aboutsummaryrefslogtreecommitdiffstats
path: root/libmaple/include
diff options
context:
space:
mode:
Diffstat (limited to 'libmaple/include')
-rw-r--r--libmaple/include/libmaple/stm32.h203
1 files changed, 68 insertions, 135 deletions
diff --git a/libmaple/include/libmaple/stm32.h b/libmaple/include/libmaple/stm32.h
index 53a5d7a..5efb670 100644
--- a/libmaple/include/libmaple/stm32.h
+++ b/libmaple/include/libmaple/stm32.h
@@ -36,162 +36,95 @@
extern "C" {
#endif
-/*
- * User-specific configuration.
- *
- * The #defines here depend upon how libmaple is used. Because of the
- * potential for a mismatch between them and the actual libmaple
- * usage, you should try to keep their number to an absolute minimum.
- */
+/* Everything enclosed in the following __DOXYGEN_PREDEFINED_HACK
+ * conditional block must be defined in the family header. */
+#include <family/stm32.h>
#ifdef __DOXYGEN_PREDEFINED_HACK
- /** @brief APB1 clock speed, in Hz. */
- #define STM32_PCLK1
- /** @brief APB2 clock speed, in Hz. */
- #define STM32_PCLK2
-
- /** Deprecated. Use STM32_PCLK1 instead. */
- #define PCLK1
- /** Deprecated. Use STM32_PCLK2 instead. */
- #define PCLK2
+/*
+ * Clock configuration.
+ *
+ * These defines depend upon how the MCU is configured. Because of
+ * the potential for a mismatch between them and the actual clock
+ * configuration, keep their number to a minimum.
+ */
-#endif
+/**
+ * @brief APB1 clock speed, in Hz.
+ */
+#define STM32_PCLK1
-#ifndef STM32_PCLK1
-#define STM32_PCLK1 36000000U
-#endif
-#ifndef PCLK1
-#define PCLK1 STM32_PCLK1
-#endif
-#if PCLK1 != STM32_PCLK1
-#error "(Deprecated) PCLK1 differs from STM32_PCLK1"
-#endif
+/**
+ * @brief APB2 clock speed, in Hz.
+ */
+#define STM32_PCLK2
-#ifndef STM32_PCLK2
-#define STM32_PCLK2 72000000U
-#endif
-#ifndef PCLK2
-#define PCLK2 STM32_PCLK2
-#endif
-#if PCLK2 != STM32_PCLK2
-#error "(Deprecated) PCLK2 differs from STM32_PCLK2"
-#endif
+/** @brief Deprecated. Use STM32_PCLK1 instead. */
+#define PCLK1
+/** @brief Deprecated. Use STM32_PCLK2 instead. */
+#define PCLK2
/*
- * Density-specific configuration.
+ * Family- and MCU-specific values.
*/
-#ifdef __DOXYGEN_PREDEFINED_HACK
-
- /**
- * @brief Number of interrupts in the NVIC.
- *
- * This define is automatically generated whenever the proper
- * density is defined (currently, this is restricted to defining
- * one of STM32_MEDIUM_DENSITY and STM32_HIGH_DENSITY).
- */
- #define STM32_NR_INTERRUPTS
+/**
+ * @brief Number of interrupts in the vector table.
+ *
+ * This does not include Cortex-M interrupts (NMI, HardFault, etc.).
+ */
+#define STM32_NR_INTERRUPTS
- /** Deprecated. Use STM32_NR_INTERRUPTS instead. */
- #define NR_INTERRUPTS
+/**
+ * Number of GPIO ports.
+ */
+#define STM32_NR_GPIO_PORTS
-#endif
+/**
+ * @brief Multiplier to convert microseconds into loop iterations
+ * in delay_us().
+ *
+ * @see delay_us()
+ */
+#define STM32_DELAY_US_MULT
-#ifdef STM32_MEDIUM_DENSITY
- #define STM32_NR_INTERRUPTS 43
-#elif defined(STM32_HIGH_DENSITY)
- #define STM32_NR_INTERRUPTS 60
-#else
-#error "No STM32 board type defined!"
-#endif
+/**
+ * @brief Pointer to end of built-in SRAM.
+ *
+ * Points to the address which is 1 byte past the last valid
+ * SRAM address.
+ */
+#define STM32_SRAM_END
-#define NR_INTERRUPTS STM32_NR_INTERRUPTS
+#endif /* __DOXYGEN_PREDEFINED_HACK */
/*
- * MCU-specific configuration.
+ * The following are for backwards compatibility only.
*/
-#ifdef __DOXYGEN_PREDEFINED_HACK
-
- /**
- * Number of GPIO ports.
- */
- #define STM32_NR_GPIO_PORTS
-
- /**
- * @brief Multiplier to convert microseconds into loop iterations
- * in delay_us().
- *
- * @see delay_us()
- */
- #define STM32_DELAY_US_MULT
-
- /**
- * @brief Pointer to end of built-in SRAM.
- *
- * Points to the address which is 1 byte past the last valid
- * SRAM address.
- */
- #define STM32_SRAM_END
-
- /** Deprecated. Use STM32_NR_GPIO_PORTS instead. */
- #define NR_GPIO_PORTS
- /** Deprecated. Use STM32_DELAY_US_MULT instead. */
- #define DELAY_US_MULT
-
+/* PCLK1 and PCLK2 are for backwards compatibility only; don't use in
+ * new code. */
+#ifndef PCLK1
+#define PCLK1 STM32_PCLK1
#endif
-
-#if defined(MCU_STM32F103RB)
- /* e.g., LeafLabs Maple */
-
- #define STM32_NR_GPIO_PORTS 4
- #define STM32_DELAY_US_MULT 12
- #define STM32_SRAM_END ((void*)0x20005000)
-
- #define NR_GPIO_PORTS STM32_NR_GPIO_PORTS
- #define DELAY_US_MULT STM32_DELAY_US_MULT
-
-#elif defined(MCU_STM32F103ZE)
- /* e.g., LeafLabs Maple Native */
-
- #define STM32_NR_GPIO_PORTS 7
- #define STM32_DELAY_US_MULT 12
- #define STM32_SRAM_END ((void*)0x20010000)
-
- #define NR_GPIO_PORTS STM32_NR_GPIO_PORTS
- #define DELAY_US_MULT STM32_DELAY_US_MULT
-
-#elif defined(MCU_STM32F103CB)
- /* e.g., LeafLabs Maple Mini */
-
- /* This STM32_NR_GPIO_PORTS value is not, strictly speaking, true.
- * But only pins 0 and 1 exist, and they're used for OSC on the
- * Mini, so we'll live with this for now. */
- #define STM32_NR_GPIO_PORTS 3
- #define STM32_DELAY_US_MULT 12
- #define STM32_SRAM_END ((void*)0x20005000)
-
- #define NR_GPIO_PORTS STM32_NR_GPIO_PORTS
- #define DELAY_US_MULT STM32_DELAY_US_MULT
-
-#elif defined(MCU_STM32F103RE)
- /* e.g., LeafLabs Maple RET6 edition */
-
- #define STM32_NR_GPIO_PORTS 4
- #define STM32_DELAY_US_MULT 12
- #define STM32_SRAM_END ((void*)0x20010000)
-
- #define NR_GPIO_PORTS STM32_NR_GPIO_PORTS
- #define DELAY_US_MULT STM32_DELAY_US_MULT
-
-#else
-
-#error "No MCU type specified. Add something like -DMCU_STM32F103RB " \
- "to your compiler arguments (probably in a Makefile)."
-
+#if PCLK1 != STM32_PCLK1
+#error "PCLK1 (which is deprecated) differs from STM32_PCLK1."
+#endif
+#ifndef PCLK2
+#define PCLK2 STM32_PCLK2
+#endif
+#if PCLK2 != STM32_PCLK2
+#error "PCLK2 (which is deprecated) differs from STM32_PCLK2."
#endif
+/** @brief Deprecated. Use STM32_NR_INTERRUPTS instead. */
+#define NR_INTERRUPTS STM32_NR_INTERRUPTS
+/** @brief Deprecated. Use STM32_NR_GPIO_PORTS instead. */
+#define NR_GPIO_PORTS STM32_NR_GPIO_PORTS
+/** @brief Deprecated. Use STM32_DELAY_US_MULT instead. */
+#define DELAY_US_MULT STM32_DELAY_US_MULT
+
#ifdef __cplusplus
}
#endif