aboutsummaryrefslogtreecommitdiffstats
path: root/source/hardware/maple-mini.rst
diff options
context:
space:
mode:
Diffstat (limited to 'source/hardware/maple-mini.rst')
-rw-r--r--source/hardware/maple-mini.rst2
1 files changed, 1 insertions, 1 deletions
diff --git a/source/hardware/maple-mini.rst b/source/hardware/maple-mini.rst
index 36702dd..c28211d 100644
--- a/source/hardware/maple-mini.rst
+++ b/source/hardware/maple-mini.rst
@@ -70,7 +70,7 @@ other supplies power to the analog voltage plane.
These voltage regulators nominally take an input of up to 16V. In
addition, while the maximum continuous output current for the board is
250mA, if you are powering the board off higher voltages the amount
-off current it can supply goes down, due to the regulators needing to
+current it can supply goes down, due to the regulators needing to
dissipate the extra power. So if you are powering the board off 12V,
the max current is about 40mA at room temperature. In general (again,
at room temperature) the max power dissipation (PD) for the chip is