diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/source/lang/api/attachinterrupt.rst | 31 | ||||
| -rw-r--r-- | docs/source/lang/api/detachinterrupt.rst | 16 | ||||
| -rw-r--r-- | docs/source/lang/api/pwmwrite.rst | 13 | ||||
| -rw-r--r-- | docs/source/unix-toolchain.rst | 2 |
4 files changed, 40 insertions, 22 deletions
diff --git a/docs/source/lang/api/attachinterrupt.rst b/docs/source/lang/api/attachinterrupt.rst index 0b8907f..7c5a6c7 100644 --- a/docs/source/lang/api/attachinterrupt.rst +++ b/docs/source/lang/api/attachinterrupt.rst @@ -15,7 +15,28 @@ occurs. Library Documentation --------------------- -.. doxygenfunction:: attachInterrupt +.. FIXME once breathe knows how to get the correct attachInterupt +.. (right now it's copying from HardwareTimer), replace with a +.. doxygenfunction directive + +.. cpp:function:: void attachInterrupt(uint8 pin, voidFuncPtr handler, ExtIntTriggerMode mode) + + Registers an interrupt handler on a pin. + + The interrupt will be triggered on a given transition on the pin, + as specified by the mode parameter. The handler runs in interrupt + context. The new handler will replace whatever handler is + currently registered for the pin, if any. + + *Parameters* + + - ``pin`` - Maple pin number + + - ``handler`` - Function to run upon external interrupt trigger. + The handler should take no arguments, and have void return type. + + - ``mode`` - Type of transition to trigger on, e.g. falling, + rising, etc. .. doxygenenum:: ExtIntTriggerMode @@ -34,7 +55,6 @@ There are a few constraints you should be aware of if you're using more than one interrupt at a time; the :ref:`external-interrupts` page has the details. - Using Interrupts ---------------- @@ -43,7 +63,6 @@ microcontroller programs, and can help solve timing problems. A good task for using an interrupt might be reading a rotary encoder, or monitoring user input. - If you wanted to insure that a program always caught the pulses from a rotary encoder, never missing a pulse, it would make it very tricky to write a program to do anything else, because the program @@ -55,7 +74,6 @@ sensor that is trying to catch a click, or an infrared slot sensor situations, using an interrupt can free the microcontroller to get some other work done while not missing the doorbell. - Example ------- @@ -78,7 +96,6 @@ Example state = !state; } - Arduino Compatibility --------------------- @@ -89,14 +106,10 @@ additional four: numbers 2 (pin 21), 3 (pin 20), 4 (pin 19), and 5 number goes with which pin -- just tell ``attachInterrupt()`` the pin you want. - See also -------- - - :ref:`detachInterrupt <lang-detachinterrupt>` - :ref:`external-interrupts` - - .. include:: cc-attribution.txt diff --git a/docs/source/lang/api/detachinterrupt.rst b/docs/source/lang/api/detachinterrupt.rst index adb2439..41642a7 100644 --- a/docs/source/lang/api/detachinterrupt.rst +++ b/docs/source/lang/api/detachinterrupt.rst @@ -6,11 +6,20 @@ detachInterrupt() Used to disable an interrupt specified with :ref:`lang-attachinterrupt`\ . - Library Documentation --------------------- -.. doxygenfunction:: detachInterrupt +.. FIXME once breathe knows how to get the correct detachInterupt +.. (right now it's copying from HardwareTimer), replace with a +.. doxygenfunction directive + +.. cpp:function:: void detachInterrupt(uint8 pin) + + Disable any registered external interrupt on the given pin. + + *Parameters* + + - ``pin`` Maple pin number Arduino Compatibility --------------------- @@ -31,7 +40,4 @@ See Also - :ref:`attachInterrupt() <lang-attachInterrupt>` - - - .. include:: cc-attribution.txt diff --git a/docs/source/lang/api/pwmwrite.rst b/docs/source/lang/api/pwmwrite.rst index 2c858ab..9d50077 100644 --- a/docs/source/lang/api/pwmwrite.rst +++ b/docs/source/lang/api/pwmwrite.rst @@ -33,21 +33,20 @@ Sets the output to the LED proportional to the value read from the potentiometer:: int analogPin = 3; // potentiometer connected to analog pin 3 - int val = 0; // variable to store the read value void setup() { pinMode(BOARD_LED_PIN, OUTPUT); // sets the LED pin as output - pinMode(analogPin, PWM); // sets the potentiometer pin as PWM - // output + pinMode(analogPin, INPUT_ANALOG); // sets the potentiometer pin as + // analog input } void loop() { - val = analogRead(analogPin); // read the input pin + int val = analogRead(analogPin); // read the input pin - analogWrite(BOARD_LED_PIN, val / 16); // analogRead values go from 0 - // to 4095, analogWrite values - // from 0 to 65535 + pwmWrite(BOARD_LED_PIN, val * 16); // analogRead values go from 0 + // to 4095, pwmWrite values + // from 0 to 65535, so scale roughly } See Also diff --git a/docs/source/unix-toolchain.rst b/docs/source/unix-toolchain.rst index e6039a2..b2cabbb 100644 --- a/docs/source/unix-toolchain.rst +++ b/docs/source/unix-toolchain.rst @@ -90,7 +90,7 @@ package; this could also be installed with `easy_install $ git clone git://github.com/leaflabs/libmaple.git libmaple $ cd libmaple $ wget http://static.leaflabs.com/pub/codesourcery/gcc-arm-none-eabi-latest-linux32.tar.gz - $ tar xvf arm-*-linux32.tar.gz + $ tar xvf gcc-arm-none-eabi-latest-linux32.tar.gz $ export PATH=$PATH:~/libmaple/arm/bin # or wherever these tools ended up This step is fairly straightforward: do a git clone of the `libmaple |