1 files changed, 85 insertions, 0 deletions
diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/makefile b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/makefile
new file mode 100755
index 0000000..ec9fcd6
--- /dev/null
+++ b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/makefile
@@ -0,0 +1,85 @@
+# setup
+
+COMPILE_OPTS = -mcpu=cortex-m3 -mthumb -Wall -g -O0
+INCLUDE_DIRS = -I . -I lib/inc
+LIBRARY_DIRS = -L lib
+
+CC = arm-none-eabi-gcc
+CFLAGS = $(COMPILE_OPTS) $(INCLUDE_DIRS)
+
+CXX = arm-none-eabi-g++
+CXXFLAGS = $(COMPILE_OPTS) $(INCLUDE_DIRS)
+
+AS = arm-none-eabi-gcc
+ASFLAGS = $(COMPILE_OPTS) -c
+
+LD = arm-none-eabi-gcc
+LDFLAGS = -Wl,--gc-sections,-Map=$@.map,-cref,-u,Reset_Handler $(INCLUDE_DIRS) $(LIBRARY_DIRS) -T stm32.ld
+
+OBJCP = arm-none-eabi-objcopy
+OBJCPFLAGS = -O binary
+
+AR = arm-none-eabi-ar
+ARFLAGS = cr
+
+MAIN_OUT = main
+MAIN_OUT_ELF = $(MAIN_OUT).elf
+MAIN_OUT_BIN = $(MAIN_OUT).bin
+
+# all
+
+all: $(MAIN_OUT_ELF) $(MAIN_OUT_BIN)
+
+# main
+
+$(MAIN_OUT_ELF): main.o stm32f10x_it.o lib/libstm32.a
+	$(LD) $(LDFLAGS) main.o stm32f10x_it.o lib/libstm32.a --output $@
+
+$(MAIN_OUT_BIN): $(MAIN_OUT_ELF)
+	$(OBJCP) $(OBJCPFLAGS) $< $@
+
+
+# flash
+
+# this is key, copy the .elf file under a new name into the jtag dir
+# run openocd, and load the chip all in one step.
+flash: $(MAIN_OUT)
+	@cp $(MAIN_OUT_ELF) jtag/flash
+	@cd jtag; openocd -f flash.cfg
+#	@rm jtag/flash
+
+
+# libstm32.a
+
+LIBSTM32_OUT = lib/libstm32.a
+
+LIBSTM32_OBJS = \
+ lib/src/stm32f10x_adc.o \
+ lib/src/stm32f10x_bkp.o \
+ lib/src/stm32f10x_can.o \
+ lib/src/stm32f10x_dac.o \
+ lib/src/stm32f10x_dma.o \
+ lib/src/stm32f10x_exti.o \
+ lib/src/stm32f10x_flash.o \
+ lib/src/stm32f10x_gpio.o \
+ lib/src/stm32f10x_i2c.o \
+ lib/src/stm32f10x_iwdg.o \
+ lib/src/stm32f10x_lib.o \
+ lib/src/stm32f10x_nvic.o \
+ lib/src/stm32f10x_pwr.o \
+ lib/src/stm32f10x_rcc.o \
+ lib/src/stm32f10x_rtc.o \
+ lib/src/stm32f10x_spi.o \
+ lib/src/stm32f10x_systick.o \
+ lib/src/stm32f10x_tim.o \
+ lib/src/stm32f10x_usart.o \
+ lib/src/stm32f10x_wwdg.o
+
+$(LIBSTM32_OUT): $(LIBSTM32_OBJS)
+	$(AR) $(ARFLAGS) $@ $(LIBSTM32_OBJS)
+
+$(LIBSTM32_OBJS): stm32f10x_conf.h
+
+
+clean:
+	-rm *.o lib/src/*.o $(LIBSTM32_OUT) $(MAIN_OUT_ELF) $(MAIN_OUT_BIN)