1 files changed, 0 insertions, 56 deletions
diff --git a/src/stm32lib/examples/FSMC/NOR_CodeExecute/readme.txt b/src/stm32lib/examples/FSMC/NOR_CodeExecute/readme.txt
deleted file mode 100755
index 71ac2fd..0000000
--- a/src/stm32lib/examples/FSMC/NOR_CodeExecute/readme.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : readme.txt
-* Author             : MCD Application Team
-* Version            : V2.0.1
-* Date               : 06/13/2008
-* Description        : Description of the FSMC NOR_CodeExecute Example.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-Example description
-===================
-This directory contains a set of sources files that describes how to build an
-application to be loaded into the NOR memory mounted on STM3210E-EVAL board then
-execute it from internal Flash.
-
-
-Directory contents
-==================
- + \binary           Contains a set of sources files that build the application 
-                     to be loaded into the NOR memory mounted on STM3210E-EVAL board.
- + stm32f10x_conf.h  Library Configuration file
- + stm32f10x_it.c    Interrupt handlers
- + stm32f10x_it.h    Header for stm32f10x_it.c
- + main.c            Main program
-
-
-Hardware environment
-====================
-This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
-boards and can be easily tailored to any other hardware.
-
-    
-How to use it
-=============
-In order to make the program work, you must do the following:
-1. Program the NOR memory with the example provided in the \binary directory
-2. Program the internal Flash with the code that will jump to the NOR memory to execute 
-    the loaded example, for this you have to:
-      - Create a project and setup all your toolchain's start-up files
-      - Compile the directory content files and required Library files:
-          + stm32f10x_lib.c
-          + stm32f10x_gpio.c
-          + stm32f10x_rcc.c
-          + stm32f10x_nvic.c
-          + stm32f10x_flash.c
-      - Link all compiled files and load your image into target memory
-      - Run the example
-
-
-******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******