aboutsummaryrefslogtreecommitdiffstats
path: root/docs/source/arduino/shiftout.rst
blob: 3815dc55e7b28e20be624f25534423a32194a69e (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
.. _arduino-shiftout:

shiftOut()
==========

Description
-----------

Shifts out a byte of data one bit at a time. Starts from either the
most (i.e. the leftmost) or least (rightmost) significant bit. Each
bit is written in turn to a data pin, after which a clock pin is
pulsed to indicate that the bit is available.



This is a software implementation; Arduino (as of 0019) also
provides an `SPI library <http://arduino.cc/en/Reference/SPI>`_
that uses the hardware implementation.



Syntax
------

shiftOut(dataPin, clockPin, bitOrder, value)



Parameters
----------

dataPin: the pin on which to output each bit (*int*)



clockPin: the pin to toggle once the **dataPin** has been set to
the correct value (*int*)



bitOrder: which order to shift out the bits; either **MSBFIRST** or
**LSBFIRST**.
(Most Significant Bit First, or, Least Significant Bit First)



value: the data to shift out. (*byte*)



Returns
-------

None



Note
----

The **dataPin** and **clockPin** must already be configured as
outputs by a call to
`pinMode <http://arduino.cc/en/Reference/PinMode>`_\ ().



**shiftOut** is currently written to output 1 byte (8 bits) so it
requires a two step operation to output values larger than 255.

::

    // Do this for MSBFIRST serial
    int data = 500;
    // shift out highbyte
    shiftOut(dataPin, clock, MSBFIRST, (data >> 8));  
    // shift out lowbyte
    shiftOut(data, clock, MSBFIRST, data);
    
    // Or do this for LSBFIRST serial
    data = 500;
    // shift out lowbyte
    shiftOut(dataPin, clock, LSBFIRST, data);  
    // shift out highbyte 
    shiftOut(dataPin, clock, LSBFIRST, (data >> 8)); 



Example
-------

*For accompanying circuit, see the `tutorial on controlling a 74HC595 shift register <http://arduino.cc/en/Tutorial/ShiftOut>`_.*



::

    //**************************************************************//
    //  Name    : shiftOutCode, Hello World                         //
    //  Author  : Carlyn Maw,Tom Igoe                               //
    //  Date    : 25 Oct, 2006                                      //
    //  Version : 1.0                                               //
    //  Notes   : Code for using a 74HC595 Shift Register           //
    //          : to count from 0 to 255                            //
    //****************************************************************
    
    //Pin connected to ST_CP of 74HC595
    int latchPin = 8;
    //Pin connected to SH_CP of 74HC595
    int clockPin = 12;
    ////Pin connected to DS of 74HC595
    int dataPin = 11;
    
    void setup() {
      //set pins to output because they are addressed in the main loop
      pinMode(latchPin, OUTPUT);
      pinMode(clockPin, OUTPUT);
      pinMode(dataPin, OUTPUT);
    }
    
    void loop() {
      //count up routine
      for (int j = 0; j < 256; j++) {
        //ground latchPin and hold low for as long as you are transmitting
        digitalWrite(latchPin, LOW);
        shiftOut(dataPin, clockPin, LSBFIRST, j);   
        //return the latch pin high to signal chip that it 
        //no longer needs to listen for information
        digitalWrite(latchPin, HIGH);
        delay(1000);
      }
    } 




.. include:: cc-attribution.txt