1_START           BIT(8)        // Start generation
#define I2C_CR1_STOP            BIT(9)        // Stop generation
#define I2C_CR1_PE              BIT(0)        // Peripheral Enable

/* Control register 2 */

#define I2C_CR2_LAST            BIT(12)       // DMA last transfer
#define I2C_CR2_DMAEN           BIT(11)       // DMA requests enable
#define I2C_CR2_ITBUFEN         BIT(10)       // Buffer interrupt enable
#define I2C_CR2_ITEVTEN         BIT(9)        // Event interupt enable
#define I2C_CR2_ITERREN         BIT(8)        // Error interupt enable
#define I2C_CR2_FREQ            0xFFF         // Peripheral input frequency

/* Clock control register */

#define I2C_CCR_FS              BIT(15)       // Fast mode selection
#define I2C_CCR_DUTY            BIT(14)       // 16/9 duty ratio
#define I2C_CCR_CCR             0xFFF         // Clock control bits

/* Status register 1 */

#define I2C_SR1_SB              BIT(0)        // Start bit
#define I2C_SR1_ADDR            BIT(1)        // Address sent/matched
#define I2C_SR1_BTF             BIT(2)        // Byte transfer finished
#define I2C_SR1_ADD10           BIT(3)        // 10-bit header sent
#define I2C_SR1_STOPF           BIT(4)        // Stop detection
#define I2C_SR1_RXNE            BIT(6)        // Data register not empty
#define I2C_SR1_TXE             BIT(7)        // Data register empty
#define I2C_SR1_BERR            BIT(8)        // Bus error
#define I2C_SR1_ARLO            BIT(9)        // Arbitration lost
#define I2C_SR1_AF              BIT(10)       // Acknowledge failure
#define I2C_SR1_OVR             BIT(11)       // Overrun/underrun
#define I2C_SR1_PECERR          BIT(12)       // PEC Error in reception
#define I2C_SR1_TIMEOUT         BIT(14)       // Timeout or Tlow error
#define I2C_SR1_SMBALERT        BIT(15)       // SMBus alert

/* Status register 2 */

#define I2C_SR2_MSL             BIT(0)        // Master/slave
#define I2C_SR2_BUSY            BIT(1)        // Bus busy
#define I2C_SR2_TRA             BIT(2)        // Transmitter/receiver
#define I2C_SR2_GENCALL         BIT(4)        // General call address
#define I2C_SR2_SMBDEFAULT      BIT(5)        // SMBus device default address
#define I2C_SR2_SMBHOST         BIT(6)        // SMBus host header
#define I2C_SR2_DUALF           BIT(7)        // Dual flag
#define I2C_SR2_PEC             0xFF00        // Packet error checking register

/*
 * Convenience routines
 */

#ifdef __cplusplus
extern "C" {
#endif

void i2c_init(i2c_dev *dev);

/* I2C enable options */
#define I2C_FAST_MODE           BIT(0)      // 400 khz
#define I2C_DUTY_16_9           BIT(1)      // 16/9 duty ratio
#define I2C_REMAP               BIT(2)      // Use alternate pin mapping
#define I2C_BUS_RESET           BIT(3)      // Perform a bus reset
void i2c_master_enable(i2c_dev *dev, uint32 flags);

#define I2C_ERROR_PROTOCOL      (-1)
#define I2C_ERROR_TIMEOUT       (-2)
int32 i2c_master_xfer(i2c_dev *dev, i2c_msg *msgs, uint16 num, uint32 timeout);

void i2c_bus_reset(const i2c_dev *dev);

/**
 * @brief Disable an I2C device
 *
 * This function disables the corresponding peripheral and marks dev's
 * state as I2C_STATE_DISABLED.
 *
 * @param dev Device to disable.
 */
static inline void i2c_disable(i2c_dev *dev) {
    dev->regs->CR1 &= ~I2C_CR1_PE;
    dev->state = I2C_STATE_DISABLED;
}

/**
 * @brief Turn on an I2C peripheral
 * @param dev Device to enable
 */
static inline void i2c_peripheral_enable(i2c_dev *dev) {
    dev->regs->CR1 |= I2C_CR1_PE;
}

/**
 * @brief Turn off an I2C peripheral
 * @param dev Device to turn off
 */
static inline void i2c_peripheral_disable(i2c_dev *dev) {
    dev->regs->CR1 &= ~I2C_CR1_PE;
}

/**
 * @brief Fill transmit register
 * @param dev I2C device
 * @param byte Byte to write
 */
static inline void i2c_write(i2c_dev *dev, uint8 byte) {
    dev->regs->DR = byte;
}

/**
 * @brief Set input clock frequency, in MHz
 * @param dev I2C device
 * @param freq Frequency in megahertz (2-36)
 */
static inline void i2c_set_input_clk(i2c_dev *dev, uint32 freq) {
    uint32 cr2 = dev->regs->CR2;
    cr2 &= ~I2C_CR2_FREQ;
    cr2 |= freq;
    dev->regs->CR2 = freq;
}

/**
 * @brief Set I2C clock control register. See RM008
 * @param dev I2C device
 * @param val Value to use for clock control register (in
 *            Fast/Standard mode)
 */
static inline void i2c_set_clk_control(i2c_dev *dev, uint32 val) {
    uint32 ccr = dev->regs->CCR;
    ccr &= ~I2C_CCR_CCR;
    ccr |= val;
    dev->regs->CCR = ccr;
}


/**
 * @brief Set SCL rise time
 * @param dev I2C device
 * @param trise Maximum rise time in fast/standard mode (see RM0008
 *              for relevant formula).
 */
static inline void i2c_set_trise(i2c_dev *dev, uint32 trise) {
    dev->regs->TRISE = trise;
}


/**
 * @brief Generate a start condition on the bus.
 * @param dev I2C device
 */
static inline void i2c_start_condition(i2c_dev *dev) {
    uint32 cr1;
    while ((cr1 = dev->regs->CR1) & (I2C_CR1_START |
                                     I2C_CR1_STOP  |
                                     I2C_CR1_PEC)) {
        ;
    }
    dev->regs->CR1 |= I2C_CR1_START;
}

/**
 * @brief Generate a stop condition on the bus
 * @param dev I2C device
 */
static inline void i2c_stop_condition(i2c_dev *dev) {
    uint32 cr1;
    while ((cr1 = dev->regs->CR1) & (I2C_CR1_START |
                                     I2C_CR1_STOP  |
                                     I2C_CR1_PEC)) {
        ;
    }
    dev->regs->CR1 |= I2C_CR1_STOP;
    while ((cr1 = dev->regs->CR1) & (I2C_CR1_START |
                                     I2C_CR1_STOP  |
                                     I2C_CR1_PEC)) {
        ;
    }

}

/**
 * @brief Enable one or more I2C interrupts
 * @param dev I2C device
 * @param irqs Bitwise or of:
 *             I2C_IRQ_ERROR (error interrupt),
 *             I2C_IRQ_EVENT (event interrupt), and
 *             I2C_IRQ_BUFFER (buffer interrupt).
 */
#define I2C_IRQ_ERROR              I2C_CR2_ITERREN
#define I2C_IRQ_EVENT              I2C_CR2_ITEVTEN
#define I2C_IRQ_BUFFER             I2C_CR2_ITBUFEN
static inline void i2c_enable_irq(i2c_dev *dev, uint32 irqs) {
    dev->regs->CR2 |= irqs;
}

/**
 * @brief Disable one or more I2C interrupts
 * @param dev I2C device
 * @param irqs Bitwise or of:
 *             I2C_IRQ_ERROR (error interrupt),
 *             I2C_IRQ_EVENT (event interrupt), and
 *             I2C_IRQ_BUFFER (buffer interrupt).
 */
static inline void i2c_disable_irq(i2c_dev *dev, uint32 irqs) {
    dev->regs->CR2 &= ~irqs;
}


/**
 * @brief Enable I2C acknowledgment
 * @param dev I2C device
 */
static inline void i2c_enable_ack(i2c_dev *dev) {
    dev->regs->CR1 |= I2C_CR1_ACK;
}

/**
 * @brief Disable I2C acknowledgment
 * @param dev I2C device
 */
static inline void i2c_disable_ack(i2c_dev *dev) {
    dev->regs->CR1 &= ~I2C_CR1_ACK;
}

#ifdef __cplusplus
}
#endif

#endif