1 files changed, 0 insertions, 68 deletions
diff --git a/src/stm32lib/examples/DAC/OneChannelDMA_Escalator/readme.txt b/src/stm32lib/examples/DAC/OneChannelDMA_Escalator/readme.txt
deleted file mode 100755
index d5e132a..0000000
--- a/src/stm32lib/examples/DAC/OneChannelDMA_Escalator/readme.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : readme.txt
-* Author             : MCD Application Team
-* Version            : V2.0.1
-* Date               : 06/13/2008
-* Description        : Description of the DAC one channel DMA escalator example.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-Example description
-===================
-This example describes how to use one DAC channel mode with DMA to generate an
-escalator signal on DAC channel1 outpout.
-
-DAC channel1 conversion is configured to be triggered by TIM6 TRGO triggers and
-without noise/triangle wave generation. 8bit right data alignement is selected
-since we choose to acces DAC_DHR8R1 register.
-DMA2 channel3 is configured to transfer continuously, byte by byte, a 6-byte
-buffer to the DAC1 register DAC_DHR8R1.
-
-The transfered 6bytes buffer is made to have an escalator signal on DAC channel1
-output. DAC channel1 is then enabled. Once TIM6 is enabled, each TIM6 TRGO update
-event generate a DMA request which transfer data  to the DAC1 register and DAC
-conversion is started. The escalator signal can be visualized by connecting PA.04
-pin to an oscilloscope.
-
-
-Directory contents
-==================
-stm32f10x_conf.h     Library Configuration file
-stm32f10x_it.c       Interrupt handlers
-stm32f10x_it.h       Header for stm32f10x_it.c
-main.c               Main program
-
-
-Hardware environment
-====================
-This example runs on STMicroelectronics STM3210E-EVAL evaluation board and can be 
-easily tailored to any other hardware.
-
- - Connect PA.04 pin to an oscilloscope
-
-    
-How to use it
-=============
-In order to make the program work, you must do the following:
-- Create a project and setup all your toolchain's start-up files
-- Compile the directory content files and required Library files:
-  + stm32f10x_lib.c
-  + stm32f10x_gpio.c
-  + stm32f10x_rcc.c
-  + stm32f10x_nvic.c
-  + stm32f10x_flash.c
-  + stm32f10x_dac.c
-  + stm32f10x_dma.c
-  + stm32f10x_tim.c
-  
-- Link all compiled files and load your image into target memory
-- Run the example
-
-
-******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******