5 files changed, 25 insertions, 26 deletions
diff --git a/libraries/Wire/HardWire.cpp b/libraries/Wire/HardWire.cpp
index 9176a87..9182ae2 100644
--- a/libraries/Wire/HardWire.cpp
+++ b/libraries/Wire/HardWire.cpp
@@ -63,4 +63,4 @@ HardWire::HardWire(uint8 dev_sel, uint8 flags) {
 HardWire::~HardWire() {
     i2c_disable(sel_hard);
     sel_hard = 0;
-}
-\ No newline at end of file
+}
diff --git a/libraries/Wire/HardWire.h b/libraries/Wire/HardWire.h
index 91e141d..d3f4ed8 100644
--- a/libraries/Wire/HardWire.h
+++ b/libraries/Wire/HardWire.h
@@ -36,13 +36,12 @@
  * users easy interaction with the I2C Hardware in a familiar method.
  */
 
-#include "wirish.h"
-#include "WireBase.h"
-
 #ifndef _HARDWIRE_H_
 #define _HARDWIRE_H_
 
-#include "i2c.h"
+#include "WireBase.h"
+#include <wirish/wirish.h>
+#include <libmaple/i2c.h>
 
 class HardWire : public WireBase {
 private:
@@ -50,8 +49,8 @@ private:
     uint8    dev_flags;
 protected:
     /*
-     * Processes the incoming I2C message defined by WireBase to the hardware. If
-     * an error occured, restart the I2C device.
+     * Processes the incoming I2C message defined by WireBase to the
+     * hardware. If an error occured, restart the I2C device.
      */
     uint8 process();
 public:
@@ -67,4 +66,4 @@ public:
     ~HardWire();
 };
 
-#endif // _HARDWIRE_H_
-\ No newline at end of file
+#endif // _HARDWIRE_H_
diff --git a/libraries/Wire/Wire.h b/libraries/Wire/Wire.h
index 7827e45..812132b 100644
--- a/libraries/Wire/Wire.h
+++ b/libraries/Wire/Wire.h
@@ -37,12 +37,12 @@
  * modifications by gke and ala42.
  */
 
-#include "wirish.h"
-#include "WireBase.h"
-
 #ifndef _WIRE_H_
 #define _WIRE_H_
 
+#include "WireBase.h"
+#include <wirish/wirish.h>
+
 /*
  * On the Maple, let the default pins be in the same location as the Arduino
  * pins
@@ -113,14 +113,15 @@ class TwoWire : public WireBase {
     uint8 process();
  public:
     /*
-     * Accept pin numbers for SCL and SDA lines. Set the delay needed to create the
-     * timing for I2C's Standard Mode and Fast Mode.
+     * Accept pin numbers for SCL and SDA lines. Set the delay needed
+     * to create the timing for I2C's Standard Mode and Fast Mode.
      */
     TwoWire(uint8 = SCL, uint8 = SDA, uint8 = SOFT_STANDARD);
 
     /*
-     * Sets pins SDA and SCL to OUPTUT_OPEN_DRAIN, joining I2C bus as master. This
-     * function overwrites the default behaviour of .begin(uint8) in WireBase
+     * Sets pins SDA and SCL to OUPTUT_OPEN_DRAIN, joining I2C bus as
+     * master. This function overwrites the default behaviour of
+     * .begin(uint8) in WireBase
      */
     void begin(uint8 = 0x00);
 
@@ -132,4 +133,4 @@ class TwoWire : public WireBase {
 
 extern TwoWire Wire();
 
-#endif // _WIRE_H_
-\ No newline at end of file
+#endif // _WIRE_H_
diff --git a/libraries/Wire/WireBase.cpp b/libraries/Wire/WireBase.cpp
index 00ca644..e9b316d 100644
--- a/libraries/Wire/WireBase.cpp
+++ b/libraries/Wire/WireBase.cpp
@@ -39,7 +39,7 @@
  */
 
 #include "WireBase.h"
-#include "wirish.h"
+#include <wirish/wirish.h>
 
 void WireBase::begin(uint8 self_addr) {
     tx_buf_idx = 0;
@@ -137,4 +137,4 @@ uint8 WireBase::receive() {
         return temp;
     }
     return rx_buf[rx_buf_idx++];
-}
-\ No newline at end of file
+}
diff --git a/libraries/Wire/WireBase.h b/libraries/Wire/WireBase.h
index 555cbaf..e154476 100644
--- a/libraries/Wire/WireBase.h
+++ b/libraries/Wire/WireBase.h
@@ -38,12 +38,11 @@
  * whether it is I2C hardware or emulating software.
  */
 
-#include "wirish.h"
-
 #ifndef _WIREBASE_H_
 #define _WIREBASE_H_
 
-#include "i2c.h"
+#include <wirish/wirish.h>
+#include <libmaple/i2c.h>
 
 #define WIRE_BUFSIZ 32
 
@@ -88,14 +87,14 @@ public:
     void beginTransmission(int);
 
     /*
-     * Call the process function to process the message if the TX buffer has not
-     * overflowed.
+     * Call the process function to process the message if the TX
+     * buffer has not overflowed.
      */
     uint8 endTransmission(void);
 
     /*
-     * Request bytes from a slave device and process the request, storing into the
-     * receiving buffer.
+     * Request bytes from a slave device and process the request,
+     * storing into the receiving buffer.
      */
     uint8 requestFrom(uint8, int);
 
@@ -141,4 +140,4 @@ public:
     uint8 receive();
 };
 
-#endif // _WIREBASE_H_
-\ No newline at end of file
+#endif // _WIREBASE_H_