1 files changed, 0 insertions, 78 deletions
diff --git a/src/stm32lib/examples/ADC/3ADCs_DMA/readme.txt b/src/stm32lib/examples/ADC/3ADCs_DMA/readme.txt
deleted file mode 100755
index 00fe3e7..0000000
--- a/src/stm32lib/examples/ADC/3ADCs_DMA/readme.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : readme.txt
-* Author             : MCD Application Team
-* Version            : V2.0.1
-* Date               : 06/13/2008
-* Description        : Description of the 3ADCs DMA example.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-Example description
-===================
-This example describes how to use the 3 ADCs in independant conversions. 
-Two of them; ADC1 and ADC3 are transfering continuously converted data using DMA
-while ADC2 converted data are stored using End of conversion interrupt.
-
-ADC1 is configured to converts continuously ADC channel14. Each time an end of
-conversion occurs the DMA1 transfers, in circular mode, the converted data from 
-ADC1 DR register to the ADC1_ConvertedValue variable.
-
-ADC2 is configured to converts continuously ADC channel13. Each time an end of
-conversion occurs an end of conversion interrupt is generated and inside the
-interrupt routine the converted data are read from ADC2 DR register and stored
-into the ADC2_ConvertedValue variable.
-
-ADC3 is configured to converts continuously ADC channel12. Each time an end of
-conversion occurs the DMA2 transfers, in circular mode, the converted data from
-ADC3 DR register to the ADC3_ConvertedValue variable.
-
-The ADCs clocks are set to 14 MHz.
-
-The result of ADC1, ADC2 and ADC3 conversion is monitored through the three
-variables: ADC1ConvertedValue, ADC2ConvertedValue and ADC3ConvertedValue.
-
-
-Directory contents
-==================
-stm32f10x_conf.h  Library Configuration file
-stm32f10x_it.c    Interrupt handlers
-stm32f10x_it.h    Interrupt handlers header file
-main.c            Main program
-
-
-
-Hardware environment
-====================
-This example runs on STMicroelectronics STM3210E-EVAL evaluation board and can be 
-easily tailored to any other hardware.
-
- - Connect a variable power supply 0-3.3V to ADC Channel12 mapped on pin PC.02
- - Connect a variable power supply 0-3.3V to ADC Channel13 mapped on pin PC.03
- - Connect a variable power supply 0-3.3V to ADC Channel14 mapped on pin PC.04
-   (potentiometer RV1 on STM3210E-EVAL board) 
-   
-      
-How to use it
-=============
-In order to make the program work, you must do the following :
-- Create a project and setup all your toolchain's start-up files
-- Compile the directory content files and required Library files :
-  + stm32f10x_lib.c
-  + stm32f10x_adc.c
-  + stm32f10x_dma.c
-  + stm32f10x_gpio.c
-  + stm32f10x_rcc.c
-  + stm32f10x_nvic.c
-  + stm32f10x_flash.c
-  
-- Link all compiled files and load your image into target memory
-- Run the example
-
-
-******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******