diff options
Diffstat (limited to 'libmaple')
| -rw-r--r-- | libmaple/include/libmaple/stm32.h | 12 | ||||
| -rw-r--r-- | libmaple/stm32f1/include/series/stm32.h | 100 | ||||
| -rw-r--r-- | libmaple/stm32f2/include/series/stm32.h | 1 |
3 files changed, 82 insertions, 31 deletions
diff --git a/libmaple/include/libmaple/stm32.h b/libmaple/include/libmaple/stm32.h index d6f3304..d53af3a 100644 --- a/libmaple/include/libmaple/stm32.h +++ b/libmaple/include/libmaple/stm32.h @@ -58,9 +58,21 @@ extern "C" { * * - STM32_HAVE_FSMC: 1 if the MCU has the FSMC peripheral, and 0 * otherwise. + * + * - STM32_HAVE_USB: 1 if the MCU has a USB peripheral, and 0 + * otherwise. */ #include <series/stm32.h> +/* Ensure the series header isn't broken. */ +#if (!defined(STM32_PCLK1) || !defined(STM32_PCLK2) || \ + !defined(STM32_MCU_SERIES) || !defined(STM32_NR_INTERRUPTS) || \ + !defined(STM32_NR_GPIO_PORTS) || !defined(STM32_DELAY_US_MULT) || \ + !defined(STM32_SRAM_END) || !defined(STM32_HAVE_FSMC) || \ + !defined(STM32_HAVE_USB)) +#error "Bad STM32F1 configuration. Check <series/stm32.h> header for your MCU." +#endif + #ifdef __DOXYGEN_PREDEFINED_HACK /* diff --git a/libmaple/stm32f1/include/series/stm32.h b/libmaple/stm32f1/include/series/stm32.h index c122df0..eaf9287 100644 --- a/libmaple/stm32f1/include/series/stm32.h +++ b/libmaple/stm32f1/include/series/stm32.h @@ -38,6 +38,17 @@ extern "C" { #define STM32_MCU_SERIES STM32_SERIES_F1 +/* The STM32F1 series is subdivided into "lines". libmaple currently + * officially supports STM32F103 performance line MCUs (see the + * MCU-specific value section below). + * + * You can use these F1 line defines if porting libmaple to support + * MCUs on other lines. */ +#define STM32_F1_LINE_PERFORMANCE 0 +#define STM32_F1_LINE_VALUE 1 +#define STM32_F1_LINE_ACCESS 2 +#define STM32_F1_LINE_CONNECTIVITY 3 + /* * MCU-specific values. * @@ -48,23 +59,31 @@ extern "C" { */ #if defined(MCU_STM32F103RB) +# define STM32_F1_LINE STM32_F1_LINE_PERFORMANCE # define STM32_NR_GPIO_PORTS 4 # define STM32_SRAM_END ((void*)0x20005000) +# define STM32_MEDIUM_DENSITY #elif defined(MCU_STM32F103ZE) +# define STM32_F1_LINE STM32_F1_LINE_PERFORMANCE # define STM32_NR_GPIO_PORTS 7 # define STM32_SRAM_END ((void*)0x20010000) +# define STM32_HIGH_DENSITY #elif defined(MCU_STM32F103CB) +# define STM32_F1_LINE STM32_F1_LINE_PERFORMANCE /* This STM32_NR_GPIO_PORTS is not strictly true, but only pins 0 * and exist, and they're used for OSC (e.g. on e.g. LeafLabs * Maple Mini), so we'll live with this for now. */ # define STM32_NR_GPIO_PORTS 3 # define STM32_SRAM_END ((void*)0x20005000) +# define STM32_MEDIUM_DENSITY #elif defined(MCU_STM32F103RE) +# define STM32_F1_LINE STM32_F1_LINE_PERFORMANCE # define STM32_NR_GPIO_PORTS 4 # define STM32_SRAM_END ((void*)0x20010000) +# define STM32_HIGH_DENSITY #else #error "Unrecognized STM32F1 MCU, or no MCU specified. Add something like " \ @@ -72,46 +91,65 @@ extern "C" { #endif /* - * Clock configuration. + * Derived values. */ -#ifndef STM32_PCLK1 -#define STM32_PCLK1 36000000U -#endif +#if STM32_F1_LINE == STM32_F1_LINE_PERFORMANCE + /* All supported performance line MCUs have a USB peripheral */ +# define STM32_HAVE_USB 1 + +# ifdef STM32_MEDIUM_DENSITY +# define STM32_NR_INTERRUPTS 43 +# define STM32_HAVE_FSMC 0 +# elif defined(STM32_HIGH_DENSITY) +# define STM32_NR_INTERRUPTS 60 +# define STM32_HAVE_FSMC 1 +# endif + +#elif STM32_F1_LINE == STM32_F1_LINE_VALUE + /* Value line MCUs don't have USB peripherals. */ +# define STM32_HAVE_USB 0 + +# ifdef STM32_MEDIUM_DENSITY +# define STM32_NR_INTERRUPTS 56 +# define STM32_HAVE_FSMC 0 +# elif defined(STM32_HIGH_DENSITY) + /* 61 interrupts here counts the possibility for a remapped + * DMA2 channel 5 IRQ occurring at NVIC index 60. */ +# define STM32_NR_INTERRUPTS 61 +# define STM32_HAVE_FSMC 1 +# endif -#ifndef STM32_PCLK2 -#define STM32_PCLK2 72000000U -#endif - -#ifndef STM32_DELAY_US_MULT -#define STM32_DELAY_US_MULT 12 /* FIXME: value is incorrect. */ #endif /* - * Density-specific values. + * Clock configuration. + * + * We've currently got values for F103 MCUs operating at the fastest + * possible speeds. + * + * You can patch these for your line, MCU, clock configuration, + * etc. here or by setting cflags when compiling libmaple. */ -#ifdef STM32_MEDIUM_DENSITY -# ifndef STM32_NR_INTERRUPTS -# define STM32_NR_INTERRUPTS 43 -# endif - -# ifndef STM32_HAVE_FSMC -# define STM32_HAVE_FSMC 0 -# endif - -#elif defined(STM32_HIGH_DENSITY) -# ifndef STM32_NR_INTERRUPTS -# define STM32_NR_INTERRUPTS 60 -# endif - -# ifndef STM32_HAVE_FSMC -# define STM32_HAVE_FSMC 1 -# endif +#if STM32_F1_LINE == STM32_F1_LINE_PERFORMANCE +# ifndef STM32_PCLK1 +# define STM32_PCLK1 36000000U +# endif +# ifndef STM32_PCLK2 +# define STM32_PCLK2 72000000U +# endif +# ifndef STM32_DELAY_US_MULT +# define STM32_DELAY_US_MULT 12 /* FIXME: value is incorrect. */ +# endif +#elif STM32_F1_LINE == STM32_F1_LINE_VALUE /* TODO */ +#elif STM32_F1_LINE == STM32_F1_LINE_ACCESS /* TODO */ +#elif STM32_F1_LINE == STM32_F1_LINE_CONNECTIVITY /* TODO */ +#endif -#else -#error "Unsupported STM32F1 density, or no density specified. Add something " \ - "like -DSTM32_MEDIUM_DENSITY to your compiler arguments." +/* Make sure we have the F1-specific defines we need. */ +#if !defined(STM32_F1_LINE) +#error "Bad STM32F1 configuration. Check STM32F1 <series/stm32.h> header." #endif #ifdef __cplusplus diff --git a/libmaple/stm32f2/include/series/stm32.h b/libmaple/stm32f2/include/series/stm32.h index 222608d..5ab4c56 100644 --- a/libmaple/stm32f2/include/series/stm32.h +++ b/libmaple/stm32f2/include/series/stm32.h @@ -59,6 +59,7 @@ extern "C" { #define STM32_MCU_SERIES STM32_SERIES_F2 #define STM32_NR_INTERRUPTS 81 #define STM32_HAVE_FSMC 1 +#define STM32_HAVE_USB 1 #if defined(MCU_STM32F207IC) || defined(MCU_STM32F207IG) # define STM32_NR_GPIO_PORTS 9 |