diff options
Diffstat (limited to 'libmaple/include')
| -rw-r--r-- | libmaple/include/libmaple/dac.h | 124 |
1 files changed, 56 insertions, 68 deletions
diff --git a/libmaple/include/libmaple/dac.h b/libmaple/include/libmaple/dac.h index 047f874..56bfdc4 100644 --- a/libmaple/include/libmaple/dac.h +++ b/libmaple/include/libmaple/dac.h @@ -1,7 +1,7 @@ /****************************************************************************** * The MIT License * - * Copyright (c) 2011 LeafLabs, LLC. + * Copyright (c) 2011, 2012 LeafLabs, LLC. * Copyright (c) 2010 Bryan Newbold. * * Permission is hereby granted, free of charge, to any person @@ -39,124 +39,112 @@ extern "C"{ #endif +#include <series/dac.h> #include <libmaple/libmaple_types.h> #include <libmaple/rcc.h> +#include <libmaple/stm32.h> /* - * Register maps + * Register map base and device pointers. + * + * The DACs are the same on all supported targets, so it's not worth + * repeating these in the series headers. */ -/** DAC register map. */ -typedef struct dac_reg_map { - __io uint32 CR; /**< Control register */ - __io uint32 SWTRIGR; /**< Software trigger register */ - __io uint32 DHR12R1; /**< Channel 1 12-bit right-aligned data - holding register */ - __io uint32 DHR12L1; /**< Channel 1 12-bit left-aligned data - holding register */ - __io uint32 DHR8R1; /**< Channel 1 8-bit left-aligned data - holding register */ - __io uint32 DHR12R2; /**< Channel 2 12-bit right-aligned data - holding register */ - __io uint32 DHR12L2; /**< Channel 2 12-bit left-aligned data - holding register */ - __io uint32 DHR8R2; /**< Channel 2 8-bit left-aligned data - holding register */ - __io uint32 DHR12RD; /**< Dual DAC 12-bit right-aligned data - holding register */ - __io uint32 DHR12LD; /**< Dual DAC 12-bit left-aligned data - holding register */ - __io uint32 DHR8RD; /**< Dual DAC 8-bit right-aligned data holding - register */ - __io uint32 DOR1; /**< Channel 1 data output register */ - __io uint32 DOR2; /**< Channel 2 data output register */ -} dac_reg_map; - -/** DAC register map base address */ #define DAC_BASE ((struct dac_reg_map*)0x40007400) -/* - * Devices - */ - /** DAC device type. */ typedef struct dac_dev { dac_reg_map *regs; /**< Register map */ } dac_dev; +#if STM32_HAVE_DAC extern const dac_dev *DAC; +#endif /* * Register bit definitions */ /* Control register */ + /* Channel 1 control */ -#define DAC_CR_EN1 BIT(0) /* Enable */ -#define DAC_CR_BOFF1 BIT(1) /* Output buffer disable */ -#define DAC_CR_TEN1 BIT(2) /* Trigger enable */ -#define DAC_CR_TSEL1 (0x7 << 3) /* Trigger selection */ -#define DAC_CR_WAVE1 (0x3 << 6) /* Noise/triangle wave enable */ -#define DAC_CR_MAMP1 (0xF << 8) /* Mask/amplitude selector */ -#define DAC_CR_DMAEN1 BIT(12) /* DMA enable */ +#define DAC_CR_EN1 (1U << 0) /* Enable */ +#define DAC_CR_BOFF1 (1U << 1) /* Output buffer disable */ +#define DAC_CR_TEN1 (1U << 2) /* Trigger enable */ +#define DAC_CR_TSEL1 (0x7 << 3) /* Trigger selection */ +#define DAC_CR_WAVE1 (0x3 << 6) /* Noise/triangle wave */ +#define DAC_CR_MAMP1 (0xF << 8) /* Mask/amplitude selector */ +#define DAC_CR_DMAEN1 (1U << 12) /* DMA enable */ /* Channel 2 control */ -#define DAC_CR_EN2 BIT(16) /* Enable */ -#define DAC_CR_BOFF2 BIT(17) /* Output buffer disable */ -#define DAC_CR_TEN2 BIT(18) /* Trigger enable */ -#define DAC_CR_TSEL2 (0x7 << 19) /* Trigger selection */ -#define DAC_CR_WAVE2 (0x3 << 22) /* Noise/triangle wave generation*/ -#define DAC_CR_MAMP2 (0xF << 24) /* Mask/amplitude selector */ -#define DAC_CR_DMAEN2 BIT(28) /* DMA enable */ +#define DAC_CR_EN2 (1U << 16) /* Enable */ +#define DAC_CR_BOFF2 (1U << 17) /* Output buffer disable */ +#define DAC_CR_TEN2 (1U << 18) /* Trigger enable */ +#define DAC_CR_TSEL2 (0x7 << 19) /* Trigger selection */ +#define DAC_CR_WAVE2 (0x3 << 22) /* Noise/triangle wave */ +#define DAC_CR_MAMP2 (0xF << 24) /* Mask/amplitude selector */ +#define DAC_CR_DMAEN2 (1U << 28) /* DMA enable */ /* Software trigger register */ -#define DAC_SWTRIGR_SWTRIG1 BIT(0) /* Channel 1 software trigger */ -#define DAC_SWTRIGR_SWTRIG2 BIT(1) /* Channel 2 software trigger */ + +#define DAC_SWTRIGR_SWTRIG1 (1U << 0) /* Channel 1 software trigger */ +#define DAC_SWTRIGR_SWTRIG2 (1U << 1) /* Channel 2 software trigger */ /* Channel 1 12-bit right-aligned data holding register */ -#define DAC_DHR12R1_DACC1DHR 0x00000FFF + +#define DAC_DHR12R1_DACC1DHR 0x00000FFF /* Channel 1 12-bit left-aligned data holding register */ -#define DAC_DHR12L1_DACC1DHR 0x0000FFF0 + +#define DAC_DHR12L1_DACC1DHR 0x0000FFF0 /* Channel 1 8-bit left-aligned data holding register */ -#define DAC_DHR8R1_DACC1DHR 0x000000FF + +#define DAC_DHR8R1_DACC1DHR 0x000000FF /* Channel 2 12-bit right-aligned data holding register */ -#define DAC_DHR12R2_DACC2DHR 0x00000FFF + +#define DAC_DHR12R2_DACC2DHR 0x00000FFF /* Channel 2 12-bit left-aligned data holding register */ -#define DAC_DHR12L2_DACC2DHR 0x0000FFF0 + +#define DAC_DHR12L2_DACC2DHR 0x0000FFF0 /* Channel 2 8-bit left-aligned data holding register */ -#define DAC_DHR8R2_DACC2DHR 0x000000FF + +#define DAC_DHR8R2_DACC2DHR 0x000000FF /* Dual DAC 12-bit right-aligned data holding register */ -#define DAC_DHR12RD_DACC1DHR 0x00000FFF -#define DAC_DHR12RD_DACC2DHR 0x0FFF0000 + +#define DAC_DHR12RD_DACC1DHR 0x00000FFF +#define DAC_DHR12RD_DACC2DHR 0x0FFF0000 /* Dual DAC 12-bit left-aligned data holding register */ -#define DAC_DHR12LD_DACC1DHR 0x0000FFF0 -#define DAC_DHR12LD_DACC2DHR 0xFFF00000 + +#define DAC_DHR12LD_DACC1DHR 0x0000FFF0 +#define DAC_DHR12LD_DACC2DHR 0xFFF00000 /* Dual DAC 8-bit left-aligned data holding register */ -#define DAC_DHR8RD_DACC1DHR 0x000000FF -#define DAC_DHR8RD_DACC2DHR 0x0000FF00 + +#define DAC_DHR8RD_DACC1DHR 0x000000FF +#define DAC_DHR8RD_DACC2DHR 0x0000FF00 /* Channel 1 data output register */ -#define DAC_DOR1_DACC1DOR 0x00000FFF + +#define DAC_DOR1_DACC1DOR 0x00000FFF /* Channel 1 data output register */ -#define DAC_DOR2_DACC2DOR 0x00000FFF + +#define DAC_DOR2_DACC2DOR 0x00000FFF /* - * Convenience functions + * Routines */ -/* We take the dev argument in these convenience functions for - * future-proofing */ +/* We take the dev argument in these for future-proofing */ -#define DAC_CH1 0x1 -#define DAC_CH2 0x2 +#define DAC_CH1 0x1 +#define DAC_CH2 0x2 void dac_init(const dac_dev *dev, uint32 flags); void dac_write_channel(const dac_dev *dev, uint8 channel, uint16 val); |