1 files changed, 0 insertions, 73 deletions
diff --git a/src/stm32lib/examples/ADC/TIMTrigger_AutoInjection/readme.txt b/src/stm32lib/examples/ADC/TIMTrigger_AutoInjection/readme.txt
deleted file mode 100755
index 6e90439..0000000
--- a/src/stm32lib/examples/ADC/TIMTrigger_AutoInjection/readme.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : readme.txt
-* Author             : MCD Application Team
-* Version            : V2.0.1
-* Date               : 06/13/2008
-* Description        : Description of the ADC TIM trigger and auto-injection Example.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-Example description
-===================
-This example describes how to convert ADC regular group channels continuously using
-TIM1 external trigger and injected group channels using the auto-injected feature.
-
-ADC1 is configured to convert on each TIM1 capture compare event ADC channel14.
-Each time an end of regular conversion occurs the DMA transfers, the converted data 
-from ADC1 DR register to the ADC_RegularConvertedValueTab table. 
-Enabling the auto-injected feature, allows to convert automatically the injected 
-channel ADC channel11 after the end of the regular channel14. An ADC interrupt is 
-generated then by JEOC flag at the end of the injected channel conversion and in 
-the interrupt routine the result is stored in the ADC_InjectedConvertedValueTab table.
-The procedure is repeated 32 times then the TIM1 peripheral is disabled and thus, 
-no conversion will be done neither regular or injected.
-TIM1 start conversion triggers can be visualized on oscilloscope on PA.08 and at the
-same time the toggle of pin PC.06 which indicates the automatic auto-injection conversion.
-The ADC1 clock is set to 14 MHz.
-
-
-Directory contents
-==================
-stm32f10x_conf.h  Library Configuration file
-stm32f10x_it.c    Interrupt handlers
-stm32f10x_it.h    Interrupt handlers header file
-main.c            Main program
-
-
-
-Hardware environment
-====================
-This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
-boards and can be easily tailored to any other hardware.
-
- - Connect a known voltage, between 0-3.3V, to ADC Channel14 mapped on pin PC.04
-   (potentiometer RV1 on STM3210B-EVAL and STM3210E-EVAL boards) and ADC Channel11 
-   mapped on pin PC.01
- - Connect PA.08 and PC.06 pins to an oscilloscope
-   
-      
-How to use it
-=============
-In order to make the program work, you must do the following :
-- Create a project and setup all your toolchain's start-up files
-- Compile the directory content files and required Library files :
-  + stm32f10x_lib.c
-  + stm32f10x_adc.c
-  + stm32f10x_dma.c
-  + stm32f10x_tim.c
-  + stm32f10x_gpio.c
-  + stm32f10x_rcc.c
-  + stm32f10x_nvic.c
-  + stm32f10x_flash.c
-  
-- Link all compiled files and load your image into target memory
-- Run the example
-
-
-******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******