diff options
Diffstat (limited to 'source/hardware/maple.rst')
| -rw-r--r-- | source/hardware/maple.rst | 43 |
1 files changed, 37 insertions, 6 deletions
diff --git a/source/hardware/maple.rst b/source/hardware/maple.rst index d0434ab..4aed91d 100644 --- a/source/hardware/maple.rst +++ b/source/hardware/maple.rst @@ -118,7 +118,7 @@ GPIO Information The Maple features 38 ready-to-use general purpose input/output (GPIO) pins for digital input/output, numbered ``D0`` through ``D37``. These numbers correspond to the numeric values next to each header on the -Maple silkscreen. More GPIOs (numbered ``D39``\ --``43``) are +Maple silkscreen. More GPIOs (numbered ``D39``\ --``D43``) are available through use in combination with the :ref:`lang-disabledebugports` function; see the :ref:`board-specific debug pin constants <lang-board-values-debug>` for more information. @@ -246,8 +246,6 @@ The following table shows which pins connect to which :ref:`EXTI lines USART Pin Map ^^^^^^^^^^^^^ -.. FIXME [0.0.10] UART4, UART5 - The Maple has three serial ports (also known as a UARTs or USARTs): ``Serial1``, ``Serial2``, and ``Serial3``. They communicate using the pins summarized in the following table: @@ -263,9 +261,42 @@ pins summarized in the following table: Board-Specific Values --------------------- -.. TODO [0.0.10] - -Stub. +This section lists the Maple's :ref:`board-specific values +<lang-board-values>`. + +- ``CYCLES_PER_MICROSECOND``: 72 +- ``BOARD_BUTTON_PIN``: 38 +- ``BOARD_LED_PIN``: 13 +- ``BOARD_NR_GPIO_PINS``: 44 +- ``BOARD_NR_PWM_PINS``: 16 +- ``boardPWMPins``: 0, 1, 2, 3, 5, 6, 7, 8, 9, 11, 12, 14, 24, 25, 27, 28 +- ``BOARD_NR_ADC_PINS``: 15 +- ``boardADCPins``: 0, 1, 2, 10, 11, 12, 13, 15, 16, 17, 18, 19, 20, 27, 28 +- ``BOARD_NR_USED_PINS``: 7 +- ``boardUsedPins``: ``BOARD_LED_PIN``, ``BOARD_BUTTON_PIN``, + ``BOARD_JTMS_SWDIO_PIN``, ``BOARD_JTCK_SWCLK_PIN``, + ``BOARD_JTDI_PIN``, ``BOARD_JTDO_PIN``, ``BOARD_NJTRST_PIN`` +- ``BOARD_NR_USARTS``: 3 +- ``BOARD_USART1_TX_PIN``: 7 +- ``BOARD_USART1_RX_PIN``: 8 +- ``BOARD_USART2_TX_PIN``: 1 +- ``BOARD_USART2_RX_PIN``: 0 +- ``BOARD_USART3_TX_PIN``: 29 +- ``BOARD_USART3_RX_PIN``: 30 +- ``BOARD_NR_SPI``: 2 +- ``BOARD_SPI1_NSS_PIN``: 10 +- ``BOARD_SPI1_MOSI_PIN``: 11 +- ``BOARD_SPI1_MISO_PIN``: 12 +- ``BOARD_SPI1_SCK_PIN``: 13 +- ``BOARD_SPI2_NSS_PIN``: 31 +- ``BOARD_SPI2_MOSI_PIN``: 34 +- ``BOARD_SPI2_MISO_PIN``: 33 +- ``BOARD_SPI2_SCK_PIN``: 32 +- ``BOARD_JTMS_SWDIO_PIN``: 39 +- ``BOARD_JTCK_SWCLK_PIN``: 40 +- ``BOARD_JTDI_PIN``: 41 +- ``BOARD_JTDO_PIN``: 42 +- ``BOARD_NJTRST_PIN``: 43 Hardware Design Files --------------------- |