aboutsummaryrefslogtreecommitdiffstats
path: root/wirish/HardwareSerial.cpp
diff options
context:
space:
mode:
Diffstat (limited to 'wirish/HardwareSerial.cpp')
-rw-r--r--wirish/HardwareSerial.cpp134
1 files changed, 134 insertions, 0 deletions
diff --git a/wirish/HardwareSerial.cpp b/wirish/HardwareSerial.cpp
new file mode 100644
index 0000000..e78156d
--- /dev/null
+++ b/wirish/HardwareSerial.cpp
@@ -0,0 +1,134 @@
+/******************************************************************************
+ * The MIT License
+ *
+ * Copyright (c) 2010 Perry Hung.
+ * Copyright (c) 2011, 2012 LeafLabs, LLC.
+ *
+ * Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy,
+ * modify, merge, publish, distribute, sublicense, and/or sell copies
+ * of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *****************************************************************************/
+
+/**
+ * @file wirish/HardwareSerial.cpp
+ * @brief Wirish serial port implementation.
+ */
+
+#include <wirish/HardwareSerial.h>
+
+#include <libmaple/libmaple.h>
+#include <libmaple/gpio.h>
+#include <libmaple/timer.h>
+#include <libmaple/usart.h>
+
+#define DEFINE_HWSERIAL(name, n) \
+ HardwareSerial name(USART##n, \
+ BOARD_USART##n##_TX_PIN, \
+ BOARD_USART##n##_RX_PIN)
+
+#if BOARD_HAVE_USART1
+DEFINE_HWSERIAL(Serial1, 1);
+#endif
+#if BOARD_HAVE_USART2
+DEFINE_HWSERIAL(Serial2, 2);
+#endif
+#if BOARD_HAVE_USART3
+DEFINE_HWSERIAL(Serial3, 3);
+#endif
+#if BOARD_HAVE_UART4
+DEFINE_HWSERIAL(Serial4, 4);
+#endif
+#if BOARD_HAVE_UART5
+DEFINE_HWSERIAL(Serial5, 5);
+#endif
+#if BOARD_HAVE_USART6
+DEFINE_HWSERIAL(Serial6, 6);
+#endif
+
+HardwareSerial::HardwareSerial(usart_dev *usart_device,
+ uint8 tx_pin,
+ uint8 rx_pin) {
+ this->usart_device = usart_device;
+ this->tx_pin = tx_pin;
+ this->rx_pin = rx_pin;
+}
+
+/*
+ * Set up/tear down
+ */
+
+#if STM32_MCU_SERIES == STM32_SERIES_F1
+/* F1 MCUs have no GPIO_AFR[HL], so turn off PWM if there's a conflict
+ * on this GPIO bit. */
+static void disable_timer_if_necessary(timer_dev *dev, uint8 ch) {
+ if (dev != NULL) {
+ timer_set_mode(dev, ch, TIMER_DISABLED);
+ }
+}
+#elif (STM32_MCU_SERIES == STM32_SERIES_F2) || \
+ (STM32_MCU_SERIES == STM32_SERIES_F4)
+#define disable_timer_if_necessary(dev, ch) ((void)0)
+#else
+#warning "Unsupported STM32 series; timer conflicts are possible"
+#endif
+
+void HardwareSerial::begin(uint32 baud) {
+ ASSERT(baud <= this->usart_device->max_baud);
+
+ if (baud > this->usart_device->max_baud) {
+ return;
+ }
+
+ const stm32_pin_info *txi = &PIN_MAP[this->tx_pin];
+ const stm32_pin_info *rxi = &PIN_MAP[this->rx_pin];
+
+ disable_timer_if_necessary(txi->timer_device, txi->timer_channel);
+
+ usart_config_gpios_async(this->usart_device,
+ rxi->gpio_device, rxi->gpio_bit,
+ txi->gpio_device, txi->gpio_bit,
+ 0);
+ usart_init(this->usart_device);
+ usart_set_baud_rate(this->usart_device, USART_USE_PCLK, baud);
+ usart_enable(this->usart_device);
+}
+
+void HardwareSerial::end(void) {
+ usart_disable(this->usart_device);
+}
+
+/*
+ * I/O
+ */
+
+uint8 HardwareSerial::read(void) {
+ return usart_getc(this->usart_device);
+}
+
+uint32 HardwareSerial::available(void) {
+ return usart_data_available(this->usart_device);
+}
+
+void HardwareSerial::write(unsigned char ch) {
+ usart_putc(this->usart_device, ch);
+}
+
+void HardwareSerial::flush(void) {
+ usart_reset_rx(this->usart_device);
+}