1 files changed, 0 insertions, 63 deletions
diff --git a/src/stm32lib/examples/DMA/FLASH_RAM/readme.txt b/src/stm32lib/examples/DMA/FLASH_RAM/readme.txt
deleted file mode 100755
index 0810ef3..0000000
--- a/src/stm32lib/examples/DMA/FLASH_RAM/readme.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : readme.txt
-* Author             : MCD Application Team
-* Version            : V2.0.1
-* Date               : 06/13/2008
-* Description        : Description of the DMA FLASH to RAM example.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-Example description
-===================
-This example provides a description of how to use a DMA channel to transfer 
-a word data buffer from FLASH memory to embedded SRAM memory.
-
-DMA1 Channel6 is configured to transfer the contents of a 32-word data buffer
-stored in Flash memory to the reception buffer declared in RAM.
-
-The start of transfer is triggered by software. DMA1 Channel6 memory-to-memory
-transfer is enabled. Source and destination addresses incrementing is also enabled.
-The transfer is started by setting the Channel enable bit for DMA1 Channel6.
-At the end of the transfer a Transfer Complete interrupt is generated since it
-is enabled. Once interrupt is generated, the remaining data to be transferred is
-read which must be equal to 0. The Transfer Complete Interrupt pending bit is
-then cleared. A comparison between the source and destination buffers is done to
-check that all data have been correctly transferred.
-
-
-Directory contents
-==================
-stm32f10x_conf.h  Library Configuration file
-stm32f10x_it.c    Interrupt handlers
-stm32f10x_it.h    Interrupt handlers header file
-main.c            Main program
-
-
-Hardware environment
-====================
-This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
-boards and can be easily tailored to any other hardware.
-
-      
-How to use it
-=============
-In order to make the program work, you must do the following :
-- Create a project and setup all your toolchain's start-up files
-- Compile the directory content files and required Library files :
-  + stm32f10x_lib.c
-  + stm32f10x_dma.c
-  + stm32f10x_rcc.c
-  + stm32f10x_nvic.c
-  + stm32f10x_flash.c  
-
-- Link all compiled files and load your image into target memory
-- Run the example
-
-
-******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******