1 files changed, 0 insertions, 88 deletions
diff --git a/src/stm32lib/examples/USART/Synchronous/readme.txt b/src/stm32lib/examples/USART/Synchronous/readme.txt
deleted file mode 100755
index 1fb128c..0000000
--- a/src/stm32lib/examples/USART/Synchronous/readme.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : readme.txt
-* Author             : MCD Application Team
-* Version            : V2.0.1
-* Date               : 06/13/2008
-* Description        : Description of the USART Synchronous Example.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-Example description
-===================
-This example provides a basic communication between USART1 (Synchronous mode) 
-and SPI1 using flags.
-
-First, the USART1 sends data from TxBuffer1 buffer to SPI1 using USART1 TXE flag.
-Data received, using RXNE flag, by SPI1 is stored in RxBuffer2 then compared with
-the sent ones and the result of this comparison is stored in the "TransferStatus1" 
-variable.
- 
-Then, the SPI1 sends data from TxBuffer2 buffer to USART1 using SPI1 TXE flag.
-Data received, using RXNE flag, by USART1 is stored in RxBuffer1 then compared with
-the sent ones and the result of this comparison is stored in the "TransferStatus2" 
-variable.   
-
-
-USART1 configured as follow:
-  - BaudRate = 115200 baud  
-  - Word Length = 8 Bits
-  - One Stop Bit
-  - No parity
-  - Hardware flow control disabled (RTS and CTS signals)
-  - Receive and transmit enabled
-  - USART Clock enabled
-  - USART CPOL: Clock is active high
-  - USART CPHA: Data is captured on the second edge 
-  - USART LastBit: The clock pulse of the last data bit is output to the SCLK pin
-
-SPI1 configured as follow:
-  - Direction = 2 Lines FullDuplex
-  - Mode = Slave Mode
-  - DataSize = 8 Bits
-  - CPOL = Clock is active high
-  - CPHA = Data is captured on the second edge 
-  - NSS = NSS Software
-  - First Bit = First Bit is the LSB     
-
-
-Directory contents
-==================
-stm32f10x_conf.h  Library Configuration file
-stm32f10x_it.h    Interrupt handlers header file
-stm32f10x_it.c    Interrupt handlers
-main.c            Main program
-
-
-Hardware environment
-====================
-This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
-boards and can be easily tailored to any other hardware.
-There is no need for any modification when switching between these two boards.
-
-Connect USART1_Tx(PA.09) to SPI1_MOSI(PA.07), USART1_Rx(PA.10) to SPI1_MISO(PA.06)
-and USART1_CK(PA.08) to SPI1_SCK(PA.05).
- 
-  
-How to use it
-=============
-In order to make the program work, you must do the following :
-- Create a project and setup all your toolchain's start-up files
-- Compile the directory content files and required Library files :
-  + stm32f10x_lib.c
-  + stm32f10x_gpio.c
-  + stm32f10x_rcc.c
-  + stm32f10x_usart.c
-  + stm32f10x_spi.c
-  + stm32f10x_nvic.c
-  + stm32f10x_flash.c    
-
-- Link all compiled files and load your image into target memory
-- Run the example
-
-******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******