1 files changed, 0 insertions, 83 deletions
diff --git a/src/stm32lib/examples/Lib_DEBUG/readme.txt b/src/stm32lib/examples/Lib_DEBUG/readme.txt
deleted file mode 100755
index 5584d97..0000000
--- a/src/stm32lib/examples/Lib_DEBUG/readme.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : readme.txt
-* Author             : MCD Application Team
-* Version            : V2.0.1
-* Date               : 06/13/2008
-* Description        : Description of the Lib_DEBUG Example.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-Example description
-===================
-This example demonstrates the STM32F10x Firmware Library DEBUG mode.  
-
-To enter Debug mode you have to define the label DEBUG in the stm32f10x_conf.h file.
-This creates a pointer to the peripheral structure in SRAM. Debugging consequently
-becomes easier and all register settings can be obtained by dumping a peripheral variable.
-When the Debug mode is selected, the assert_param macro is expanded and run-time checking 
-is enabled in the firmware library code. The run-time checking allows checking that
-all the library functions input value lies within the parameter allowed values.
-
-The associated program simulates wrong parameter passed to library function and the
-source of the error is printed on Hyperterminal (through USART1).
-
-
-Note:
-The Debug mode increases the code size and reduces the code performance. For this
-reason, it is recommended to used it only when debugging the application and to
-remove it from the final application code.
-
-
-Directory contents
-==================
-stm32f10x_conf.h  Library Configuration file
-stm32f10x_it.c    Interrupt handlers
-stm32f10x_it.h    Header for stm32f10x_it.c
-main.c            Main program
-
-
-Hardware environment
-====================
-This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
-boards and can be easily tailored to any other hardware.
-
- + STM3210B-EVAL 
-    - Connect a null-modem female/female RS232 cable between the DB9 connector 
-      CN6 and PC serial port.
- 
- + STM3210E-EVAL
-    - Connect a null-modem female/female RS232 cable between the DB9 connector 
-      CN12 and PC serial port.
- 
-
- - Hyperterminal configuration:
-    - Word Length = 8 Bits
-    - One Stop Bit
-    - No parity
-    - BaudRate = 115200 baud
-    - flow control: None 
-
-      
-How to use it
-=============
-In order to make the program work, you must do the following:
-- Create a project and setup all your toolchain's start-up files
-- Compile the directory content files and required Library files:
-  + stm32f10x_lib.c
-  + stm32f10x_gpio.c
-  + stm32f10x_rcc.c
-  + stm32f10x_nvic.c
-  + stm32f10x_flash.c
-  + stm32f10x_usart.c
-      
-- Link all compiled files and load your image into target memory
-- Run the example
-
-
-******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******