aboutsummaryrefslogtreecommitdiffstats
path: root/docs/source/arduino/serial.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/source/arduino/serial.rst')
-rw-r--r--docs/source/arduino/serial.rst68
1 files changed, 0 insertions, 68 deletions
diff --git a/docs/source/arduino/serial.rst b/docs/source/arduino/serial.rst
deleted file mode 100644
index 1bcd28d..0000000
--- a/docs/source/arduino/serial.rst
+++ /dev/null
@@ -1,68 +0,0 @@
-.. _arduino-serial:
-
-Serial
-======
-
-Used for communication between the Arduino board and a computer or
-other devices. All Arduino boards have at least one serial port
-(also known as a UART or USART): **Serial**. It communicates on
-digital pins 0 (RX) and 1 (TX) as well as with the computer via
-USB. Thus, if you use these functions, you cannot also use pins 0
-and 1 for digital input or output.
-
-
-
-You can use the Arduino environment's built-in serial monitor to
-communicate with an Arduino board. Click the serial monitor button
-in the toolbar and select the same baud rate used in the call to
-begin().
-
-
-
-The Arduino Mega has three additional serial ports: **Serial1** on
-pins 19 (RX) and 18 (TX), **Serial2** on pins 17 (RX) and 16 (TX),
-**Serial3** on pins 15 (RX) and 14 (TX). To use these pins to
-communicate with your personal computer, you will need an
-additional USB-to-serial adaptor, as they are not connected to the
-Mega's USB-to-serial adaptor. To use them to communicate with an
-external TTL serial device, connect the TX pin to your device's RX
-pin, the RX to your device's TX pin, and the ground of your Mega to
-your device's ground. (Don't connect these pins directly to an
-RS232 serial port; they operate at +/- 12V and can damage your
-Arduino board.)
-
-
-
-Functions
----------
-
-
-- `begin <http://arduino.cc/en/Serial/Begin>`_\ ()
-- `end <http://arduino.cc/en/Serial/End>`_\ ()
-- `available <http://arduino.cc/en/Serial/Available>`_\ ()
-- `read <http://arduino.cc/en/Serial/Read>`_\ ()
-- `flush <http://arduino.cc/en/Serial/Flush>`_\ ()
-- `print <http://arduino.cc/en/Serial/Print>`_\ ()
-
-.. _arduino-serial-println:
-
-- `println <http://arduino.cc/en/Serial/Println>`_\ ()
-- `write <http://arduino.cc/en/Serial/Write>`_\ ()
-
-
-
-Examples
---------
-
-
-- `ASCII Table <http://arduino.cc/en/Tutorial/ASCIITable>`_
-- `Dimmer <http://arduino.cc/en/Tutorial/Dimmer>`_
-- `Graph <http://arduino.cc/en/Tutorial/Graph>`_
-- `Physical Pixel <http://arduino.cc/en/Tutorial/PhysicalPixel>`_
-- `Virtual Color Mixer <http://arduino.cc/en/Tutorial/VirtualColorMixer>`_
-- `Serial Call Response <http://arduino.cc/en/Tutorial/SerialCallResponse>`_
-- `Serial Call Response ASCII <http://arduino.cc/en/Tutorial/SerialCallResponseASCII>`_
-
-
-
-.. include:: cc-attribution.txt \ No newline at end of file