aboutsummaryrefslogtreecommitdiffstats
path: root/source
diff options
context:
space:
mode:
Diffstat (limited to 'source')
-rw-r--r--source/adc.rst68
1 files changed, 43 insertions, 25 deletions
diff --git a/source/adc.rst b/source/adc.rst
index 18c54ab..2cf9018 100644
--- a/source/adc.rst
+++ b/source/adc.rst
@@ -4,33 +4,59 @@
ADC
=====
-Analog-Digital Conversion is the process of reading a physical voltage
-as a number. The Maple has a large number of pins which are capable of
-taking 12-bit ADC measurements, which means that voltages from 0 to
-3.3V are read as numbers from 0 to 4095. This corresponds to a
-theoretical sensitivity of just under 1 millivolt. In reality, a
-number of factors introduce noise and bias into this reading, and a
-number of techniques must be used to get good precision and accuracy.
+Analog to digital conversion is the process of reading a physical
+voltage as a number. Maple can convert voltages between 0 and 3.3V to
+numbers between 0 and 4095.
.. contents:: Contents
:local:
+ADC On Maple
+------------
+
+Doing analog-to-digital conversion on the Maple is simple.
+:ref:`Maple IDE <ide>` contains a basic example. To see it, choose
+Analog > AnalogInSerial from the :ref:`examples menu <ide-examples>`.
+
+In order to set up your board for conversion, first connect the wire
+(potentiometer, etc.) with the voltage you want to measure to a
+:ref:`pin <gpio>` which can perform ADC. Each pin which can do ADC
+has "AIN" (or "ain") written next to the the pin number. Then, as in
+the example program, set the chosen pin's :ref:`pin mode
+<lang-pinmode>` to ``INPUT_ANALOG`` by calling ``pinMode(<your_pin>,
+INPUT_ANALOG)``. You will usually do this in your :ref:`lang-setup`
+function. Now you can use :ref:`lang-analogread` to perform an ADC
+reading.
+
+.. _adc-function-reference:
+
+Function Reference
+------------------
+
+* :ref:`lang-analogread`
+* :ref:`lang-pinmode`
+
.. _adc-noise-bias:
Noise and Bias
--------------
-.. FIXME [0.0.12, Maple Native]
-
-The biggest issues with analog to digital conversion are noise and
-bias. With the Maple line, we have tried to isolate the ADC pins and
-traces from strong noise sources, but there are always trade-offs
-between noise, additional functionality, cost, and package size.
-We've tried to enable good analog performance by isolating as many ADC
-pins as possible from digital noise on each board.
+Maple has a large number of pins which are capable of taking 12-bit
+ADC measurements, which means that voltages from 0 to 3.3V are read as
+numbers from 0 to 4095. In theory, this means that a change in
+voltage of about 1 millivolt should change the numeric voltage reading
+by 1. In reality, however, a number of issues introduce noise and
+bias into this reading, and a number of techniques must be used to get
+good precision and accuracy.
+
+In order to allow for good readings, LeafLabs has tried to isolate at
+least some of each board's ADC pins and traces from strong noise
+sources. However, there are always trade-offs between noise,
+additional functionality, cost, and package size. More information on
+these isolated pins is available in each board's hardware
+documentation:
-More information on these isolated pins is available in each board's
-hardware documentation:
+.. FIXME [0.0.12, Maple Native]
* :ref:`Maple <maple-adc-bank>`
* :ref:`Maple RET6 Edition <maple-ret6-adc-bank>`
@@ -63,14 +89,6 @@ are `resistor dividers
<http://en.wikipedia.org/wiki/Operational_amplifier>`_ and other
powered components can also be used if greater precision is required.
-.. _adc-function-reference:
-
-Function Reference
-------------------
-
-* :ref:`lang-analogread`
-* :ref:`lang-pinmode`
-
.. _adc-recommended-reading:
Recommended Reading