1 files changed, 0 insertions, 97 deletions
diff --git a/src/stm32lib/examples/NVIC/Priority/readme.txt b/src/stm32lib/examples/NVIC/Priority/readme.txt
deleted file mode 100755
index bd6c360..0000000
--- a/src/stm32lib/examples/NVIC/Priority/readme.txt
+++ /dev/null
@@ -1,97 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : readme.txt
-* Author             : MCD Application Team
-* Version            : V2.0.1
-* Date               : 06/13/2008
-* Description        : Description of the NVIC Priority Example.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-Example description
-===================
-This example demontrates the use of the Nested Vectored Interrupt Controller (NVIC): 
-
-- Configuration of 2 EXTI Lines (Wakeup button EXTI Line & Key button EXTI Line)
-  to generate an interrupt on each falling edge and use the SysTick interrupt.
-- These interrupts are configured with the following parameters:
-  Wakeup button EXTI Line: o PreemptionPriority = PreemptionPriorityValue
-                           o SubPriority = 0
-  Key button EXTI Line:    o PreemptionPriority = 0
-                           o SubPriority = 1           
-  SysTick Handler: o PreemptionPriority = !PreemptionPriorityValue
-                   o SubPriority = 0             
-First, the PreemptionPriorityValue is equal to 0, the Wakeup button EXTI Line 
-has higher preemption priority than the SysTick handler. 
-
-In the key button EXTI Line interrupt routine the Wakeup button EXTI Line and 
-SysTick preemption priorities are inverted. 
-In the Wakeup button EXTI Line interrupt routine the pending bit of the SysTick 
-interrupt is set this will cause SysTick ISR to preempt the Wakeup button EXTI 
-Line ISR only if it has higher preemption priority.
-
-The system behaves as following: 
-1) The first time Key button EXTI Line interrupt occurs the SysTick preemption 
-become higher than Wakeup button EXTI Line one. So when the Wakeup button EXTI 
-Line interrupt occurs, the SysTick ISR is executed and the PreemptionOccured 
-variable become TRUE and the four leds (LD1, LD2, LD3, LD4) start toggling.
-
-2) When the next Key button EXTI Line interrupt occurs the SysTick preemption
-become lower than Wakeup button EXTI Line one. So when the Wakeup button EXTI Line
-interrupt occurs, the PreemptionOccured variable became FALSE and the four leds
-(LD1, LD2, LD3, LD4) stop toggling.
-
-Then this behavior is repeated from point 1) in an infinite loop.
-
-
-Directory contents
-==================
-platform_config.h    Evaluation board specific configuration file
-stm32f10x_conf.h     Library Configuration file
-stm32f10x_it.c       Interrupt handlers
-stm32f10x_it.h       Interrupt handlers header file
-main.c               Main program
-
-
-Hardware environment
-====================
-This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
-boards and can be easily tailored to any other hardware.
-To select the STMicroelectronics evaluation board used to run the example, uncomment
-the corresponding line in platform_config.h file.
-
- + STM3210B-EVAL 
-    - Use LD1, LD2, LD3 and LD4 leds connected respectively to PC.06, PC.07, PC.08
-      and PC.09 pins
-    - Use the Key push-button connected to pin PB.09 (EXTI Line9).
-    - Use the Wakeup push-button connected to pin PA.00 (EXTI Line0).         
- 
- + STM3210E-EVAL
-    - Use LD1, LD2, LD3 and LD4 leds connected respectively to PF.06, PF0.7, PF.08
-      and PF.09 pins
-    - Use the Key push-button connected to pin PG.08 (EXTI Line8).
-    - Use the Wakeup push-button connected to pin PA.00 (EXTI Line0).
- 
-    
-How to use it
-=============
-In order to make the program work, you must do the following :
-- Create a project and setup all your toolchain's start-up files
-- Compile the directory content files and required Library files :
-  + stm32f10x_lib.c
-  + stm32f10x_exti.c
-  + stm32f10x_gpio.c
-  + stm32f10x_rcc.c
-  + stm32f10x_nvic.c
-  + stm32f10x_flash.c
-    
-- Link all compiled files and load your image into target memory
-- Run the example
-
-
-******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******