1 files changed, 0 insertions, 52 deletions
diff --git a/libmaple/include/libmaple/i2c.h b/libmaple/include/libmaple/i2c.h
index d4eac61..ff1c313 100644
--- a/libmaple/include/libmaple/i2c.h
+++ b/libmaple/include/libmaple/i2c.h
@@ -93,7 +93,6 @@ typedef struct i2c_msg {
 
 #define I2C_MSG_READ            0x1
 #define I2C_MSG_10BIT_ADDR      0x2
-
     /**
      * Bitwise OR of:
      * - I2C_MSG_READ (write is default)
@@ -198,10 +197,6 @@ typedef struct i2c_msg {
 #define I2C_DUTY_16_9           0x2           // 16/9 duty ratio
 /* Flag 0x4 is reserved; DO NOT USE. */
 #define I2C_BUS_RESET           0x8           // Perform a bus reset
-#define I2C_SLAVE_USE_RX_BUFFER 0x10          // Use a buffered message when doing a slave recv
-#define I2C_SLAVE_USE_TX_BUFFER 0x20          // Use a buffered message when doing a slave transmit
-#define I2C_SLAVE_DUAL_ADDRESS  0x40          // Enable the dual slave address scheme
-#define I2C_SLAVE_GENERAL_CALL  0x80          // Enable the dual slave address scheme
 void i2c_master_enable(i2c_dev *dev, uint32 flags);
 
 #define I2C_ERROR_PROTOCOL      (-1)
@@ -411,53 +406,6 @@ static inline void i2c_set_trise(i2c_dev *dev, uint32 trise) {
     dev->regs->TRISE = trise;
 }
 
-/* Barry Carter
- * Slave support
- */
-
-/**
- * @brief Enable Dual addressing mode to allow peripheral to have 2 addresses
- * @param dev I2C device
-  */
-static inline void i2c_slave_dual_address_enable(i2c_dev *dev) {
-    dev->regs->OAR2 |= I2C_OAR2_ENDUAL;
-}
-
-/**
- * @brief Enable General Call to allow the  unit to respond on addr 0x00
- * @param dev I2C device
-  */
-static inline void i2c_slave_general_call_enable(i2c_dev *dev) {
-    dev->regs->CR1 |= I2C_CR1_ENGC;
-}
-
-/* callback functions */
-/* Callback handler for data received over the bus */
-void i2c_slave_attach_recv_handler(i2c_dev *dev, i2c_msg *msg, i2c_slave_recv_callback_func func);
-
-/* Callback handler for data being requested over the bus
- * The callback function must call i2c_write to get the data over the bus
- */
-void i2c_slave_attach_transmit_handler(i2c_dev *dev, i2c_msg *msg, i2c_slave_transmit_callback_func func);
-
-/**
- * @brief Set the primary I2c slave address
- * @param dev I2C device
- * @param address the 8 or 10 bit i2c address
-  */
-static inline void i2c_slave_set_own_address(i2c_dev *dev, uint16 address) {
-    dev->regs->OAR1 = address <<1;
-}
-
-/**
- * @brief Set the secondary I2c slave address
- * @param dev I2C device
- * @param address the 8 or 10 bit i2c address
-  */
-static inline void i2c_slave_set_own_address2(i2c_dev *dev, uint16 address) {
-dev->regs->OAR2 = (address <<1 ) | I2C_OAR2_ENDUAL;
-}
-
 #ifdef __cplusplus
 }
 #endif