1 files changed, 40 insertions, 34 deletions

diff --git a/examples/test-serialusb.cpp b/examples/test-serialusb.cpp
index 678c2b9..9d0a862 100644
--- a/examples/test-serialusb.cpp
+++ b/examples/test-serialusb.cpp
@@ -1,10 +1,11 @@
-// Tests SerialUSB functionality.
+// Sample main.cpp file. Blinks an LED, sends a message out USART2
+// and turns on PWM on pin 2
 
 #include "wirish.h"
 #include "usb.h"
 
-#define LED_PIN BOARD_LED_PIN
-#define BUT_PIN BOARD_BUTTON_PIN
+#define LED_PIN 13
+#define BUT_PIN 38
 
 uint32 state = 0;
 #define QUICKPRINT  0
@@ -13,29 +14,33 @@ uint32 state = 0;
 #define SIMPLE      3
 #define ONOFF       4
 
-void setup() {
+
+void setup()
+{
     /* Set up the LED to blink  */
     pinMode(LED_PIN, OUTPUT);
 
     /* Set up the Button */
-    pinMode(BUT_PIN, INPUT);
+    pinMode(BUT_PIN, INPUT_PULLUP);
 
     Serial2.begin(9600);
-    Serial2.println("This is the debug channel. Press BUT.");
-
-    waitForButtonPress(0);
+    Serial2.println("Hello world! This is the debug channel.");
 }
 
+int toggle = 0;
+
 uint8 c1 = '-';
 
 void loop() {
-    toggleLED();
+    toggle ^= 1;
+    digitalWrite(LED_PIN, toggle);
     delay(1000);
 
-    if(isButtonPressed()) {
+    if(digitalRead(BUT_PIN)) {
+        while(digitalRead(BUT_PIN)) {};
         state++;
     }
-
+    
     switch(state) {
         case QUICKPRINT:
             for(int i = 0; i<30; i++) {
@@ -43,34 +48,34 @@ void loop() {
                 SerialUSB.print('.');
                 SerialUSB.print('|');
             }
-            Serial2.println(SerialUSB.pending(), DEC);
+            Serial2.println(SerialUSB.pending(),DEC);
             SerialUSB.println();
             break;
         case BIGSTUFF:
-            SerialUSB.println("0123456789012345678901234567890123456789"
-                              "0123456789012345678901234567890123456789"
-                              "012345678901234567890");
-            SerialUSB.println((int64)123456789, DEC);
+            SerialUSB.println("01234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890");
+            SerialUSB.println((uint32)123456789,DEC);
             SerialUSB.println(3.1415926535);
-            Serial2.println(SerialUSB.pending(), DEC);
+            Serial2.println(SerialUSB.pending(),DEC);
             break;
         case NUMBERS:
             SerialUSB.println("Numbers! -----------------------------");
             Serial2.println("Numbers! -----------------------------");
             SerialUSB.println('1');
             Serial2.println('1');
-            SerialUSB.println(1, DEC);
-            Serial2.println(1, DEC);
-            SerialUSB.println(-1, DEC);
-            Serial2.println(-1, DEC);
+            SerialUSB.println(1,DEC);
+            Serial2.println(1,DEC);
+            SerialUSB.println(-1,DEC);
+            Serial2.println(-1,DEC);
             SerialUSB.println(3.14159265);
             Serial2.println(3.14159265);
-            SerialUSB.println(123456789, DEC);
-            Serial2.println(123456789, DEC);
-            SerialUSB.println(-123456789, DEC);
-            Serial2.println(-123456789, DEC);
-            SerialUSB.println(65535, HEX);
-            Serial2.println(65535, HEX);
+            SerialUSB.println(3.14159265,9);
+            Serial2.println(3.14159265,9);
+            SerialUSB.println(123456789,DEC);
+            Serial2.println(123456789,DEC);
+            SerialUSB.println(-123456789,DEC);
+            Serial2.println(-123456789,DEC);
+            SerialUSB.println(65535,HEX);
+            Serial2.println(65535,HEX);
             break;
         case SIMPLE:
             Serial2.println("Trying write('a')");
@@ -87,8 +92,8 @@ void loop() {
             SerialUSB.print("hij\n\r");
             SerialUSB.write(' ');
             SerialUSB.println();
-            Serial2.println("Trying println(123456789, DEC)");
-            SerialUSB.println(123456789, DEC);
+            Serial2.println("Trying println(123456789,DEC)");
+            SerialUSB.println(123456789);
             Serial2.println("Trying println(3.141592)");
             SerialUSB.println(3.141592);
             Serial2.println("Trying println(\"DONE\")");
@@ -98,12 +103,12 @@ void loop() {
             Serial2.println("Shutting down...");
             SerialUSB.println("Shutting down...");
             SerialUSB.end();
-            Serial2.println("Waiting 4 seconds...");
+            Serial2.println("Waiting 4seconds...");
             delay(4000);
             Serial2.println("Starting up...");
             SerialUSB.begin();
             SerialUSB.println("Hello World!");
-            Serial2.println("Waiting 4 seconds...");
+            Serial2.println("Waiting 4seconds...");
             delay(4000);
             state++;
             break;
@@ -113,12 +118,13 @@ void loop() {
 }
 
 // Force init to be called *first*, i.e. before static object allocation.
-// Otherwise, statically allocated objects that need libmaple may fail.
-__attribute__((constructor)) void premain() {
+// Otherwise, statically allocated object that need libmaple may fail.
+ __attribute__(( constructor )) void premain() {
     init();
 }
 
-int main(void) {
+int main(void)
+{
     setup();
 
     while (1) {