aboutsummaryrefslogtreecommitdiffstats
path: root/docs/source/arduino/analogwrite.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/source/arduino/analogwrite.rst')
-rw-r--r--docs/source/arduino/analogwrite.rst164
1 files changed, 0 insertions, 164 deletions
diff --git a/docs/source/arduino/analogwrite.rst b/docs/source/arduino/analogwrite.rst
deleted file mode 100644
index a1057ab..0000000
--- a/docs/source/arduino/analogwrite.rst
+++ /dev/null
@@ -1,164 +0,0 @@
-.. highlight:: cpp
-
-.. _arduino-analogwrite:
-
-analogWrite()
-=============
-
-.. note::
-
- On the Maple, calling analogWrite() is the same as calling
- :ref:`wirish-pwmwrite`\ ; see that function's documentation for more
- information.
-
- This is because PWM is not true analog output (i.e., is not the
- output of a `DAC
- <http://en.wikipedia.org/wiki/Digital-to-analog_converter>`_\ ), so
- the function is badly named. For instance, **analogWrite() has
- absolutely nothing to do with** :ref:`arduino-analogread`\ , which
- is potentially confusing.
-
- The alias of analogWrite() to pwmWrite() is provided (sigh) for the
- sake of compatibility with Arduino, but we recommend using
- :ref:`wirish-pwmwrite` when writing new software, for clarity.
-
-.. contents:: Contents
- :local:
-
-Arduino Compatibility
----------------------
-
-There are a few important differences between Arduino's `analogWrite()
-<http://arduino.cc/en/Reference/AnalogWrite>`_ and Maple's
-:ref:`wirish-pwmwrite` that you should keep in mind. In each case, we
-have some recommendations you can use to help converting from Arduino
-to Maple.
-
-Difference 1: Duty cycle range is different
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-The first and most important difference is that the largest possible
-value for the duty cycle is much bigger on the Maple. Using Arduino's
-analogWrite(), the duty cycle ranges between 0--255 (always off --
-always on)\ [#fbytemax]_\ . Using Maple's pwmWrite(), the duty cycle
-ranges from 0--65,535 by default\ [#fuint16max]_\ .
-
-This is a good thing! The greater range of values on the Maple gives
-you much more precise control over the duty cycle of your PWM output.
-
-If you're porting code from the Arduino and want a quick-and-dirty
-fix, one solution is to :ref:`map <arduino-map>` the argument to
-analogWrite into the right range::
-
- // Arduino code:
- analogWrite(pin, duty);
-
- // Becomes Maple code:
- analogWrite(pin, map(duty, 0, 255, 0, 65535));
-
-This will convert values in the range 0-255 to values in the range
-0--65,635, which is the correct default range for all of the timers
-which control PWM output. See the :ref:`timers reference <timers>`
-for more information.
-
-Another fix is to consult the :ref:`pin mapping mega table
-<pin-mapping-mega table>` to find the timer which controls PWM on the
-pin you're using, then set that Timer's overflow to 255. Subsequent
-calls to analogWrite() should work as on the Arduino (with the same
-loss of precision). Note, however, that that affects the overflow for
-the **entire timer**, so other code relying on that timer (such as any
-:ref:`interrupts <arduino-attachinterrupt>` the timer controls) will
-likely need to be modified as well.
-
-Difference 2: You must use pinMode() to set up PWM
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-The second difference is that on the Maple, you **must** set up the pin
-for PWM output using :ref:`arduino-pinmode`\ , with argument ``PWM``.
-This should just be one extra line of code in your
-:ref:`arduino-setup` function. Example::
-
- void setup() {
- // set up pin 9 for PWM
- pinMode(9, PWM);
- }
-
-This also means that you can't later call :ref:`arduino-digitalread`
-or :ref:`arduino-digitalwrite` on that pin (unless some time in
-between, you use pinMode() to reconfigure that pin for ``INPUT`` or
-``OUTPUT``; see the :ref:`arduino-pinmode` page for more information).
-
-Difference 3: No PWM on pin 10
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-On the Maple, the pins which support PWM are: 0, 1, 2, 3, 5, 6, 7, 8,
-9, 11, 12, and 14, or twelve pins in total. That is at least as
-*many* PWM pins as any Arduino board, but there are differences in
-*which* pins support it.
-
-* On **most Arduino boards** (those with the ATmega168 or ATmega328;
- this includes the **Arduino Uno**), this function works on pins 3,
- 5, 6, 9, 10, and 11, or six pins total. Note that these boards
- support PWM on pin 10, while Maple does not.
-
-* On the **Arduino Mega**, PWM works on pins 2 through 13, or twelve pins
- total. Note that this board supports PWM on pins 4, 10, and 13,
- while the Maple does not. Maple supports PWM on pins 0, 1, and 14,
- which the Mega does not, making the total number of pins supporting
- PWM equal on these boards.
-
-* **Older Arduino boards** with an ATmega8 only support analogWrite() on
- pins 9, 10, and 11. Maple does not support PWM on pin 10.
-
-In all cases, Arduino boards support PWM on pin 10, unlike Maple. We
-did our best to make PWM as pin-compatible as possible; however,
-circuit layout constraints prevented us from achieving perfect
-compatibility.
-
-The "safest" pins to use for PWM output are pins 9 and 11. These pins
-work on any Arduino board and on Maple. The "safe" pins, which work
-on most recent Arduino boards, the Arduino Mega and the Maple, are
-pins 3, 5, 6, 9, and 11. Thus, if you want your project to be as
-portable as possible between Maple and Arduino, we recommend using the
-"safest" pins first, then the "safe" pins, as necessary.
-
-Difference 4: PWM frequency
-^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-The frequency of the PWM signal (i.e., the frequency of a complete
-on/off cycle) on the Arduino is approximately 490 Hz.
-
-On the Maple, the frequency is configurable, defaulting to about 1100
-Hz, or 1.1 KHz. This is because the PWM frequency is the frequency of
-the timer which controls PWM output on the particular pin (\
-:ref:`the PWM tutorial has the details <pwm>`\ ).
-
-If your application absolutely requires Arduino's PWM frequency (it
-probably doesn't), then the steps are:
-
-1. Figure out which timer controls PWM output on your pin (\ :ref:`this table <pwm-timer-table>` is your friend here). Let's say it's ``Timern``\ , where ``n`` is some number 1, 2, 3, or 4.
-
-2. Call ``Timern.setPeriod(2041)``\ . This will set the timer's period to approximately 2041 microseconds, which is a frequency of approximately 490 Hz.
-
-Be aware that this will change the period for the **entire timer**\ ,
-and will affect anything else in your program that depends on that
-timer. One example is :ref:`interrupts <timers-attachinterrupt>`\ .
-You've been :ref:`warned <timers-pwm-conflicts>`\ .
-
-See also
---------
-
-- :ref:`Maple PWM tutorial <pwm>`
-
-.. rubric:: Footnotes
-
-.. [#fbytemax] This is because the value for the duty cycle on Arduino
- must fit in 1 byte of memory, and an unsigned (i.e., nonnegative)
- integer with size 1 byte can hold the values between 0 and 255.
-
-.. [#fuint16max] This is because the value for the duty cycle on the
- Maple uses 2 bytes of memory, and an unsigned (i.e., nonnegative)
- integer with size 2 bytes can hold the values between 0 and 65,535.
-
-
-.. include:: cc-attribution.txt \ No newline at end of file