diff options
Diffstat (limited to 'src/stm32lib/examples/SDIO/sdcard.h')
| -rwxr-xr-x | src/stm32lib/examples/SDIO/sdcard.h | 252 |
1 files changed, 0 insertions, 252 deletions
diff --git a/src/stm32lib/examples/SDIO/sdcard.h b/src/stm32lib/examples/SDIO/sdcard.h deleted file mode 100755 index 8289dda..0000000 --- a/src/stm32lib/examples/SDIO/sdcard.h +++ /dev/null @@ -1,252 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name : sdcard.h
-* Author : MCD Application Team
-* Version : V2.0.1
-* Date : 06/13/2008
-* Description : This file contains all the functions prototypes for the
-* SD Card driver firmware library.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __SDCARD_H
-#define __SDCARD_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_lib.h"
-
-/* Exported types ------------------------------------------------------------*/
-typedef enum
-{
- /* SDIO specific error defines */
- SD_CMD_CRC_FAIL = (1), /* Command response received (but CRC check failed) */
- SD_DATA_CRC_FAIL = (2), /* Data bock sent/received (CRC check Failed) */
- SD_CMD_RSP_TIMEOUT = (3), /* Command response timeout */
- SD_DATA_TIMEOUT = (4), /* Data time out */
- SD_TX_UNDERRUN = (5), /* Transmit FIFO under-run */
- SD_RX_OVERRUN = (6), /* Receive FIFO over-run */
- SD_START_BIT_ERR = (7), /* Start bit not detected on all data signals in widE bus mode */
- SD_CMD_OUT_OF_RANGE = (8), /* CMD's argument was out of range.*/
- SD_ADDR_MISALIGNED = (9), /* Misaligned address */
- SD_BLOCK_LEN_ERR = (10), /* Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */
- SD_ERASE_SEQ_ERR = (11), /* An error in the sequence of erase command occurs.*/
- SD_BAD_ERASE_PARAM = (12), /* An Invalid selection for erase groups */
- SD_WRITE_PROT_VIOLATION = (13), /* Attempt to program a write protect block */
- SD_LOCK_UNLOCK_FAILED = (14), /* Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */
- SD_COM_CRC_FAILED = (15), /* CRC check of the previous command failed */
- SD_ILLEGAL_CMD = (16), /* Command is not legal for the card state */
- SD_CARD_ECC_FAILED = (17), /* Card internal ECC was applied but failed to correct the data */
- SD_CC_ERROR = (18), /* Internal card controller error */
- SD_GENERAL_UNKNOWN_ERROR = (19), /* General or Unknown error */
- SD_STREAM_READ_UNDERRUN = (20), /* The card could not sustain data transfer in stream read operation. */
- SD_STREAM_WRITE_OVERRUN = (21), /* The card could not sustain data programming in stream mode */
- SD_CID_CSD_OVERWRITE = (22), /* CID/CSD overwrite error */
- SD_WP_ERASE_SKIP = (23), /* only partial address space was erased */
- SD_CARD_ECC_DISABLED = (24), /* Command has been executed without using internal ECC */
- SD_ERASE_RESET = (25), /* Erase sequence was cleared before executing because an out of erase sequence command was received */
- SD_AKE_SEQ_ERROR = (26), /* Error in sequence of authentication. */
- SD_INVALID_VOLTRANGE = (27),
- SD_ADDR_OUT_OF_RANGE = (28),
- SD_SWITCH_ERROR = (29),
- SD_SDIO_DISABLED = (30),
- SD_SDIO_FUNCTION_BUSY = (31),
- SD_SDIO_FUNCTION_FAILED = (32),
- SD_SDIO_UNKNOWN_FUNCTION = (33),
-
- /* Standard error defines */
- SD_INTERNAL_ERROR,
- SD_NOT_CONFIGURED,
- SD_REQUEST_PENDING,
- SD_REQUEST_NOT_APPLICABLE,
- SD_INVALID_PARAMETER,
- SD_UNSUPPORTED_FEATURE,
- SD_UNSUPPORTED_HW,
- SD_ERROR,
- SD_OK,
-} SD_Error;
-
-/* SDIO Commands Index */
-#define SDIO_GO_IDLE_STATE ((u8)0)
-#define SDIO_SEND_OP_COND ((u8)1)
-#define SDIO_ALL_SEND_CID ((u8)2)
-#define SDIO_SET_REL_ADDR ((u8)3) /* SDIO_SEND_REL_ADDR for SD Card */
-#define SDIO_SET_DSR ((u8)4)
-#define SDIO_SDIO_SEN_OP_COND ((u8)5)
-#define SDIO_HS_SWITCH ((u8)6)
-#define SDIO_SEL_DESEL_CARD ((u8)7)
-#define SDIO_HS_SEND_EXT_CSD ((u8)8)
-#define SDIO_SEND_CSD ((u8)9)
-#define SDIO_SEND_CID ((u8)10)
-#define SDIO_READ_DAT_UNTIL_STOP ((u8)11) /* SD Card doesn't support it */
-#define SDIO_STOP_TRANSMISSION ((u8)12)
-#define SDIO_SEND_STATUS ((u8)13)
-#define SDIO_HS_BUSTEST_READ ((u8)14)
-#define SDIO_GO_INACTIVE_STATE ((u8)15)
-#define SDIO_SET_BLOCKLEN ((u8)16)
-#define SDIO_READ_SINGLE_BLOCK ((u8)17)
-#define SDIO_READ_MULT_BLOCK ((u8)18)
-#define SDIO_HS_BUSTEST_WRITE ((u8)19)
-#define SDIO_WRITE_DAT_UNTIL_STOP ((u8)20) /* SD Card doesn't support it */
-#define SDIO_SET_BLOCK_COUNT ((u8)23) /* SD Card doesn't support it */
-#define SDIO_WRITE_SINGLE_BLOCK ((u8)24)
-#define SDIO_WRITE_MULT_BLOCK ((u8)25)
-#define SDIO_PROG_CID ((u8)26) /* reserved for manufacturers */
-#define SDIO_PROG_CSD ((u8)27)
-#define SDIO_SET_WRITE_PROT ((u8)28)
-#define SDIO_CLR_WRITE_PROT ((u8)29)
-#define SDIO_SEND_WRITE_PROT ((u8)30)
-#define SDIO_SD_ERASE_GRP_START ((u8)32) /* To set the address of the first write
- block to be erased. (For SD card only) */
-#define SDIO_SD_ERASE_GRP_END ((u8)33) /* To set the address of the last write block of the
- continuous range to be erased. (For SD card only) */
-#define SDIO_ERASE_GRP_START ((u8)35) /* To set the address of the first write block to be erased.
- (For MMC card only spec 3.31) */
-
-#define SDIO_ERASE_GRP_END ((u8)36) /* To set the address of the last write block of the
- continuous range to be erased. (For MMC card only spec 3.31) */
-
-#define SDIO_ERASE ((u8)38)
-#define SDIO_FAST_IO ((u8)39) /* SD Card doesn't support it */
-#define SDIO_GO_IRQ_STATE ((u8)40) /* SD Card doesn't support it */
-#define SDIO_LOCK_UNLOCK ((u8)42)
-#define SDIO_APP_CMD ((u8)55)
-#define SDIO_GEN_CMD ((u8)56)
-#define SDIO_NO_CMD ((u8)64)
-
-/* Following commands are SD Card Specific commands.
- SDIO_APP_CMD should be sent before sending these
- commands. */
-#define SDIO_APP_SD_SET_BUSWIDTH ((u8)6) /* For SD Card only */
-#define SDIO_SD_APP_STAUS ((u8)13) /* For SD Card only */
-#define SDIO_SD_APP_SEND_NUM_WRITE_BLOCKS ((u8)22) /* For SD Card only */
-#define SDIO_SD_APP_OP_COND ((u8)41) /* For SD Card only */
-#define SDIO_SD_APP_SET_CLR_CARD_DETECT ((u8)42) /* For SD Card only */
-#define SDIO_SD_APP_SEND_SCR ((u8)51) /* For SD Card only */
-#define SDIO_SDIO_RW_DIRECT ((u8)52) /* For SD I/O Card only */
-#define SDIO_SDIO_RW_EXTENDED ((u8)53) /* For SD I/O Card only */
-
-/* Following commands are SD Card Specific security commands.
- SDIO_APP_CMD should be sent before sending these commands. */
-#define SDIO_SD_APP_GET_MKB ((u8)43) /* For SD Card only */
-#define SDIO_SD_APP_GET_MID ((u8)44) /* For SD Card only */
-#define SDIO_SD_APP_SET_CER_RN1 ((u8)45) /* For SD Card only */
-#define SDIO_SD_APP_GET_CER_RN2 ((u8)46) /* For SD Card only */
-#define SDIO_SD_APP_SET_CER_RES2 ((u8)47) /* For SD Card only */
-#define SDIO_SD_APP_GET_CER_RES1 ((u8)48) /* For SD Card only */
-#define SDIO_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((u8)18) /* For SD Card only */
-#define SDIO_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((u8)25) /* For SD Card only */
-#define SDIO_SD_APP_SECURE_ERASE ((u8)38) /* For SD Card only */
-#define SDIO_SD_APP_CHANGE_SECURE_AREA ((u8)49) /* For SD Card only */
-#define SDIO_SD_APP_SECURE_WRITE_MKB ((u8)48) /* For SD Card only */
-
-typedef enum
-{
- SD_NO_TRANSFER = 0,
- SD_TRANSFER_IN_PROGRESS
-} SDTransferState;
-
-typedef struct
-{
- u16 TransferredBytes;
- SD_Error TransferError;
- u8 padding;
-} SDLastTransferInfo;
-
-typedef struct /* Card Specific Data */
-{
- vu8 CSDStruct; /* CSD structure */
- vu8 SysSpecVersion; /* System specification version */
- vu8 Reserved1; /* Reserved */
- vu8 TAAC; /* Data read access-time 1 */
- vu8 NSAC; /* Data read access-time 2 in CLK cycles */
- vu8 MaxBusClkFrec; /* Max. bus clock frequency */
- vu16 CardComdClasses; /* Card command classes */
- vu8 RdBlockLen; /* Max. read data block length */
- vu8 PartBlockRead; /* Partial blocks for read allowed */
- vu8 WrBlockMisalign; /* Write block misalignment */
- vu8 RdBlockMisalign; /* Read block misalignment */
- vu8 DSRImpl; /* DSR implemented */
- vu8 Reserved2; /* Reserved */
- vu16 DeviceSize; /* Device Size */
- vu8 MaxRdCurrentVDDMin; /* Max. read current @ VDD min */
- vu8 MaxRdCurrentVDDMax; /* Max. read current @ VDD max */
- vu8 MaxWrCurrentVDDMin; /* Max. write current @ VDD min */
- vu8 MaxWrCurrentVDDMax; /* Max. write current @ VDD max */
- vu8 DeviceSizeMul; /* Device size multiplier */
- vu8 EraseGrSize; /* Erase group size */
- vu8 EraseGrMul; /* Erase group size multiplier */
- vu8 WrProtectGrSize; /* Write protect group size */
- vu8 WrProtectGrEnable; /* Write protect group enable */
- vu8 ManDeflECC; /* Manufacturer default ECC */
- vu8 WrSpeedFact; /* Write speed factor */
- vu8 MaxWrBlockLen; /* Max. write data block length */
- vu8 WriteBlockPaPartial; /* Partial blocks for write allowed */
- vu8 Reserved3; /* Reserded */
- vu8 ContentProtectAppli; /* Content protection application */
- vu8 FileFormatGrouop; /* File format group */
- vu8 CopyFlag; /* Copy flag (OTP) */
- vu8 PermWrProtect; /* Permanent write protection */
- vu8 TempWrProtect; /* Temporary write protection */
- vu8 FileFormat; /* File Format */
- vu8 ECC; /* ECC code */
- vu8 CSD_CRC; /* CSD CRC */
- vu8 Reserved4; /* always 1*/
-} SD_CSD;
-
-typedef struct /*Card Identification Data*/
-{
- vu8 ManufacturerID; /* ManufacturerID */
- vu16 OEM_AppliID; /* OEM/Application ID */
- vu32 ProdName1; /* Product Name part1 */
- vu8 ProdName2; /* Product Name part2*/
- vu8 ProdRev; /* Product Revision */
- vu32 ProdSN; /* Product Serial Number */
- vu8 Reserved1; /* Reserved1 */
- vu16 ManufactDate; /* Manufacturing Date */
- vu8 CID_CRC; /* CID CRC */
- vu8 Reserved2; /* always 1 */
-} SD_CID;
-
-typedef struct
-{
- SD_CSD SD_csd;
- SD_CID SD_cid;
- u8 CardType;
- u16 RCA;
-} SD_CardInfo;
-
-/* Exported constants --------------------------------------------------------*/
-#define SD_DMA_MODE ((u32)0x00000000)
-#define SD_INTERRUPT_MODE ((u32)0x00000001)
-#define SD_POLLING_MODE ((u32)0x00000002)
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-SD_Error SD_Init(void);
-SD_Error SD_PowerON(void);
-SD_Error SD_PowerOFF(void);
-SD_Error SD_InitializeCards(void);
-SD_Error SD_GetCardInfo(SD_CardInfo *cardinfo);
-SD_Error SD_EnableWideBusOperation(u32 WideMode);
-SD_Error SD_SetDeviceMode(u32 Mode);
-SD_Error SD_SelectDeselect(u32 addr);
-SD_Error SD_ReadBlock(u32 addr, u32 *readbuff, u16 BlockSize);
-SD_Error SD_ReadMultiBlocks(u32 addr, u32 *readbuff, u16 BlockSize, u32 NumberOfBlocks);
-SD_Error SD_WriteBlock(u32 addr, u32 *writebuff, u16 BlockSize);
-SD_Error SD_WriteMultiBlocks(u32 addr, u32 *writebuff, u16 BlockSize, u32 NumberOfBlocks);
-SDTransferState SD_GetTransferState(void);
-SD_Error SD_StopTransfer(void);
-SD_Error SD_Erase(u32 startaddr, u32 endaddr);
-SD_Error SD_SendStatus(u32 *pcardstatus);
-SD_Error SD_SendSDStatus(u32 *psdstatus);
-SD_Error SD_ProcessIRQSrc(void);
-
-#endif /* __SDCARD_H */
-
-/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
|