1 files changed, 0 insertions, 102 deletions
diff --git a/wirish/boards/nucleo/include/board/board.h b/wirish/boards/nucleo/include/board/board.h
deleted file mode 100644
index f7e3a38..0000000
--- a/wirish/boards/nucleo/include/board/board.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/******************************************************************************
- * The MIT License
- *
- * Copyright (c) 2011 LeafLabs, LLC.
- *
- * Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use, copy,
- * modify, merge, publish, distribute, sublicense, and/or sell copies
- * of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- *****************************************************************************/
-
-/**
- * @file   wirish/boards/maple/include/board/board.h
- * @author Marti Bolivar <mbolivar@leaflabs.com>
- * @brief  Maple board header.
- */
-
-#ifndef _BOARD_MAPLE_H_
-#define _BOARD_MAPLE_H_
-
-/**
- * If you solder an external oscillator, you may run the board at 72mhz,
- * else, we keep it at 36mhz for simplicity and stability
- */
-#define CYCLES_PER_MICROSECOND  36
-
-/* Pin number for the built-in button. */
-#define BOARD_BUTTON_PIN        27
-
-/* Pin number for the built-in LED. */
-#define BOARD_LED_PIN           13
-
-/* Number of USARTs/UARTs whose pins are broken out to headers. */
-#define BOARD_NR_USARTS         3
-
-/* USART pin numbers. */
-#define BOARD_USART1_TX_PIN     7
-#define BOARD_USART1_RX_PIN     8
-#define BOARD_USART2_TX_PIN     1
-#define BOARD_USART2_RX_PIN     0
-#define BOARD_USART3_TX_PIN     29
-#define BOARD_USART3_RX_PIN     30
-
-/* Number of SPI ports broken out to headers. */
-#define BOARD_NR_SPI            2
-
-/* SPI pin numbers. */
-#define BOARD_SPI1_NSS_PIN      10
-#define BOARD_SPI1_MOSI_PIN     11
-#define BOARD_SPI1_MISO_PIN     12
-#define BOARD_SPI1_SCK_PIN      13
-#define BOARD_SPI2_NSS_PIN      31
-#define BOARD_SPI2_MOSI_PIN     34
-#define BOARD_SPI2_MISO_PIN     33
-#define BOARD_SPI2_SCK_PIN      32
-
-/* Total number of GPIO pins that are broken out to headers and
- * intended for use. This includes pins like the LED, button, and
- * debug port (JTAG/SWD) pins. */
-#define BOARD_NR_GPIO_PINS      44
-
-/* Number of pins capable of PWM output. */
-#define BOARD_NR_PWM_PINS       8
-
-/* Number of pins capable of ADC conversion. */
-#define BOARD_NR_ADC_PINS       6
-
-/* Number of pins already connected to external hardware.  For Maple,
- * these are just BOARD_LED_PIN, BOARD_BUTTON_PIN, and the debug port
- * pins (see below). */
-#define BOARD_NR_USED_PINS       2
-
-/**
- * Note: there is no USB in this board.
- */
-
-/* Pin aliases: these give the GPIO port/bit for each pin as an
- * enum. These are optional, but recommended. They make it easier to
- * write code using low-level GPIO functionality. */
-enum {
-    PA3, PA2, PA0, PA1, PB5, PB6, PA8, PA9, PA10, PB7, PA4, PA7, PA6, PA5, PB8,
-    PC0, PC1, PC2, PC3, PC4, PC5, PC13, PC14, PC15, PB9, PD2, PC10, PB0, PB1,
-    PB10, PB11, PB12, PB13, PB14, PB15, PC6, PC7, PC8, PC9, PA13, PA14, PA15,
-    PB3, PB4
-};
-
-#endif