1 files changed, 60 insertions, 0 deletions
diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/openocd.cfg b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/openocd.cfg
new file mode 100755
index 0000000..34d57ff
--- /dev/null
+++ b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/openocd.cfg
@@ -0,0 +1,60 @@
+# Open On-Chip Debugger
+# (c) 2005 by Dominic Rath
+# (snapshot r247 from SVN tree + giveio, no official release, compiled my mifi)
+#
+# --help       | -h       display this help
+# --file       | -f       use configuration file <name>
+# --debug      | -d       set debug level <0-3>
+# --log_output | -l       redirect log output to file <name>
+
+
+# daemon configuration
+
+# logging
+#debug 3
+
+# default ports
+telnet_port 4444
+gdb_port 3333
+
+daemon_startup reset
+
+#gdb_flash_program enable
+
+
+# interface configuration
+
+interface ft2232
+ft2232_device_desc "Olimex OpenOCD JTAG"
+ft2232_layout olimex-jtag
+ft2232_vid_pid 0x15ba 0x0003
+
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+
+reset_config trst_and_srst
+
+
+# scan chain configuration
+
+# jtag_device L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+jtag_device 5 0x1 0x1 0x1e
+
+
+# target configuration
+
+# target <type> <startup mode>
+# target cortex_m3 <endianness> <reset mode> <chainpos> <variant>
+target cortex_m3 little reset_halt 0
+#target cortex_m3 little run_and_halt 0
+
+# run_and_halt_time <target> <time_in_ms>
+#run_and_halt_time 0 0
+
+# working_area <target> <address> <size> <backup|nobackup>
+working_area 0 0x20000000 0x5000 nobackup
+
+# flash bank <driver> <base> <size> <chip_width> <bus_width> <target> [options]
+# flash bank stm32x <base> <size> 0 0 <target>
+flash bank stm32x 0x08000000 0x20000 0 0 0