1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
|
.. highlight:: cpp
.. _arduino-compatibility:
=============================
Maple-Arduino Compatibility
=============================
.. contents:: Contents
:local:
Overview
--------
The biggest difference between the Maple and most Arduino boards is
that the Maple uses a 32-bit ARM Cortex-M3 architecture chip, while
the Arduinos have 8-bit Atmel AVR chips. The different instruction set
means that machine code (which makes up executable binary programs) is
incompatible between the two, and a different compiler (actually just
a different version of `gcc <http://gcc.gnu.org/>`_) is required.
The compiler for the regular Arduino IDE is the popular `avr-gcc
<http://www.nongnu.org/avr-libc/>`_ package; the compiler for the
Maple version of the IDE is CodeSourcery's edition of gcc for the ARM
EABI target (:command:`arm-non-eabi-gcc`). A (preliminary) reference
on :ref:`using arm-none-eabi-gcc <arm-gcc>` is available.
The bitwidth of the processor means that the Maple can process 32-bit
operations (like adding or multiplying two 32-bit integers) in a
single instruction, while an Arduino processor would have to split up
large operations into several smaller ones. In a lot of cases 8-bit
operations are plenty (integers 0-255, single characters of text,
etc.), but if you're dealing with higher resolution data, the speed up
could be significant.
A trade-off is that code could be larger as well; program instructions
and memory locations can be up to 32 bits each. However, removal of
extra instructions and fancy packing together of simple instructions
means that programs aren't much larger (or are even smaller).
Header Numbering and Incompatibilities
--------------------------------------
.. FIXME [Maple-specific values]
The numbering of headers is different; on the Maple each GPIO has a
unique number: 0, 1, 2, all the way up to 37 (actually, there are
:ref:`a few more <lang-disabledebugports>`...). On the Arduino, the
analog pins are numbered separately (A0-A5) from the digital pins (D0\
-D13).
The incompatible hardware differences are:
* :ref:`I2C <i2c>` **port**: on most Arduinos, the |i2c| port is Analog
Input 4 (SDA) and Analog Input 5 (SCL); on the Maple, |i2c| port 1
is D5 (SCL) and D9 (SDA), and |i2c| port 2 is D29 (SCL) and D30
(SDA).
It should be possible to skywire, sacrificing signal quality (due to
increased capacitance). Alternatively, |i2c| can be bit-banged
reasonably well in software. This peripheral could potentially be
rerouted internally, but we haven't looked into it.
* :ref:`PWM <pwm>` **on D10**: all the other standard Arduino PWM
headers have PWM functionality on the Maple (D2,D3,D6,D9,D11), but
not D10.
* **No External Voltage Reference**: The Arduino has an AREF pin which
allows the use of an external ADC voltage reference; the Maple has
an extra GPIO pin (D14) with PWM capability in this spot, and does
not allow an external voltage reference to be configured.
* **EEPROM**: the Maple does not have any internal EEPROM. This
functionality can be emulated with regular persistent flash memory,
or with an external EEPROM chip.
* **ISP Programming**: the Maple does not use an ISP/ICSP bus for
debugging; it uses :ref:`JTAG <jtag>`.
Software Language/Library Changes
---------------------------------
With :ref:`a few exceptions <language-missing-features>`, the entire
Wiring/Arduino language is supported. However, there are some subtle
differences, most of which are improvements:
* **32-bit integers**: many standard functions either expect or return
full 32-bit (4 byte) integer values instead of the regular 16-bit (2
byte) Arduino values.
* **64-bit doubles**: The :ref:`double <lang-double>` type is a full
double-precision floating point type on the Maple; it is a
single-precision floating point value on the Arduino.
* :ref:`pinMode() <lang-pinmode>` **types**: any :ref:`GPIO <gpio>`
(including analog pins) can be configured into one of the following
modes with a single call to ``pinMode()``: ``OUTPUT``,
``OUTPUT_OPEN_DRAIN``, ``INPUT_FLOATING``, ``INPUT_PULLUP``,
``INPUT_PULLDOWN``. Additionally, the PWM pins (labeled "PWM" on the
silkscreen) can be configured in ``PWM`` and ``PWM_OPEN_DRAIN``
modes, and the analog input pins (labeled "AIN") can be configured
in ``INPUT_ANALOG`` mode. See the :ref:`GPIO documentation <gpio>`
for more information.
* :ref:`Serial port <lang-serial>` **syntax**: like the `Arduino Mega
<http://arduino.cc/en/Main/ArduinoBoardMega>`_, the Maple has
multiple :ref:`USART ports <lang-serial>`. By default, ``Serial``
is not mapped to any of them. Use ``Serial1`` through ``Serial3``
instead.
* **16-bit** :ref:`PWM <pwm>`: Arduino boards support 8-bit PWM, which
means that calls to :ref:`analogWrite() <lang-analogwrite>` take
values between 0 (always off) and 255 (always on). The Maple
supports 16-bit PWM, so the corresponding values should be between 0
(always off) and 65535 (always on).
* **12-bit** :ref:`ADC <adc>`: Arduino boards support 10-bit ADC, which
means that calls to :ref:`analogRead() <lang-analogread>` will
return values between 0 and 1023. The Maple supports 12-bit ADC, so
the same call will instead return values between 0 and 4095.
Shield and Device Compatibility
-------------------------------
**Can't find your shield?** Check out the `Compatible Shields
<http://wiki.leaflabs.com/index.php?title=Compatible_Shields>`_ page
on our wiki.
.. list-table::
:header-rows: 1
* - Shield/Device
- Compatible?
- Notes
* - Ethernet shield
- Yes!
- Tested; no library yet
* - WiFi Shield
- Yes!
- Tested; preliminary library support
* - MIDI shield
- Yes!
- Tested; no library yet
* - XBee shield
- Unknown
-
* - Bluetooth shield
- Unknown
- Some Bluetooth <-> UART boards have been tested and are known
to work.
* - Cellular shield
- Unknown
-
Library Porting Status
----------------------
The state of currently ported Arduino libraries is the
:ref:`libraries`.
.. TODO Update as libraries are ported.
.. list-table::
:header-rows: 1
* - Library
- Ported?
- Notes
* - Wire
- Preliminary
- In progress; see :ref:`library reference <libraries-wire>`.
* - LiquidCrystal
- **Yes**
- :ref:`Included since IDE 0.0.7 <libraries-liquid-crystal>`
* - Ethernet
- Not yet
- Planned
* - EEPROM
- (Unsupported) third-party emulation
- The Maple doesn't have EEPROM; it uses flash instead. There is
an `EEPROM emulation library
<http://akb77.com/g/stm32/maple-eeprom-emulation-library/>`_ by
`x893 <http://akb77.com/g/>`_, but we haven't tested it.
* - Firmata
- Not yet
- Planned
* - Matrix
- Not yet
- Planned
* - Servo
- **Yes**
- :ref:`Included since IDE 0.0.9 <libraries-servo>`
* - SoftwareSerial
- Not yet
- Planned
* - Sprite
- Not yet
- Planned
* - Stepper
- Not yet
- Planned
Sketch and Library Porting HOWTO
--------------------------------
In addition to the suggestions in this section, you may find many of
the individual :ref:`language reference <language>` pages useful. As
appropriate, these have "Arduino Compatibility" sections; one good
example is the :ref:`analogWrite() <lang-analogwrite-compatibility>`
function.
- Check the hardware and header differences above, and see if your
project or shield needs to be modified (eg, add 3.3V level
converters or reroute PWM to header D10).
- Check for ported library functionality. We intend to port all of the
core and popular libraries (like Wire, Ethernet, and the LCD screen
driver), but this task is not yet finished. (:ref:`Patches are
welcome! <libmaple-contributing>`).
- Check for peripheral conflicts; changing the configuration of timers
and bus speeds for a feature on one header may impact all the
features on that hardware "port". For example, changing the timer
prescaler to do long PWM pulses could impact |i2c| communications on
nearby headers.
- Rewrite any low-level code. This could potentially be very
difficult, but hopefully you've used the Arduino libraries to
abstract away the registers and other hardware-specific
details. Your sketch probably doesn't have any low-level code; a
library which wraps a particular peripheral very well may. Some
help is available in the :ref:`arm-gcc` reference.
- Redeclare variable sizes if necessary: generics like ``int`` will
probably work unless you depend on side-effects like rollover.
- Check every ``pinMode()``: the Maple has more modes for GPIO
pins. For example, make sure to set analog pins to ``INPUT_ANALOG``
before reading and PWM pins to ``PWM`` before writing. The full set
of pin modes is documented in the :ref:`lang-pinmode` reference.
- Modify PWM writes: ``pinMode()`` must be set to ``PWM``, the
frequency of the PWM pulse configured, and the duty cycle written
with up to 16-bit resolution.
- Modify ADC reads: :ref:`lang-analogread` takes the full pin number
(not 0-5) and returns a full 12-bit reading. The ADC pin must have
its ``pinMode()`` set to ``INPUT_ANALOG``.
- Possibly convert all Serial-over-USB communications to use
:ref:`lang-serialusb` instead of a USART :ref:`serial port
<lang-serial>`. The Maple has a dedicated USB port which is not
connected to the USART TX/RX pins in any way.
- Check timing: Maple clock cycles are just 13.9 nanoseconds, though
the peripheral bus speeds (which limit GPIO output) are clocked
slower.
|
