diff options
Diffstat (limited to 'libmaple/stm32f1/include')
| -rw-r--r-- | libmaple/stm32f1/include/series/gpio.h | 185 |
1 files changed, 85 insertions, 100 deletions
diff --git a/libmaple/stm32f1/include/series/gpio.h b/libmaple/stm32f1/include/series/gpio.h index 0ca6d56..ec4a39c 100644 --- a/libmaple/stm32f1/include/series/gpio.h +++ b/libmaple/stm32f1/include/series/gpio.h @@ -28,9 +28,7 @@ /** * @file libmaple/stm32f1/include/series/gpio.h * @brief STM32F1 GPIO and AFIO support. - * - * General purpose I/O (GPIO) and Alternate Function I/O (AFIO) - * prototypes, defines, and support functions. + * General purpose I/O (GPIO) and Alternate Function I/O (AFIO). */ #ifndef _LIBMAPLE_STM32F1_GPIO_H_ @@ -119,24 +117,22 @@ extern struct gpio_dev* const GPIOG; * use direct register access. */ typedef enum gpio_pin_mode { - GPIO_OUTPUT_PP = (GPIO_CR_CNF_OUTPUT_PP | - GPIO_CR_MODE_OUTPUT_50MHZ), /**< Output push-pull. */ - GPIO_OUTPUT_OD = (GPIO_CR_CNF_OUTPUT_OD | - GPIO_CR_MODE_OUTPUT_50MHZ), /**< Output open-drain. */ - GPIO_AF_OUTPUT_PP = (GPIO_CR_CNF_AF_OUTPUT_PP | - GPIO_CR_MODE_OUTPUT_50MHZ), /**< Alternate function - output push-pull. */ - GPIO_AF_OUTPUT_OD = (GPIO_CR_CNF_AF_OUTPUT_OD | - GPIO_CR_MODE_OUTPUT_50MHZ), /**< Alternate function - output open drain. */ - GPIO_INPUT_ANALOG = (GPIO_CR_CNF_INPUT_ANALOG | - GPIO_CR_MODE_INPUT), /**< Analog input. */ - GPIO_INPUT_FLOATING = (GPIO_CR_CNF_INPUT_FLOATING | - GPIO_CR_MODE_INPUT), /**< Input floating. */ - GPIO_INPUT_PD = (GPIO_CR_CNF_INPUT_PU_PD | - GPIO_CR_MODE_INPUT), /**< Input pull-down. */ - GPIO_INPUT_PU /**< Input pull-up. */ - /* GPIO_INPUT_PU treated as a special case, for ODR twiddling */ + /** Output push-pull. */ + GPIO_OUTPUT_PP = GPIO_CR_CNF_OUTPUT_PP | GPIO_CR_MODE_OUTPUT_50MHZ, + /** Output open-drain. */ + GPIO_OUTPUT_OD = GPIO_CR_CNF_OUTPUT_OD | GPIO_CR_MODE_OUTPUT_50MHZ, + /** Alternate function output push-pull. */ + GPIO_AF_OUTPUT_PP = GPIO_CR_CNF_AF_OUTPUT_PP | GPIO_CR_MODE_OUTPUT_50MHZ, + /** Alternate function output open drain. */ + GPIO_AF_OUTPUT_OD = GPIO_CR_CNF_AF_OUTPUT_OD | GPIO_CR_MODE_OUTPUT_50MHZ, + /** Analog input. */ + GPIO_INPUT_ANALOG = GPIO_CR_CNF_INPUT_ANALOG | GPIO_CR_MODE_INPUT, + /** Input floating. */ + GPIO_INPUT_FLOATING = GPIO_CR_CNF_INPUT_FLOATING | GPIO_CR_MODE_INPUT, + /** Input pull-down. */ + GPIO_INPUT_PD = GPIO_CR_CNF_INPUT_PU_PD | GPIO_CR_MODE_INPUT, + /** Input pull-up. */ + GPIO_INPUT_PU, /* (treated a special case, for ODR twiddling) */ } gpio_pin_mode; /* @@ -145,19 +141,14 @@ typedef enum gpio_pin_mode { /** AFIO register map */ typedef struct afio_reg_map { - __io uint32 EVCR; /**< Event control register. */ - __io uint32 MAPR; /**< AF remap and debug I/O configuration - register. */ - __io uint32 EXTICR1; /**< External interrupt configuration - register 1. */ - __io uint32 EXTICR2; /**< External interrupt configuration - register 2. */ - __io uint32 EXTICR3; /**< External interrupt configuration - register 3. */ - __io uint32 EXTICR4; /**< External interrupt configuration - register 4. */ - __io uint32 MAPR2; /**< AF remap and debug I/O configuration - register 2. */ + __io uint32 EVCR; /**< Event control register. */ + __io uint32 MAPR; /**< AF remap and debug I/O configuration register. */ + __io uint32 EXTICR1; /**< External interrupt configuration register 1. */ + __io uint32 EXTICR2; /**< External interrupt configuration register 2. */ + __io uint32 EXTICR3; /**< External interrupt configuration register 3. */ + __io uint32 EXTICR4; /**< External interrupt configuration register 4. */ + __io uint32 MAPR2; /**< + * AF remap and debug I/O configuration register 2. */ } afio_reg_map; /** AFIO register map base pointer. */ @@ -326,62 +317,58 @@ void afio_init(void); * @see afio_remap() */ typedef enum afio_remap_peripheral { - AFIO_REMAP_ADC2_ETRGREG = AFIO_MAPR_ADC2_ETRGREG_REMAP, /**< - ADC 2 external trigger regular conversion remapping */ - AFIO_REMAP_ADC2_ETRGINJ = AFIO_MAPR_ADC2_ETRGINJ_REMAP, /**< - ADC 2 external trigger injected conversion remapping */ - AFIO_REMAP_ADC1_ETRGREG = AFIO_MAPR_ADC1_ETRGREG_REMAP, /**< - ADC 1 external trigger regular conversion remapping */ - AFIO_REMAP_ADC1_ETRGINJ = AFIO_MAPR_ADC1_ETRGINJ_REMAP, /**< - ADC 1 external trigger injected conversion remapping */ - AFIO_REMAP_TIM5CH4_I = AFIO_MAPR_TIM5CH4_IREMAP, /**< - Timer 5 channel 4 internal remapping */ - AFIO_REMAP_PD01 = AFIO_MAPR_PD01_REMAP, /**< - Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ - AFIO_REMAP_CAN_1 = AFIO_MAPR_CAN_REMAP_PB8_PB9, /**< - CAN alternate function remapping 1 (RX on PB8, TX on PB9) */ - AFIO_REMAP_CAN_2 = AFIO_MAPR_CAN_REMAP_PD0_PD1, /**< - CAN alternate function remapping 2 (RX on PD0, TX on PD1) */ - AFIO_REMAP_TIM4 = AFIO_MAPR_TIM4_REMAP, /**< - Timer 4 remapping */ - AFIO_REMAP_TIM3_PARTIAL = AFIO_MAPR_TIM3_REMAP_PARTIAL, /**< - Timer 3 partial remapping */ - AFIO_REMAP_TIM3_FULL = AFIO_MAPR_TIM3_REMAP_FULL, /**< - Timer 3 full remapping */ - AFIO_REMAP_TIM2_PARTIAL_1 = AFIO_MAPR_TIM2_REMAP_PA15_PB3_PA2_PA3, /**< - Timer 2 partial remapping 1 (CH1 and ETR on PA15, CH2 on PB3, CH3 - on PA2, CH4 on PA3) */ - AFIO_REMAP_TIM2_PARTIAL_2 = AFIO_MAPR_TIM2_REMAP_PA0_PA1_PB10_PB11, /**< - Timer 2 partial remapping 2 (CH1 and ETR on PA0, CH2 on PA1, CH3 - on PB10, CH4 on PB11) */ - AFIO_REMAP_TIM2_FULL = AFIO_MAPR_TIM2_REMAP_FULL, /**< - Timer 2 full remapping */ - AFIO_REMAP_USART2 = AFIO_MAPR_USART2_REMAP, /**< - USART 2 remapping */ - AFIO_REMAP_USART1 = AFIO_MAPR_USART1_REMAP, /**< - USART 1 remapping */ - AFIO_REMAP_I2C1 = AFIO_MAPR_I2C1_REMAP, /**< - I2C 1 remapping */ - AFIO_REMAP_SPI1 = AFIO_MAPR_SPI1_REMAP, /**< - SPI 1 remapping */ - AFIO_REMAP_FSMC_NADV = (AFIO_MAPR2_FSMC_NADV | - AFIO_REMAP_USE_MAPR2), /**< - NADV signal not connected */ - AFIO_REMAP_TIM14 = (AFIO_MAPR2_TIM14_REMAP | - AFIO_REMAP_USE_MAPR2), /**< - Timer 14 remapping */ - AFIO_REMAP_TIM13 = (AFIO_MAPR2_TIM13_REMAP | - AFIO_REMAP_USE_MAPR2), /**< - Timer 13 remapping */ - AFIO_REMAP_TIM11 = (AFIO_MAPR2_TIM11_REMAP | - AFIO_REMAP_USE_MAPR2), /**< - Timer 11 remapping */ - AFIO_REMAP_TIM10 = (AFIO_MAPR2_TIM10_REMAP | - AFIO_REMAP_USE_MAPR2), /**< - Timer 10 remapping */ - AFIO_REMAP_TIM9 = (AFIO_MAPR2_TIM9_REMAP | - AFIO_REMAP_USE_MAPR2) /**< - Timer 9 */ + /** ADC 2 external trigger regular conversion remapping */ + AFIO_REMAP_ADC2_ETRGREG = AFIO_MAPR_ADC2_ETRGREG_REMAP, + /** ADC 2 external trigger injected conversion remapping */ + AFIO_REMAP_ADC2_ETRGINJ = AFIO_MAPR_ADC2_ETRGINJ_REMAP, + /** ADC 1 external trigger regular conversion remapping */ + AFIO_REMAP_ADC1_ETRGREG = AFIO_MAPR_ADC1_ETRGREG_REMAP, + /** ADC 1 external trigger injected conversion remapping */ + AFIO_REMAP_ADC1_ETRGINJ = AFIO_MAPR_ADC1_ETRGINJ_REMAP, + /** Timer 5 channel 4 internal remapping */ + AFIO_REMAP_TIM5CH4_I = AFIO_MAPR_TIM5CH4_IREMAP, + /** Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ + AFIO_REMAP_PD01 = AFIO_MAPR_PD01_REMAP, + /** CAN alternate function remapping 1 (RX on PB8, TX on PB9) */ + AFIO_REMAP_CAN_1 = AFIO_MAPR_CAN_REMAP_PB8_PB9, + /** CAN alternate function remapping 2 (RX on PD0, TX on PD1) */ + AFIO_REMAP_CAN_2 = AFIO_MAPR_CAN_REMAP_PD0_PD1, + /** Timer 4 remapping */ + AFIO_REMAP_TIM4 = AFIO_MAPR_TIM4_REMAP, + /** Timer 3 partial remapping */ + AFIO_REMAP_TIM3_PARTIAL = AFIO_MAPR_TIM3_REMAP_PARTIAL, + /** Timer 3 full remapping */ + AFIO_REMAP_TIM3_FULL = AFIO_MAPR_TIM3_REMAP_FULL, + /** + * Timer 2 partial remapping 1 (CH1 and ETR on PA15, CH2 on PB3, + * CH3 on PA2, CH4 on PA3) */ + AFIO_REMAP_TIM2_PARTIAL_1 = AFIO_MAPR_TIM2_REMAP_PA15_PB3_PA2_PA3, + /** + * Timer 2 partial remapping 2 (CH1 and ETR on PA0, CH2 on PA1, + * CH3 on PB10, CH4 on PB11) */ + AFIO_REMAP_TIM2_PARTIAL_2 = AFIO_MAPR_TIM2_REMAP_PA0_PA1_PB10_PB11, + /** Timer 2 full remapping */ + AFIO_REMAP_TIM2_FULL = AFIO_MAPR_TIM2_REMAP_FULL, + /** USART 2 remapping */ + AFIO_REMAP_USART2 = AFIO_MAPR_USART2_REMAP, + /** USART 1 remapping */ + AFIO_REMAP_USART1 = AFIO_MAPR_USART1_REMAP, + /** I2C 1 remapping */ + AFIO_REMAP_I2C1 = AFIO_MAPR_I2C1_REMAP, + /** SPI 1 remapping */ + AFIO_REMAP_SPI1 = AFIO_MAPR_SPI1_REMAP, + /** NADV signal not connected */ + AFIO_REMAP_FSMC_NADV = AFIO_MAPR2_FSMC_NADV | AFIO_REMAP_USE_MAPR2, + /** Timer 14 remapping */ + AFIO_REMAP_TIM14 = AFIO_MAPR2_TIM14_REMAP | AFIO_REMAP_USE_MAPR2, + /** Timer 13 remapping */ + AFIO_REMAP_TIM13 = AFIO_MAPR2_TIM13_REMAP | AFIO_REMAP_USE_MAPR2, + /** Timer 11 remapping */ + AFIO_REMAP_TIM11 = AFIO_MAPR2_TIM11_REMAP | AFIO_REMAP_USE_MAPR2, + /** Timer 10 remapping */ + AFIO_REMAP_TIM10 = AFIO_MAPR2_TIM10_REMAP | AFIO_REMAP_USE_MAPR2, + /** Timer 9 remapping */ + AFIO_REMAP_TIM9 = AFIO_MAPR2_TIM9_REMAP | AFIO_REMAP_USE_MAPR2, } afio_remap_peripheral; void afio_remap(afio_remap_peripheral p); @@ -395,16 +382,14 @@ void afio_remap(afio_remap_peripheral p); * @see afio_cfg_debug_ports() */ typedef enum afio_debug_cfg { - AFIO_DEBUG_FULL_SWJ = AFIO_MAPR_SWJ_CFG_FULL_SWJ, /**< - Full Serial Wire and JTAG debug */ - AFIO_DEBUG_FULL_SWJ_NO_NJRST = AFIO_MAPR_SWJ_CFG_FULL_SWJ_NO_NJRST, /**< - Full Serial Wire and JTAG, but no NJTRST. */ - AFIO_DEBUG_SW_ONLY = AFIO_MAPR_SWJ_CFG_NO_JTAG_SW, /**< - Serial Wire debug only (JTAG-DP disabled, - SW-DP enabled) */ - AFIO_DEBUG_NONE = AFIO_MAPR_SWJ_CFG_NO_JTAG_NO_SW /**< - No debug; all JTAG and SW pins are free - for use as GPIOs. */ + /** Full Serial Wire and JTAG debug */ + AFIO_DEBUG_FULL_SWJ = AFIO_MAPR_SWJ_CFG_FULL_SWJ, + /** Full Serial Wire and JTAG, but no NJTRST. */ + AFIO_DEBUG_FULL_SWJ_NO_NJRST = AFIO_MAPR_SWJ_CFG_FULL_SWJ_NO_NJRST, + /** Serial Wire debug only (JTAG-DP disabled, SW-DP enabled) */ + AFIO_DEBUG_SW_ONLY = AFIO_MAPR_SWJ_CFG_NO_JTAG_SW, + /** No debug; all JTAG and SW pins are free for use as GPIOs. */ + AFIO_DEBUG_NONE = AFIO_MAPR_SWJ_CFG_NO_JTAG_NO_SW, } afio_debug_cfg; /** |