1 files changed, 0 insertions, 70 deletions
diff --git a/src/stm32lib/examples/TIM/DMA/readme.txt b/src/stm32lib/examples/TIM/DMA/readme.txt
deleted file mode 100755
index 8d0eb63..0000000
--- a/src/stm32lib/examples/TIM/DMA/readme.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : readme.txt
-* Author             : MCD Application Team
-* Version            : V2.0.1
-* Date               : 06/13/2008
-* Description        : Description of the TIM DMA example.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-Example description
-===================
-This example provides a description of how to use DMA with TIM1 Update request
-to transfer Data from memory to TIM1 Capture Compare Register3.
-
-TIM1CLK = 72 MHz, Prescaler = 0, TIM1 counter clock = 72 MHz 
-The TIM1 Channel3 is configured to generate a complementary PWM signal with 
-a frequency equal to: TIM1 counter clock / (TIM1_Period + 1) = 17.57 KHz
-
-The TIM1 Channel3 is configured to generate a complementary PWM signal with 
-a frequency equal to 17.578 KHz and a variable duty cycle that is changed 
-by the DMA after a specific number of Update event. 
-The number of this repetitive requests is defined by the TIM1 Repetion counter,
-each 3 Update Requests, the TIM1 Channel3 Duty Cycle changes to the next new value
-defined by the SRC_Buffer.
-
-
-Directory contents
-==================
-stm32f10x_conf.h  Library Configuration file
-stm32f10x_it.c    Interrupt handlers
-stm32f10x_it.h    Interrupt handlers header file
-main.c            Main program
- 
-
-Hardware environment
-====================
-This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
-boards and can be easily tailored to any other hardware.
-There is no need for any modification when switching between these two boards.
-
-Connect the pins 
-  - TIM1 CH3  (PA.10)
-  - TIM1 CH3N (PB.15)
-to an oscilloscope to monitor the different waveforms.
-   
-  
-How to use it
-=============
-In order to make the program work, you must do the following:
-- Create a project and setup all your toolchain's start-up files
-- Compile the directory content files and required Library files:
-  + stm32F10x_lib.c
-  + stm32F10x_tim.c
-  + stm32F10x_gpio.c
-  + stm32F10x_rcc.c
-  + stm32F10x_dma.c
-  + stm32F10x_nvic.c
-  + stm32F10x_flash.c
-
-- Link all compiled files and load your image into target memory
-- Run the example
-
-
-******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******