diff options
Diffstat (limited to 'core')
| -rw-r--r-- | core/usb/README | 66 | ||||
| -rw-r--r-- | core/usb/usb.c | 85 | ||||
| -rw-r--r-- | core/usb/usb.h | 26 | ||||
| -rw-r--r-- | core/usb/usb_lib/usb_conf.h | 86 | ||||
| -rw-r--r-- | core/usb/usb_lib/usb_core.c | 1016 | ||||
| -rw-r--r-- | core/usb/usb_lib/usb_core.h | 244 | ||||
| -rw-r--r-- | core/usb/usb_lib/usb_def.h | 80 | ||||
| -rw-r--r-- | core/usb/usb_lib/usb_init.c | 64 | ||||
| -rw-r--r-- | core/usb/usb_lib/usb_init.h | 49 | ||||
| -rw-r--r-- | core/usb/usb_lib/usb_int.c | 192 | ||||
| -rw-r--r-- | core/usb/usb_lib/usb_int.h | 33 | ||||
| -rw-r--r-- | core/usb/usb_lib/usb_lib.h | 37 | ||||
| -rw-r--r-- | core/usb/usb_lib/usb_mem.c | 73 | ||||
| -rw-r--r-- | core/usb/usb_lib/usb_mem.h | 32 | ||||
| -rw-r--r-- | core/usb/usb_lib/usb_regs.c | 748 | ||||
| -rw-r--r-- | core/usb/usb_lib/usb_regs.h | 619 | ||||
| -rw-r--r-- | core/usb/usb_lib/usb_type.h | 72 |
17 files changed, 3522 insertions, 0 deletions
diff --git a/core/usb/README b/core/usb/README new file mode 100644 index 0000000..ef4964c --- /dev/null +++ b/core/usb/README @@ -0,0 +1,66 @@ +The USB submodule of libmaple is responsible for: + initilizing the usb peripheral, scaling the peripheral clocks appropriately, + enabling the interrupt channels to usb, defining the usb isr, resetting the usb + disc pin (used to tell the host were alive). Additionally, the usb submodule defines + the virtual com port usb applications that is available to all user sketches via Usb.print() + and others. + +To use it: + Call Usb.init() to enable the IRQ channel, configure the clocks, + pull down usb_disc, and setup the vcom buffers + Usb.print/ln, available(), read(), write() implement the same + interface as Serial1/2/3 + + +Current Status: + Currently, the USB submodule relies on the low level core library provided by ST to access the + usb peripheral registers and implement the usb transfer protocol for control endpoint transfers. + The high level virtual com port application is unfortunately hard to untangle from this low level + dependence, and when a new USB core library is written (to nix ST dependence) changes will likely + have to be made to virtual com application code. Ideally, the new core library should mimick the + form of MyUSB (LUFA), since this library (USB for AVR) is growing in popularity and in example + applications. + + The virtual com port serves two important purposes. 1) is allows serial data transfers between + user sketches an a host computer. 2) is allows the host machine to issue a system reset by + asserting the DTR signal. After reset, Maple will run the DFU bootloader for a few seconds, + during which the user can begin a DFU download operation ('downloads' application binary into + RAM/FLASH). This without this virtual com port, it would be necessary to find an alternative means + to reset the chip in order to enable the bootloader. + + If you would like to develop your own USB application for whatever reason (uses faster isochronous + enpoints for streaming audio, or implements the USB HID or Mass Storage specs for examples) then + ensure that you leave some hook for resetting Maple remotely in order to spin up the DFU bootloader. + Please make sure to give yourself a unique vendor/product ID pair in your application, as some + operating systems will assign a host-side driver based on these tags. + + It would be possible to build a compound usb device, that implements endpoints for both the virtual + COM port as well as some other components (mass sotrage etc.) however this turns out to be a burden + from the host driver side, as windows and *nix handle compound usb devices quite differently. + + Be mindful that running the usb application isnt "free." The device must respond to periodic bus + activity (every few milliseconds) by servicing an ISR. Therefore the usb application should be disabled + inside of timing critical applications. In order to disconnect the device from the host, the USB_DISC + pin can be asserted (on Maple v1,2,3 this is GPIOC,12). Alternatively, the NVIC can be directly configured + to disable the USB LP/HP IRQ's + + This library should exposed through usb.h, do not include any other files direcly in your application. + + The files inside of usb_lib were provided by ST and are subject to their own license, all other files were + written by the LeafLabs team and fall under the MIT license. + +Integration with libmaple: + The current usb lib is ported directly from the maple bootloader code, adapted to be a virtual com rather than + a DFU device. That means several functions are redefined locally that could have been pulled from elsewhere + in libmaple. Thus, ths usb module depends absolutely zero on libmaple, it even ensures that clocks are configured + correctly for its operation. + +Todo: + - write custom low level usb stack to strip out any remaining dependence on ST code + - remove dependence on hardware.c, since any functions here really should have their + own analogues elsewhere inside libmaple + - add a high level usb application library that would allow users to make their own + HID/Mass Storage/Audio/Video devices. + - implement a Usb.link(SerialX) that forces a passthrough + the host computer virtual com to SerialX, and utilizes the + line_config commands correctly (sets baud etc)
\ No newline at end of file diff --git a/core/usb/usb.c b/core/usb/usb.c new file mode 100644 index 0000000..8826858 --- /dev/null +++ b/core/usb/usb.c @@ -0,0 +1,85 @@ +#include "libmaple.h" +#include "usb.h" +#include "usb_regs.h" +#include "bootVect.h" + +void usb_lpIRQHandler(void) +{ + typedef void (*funcPtr)(void); + + const uint32_t usbIsrAddr = *(uint32_t*)(USB_ISR_ADDR); + void (*ptrToUsbISR)(void) = (funcPtr) usbIsrAddr; + ptrToUsbISR(); +} + +void usb_userToPMABufferCopy(uint8 *pbUsrBuf, uint16 wPMABufAddr, uint16 wNBytes) +{ + uint32 n = (wNBytes + 1) >> 1; /* n = (wNBytes + 1) / 2 */ + uint32 i, temp1, temp2; + uint16 *pdwVal; + pdwVal = (uint16 *)(wPMABufAddr * 2 + PMAAddr); + for (i = n; i != 0; i--) + { + temp1 = (uint16) * pbUsrBuf; + pbUsrBuf++; + temp2 = temp1 | (uint16) * pbUsrBuf << 8; + *pdwVal++ = temp2; + pdwVal++; + pbUsrBuf++; + } +} + +void usb_PMAToUserBufferCopy(uint8 *pbUsrBuf, uint16 wPMABufAddr, uint16 wNBytes) +{ + uint32 n = (wNBytes + 1) >> 1;/* /2*/ + uint32 i; + uint32 *pdwVal; + pdwVal = (uint32 *)(wPMABufAddr * 2 + PMAAddr); + for (i = n; i != 0; i--) + { + *(uint16*)pbUsrBuf++ = *pdwVal++; + pbUsrBuf++; + } +} + +void usb_serialWriteStr(const char* outStr) { + uint8 offset=0; + BootVectTable *bootVector = ((BootVectTable*)BOOTLOADER_VECT_TABLE); + + while ((outStr[offset] != '\0') + && (offset < USB_SERIAL_BUF_SIZE)) { + offset++; + } + + delay(offset*1); + + bootVector->serial_count_in = (uint32*) &offset; + usb_userToPMABufferCopy((uint8*)outStr,USB_SERIAL_ENDP_TXADDR,offset); + _SetEPTxCount(USB_SERIAL_ENDP_TX,offset); + _SetEPTxValid(USB_SERIAL_ENDP_TX); + +} + +void usb_serialWriteChar(unsigned char ch) { + BootVectTable *bootVector = ((BootVectTable*)BOOTLOADER_VECT_TABLE); + + delay(1); + + *(bootVector->serial_count_in) = 1; + usb_userToPMABufferCopy((uint8*)(&ch),USB_SERIAL_ENDP_TXADDR,1); + _SetEPTxCount(USB_SERIAL_ENDP_TX,1); + _SetEPTxValid(USB_SERIAL_ENDP_TX); + +} + +uint8 usb_serialGetRecvLen() { + uint8 count_out =_GetEPRxCount(USB_SERIAL_ENDP_RX); + return count_out; +} + +void usb_copyRecvBuffer(unsigned char* dest, uint8 len) { + ASSERT(len < USB_SERIAL_BUF_SIZE); + usb_PMAToUserBufferCopy((uint8*)(dest),USB_SERIAL_ENDP_RXADDR,len); + _SetEPRxValid(USB_SERIAL_ENDP_RX); +} + diff --git a/core/usb/usb.h b/core/usb/usb.h new file mode 100644 index 0000000..fa40123 --- /dev/null +++ b/core/usb/usb.h @@ -0,0 +1,26 @@ +#ifndef _USB_H_ +#define _USB_H_ + +#define USB_ISR_ADDR (0x08000090) +#define USB_SERIAL_ENDP_TXADDR ((uint32) 0xC0) +#define USB_SERIAL_ENDP_RXADDR ((uint32) 0x110) +#define USB_SERIAL_ENDP_TX ((uint16) 0x1) +#define USB_SERIAL_ENDP_RX ((uint16) 0x3) +#define USB_SERIAL_BUF_SIZE (0x40) + +#ifdef __cplusplus +extern "C" { +#endif + +void usb_lpIRQHandler(void); +void usb_userToPMABufferCopy(uint8 *pbUsrBuf,uint16 wPMABufAddr,uint16 wNBytes); +void usb_PMAToUserBufferCopy(uint8 *pbUsrBuf,uint16 wPMABufAddr,uint16 wNBytes); +void usb_serialWriteStr(const char *outStr); +void usb_serialWriteChar(unsigned char ch); +uint8_t usb_serialGetRecvLen(); +void usb_copyRecvBuffer(unsigned char* dest, uint8 len); + +#ifdef __cplusplus +} // extern "C" +#endif +#endif //_USB_H diff --git a/core/usb/usb_lib/usb_conf.h b/core/usb/usb_lib/usb_conf.h new file mode 100644 index 0000000..e9b7f14 --- /dev/null +++ b/core/usb/usb_lib/usb_conf.h @@ -0,0 +1,86 @@ +/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name : usb_conf.h
+* Author : MCD Application Team
+* Version : V2.2.1
+* Date : 09/22/2008
+* Description : Device Firmware Upgrade (DFU) configuration file
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_CONF_H
+#define __USB_CONF_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+/* External variables --------------------------------------------------------*/
+/*-------------------------------------------------------------*/
+/* EP_NUM */
+/* defines how many endpoints are used by the device */
+/*-------------------------------------------------------------*/
+#define EP_NUM (1)
+
+/*-------------------------------------------------------------*/
+/* -------------- Buffer Description Table -----------------*/
+/*-------------------------------------------------------------*/
+/* buffer table base address */
+/* buffer table base address */
+#define BTABLE_ADDRESS (0x00)
+
+/* EP0 */
+/* rx/tx buffer base address */
+#define ENDP0_RXADDR (0x10)
+#define ENDP0_TXADDR (0x50)
+
+
+/*-------------------------------------------------------------*/
+/* ------------------- ISTR events -------------------------*/
+/*-------------------------------------------------------------*/
+/* IMR_MSK */
+/* mask defining which events has to be handled */
+/* by the device application software */
+#define IMR_MSK (CNTR_CTRM | \
+ CNTR_WKUPM | \
+ CNTR_SUSPM | \
+ CNTR_ERRM | \
+ CNTR_SOFM | \
+ CNTR_ESOFM | \
+ CNTR_RESETM \
+ )
+
+/* CTR service routines */
+/* associated to defined endpoints */
+#define EP1_IN_Callback NOP_Process
+#define EP2_IN_Callback NOP_Process
+#define EP3_IN_Callback NOP_Process
+#define EP4_IN_Callback NOP_Process
+#define EP5_IN_Callback NOP_Process
+#define EP6_IN_Callback NOP_Process
+#define EP7_IN_Callback NOP_Process
+
+
+#define EP1_OUT_Callback NOP_Process
+#define EP2_OUT_Callback NOP_Process
+#define EP3_OUT_Callback NOP_Process
+#define EP4_OUT_Callback NOP_Process
+#define EP5_OUT_Callback NOP_Process
+#define EP6_OUT_Callback NOP_Process
+#define EP7_OUT_Callback NOP_Process
+
+
+#endif /*__USB_CONF_H*/
+
+/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
+
+
+
+
diff --git a/core/usb/usb_lib/usb_core.c b/core/usb/usb_lib/usb_core.c new file mode 100644 index 0000000..f637165 --- /dev/null +++ b/core/usb/usb_lib/usb_core.c @@ -0,0 +1,1016 @@ +/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name : usb_core.c
+* Author : MCD Application Team
+* Version : V2.2.1
+* Date : 09/22/2008
+* Description : Standard protocol processing (USB v2.0)
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Includes ------------------------------------------------------------------*/
+#include "usb_lib.h"
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define ValBit(VAR,Place) (VAR & (1 << Place))
+#define SetBit(VAR,Place) (VAR |= (1 << Place))
+#define ClrBit(VAR,Place) (VAR &= ((1 << Place) ^ 255))
+
+#define Send0LengthData() { _SetEPTxCount(ENDP0, 0); \
+ vSetEPTxStatus(EP_TX_VALID); \
+ }
+
+#define vSetEPRxStatus(st) (SaveRState = st)
+#define vSetEPTxStatus(st) (SaveTState = st)
+
+#define USB_StatusIn() Send0LengthData()
+#define USB_StatusOut() vSetEPRxStatus(EP_RX_VALID)
+
+#define StatusInfo0 StatusInfo.bw.bb1 /* Reverse bb0 & bb1 */
+#define StatusInfo1 StatusInfo.bw.bb0
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+u16_u8 StatusInfo;
+bool Data_Mul_MaxPacketSize = FALSE;
+/* Private function prototypes -----------------------------------------------*/
+static void DataStageOut(void);
+static void DataStageIn(void);
+static void NoData_Setup0(void);
+static void Data_Setup0(void);
+/* Private functions ---------------------------------------------------------*/
+
+/*******************************************************************************
+* Function Name : Standard_GetConfiguration.
+* Description : Return the current configuration variable address.
+* Input : Length - How many bytes are needed.
+* Output : None.
+* Return : Return 1 , if the request is invalid when "Length" is 0.
+* Return "Buffer" if the "Length" is not 0.
+*******************************************************************************/
+u8 *Standard_GetConfiguration(u16 Length)
+{
+ if (Length == 0)
+ {
+ pInformation->Ctrl_Info.Usb_wLength =
+ sizeof(pInformation->Current_Configuration);
+ return 0;
+ }
+ pUser_Standard_Requests->User_GetConfiguration();
+ return (u8 *)&pInformation->Current_Configuration;
+}
+
+/*******************************************************************************
+* Function Name : Standard_SetConfiguration.
+* Description : This routine is called to set the configuration value
+* Then each class should configure device themself.
+* Input : None.
+* Output : None.
+* Return : Return USB_SUCCESS, if the request is performed.
+* Return USB_UNSUPPORT, if the request is invalid.
+*******************************************************************************/
+RESULT Standard_SetConfiguration(void)
+{
+
+ if ((pInformation->USBwValue0 <=
+ Device_Table.Total_Configuration) && (pInformation->USBwValue1 == 0)
+ && (pInformation->USBwIndex == 0)) /*call Back usb spec 2.0*/
+ {
+ pInformation->Current_Configuration = pInformation->USBwValue0;
+ pUser_Standard_Requests->User_SetConfiguration();
+ return USB_SUCCESS;
+ }
+ else
+ {
+ return USB_UNSUPPORT;
+ }
+}
+
+/*******************************************************************************
+* Function Name : Standard_GetInterface.
+* Description : Return the Alternate Setting of the current interface.
+* Input : Length - How many bytes are needed.
+* Output : None.
+* Return : Return 0, if the request is invalid when "Length" is 0.
+* Return "Buffer" if the "Length" is not 0.
+*******************************************************************************/
+u8 *Standard_GetInterface(u16 Length)
+{
+ if (Length == 0)
+ {
+ pInformation->Ctrl_Info.Usb_wLength =
+ sizeof(pInformation->Current_AlternateSetting);
+ return 0;
+ }
+ pUser_Standard_Requests->User_GetInterface();
+ return (u8 *)&pInformation->Current_AlternateSetting;
+}
+
+/*******************************************************************************
+* Function Name : Standard_SetInterface.
+* Description : This routine is called to set the interface.
+* Then each class should configure the interface them self.
+* Input : None.
+* Output : None.
+* Return : - Return USB_SUCCESS, if the request is performed.
+* - Return USB_UNSUPPORT, if the request is invalid.
+*******************************************************************************/
+RESULT Standard_SetInterface(void)
+{
+ RESULT Re;
+ /*Test if the specified Interface and Alternate Setting are supported by
+ the application Firmware*/
+ Re = (*pProperty->Class_Get_Interface_Setting)(pInformation->USBwIndex0, pInformation->USBwValue0);
+
+ if (pInformation->Current_Configuration != 0)
+ {
+ if ((Re != USB_SUCCESS) || (pInformation->USBwIndex1 != 0)
+ || (pInformation->USBwValue1 != 0))
+ {
+ return USB_UNSUPPORT;
+ }
+ else if (Re == USB_SUCCESS)
+ {
+ pUser_Standard_Requests->User_SetInterface();
+ pInformation->Current_Interface = pInformation->USBwIndex0;
+ pInformation->Current_AlternateSetting = pInformation->USBwValue0;
+ return USB_SUCCESS;
+ }
+
+ }
+
+ return USB_UNSUPPORT;
+}
+
+/*******************************************************************************
+* Function Name : Standard_GetStatus.
+* Description : Copy the device request data to "StatusInfo buffer".
+* Input : - Length - How many bytes are needed.
+* Output : None.
+* Return : Return 0, if the request is at end of data block,
+* or is invalid when "Length" is 0.
+*******************************************************************************/
+u8 *Standard_GetStatus(u16 Length)
+{
+ if (Length == 0)
+ {
+ pInformation->Ctrl_Info.Usb_wLength = 2;
+ return 0;
+ }
+
+ StatusInfo.w = 0;
+ /* Reset Status Information */
+
+ if (Type_Recipient == (STANDARD_REQUEST | DEVICE_RECIPIENT))
+ {
+ /*Get Device Status */
+ u8 Feature = pInformation->Current_Feature;
+
+ /* Remote Wakeup enabled */
+ if (ValBit(Feature, 5))
+ {
+ SetBit(StatusInfo0, 1);
+ }
+
+ /* Bus-powered */
+ if (ValBit(Feature, 6))
+ {
+ ClrBit(StatusInfo0, 0);
+ }
+ else /* Self-powered */
+ {
+ SetBit(StatusInfo0, 0);
+ }
+ }
+ /*Interface Status*/
+ else if (Type_Recipient == (STANDARD_REQUEST | INTERFACE_RECIPIENT))
+ {
+ return (u8 *)&StatusInfo;
+ }
+ /*Get EndPoint Status*/
+ else if (Type_Recipient == (STANDARD_REQUEST | ENDPOINT_RECIPIENT))
+ {
+ u8 Related_Endpoint;
+ u8 wIndex0 = pInformation->USBwIndex0;
+
+ Related_Endpoint = (wIndex0 & 0x0f);
+ if (ValBit(wIndex0, 7))
+ {
+ /* IN endpoint */
+ if (_GetTxStallStatus(Related_Endpoint))
+ {
+ SetBit(StatusInfo0, 0); /* IN Endpoint stalled */
+ }
+ }
+ else
+ {
+ /* OUT endpoint */
+ if (_GetRxStallStatus(Related_Endpoint))
+ {
+ SetBit(StatusInfo0, 0); /* OUT Endpoint stalled */
+ }
+ }
+
+ }
+ else
+ {
+ return NULL;
+ }
+ pUser_Standard_Requests->User_GetStatus();
+ return (u8 *)&StatusInfo;
+}
+
+/*******************************************************************************
+* Function Name : Standard_ClearFeature.
+* Description : Clear or disable a specific feature.
+* Input : None.
+* Output : None.
+* Return : - Return USB_SUCCESS, if the request is performed.
+* - Return USB_UNSUPPORT, if the request is invalid.
+*******************************************************************************/
+RESULT Standard_ClearFeature(void)
+{
+ u32 Type_Rec = Type_Recipient;
+ u32 Status;
+
+
+ if (Type_Rec == (STANDARD_REQUEST | DEVICE_RECIPIENT))
+ {/*Device Clear Feature*/
+ ClrBit(pInformation->Current_Feature, 5);
+ return USB_SUCCESS;
+ }
+ else if (Type_Rec == (STANDARD_REQUEST | ENDPOINT_RECIPIENT))
+ {/*EndPoint Clear Feature*/
+ DEVICE* pDev;
+ u32 Related_Endpoint;
+ u32 wIndex0;
+ u32 rEP;
+
+ if ((pInformation->USBwValue != ENDPOINT_STALL)
+ || (pInformation->USBwIndex1 != 0))
+ {
+ return USB_UNSUPPORT;
+ }
+
+ pDev = &Device_Table;
+ wIndex0 = pInformation->USBwIndex0;
+ rEP = wIndex0 & ~0x80;
+ Related_Endpoint = ENDP0 + rEP;
+
+ if (ValBit(pInformation->USBwIndex0, 7))
+ {
+ /*Get Status of endpoint & stall the request if the related_ENdpoint
+ is Disabled*/
+ Status = _GetEPTxStatus(Related_Endpoint);
+ }
+ else
+ {
+ Status = _GetEPRxStatus(Related_Endpoint);
+ }
+
+ if ((rEP >= pDev->Total_Endpoint) || (Status == 0)
+ || (pInformation->Current_Configuration == 0))
+ {
+ return USB_UNSUPPORT;
+ }
+
+
+ if (wIndex0 & 0x80)
+ {
+ /* IN endpoint */
+ if (_GetTxStallStatus(Related_Endpoint ))
+ {
+ ClearDTOG_TX(Related_Endpoint);
+ SetEPTxStatus(Related_Endpoint, EP_TX_VALID);
+ }
+ }
+ else
+ {
+ /* OUT endpoint */
+ if (_GetRxStallStatus(Related_Endpoint))
+ {
+ if (Related_Endpoint == ENDP0)
+ {
+ /* After clear the STALL, enable the default endpoint receiver */
+ SetEPRxCount(Related_Endpoint, Device_Property.MaxPacketSize);
+ _SetEPRxStatus(Related_Endpoint, EP_RX_VALID);
+ }
+ else
+ {
+ ClearDTOG_RX(Related_Endpoint);
+ _SetEPRxStatus(Related_Endpoint, EP_RX_VALID);
+ }
+ }
+ }
+ pUser_Standard_Requests->User_ClearFeature();
+ return USB_SUCCESS;
+ }
+
+ return USB_UNSUPPORT;
+}
+
+/*******************************************************************************
+* Function Name : Standard_SetEndPointFeature
+* Description : Set or enable a specific feature of EndPoint
+* Input : None.
+* Output : None.
+* Return : - Return USB_SUCCESS, if the request is performed.
+* - Return USB_UNSUPPORT, if the request is invalid.
+*******************************************************************************/
+RESULT Standard_SetEndPointFeature(void)
+{
+ u32 wIndex0;
+ u32 Related_Endpoint;
+ u32 rEP;
+ u32 Status;
+
+ wIndex0 = pInformation->USBwIndex0;
+ rEP = wIndex0 & ~0x80;
+ Related_Endpoint = ENDP0 + rEP;
+
+ if (ValBit(pInformation->USBwIndex0, 7))
+ {
+ /* get Status of endpoint & stall the request if the related_ENdpoint
+ is Disabled*/
+ Status = _GetEPTxStatus(Related_Endpoint);
+ }
+ else
+ {
+ Status = _GetEPRxStatus(Related_Endpoint);
+ }
+
+ if (Related_Endpoint >= Device_Table.Total_Endpoint
+ || pInformation->USBwValue != 0 || Status == 0
+ || pInformation->Current_Configuration == 0)
+ {
+ return USB_UNSUPPORT;
+ }
+ else
+ {
+ if (wIndex0 & 0x80)
+ {
+ /* IN endpoint */
+ _SetEPTxStatus(Related_Endpoint, EP_TX_STALL);
+ }
+
+ else
+ {
+ /* OUT endpoint */
+ _SetEPRxStatus(Related_Endpoint, EP_RX_STALL);
+ }
+ }
+ pUser_Standard_Requests->User_SetEndPointFeature();
+ return USB_SUCCESS;
+}
+
+/*******************************************************************************
+* Function Name : Standard_SetDeviceFeature.
+* Description : Set or enable a specific feature of Device.
+* Input : None.
+* Output : None.
+* Return : - Return USB_SUCCESS, if the request is performed.
+* - Return USB_UNSUPPORT, if the request is invalid.
+*******************************************************************************/
+RESULT Standard_SetDeviceFeature(void)
+{
+ SetBit(pInformation->Current_Feature, 5);
+ pUser_Standard_Requests->User_SetDeviceFeature();
+ return USB_SUCCESS;
+}
+
+/*******************************************************************************
+* Function Name : Standard_GetDescriptorData.
+* Description : Standard_GetDescriptorData is used for descriptors transfer.
+* : This routine is used for the descriptors resident in Flash
+* or RAM
+* pDesc can be in either Flash or RAM
+* The purpose of this routine is to have a versatile way to
+* response descriptors request. It allows user to generate
+* certain descriptors with software or read descriptors from
+* external storage part by part.
+* Input : - Length - Length of the data in this transfer.
+* - pDesc - A pointer points to descriptor struct.
+* The structure gives the initial address of the descriptor and
+* its original size.
+* Output : None.
+* Return : Address of a part of the descriptor pointed by the Usb_
+* wOffset The buffer pointed by this address contains at least
+* Length bytes.
+*******************************************************************************/
+u8 *Standard_GetDescriptorData(u16 Length, ONE_DESCRIPTOR *pDesc)
+{
+ u32 wOffset;
+
+ wOffset = pInformation->Ctrl_Info.Usb_wOffset;
+ if (Length == 0)
+ {
+ pInformation->Ctrl_Info.Usb_wLength = pDesc->Descriptor_Size - wOffset;
+ return 0;
+ }
+
+ return pDesc->Descriptor + wOffset;
+}
+
+/*******************************************************************************
+* Function Name : DataStageOut.
+* Description : Data stage of a Control Write Transfer.
+* Input : None.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void DataStageOut(void)
+{
+ ENDPOINT_INFO *pEPinfo = &pInformation->Ctrl_Info;
+ u32 save_rLength;
+
+ save_rLength = pEPinfo->Usb_rLength;
+
+ if (pEPinfo->CopyData && save_rLength)
+ {
+ u8 *Buffer;
+ u32 Length;
+
+ Length = pEPinfo->PacketSize;
+ if (Length > save_rLength)
+ {
+ Length = save_rLength;
+ }
+
+ Buffer = (*pEPinfo->CopyData)(Length);
+ pEPinfo->Usb_rLength -= Length;
+ pEPinfo->Usb_rOffset += Length;
+
+ PMAToUserBufferCopy(Buffer, GetEPRxAddr(ENDP0), Length);
+ }
+
+ if (pEPinfo->Usb_rLength != 0)
+ {
+ vSetEPRxStatus(EP_RX_VALID);/* re-enable for next data reception */
+ SetEPTxCount(ENDP0, 0);
+ vSetEPTxStatus(EP_TX_VALID);/* Expect the host to abort the data OUT stage */
+ }
+ /* Set the next State*/
+ if (pEPinfo->Usb_rLength >= pEPinfo->PacketSize)
+ {
+ pInformation->ControlState = OUT_DATA;
+ }
+ else
+ {
+ if (pEPinfo->Usb_rLength > 0)
+ {
+ pInformation->ControlState = LAST_OUT_DATA;
+ }
+ else if (pEPinfo->Usb_rLength == 0)
+ {
+ pInformation->ControlState = WAIT_STATUS_IN;
+ USB_StatusIn();
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name : DataStageIn.
+* Description : Data stage of a Control Read Transfer.
+* Input : None.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void DataStageIn(void)
+{
+ ENDPOINT_INFO *pEPinfo = &pInformation->Ctrl_Info;
+ u32 save_wLength = pEPinfo->Usb_wLength;
+ u32 ControlState = pInformation->ControlState;
+
+ u8 *DataBuffer;
+ u32 Length;
+
+ if ((save_wLength == 0) && (ControlState == LAST_IN_DATA))
+ {
+ if(Data_Mul_MaxPacketSize == TRUE)
+ {
+ /* No more data to send and empty packet */
+ Send0LengthData();
+ ControlState = LAST_IN_DATA;
+ Data_Mul_MaxPacketSize = FALSE;
+ }
+ else
+ {
+ /* No more data to send so STALL the TX Status*/
+ ControlState = WAIT_STATUS_OUT;
+ vSetEPTxStatus(EP_TX_STALL);
+ }
+
+ goto Expect_Status_Out;
+ }
+
+ Length = pEPinfo->PacketSize;
+ ControlState = (save_wLength <= Length) ? LAST_IN_DATA : IN_DATA;
+
+ if (Length > save_wLength)
+ {
+ Length = save_wLength;
+ }
+
+ DataBuffer = (*pEPinfo->CopyData)(Length);
+
+ UserToPMABufferCopy(DataBuffer, GetEPTxAddr(ENDP0), Length);
+
+ SetEPTxCount(ENDP0, Length);
+
+ pEPinfo->Usb_wLength -= Length;
+ pEPinfo->Usb_wOffset += Length;
+ vSetEPTxStatus(EP_TX_VALID);
+
+ USB_StatusOut();/* Expect the host to abort the data IN stage */
+
+Expect_Status_Out:
+ pInformation->ControlState = ControlState;
+}
+
+/*******************************************************************************
+* Function Name : NoData_Setup0.
+* Description : Proceed the processing of setup request without data stage.
+* Input : None.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void NoData_Setup0(void)
+{
+ RESULT Result = USB_UNSUPPORT;
+ u32 RequestNo = pInformation->USBbRequest;
+ u32 ControlState;
+
+ if (Type_Recipient == (STANDARD_REQUEST | DEVICE_RECIPIENT))
+ {
+ /* Device Request*/
+ /* SET_CONFIGURATION*/
+ if (RequestNo == SET_CONFIGURATION)
+ {
+ Result = Standard_SetConfiguration();
+ }
+
+ /*SET ADDRESS*/
+ else if (RequestNo == SET_ADDRESS)
+ {
+ if ((pInformation->USBwValue0 > 127) || (pInformation->USBwValue1 != 0)
+ || (pInformation->USBwIndex != 0)
+ || (pInformation->Current_Configuration != 0))
+ /* Device Address should be 127 or less*/
+ {
+ ControlState = STALLED;
+ goto exit_NoData_Setup0;
+ }
+ else
+ {
+ Result = USB_SUCCESS;
+ }
+ }
+ /*SET FEATURE for Device*/
+ else if (RequestNo == SET_FEATURE)
+ {
+ if ((pInformation->USBwValue0 == DEVICE_REMOTE_WAKEUP)
+ && (pInformation->USBwIndex == 0)
+ && (ValBit(pInformation->Current_Feature, 5)))
+ {
+ Result = Standard_SetDeviceFeature();
+ }
+ else
+ {
+ Result = USB_UNSUPPORT;
+ }
+ }
+ /*Clear FEATURE for Device */
+ else if (RequestNo == CLEAR_FEATURE)
+ {
+ if (pInformation->USBwValue0 == DEVICE_REMOTE_WAKEUP
+ && pInformation->USBwIndex == 0
+ && ValBit(pInformation->Current_Feature, 5))
+ {
+ Result = Standard_ClearFeature();
+ }
+ else
+ {
+ Result = USB_UNSUPPORT;
+ }
+ }
+
+ }
+
+ /* Interface Request*/
+ else if (Type_Recipient == (STANDARD_REQUEST | INTERFACE_RECIPIENT))
+ {
+ /*SET INTERFACE*/
+ if (RequestNo == SET_INTERFACE)
+ {
+ Result = Standard_SetInterface();
+ }
+ }
+
+ /* EndPoint Request*/
+ else if (Type_Recipient == (STANDARD_REQUEST | ENDPOINT_RECIPIENT))
+ {
+ /*CLEAR FEATURE for EndPoint*/
+ if (RequestNo == CLEAR_FEATURE)
+ {
+ Result = Standard_ClearFeature();
+ }
+ /* SET FEATURE for EndPoint*/
+ else if (RequestNo == SET_FEATURE)
+ {
+ Result = Standard_SetEndPointFeature();
+ }
+ }
+ else
+ {
+ Result = USB_UNSUPPORT;
+ }
+
+
+ if (Result != USB_SUCCESS)
+ {
+ Result = (*pProperty->Class_NoData_Setup)(RequestNo);
+ if (Result == USB_NOT_READY)
+ {
+ ControlState = PAUSE;
+ goto exit_NoData_Setup0;
+ }
+ }
+
+ if (Result != USB_SUCCESS)
+ {
+ ControlState = STALLED;
+ goto exit_NoData_Setup0;
+ }
+
+ ControlState = WAIT_STATUS_IN;/* After no data stage SETUP */
+
+ USB_StatusIn();
+
+exit_NoData_Setup0:
+ pInformation->ControlState = ControlState;
+ return;
+}
+
+/*******************************************************************************
+* Function Name : Data_Setup0.
+* Description : Proceed the processing of setup request with data stage.
+* Input : None.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void Data_Setup0(void)
+{
+ u8 *(*CopyRoutine)(u16);
+ RESULT Result;
+ u32 Request_No = pInformation->USBbRequest;
+
+ u32 Related_Endpoint, Reserved;
+ u32 wOffset, Status;
+
+
+
+ CopyRoutine = NULL;
+ wOffset = 0;
+
+ if (Request_No == GET_DESCRIPTOR)
+ {
+ if (Type_Recipient == (STANDARD_REQUEST | DEVICE_RECIPIENT))
+ {
+ u8 wValue1 = pInformation->USBwValue1;
+ if (wValue1 == DEVICE_DESCRIPTOR)
+ {
+ CopyRoutine = pProperty->GetDeviceDescriptor;
+ }
+ else if (wValue1 == CONFIG_DESCRIPTOR)
+ {
+ CopyRoutine = pProperty->GetConfigDescriptor;
+ }
+ else if (wValue1 == STRING_DESCRIPTOR)
+ {
+ CopyRoutine = pProperty->GetStringDescriptor;
+ } else if (wValue1 == 0x21) /* added to support functional descriptors */
+ {
+ CopyRoutine = pProperty->GetFunctionalDescriptor;
+ } /* End of GET_DESCRIPTOR */
+ }
+ }
+
+ /*GET STATUS*/
+ else if ((Request_No == GET_STATUS) && (pInformation->USBwValue == 0)
+ && (pInformation->USBwLength == 0x0002)
+ && (pInformation->USBwIndex1 == 0))
+ {
+ /* GET STATUS for Device*/
+ if ((Type_Recipient == (STANDARD_REQUEST | DEVICE_RECIPIENT))
+ && (pInformation->USBwIndex == 0))
+ {
+ CopyRoutine = Standard_GetStatus;
+ }
+
+ /* GET STATUS for Interface*/
+ else if (Type_Recipient == (STANDARD_REQUEST | INTERFACE_RECIPIENT))
+ {
+ if (((*pProperty->Class_Get_Interface_Setting)(pInformation->USBwIndex0, 0) == USB_SUCCESS)
+ && (pInformation->Current_Configuration != 0))
+ {
+ CopyRoutine = Standard_GetStatus;
+ }
+ }
+
+ /* GET STATUS for EndPoint*/
+ else if (Type_Recipient == (STANDARD_REQUEST | ENDPOINT_RECIPIENT))
+ {
+ Related_Endpoint = (pInformation->USBwIndex0 & 0x0f);
+ Reserved = pInformation->USBwIndex0 & 0x70;
+
+ if (ValBit(pInformation->USBwIndex0, 7))
+ {
+ /*Get Status of endpoint & stall the request if the related_ENdpoint
+ is Disabled*/
+ Status = _GetEPTxStatus(Related_Endpoint);
+ }
+ else
+ {
+ Status = _GetEPRxStatus(Related_Endpoint);
+ }
+
+ if ((Related_Endpoint < Device_Table.Total_Endpoint) && (Reserved == 0)
+ && (Status != 0))
+ {
+ CopyRoutine = Standard_GetStatus;
+ }
+ }
+
+ }
+
+ /*GET CONFIGURATION*/
+ else if (Request_No == GET_CONFIGURATION)
+ {
+ if (Type_Recipient == (STANDARD_REQUEST | DEVICE_RECIPIENT))
+ {
+ CopyRoutine = Standard_GetConfiguration;
+ }
+ }
+ /*GET INTERFACE*/
+ else if (Request_No == GET_INTERFACE)
+ {
+ if ((Type_Recipient == (STANDARD_REQUEST | INTERFACE_RECIPIENT))
+ && (pInformation->Current_Configuration != 0) && (pInformation->USBwValue == 0)
+ && (pInformation->USBwIndex1 == 0) && (pInformation->USBwLength == 0x0001)
+ && ((*pProperty->Class_Get_Interface_Setting)(pInformation->USBwIndex0, 0) == USB_SUCCESS))
+ {
+ CopyRoutine = Standard_GetInterface;
+ }
+
+ }
+
+ if (CopyRoutine)
+ {
+ pInformation->Ctrl_Info.Usb_wOffset = wOffset;
+ pInformation->Ctrl_Info.CopyData = CopyRoutine;
+ /* sb in the original the cast to word was directly */
+ /* now the cast is made step by step */
+ (*CopyRoutine)(0);
+ Result = USB_SUCCESS;
+ }
+ else
+ {
+ Result = (*pProperty->Class_Data_Setup)(pInformation->USBbRequest);
+ if (Result == USB_NOT_READY)
+ {
+ pInformation->ControlState = PAUSE;
+ return;
+ }
+ }
+
+ if (pInformation->Ctrl_Info.Usb_wLength == 0xFFFF)
+ {
+ /* Data is not ready, wait it */
+ pInformation->ControlState = PAUSE;
+ return;
+ }
+ if ((Result == USB_UNSUPPORT) || (pInformation->Ctrl_Info.Usb_wLength == 0))
+ {
+ /* Unsupported request */
+ pInformation->ControlState = STALLED;
+ return;
+ }
+
+
+ if (ValBit(pInformation->USBbmRequestType, 7))
+ {
+ /* Device ==> Host */
+ vu32 wLength = pInformation->USBwLength;
+
+ /* Restrict the data length to be the one host asks */
+ if (pInformation->Ctrl_Info.Usb_wLength > wLength)
+ {
+ pInformation->Ctrl_Info.Usb_wLength = wLength;
+ }
+
+ else if (pInformation->Ctrl_Info.Usb_wLength < pInformation->USBwLength)
+ {
+ if (pInformation->Ctrl_Info.Usb_wLength < pProperty->MaxPacketSize)
+ {
+ Data_Mul_MaxPacketSize = FALSE;
+ }
+ else if ((pInformation->Ctrl_Info.Usb_wLength % pProperty->MaxPacketSize) == 0)
+ {
+ Data_Mul_MaxPacketSize = TRUE;
+ }
+ }
+
+ pInformation->Ctrl_Info.PacketSize = pProperty->MaxPacketSize;
+ DataStageIn();
+ }
+ else
+ {
+ pInformation->ControlState = OUT_DATA;
+ vSetEPRxStatus(EP_RX_VALID); /* enable for next data reception */
+ }
+
+ return;
+}
+
+/*******************************************************************************
+* Function Name : Setup0_Process
+* Description : Get the device request data and dispatch to individual process.
+* Input : None.
+* Output : None.
+* Return : Post0_Process.
+*******************************************************************************/
+u8 Setup0_Process(void)
+{
+
+ union
+ {
+ u8* b;
+ u16* w;
+ } pBuf;
+
+ pBuf.b = PMAAddr + (u8 *)(_GetEPRxAddr(ENDP0) * 2); /* *2 for 32 bits addr */
+
+ if (pInformation->ControlState != PAUSE)
+ {
+ pInformation->USBbmRequestType = *pBuf.b++; /* bmRequestType */
+ pInformation->USBbRequest = *pBuf.b++; /* bRequest */
+ pBuf.w++; /* word not accessed because of 32 bits addressing */
+ pInformation->USBwValue = ByteSwap(*pBuf.w++); /* wValue */
+ pBuf.w++; /* word not accessed because of 32 bits addressing */
+ pInformation->USBwIndex = ByteSwap(*pBuf.w++); /* wIndex */
+ pBuf.w++; /* word not accessed because of 32 bits addressing */
+ pInformation->USBwLength = *pBuf.w; /* wLength */
+ }
+
+ pInformation->ControlState = SETTING_UP;
+ if (pInformation->USBwLength == 0)
+ {
+ /* Setup with no data stage */
+ NoData_Setup0();
+ }
+ else
+ {
+ /* Setup with data stage */
+ Data_Setup0();
+ }
+ return Post0_Process();
+}
+
+/*******************************************************************************
+* Function Name : In0_Process
+* Description : Process the IN token on all default endpoint.
+* Input : None.
+* Output : None.
+* Return : Post0_Process.
+*******************************************************************************/
+u8 In0_Process(void)
+{
+ u32 ControlState = pInformation->ControlState;
+
+ if ((ControlState == IN_DATA) || (ControlState == LAST_IN_DATA))
+ {
+ DataStageIn();
+ /* ControlState may be changed outside the function */
+ ControlState = pInformation->ControlState;
+ }
+
+ else if (ControlState == WAIT_STATUS_IN)
+ {
+ if ((pInformation->USBbRequest == SET_ADDRESS) &&
+ (Type_Recipient == (STANDARD_REQUEST | DEVICE_RECIPIENT)))
+ {
+ SetDeviceAddress(pInformation->USBwValue0);
+ pUser_Standard_Requests->User_SetDeviceAddress();
+ }
+ (*pProperty->Process_Status_IN)();
+ ControlState = STALLED;
+ }
+
+ else
+ {
+ ControlState = STALLED;
+ }
+
+ pInformation->ControlState = ControlState;
+
+ return Post0_Process();
+}
+
+/*******************************************************************************
+* Function Name : Out0_Process
+* Description : Process the OUT token on all default endpoint.
+* Input : None.
+* Output : None.
+* Return : Post0_Process.
+*******************************************************************************/
+u8 Out0_Process(void)
+{
+ u32 ControlState = pInformation->ControlState;
+
+ if ((ControlState == OUT_DATA) || (ControlState == LAST_OUT_DATA))
+ {
+ DataStageOut();
+ ControlState = pInformation->ControlState; /* may be changed outside the function */
+ }
+
+ else if (ControlState == WAIT_STATUS_OUT)
+ {
+ (*pProperty->Process_Status_OUT)();
+ ControlState = STALLED;
+ }
+
+ else if ((ControlState == IN_DATA) || (ControlState == LAST_IN_DATA))
+ {
+ /* host aborts the transfer before finish */
+ ControlState = STALLED;
+ }
+
+ /* Unexpect state, STALL the endpoint */
+ else
+ {
+ ControlState = STALLED;
+ }
+
+ pInformation->ControlState = ControlState;
+
+ return Post0_Process();
+}
+
+/*******************************************************************************
+* Function Name : Post0_Process
+* Description : Stall the Endpoint 0 in case of error.
+* Input : None.
+* Output : None.
+* Return : - 0 if the control State is in PAUSE
+* - 1 if not.
+*******************************************************************************/
+u8 Post0_Process(void)
+{
+ SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
+
+ if (pInformation->ControlState == STALLED)
+ {
+ vSetEPRxStatus(EP_RX_STALL);
+ vSetEPTxStatus(EP_TX_STALL);
+ }
+
+ return (pInformation->ControlState == PAUSE);
+}
+
+/*******************************************************************************
+* Function Name : SetDeviceAddress.
+* Description : Set the device and all the used Endpoints addresses.
+* Input : - Val: device adress.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetDeviceAddress(u8 Val)
+{
+ u32 i;
+ u32 nEP = Device_Table.Total_Endpoint;
+
+ /* set address in every used endpoint */
+ for (i = 0; i < nEP; i++)
+ {
+ _SetEPAddress((u8)i, (u8)i);
+ } /* for */
+ _SetDADDR(Val | DADDR_EF); /* set device address and enable function */
+}
+
+/*******************************************************************************
+* Function Name : NOP_Process
+* Description : No operation function.
+* Input : None.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void NOP_Process(void)
+{
+}
+
+/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
diff --git a/core/usb/usb_lib/usb_core.h b/core/usb/usb_lib/usb_core.h new file mode 100644 index 0000000..efeaad8 --- /dev/null +++ b/core/usb/usb_lib/usb_core.h @@ -0,0 +1,244 @@ +/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name : usb_core.h
+* Author : MCD Application Team
+* Version : V2.2.1
+* Date : 09/22/2008
+* Description : Standard protocol processing functions prototypes
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_CORE_H
+#define __USB_CORE_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+typedef enum _CONTROL_STATE
+{
+ WAIT_SETUP, /* 0 */
+ SETTING_UP, /* 1 */
+ IN_DATA, /* 2 */
+ OUT_DATA, /* 3 */
+ LAST_IN_DATA, /* 4 */
+ LAST_OUT_DATA, /* 5 */
+ WAIT_STATUS_IN, /* 7 */
+ WAIT_STATUS_OUT, /* 8 */
+ STALLED, /* 9 */
+ PAUSE /* 10 */
+} CONTROL_STATE; /* The state machine states of a control pipe */
+
+typedef struct OneDescriptor
+{
+ u8 *Descriptor;
+ u16 Descriptor_Size;
+}
+ONE_DESCRIPTOR, *PONE_DESCRIPTOR;
+/* All the request process routines return a value of this type
+ If the return value is not SUCCESS or NOT_READY,
+ the software will STALL the correspond endpoint */
+typedef enum _RESULT
+{
+ USB_SUCCESS = 0, /* Process sucessfully */
+ USB_ERROR,
+ USB_UNSUPPORT,
+ USB_NOT_READY /* The process has not been finished, endpoint will be
+ NAK to further rquest */
+} RESULT;
+
+
+/*-*-*-*-*-*-*-*-*-*-* Definitions for endpoint level -*-*-*-*-*-*-*-*-*-*-*-*/
+typedef struct _ENDPOINT_INFO
+{
+ /* When send data out of the device,
+ CopyData() is used to get data buffer 'Length' bytes data
+ if Length is 0,
+ CopyData() returns the total length of the data
+ if the request is not supported, returns 0
+ (NEW Feature )
+ if CopyData() returns -1, the calling routine should not proceed
+ further and will resume the SETUP process by the class device
+ if Length is not 0,
+ CopyData() returns a pointer to indicate the data location
+ Usb_wLength is the data remain to be sent,
+ Usb_wOffset is the Offset of original data
+ When receive data from the host,
+ CopyData() is used to get user data buffer which is capable
+ of Length bytes data to copy data from the endpoint buffer.
+ if Length is 0,
+ CopyData() returns the available data length,
+ if Length is not 0,
+ CopyData() returns user buffer address
+ Usb_rLength is the data remain to be received,
+ Usb_rPointer is the Offset of data buffer
+ */
+ u16 Usb_wLength;
+ u16 Usb_wOffset;
+ u16 PacketSize;
+ u8 *(*CopyData)(u16 Length);
+}ENDPOINT_INFO;
+
+/*-*-*-*-*-*-*-*-*-*-*-* Definitions for device level -*-*-*-*-*-*-*-*-*-*-*-*/
+
+typedef struct _DEVICE
+{
+ u8 Total_Endpoint; /* Number of endpoints that are used */
+ u8 Total_Configuration;/* Number of configuration available */
+}
+DEVICE;
+
+typedef union
+{
+ u16 w;
+ struct BW
+ {
+ u8 bb1;
+ u8 bb0;
+ }
+ bw;
+} u16_u8;
+
+typedef struct _DEVICE_INFO
+{
+ u8 USBbmRequestType; /* bmRequestType */
+ u8 USBbRequest; /* bRequest */
+ u16_u8 USBwValues; /* wValue */
+ u16_u8 USBwIndexs; /* wIndex */
+ u16_u8 USBwLengths; /* wLength */
+
+ u8 ControlState; /* of type CONTROL_STATE */
+ u8 Current_Feature;
+ u8 Current_Configuration; /* Selected configuration */
+ u8 Current_Interface; /* Selected interface of current configuration */
+ u8 Current_AlternateSetting;/* Selected Alternate Setting of current
+ interface*/
+
+ ENDPOINT_INFO Ctrl_Info;
+}DEVICE_INFO;
+
+typedef struct _DEVICE_PROP
+{
+ void (*Init)(void); /* Initialize the device */
+ void (*Reset)(void); /* Reset routine of this device */
+
+ /* Device dependent process after the status stage */
+ void (*Process_Status_IN)(void);
+ void (*Process_Status_OUT)(void);
+
+ /* Procedure of process on setup stage of a class specified request with data stage */
+ /* All class specified requests with data stage are processed in Class_Data_Setup
+ Class_Data_Setup()
+ responses to check all special requests and fills ENDPOINT_INFO
+ according to the request
+ If IN tokens are expected, then wLength & wOffset will be filled
+ with the total transferring bytes and the starting position
+ If OUT tokens are expected, then rLength & rOffset will be filled
+ with the total expected bytes and the starting position in the buffer
+
+ If the request is valid, Class_Data_Setup returns SUCCESS, else UNSUPPORT
+
+ CAUTION:
+ Since GET_CONFIGURATION & GET_INTERFACE are highly related to
+ the individual classes, they will be checked and processed here.
+ */
+ RESULT (*Class_Data_Setup)(u8 RequestNo);
+
+ /* Procedure of process on setup stage of a class specified request without data stage */
+ /* All class specified requests without data stage are processed in Class_NoData_Setup
+ Class_NoData_Setup
+ responses to check all special requests and perform the request
+
+ CAUTION:
+ Since SET_CONFIGURATION & SET_INTERFACE are highly related to
+ the individual classes, they will be checked and processed here.
+ */
+ RESULT (*Class_NoData_Setup)(u8 RequestNo);
+
+ /*Class_Get_Interface_Setting
+ This function is used by the file usb_core.c to test if the selected Interface
+ and Alternate Setting (u8 Interface, u8 AlternateSetting) are supported by
+ the application.
+ This function is writing by user. It should return "SUCCESS" if the Interface
+ and Alternate Setting are supported by the application or "UNSUPPORT" if they
+ are not supported. */
+
+ RESULT (*Class_Get_Interface_Setting)(u8 Interface, u8 AlternateSetting);
+
+ u8* (*GetDeviceDescriptor)(u16 Length);
+ u8* (*GetConfigDescriptor)(u16 Length);
+ u8* (*GetStringDescriptor)(u16 Length);
+ u8* (*GetFunctionalDescriptor)(u16 Length);
+
+ u8* RxEP_buffer;
+ u8 MaxPacketSize;
+
+}DEVICE_PROP;
+
+typedef struct _USER_STANDARD_REQUESTS
+{
+ void (*User_GetConfiguration)(void); /* Get Configuration */
+ void (*User_SetConfiguration)(void); /* Set Configuration */
+ void (*User_GetInterface)(void); /* Get Interface */
+ void (*User_SetInterface)(void); /* Set Interface */
+ void (*User_GetStatus)(void); /* Get Status */
+ void (*User_ClearFeature)(void); /* Clear Feature */
+ void (*User_SetEndPointFeature)(void); /* Set Endpoint Feature */
+ void (*User_SetDeviceFeature)(void); /* Set Device Feature */
+ void (*User_SetDeviceAddress)(void); /* Set Device Address */
+}
+USER_STANDARD_REQUESTS;
+
+/* Exported constants --------------------------------------------------------*/
+#define Type_Recipient (pInformation->USBbmRequestType & (REQUEST_TYPE | RECIPIENT))
+
+#define Usb_rLength Usb_wLength
+#define Usb_rOffset Usb_wOffset
+
+#define USBwValue USBwValues.w
+#define USBwValue0 USBwValues.bw.bb0
+#define USBwValue1 USBwValues.bw.bb1
+#define USBwIndex USBwIndexs.w
+#define USBwIndex0 USBwIndexs.bw.bb0
+#define USBwIndex1 USBwIndexs.bw.bb1
+#define USBwLength USBwLengths.w
+#define USBwLength0 USBwLengths.bw.bb0
+#define USBwLength1 USBwLengths.bw.bb1
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+u8 Setup0_Process(void);
+u8 Post0_Process(void);
+u8 Out0_Process(void);
+u8 In0_Process(void);
+
+RESULT Standard_SetEndPointFeature(void);
+RESULT Standard_SetDeviceFeature(void);
+
+u8 *Standard_GetConfiguration(u16 Length);
+RESULT Standard_SetConfiguration(void);
+u8 *Standard_GetInterface(u16 Length);
+RESULT Standard_SetInterface(void);
+u8 *Standard_GetDescriptorData(u16 Length, PONE_DESCRIPTOR pDesc);
+
+u8 *Standard_GetStatus(u16 Length);
+RESULT Standard_ClearFeature(void);
+void SetDeviceAddress(u8);
+void NOP_Process(void);
+
+extern DEVICE_PROP Device_Property;
+extern USER_STANDARD_REQUESTS User_Standard_Requests;
+extern DEVICE Device_Table;
+extern DEVICE_INFO Device_Info;
+
+/* cells saving status during interrupt servicing */
+extern u16 SaveRState;
+extern u16 SaveTState;
+
+#endif /* __USB_CORE_H */
+
+/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
diff --git a/core/usb/usb_lib/usb_def.h b/core/usb/usb_lib/usb_def.h new file mode 100644 index 0000000..4261d46 --- /dev/null +++ b/core/usb/usb_lib/usb_def.h @@ -0,0 +1,80 @@ +/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name : usb_def.h
+* Author : MCD Application Team
+* Version : V2.2.1
+* Date : 09/22/2008
+* Description : Definitions related to USB Core
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_DEF_H
+#define __USB_DEF_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+typedef enum _RECIPIENT_TYPE
+{
+ DEVICE_RECIPIENT, /* Recipient device */
+ INTERFACE_RECIPIENT, /* Recipient interface */
+ ENDPOINT_RECIPIENT, /* Recipient endpoint */
+ OTHER_RECIPIENT
+} RECIPIENT_TYPE;
+
+
+typedef enum _STANDARD_REQUESTS
+{
+ GET_STATUS = 0,
+ CLEAR_FEATURE,
+ RESERVED1,
+ SET_FEATURE,
+ RESERVED2,
+ SET_ADDRESS,
+ GET_DESCRIPTOR,
+ SET_DESCRIPTOR,
+ GET_CONFIGURATION,
+ SET_CONFIGURATION,
+ GET_INTERFACE,
+ SET_INTERFACE,
+ TOTAL_sREQUEST, /* Total number of Standard request */
+ SYNCH_FRAME = 12
+} STANDARD_REQUESTS;
+
+/* Definition of "USBwValue" */
+typedef enum _DESCRIPTOR_TYPE
+{
+ DEVICE_DESCRIPTOR = 1,
+ CONFIG_DESCRIPTOR,
+ STRING_DESCRIPTOR,
+ INTERFACE_DESCRIPTOR,
+ ENDPOINT_DESCRIPTOR
+} DESCRIPTOR_TYPE;
+
+/* Feature selector of a SET_FEATURE or CLEAR_FEATURE */
+typedef enum _FEATURE_SELECTOR
+{
+ ENDPOINT_STALL,
+ DEVICE_REMOTE_WAKEUP
+} FEATURE_SELECTOR;
+
+/* Exported constants --------------------------------------------------------*/
+/* Definition of "USBbmRequestType" */
+#define REQUEST_TYPE 0x60 /* Mask to get request type */
+#define STANDARD_REQUEST 0x00 /* Standard request */
+#define CLASS_REQUEST 0x20 /* Class request */
+#define VENDOR_REQUEST 0x40 /* Vendor request */
+
+#define RECIPIENT 0x1F /* Mask to get recipient */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+#endif /* __USB_DEF_H */
+
+/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
diff --git a/core/usb/usb_lib/usb_init.c b/core/usb/usb_lib/usb_init.c new file mode 100644 index 0000000..5862145 --- /dev/null +++ b/core/usb/usb_lib/usb_init.c @@ -0,0 +1,64 @@ +/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name : usb_init.c
+* Author : MCD Application Team
+* Version : V2.2.1
+* Date : 09/22/2008
+* Description : Initialization routines & global variables
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Includes ------------------------------------------------------------------*/
+#include "usb_lib.h"
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* The number of current endpoint, it will be used to specify an endpoint */
+ u8 EPindex;
+/* The number of current device, it is an index to the Device_Table */
+/* u8 Device_no; */
+/* Points to the DEVICE_INFO structure of current device */
+/* The purpose of this register is to speed up the execution */
+DEVICE_INFO *pInformation;
+/* Points to the DEVICE_PROP structure of current device */
+/* The purpose of this register is to speed up the execution */
+DEVICE_PROP *pProperty;
+/* Temporary save the state of Rx & Tx status. */
+/* Whenever the Rx or Tx state is changed, its value is saved */
+/* in this variable first and will be set to the EPRB or EPRA */
+/* at the end of interrupt process */
+u16 SaveState ;
+u16 wInterrupt_Mask;
+DEVICE_INFO Device_Info;
+USER_STANDARD_REQUESTS *pUser_Standard_Requests;
+
+/* Extern variables ----------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/*******************************************************************************
+* Function Name : USB_Init
+* Description : USB system initialization
+* Input : None.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void USB_Init(void)
+{
+ pInformation = &Device_Info;
+ pInformation->ControlState = 2;
+ pProperty = &Device_Property;
+ pUser_Standard_Requests = &User_Standard_Requests;
+ /* Initialize devices one by one */
+
+ pProperty->Init();
+}
+
+/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
diff --git a/core/usb/usb_lib/usb_init.h b/core/usb/usb_lib/usb_init.h new file mode 100644 index 0000000..76e9d8a --- /dev/null +++ b/core/usb/usb_lib/usb_init.h @@ -0,0 +1,49 @@ +/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name : usb_init.h
+* Author : MCD Application Team
+* Version : V2.2.1
+* Date : 09/22/2008
+* Description : Initialization routines & global variables
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_INIT_H
+#define __USB_INIT_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+void USB_Init(void);
+
+/* External variables --------------------------------------------------------*/
+/* The number of current endpoint, it will be used to specify an endpoint */
+extern u8 EPindex;
+/* The number of current device, it is an index to the Device_Table */
+/*extern u8 Device_no; */
+/* Points to the DEVICE_INFO structure of current device */
+/* The purpose of this register is to speed up the execution */
+extern DEVICE_INFO* pInformation;
+/* Points to the DEVICE_PROP structure of current device */
+/* The purpose of this register is to speed up the execution */
+extern DEVICE_PROP* pProperty;
+/* Temporary save the state of Rx & Tx status. */
+/* Whenever the Rx or Tx state is changed, its value is saved */
+/* in this variable first and will be set to the EPRB or EPRA */
+/* at the end of interrupt process */
+extern USER_STANDARD_REQUESTS *pUser_Standard_Requests;
+
+extern u16 SaveState ;
+extern u16 wInterrupt_Mask;
+
+#endif /* __USB_INIT_H */
+
+/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
diff --git a/core/usb/usb_lib/usb_int.c b/core/usb/usb_lib/usb_int.c new file mode 100644 index 0000000..f1d82be --- /dev/null +++ b/core/usb/usb_lib/usb_int.c @@ -0,0 +1,192 @@ +/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name : usb_int.c
+* Author : MCD Application Team
+* Version : V2.2.1
+* Date : 09/22/2008
+* Description : Endpoint CTR (Low and High) interrupt's service routines
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Includes ------------------------------------------------------------------*/
+#include "usb_lib.h"
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+u16 SaveRState;
+u16 SaveTState;
+
+/* Extern variables ----------------------------------------------------------*/
+extern void (*pEpInt_IN[7])(void); /* Handles IN interrupts */
+extern void (*pEpInt_OUT[7])(void); /* Handles OUT interrupts */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/*******************************************************************************
+* Function Name : CTR_LP.
+* Description : Low priority Endpoint Correct Transfer interrupt's service
+* routine.
+* Input : None.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void CTR_LP(void)
+{
+ u32 wEPVal = 0;
+ /* stay in loop while pending ints */
+ while (((wIstr = _GetISTR()) & ISTR_CTR) != 0)
+ {
+ _SetISTR((u16)CLR_CTR); /* clear CTR flag */
+ /* extract highest priority endpoint number */
+ EPindex = (u8)(wIstr & ISTR_EP_ID);
+ if (EPindex == 0)
+ {
+ /* Decode and service control endpoint interrupt */
+ /* calling related service routine */
+ /* (Setup0_Process, In0_Process, Out0_Process) */
+
+ /* save RX & TX status */
+ /* and set both to NAK */
+ SaveRState = _GetEPRxStatus(ENDP0);
+ SaveTState = _GetEPTxStatus(ENDP0);
+ _SetEPRxStatus(ENDP0, EP_RX_NAK);
+ _SetEPTxStatus(ENDP0, EP_TX_NAK);
+
+
+ /* DIR bit = origin of the interrupt */
+
+ if ((wIstr & ISTR_DIR) == 0)
+ {
+ /* DIR = 0 */
+
+ /* DIR = 0 => IN int */
+ /* DIR = 0 implies that (EP_CTR_TX = 1) always */
+
+
+ _ClearEP_CTR_TX(ENDP0);
+ In0_Process();
+
+ /* before terminate set Tx & Rx status */
+ _SetEPRxStatus(ENDP0, SaveRState);
+ _SetEPTxStatus(ENDP0, SaveTState);
+ return;
+ }
+ else
+ {
+ /* DIR = 1 */
+
+ /* DIR = 1 & CTR_RX => SETUP or OUT int */
+ /* DIR = 1 & (CTR_TX | CTR_RX) => 2 int pending */
+
+ wEPVal = _GetENDPOINT(ENDP0);
+ if ((wEPVal & EP_CTR_TX) != 0)
+ {
+ _ClearEP_CTR_TX(ENDP0);
+ In0_Process();
+ /* before terminate set Tx & Rx status */
+ _SetEPRxStatus(ENDP0, SaveRState);
+ _SetEPTxStatus(ENDP0, SaveTState);
+ return;
+ }
+ else if ((wEPVal &EP_SETUP) != 0)
+ {
+ _ClearEP_CTR_RX(ENDP0); /* SETUP bit kept frozen while CTR_RX = 1 */
+ Setup0_Process();
+ /* before terminate set Tx & Rx status */
+ _SetEPRxStatus(ENDP0, SaveRState);
+ _SetEPTxStatus(ENDP0, SaveTState);
+ return;
+ }
+
+ else if ((wEPVal & EP_CTR_RX) != 0)
+ {
+ _ClearEP_CTR_RX(ENDP0);
+ Out0_Process();
+ /* before terminate set Tx & Rx status */
+ _SetEPRxStatus(ENDP0, SaveRState);
+ _SetEPTxStatus(ENDP0, SaveTState);
+ return;
+ }
+ }
+ }/* if(EPindex == 0) */
+ else
+ {
+ /* Decode and service non control endpoints interrupt */
+
+ /* process related endpoint register */
+ wEPVal = _GetENDPOINT(EPindex);
+ if ((wEPVal & EP_CTR_RX) != 0)
+ {
+ /* clear int flag */
+ _ClearEP_CTR_RX(EPindex);
+
+ /* call OUT service function */
+ (*pEpInt_OUT[EPindex-1])();
+
+ } /* if((wEPVal & EP_CTR_RX) */
+
+ if ((wEPVal & EP_CTR_TX) != 0)
+ {
+ /* clear int flag */
+ _ClearEP_CTR_TX(EPindex);
+
+ /* call IN service function */
+ (*pEpInt_IN[EPindex-1])();
+ } /* if((wEPVal & EP_CTR_TX) != 0) */
+
+ }/* if(EPindex == 0) else */
+
+ }/* while(...) */
+}
+
+/*******************************************************************************
+* Function Name : CTR_HP.
+* Description : High Priority Endpoint Correct Transfer interrupt's service
+* routine.
+* Input : None.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void CTR_HP(void)
+{
+ u32 wEPVal = 0;
+
+ while (((wIstr = _GetISTR()) & ISTR_CTR) != 0)
+ {
+ _SetISTR((u16)CLR_CTR); /* clear CTR flag */
+ /* extract highest priority endpoint number */
+ EPindex = (u8)(wIstr & ISTR_EP_ID);
+ /* process related endpoint register */
+ wEPVal = _GetENDPOINT(EPindex);
+ if ((wEPVal & EP_CTR_RX) != 0)
+ {
+ /* clear int flag */
+ _ClearEP_CTR_RX(EPindex);
+
+ /* call OUT service function */
+ (*pEpInt_OUT[EPindex-1])();
+
+ } /* if((wEPVal & EP_CTR_RX) */
+ else if ((wEPVal & EP_CTR_TX) != 0)
+ {
+ /* clear int flag */
+ _ClearEP_CTR_TX(EPindex);
+
+ /* call IN service function */
+ (*pEpInt_IN[EPindex-1])();
+
+
+ } /* if((wEPVal & EP_CTR_TX) != 0) */
+
+ }/* while(...) */
+}
+
+/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
diff --git a/core/usb/usb_lib/usb_int.h b/core/usb/usb_lib/usb_int.h new file mode 100644 index 0000000..1eb18a7 --- /dev/null +++ b/core/usb/usb_lib/usb_int.h @@ -0,0 +1,33 @@ +/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name : usb_int.h
+* Author : MCD Application Team
+* Version : V2.2.1
+* Date : 09/22/2008
+* Description : Endpoint CTR (Low and High) interrupt's service routines
+* prototypes
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_INT_H
+#define __USB_INT_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+void CTR_LP(void);
+void CTR_HP(void);
+
+/* External variables --------------------------------------------------------*/
+
+#endif /* __USB_INT_H */
+
+/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
diff --git a/core/usb/usb_lib/usb_lib.h b/core/usb/usb_lib/usb_lib.h new file mode 100644 index 0000000..5d14b5a --- /dev/null +++ b/core/usb/usb_lib/usb_lib.h @@ -0,0 +1,37 @@ +/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name : usb_lib.h
+* Author : MCD Application Team
+* Version : V2.2.1
+* Date : 09/22/2008
+* Description : USB library include files
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_LIB_H
+#define __USB_LIB_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "usb_type.h"
+#include "usb_regs.h"
+#include "usb_def.h"
+#include "usb_core.h"
+#include "usb_init.h"
+#include "usb_mem.h"
+#include "usb_int.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+/* External variables --------------------------------------------------------*/
+
+#endif /* __USB_LIB_H */
+
+/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
diff --git a/core/usb/usb_lib/usb_mem.c b/core/usb/usb_lib/usb_mem.c new file mode 100644 index 0000000..ee698c5 --- /dev/null +++ b/core/usb/usb_lib/usb_mem.c @@ -0,0 +1,73 @@ +/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name : usb_mem.c
+* Author : MCD Application Team
+* Version : V2.2.1
+* Date : 09/22/2008
+* Description : Utility functions for memory transfers to/from PMA
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Includes ------------------------------------------------------------------*/
+#include "usb_lib.h"
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Extern variables ----------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/*******************************************************************************
+* Function Name : UserToPMABufferCopy
+* Description : Copy a buffer from user memory area to packet memory area (PMA)
+* Input : - pbUsrBuf: pointer to user memory area.
+* - wPMABufAddr: address into PMA.
+* - wNBytes: no. of bytes to be copied.
+* Output : None.
+* Return : None .
+*******************************************************************************/
+void UserToPMABufferCopy(u8 *pbUsrBuf, u16 wPMABufAddr, u16 wNBytes)
+{
+ u32 n = (wNBytes + 1) >> 1; /* n = (wNBytes + 1) / 2 */
+ u32 i, temp1, temp2;
+ u16 *pdwVal;
+ pdwVal = (u16 *)(wPMABufAddr * 2 + PMAAddr);
+ for (i = n; i != 0; i--)
+ {
+ temp1 = (u16) * pbUsrBuf;
+ pbUsrBuf++;
+ temp2 = temp1 | (u16) * pbUsrBuf << 8;
+ *pdwVal++ = temp2;
+ pdwVal++;
+ pbUsrBuf++;
+ }
+}
+/*******************************************************************************
+* Function Name : PMAToUserBufferCopy
+* Description : Copy a buffer from user memory area to packet memory area (PMA)
+* Input : - pbUsrBuf = pointer to user memory area.
+* - wPMABufAddr = address into PMA.
+* - wNBytes = no. of bytes to be copied.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void PMAToUserBufferCopy(u8 *pbUsrBuf, u16 wPMABufAddr, u16 wNBytes)
+{
+ u32 n = (wNBytes + 1) >> 1;/* /2*/
+ u32 i;
+ u32 *pdwVal;
+ pdwVal = (u32 *)(wPMABufAddr * 2 + PMAAddr);
+ for (i = n; i != 0; i--)
+ {
+ *(u16*)pbUsrBuf++ = *pdwVal++;
+ pbUsrBuf++;
+ }
+}
+
+/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
diff --git a/core/usb/usb_lib/usb_mem.h b/core/usb/usb_lib/usb_mem.h new file mode 100644 index 0000000..d4cc4a6 --- /dev/null +++ b/core/usb/usb_lib/usb_mem.h @@ -0,0 +1,32 @@ +/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name : usb_mem.h
+* Author : MCD Application Team
+* Version : V2.2.1
+* Date : 09/22/2008
+* Description : Utility prototypes functions for memory/PMA transfers
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_MEM_H
+#define __USB_MEM_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+void UserToPMABufferCopy(u8 *pbUsrBuf, u16 wPMABufAddr, u16 wNBytes);
+void PMAToUserBufferCopy(u8 *pbUsrBuf, u16 wPMABufAddr, u16 wNBytes);
+
+/* External variables --------------------------------------------------------*/
+
+#endif /*__USB_MEM_H*/
+
+/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
diff --git a/core/usb/usb_lib/usb_regs.c b/core/usb/usb_lib/usb_regs.c new file mode 100644 index 0000000..c28ef5a --- /dev/null +++ b/core/usb/usb_lib/usb_regs.c @@ -0,0 +1,748 @@ +/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name : usb_regs.c
+* Author : MCD Application Team
+* Version : V2.2.1
+* Date : 09/22/2008
+* Description : Interface functions to USB cell registers
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Includes ------------------------------------------------------------------*/
+#include "usb_lib.h"
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Extern variables ----------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/*******************************************************************************
+* Function Name : SetCNTR.
+* Description : Set the CNTR register value.
+* Input : wRegValue: new register value.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetCNTR(u16 wRegValue)
+{
+ _SetCNTR(wRegValue);
+}
+
+/*******************************************************************************
+* Function Name : GetCNTR.
+* Description : returns the CNTR register value.
+* Input : None.
+* Output : None.
+* Return : CNTR register Value.
+*******************************************************************************/
+u16 GetCNTR(void)
+{
+ return(_GetCNTR());
+}
+
+/*******************************************************************************
+* Function Name : SetISTR.
+* Description : Set the ISTR register value.
+* Input : wRegValue: new register value.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetISTR(u16 wRegValue)
+{
+ _SetISTR(wRegValue);
+}
+
+/*******************************************************************************
+* Function Name : GetISTR
+* Description : Returns the ISTR register value.
+* Input : None.
+* Output : None.
+* Return : ISTR register Value
+*******************************************************************************/
+u16 GetISTR(void)
+{
+ return(_GetISTR());
+}
+
+/*******************************************************************************
+* Function Name : GetFNR
+* Description : Returns the FNR register value.
+* Input : None.
+* Output : None.
+* Return : FNR register Value
+*******************************************************************************/
+u16 GetFNR(void)
+{
+ return(_GetFNR());
+}
+
+/*******************************************************************************
+* Function Name : SetDADDR
+* Description : Set the DADDR register value.
+* Input : wRegValue: new register value.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetDADDR(u16 wRegValue)
+{
+ _SetDADDR(wRegValue);
+}
+
+/*******************************************************************************
+* Function Name : GetDADDR
+* Description : Returns the DADDR register value.
+* Input : None.
+* Output : None.
+* Return : DADDR register Value
+*******************************************************************************/
+u16 GetDADDR(void)
+{
+ return(_GetDADDR());
+}
+
+/*******************************************************************************
+* Function Name : SetBTABLE
+* Description : Set the BTABLE.
+* Input : wRegValue: New register value.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetBTABLE(u16 wRegValue)
+{
+ _SetBTABLE(wRegValue);
+}
+
+/*******************************************************************************
+* Function Name : GetBTABLE.
+* Description : Returns the BTABLE register value.
+* Input : None.
+* Output : None.
+* Return : BTABLE address.
+*******************************************************************************/
+u16 GetBTABLE(void)
+{
+ return(_GetBTABLE());
+}
+
+/*******************************************************************************
+* Function Name : SetENDPOINT
+* Description : Setthe Endpoint register value.
+* Input : bEpNum: Endpoint Number.
+* wRegValue.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetENDPOINT(u8 bEpNum, u16 wRegValue)
+{
+ _SetENDPOINT(bEpNum, wRegValue);
+}
+
+/*******************************************************************************
+* Function Name : GetENDPOINT
+* Description : Return the Endpoint register value.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Endpoint register value.
+*******************************************************************************/
+u16 GetENDPOINT(u8 bEpNum)
+{
+ return(_GetENDPOINT(bEpNum));
+}
+
+/*******************************************************************************
+* Function Name : SetEPType
+* Description : sets the type in the endpoint register.
+* Input : bEpNum: Endpoint Number.
+* wType: type definition.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPType(u8 bEpNum, u16 wType)
+{
+ _SetEPType(bEpNum, wType);
+}
+
+/*******************************************************************************
+* Function Name : GetEPType
+* Description : Returns the endpoint type.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Endpoint Type
+*******************************************************************************/
+u16 GetEPType(u8 bEpNum)
+{
+ return(_GetEPType(bEpNum));
+}
+
+/*******************************************************************************
+* Function Name : SetEPTxStatus
+* Description : Set the status of Tx endpoint.
+* Input : bEpNum: Endpoint Number.
+* wState: new state.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPTxStatus(u8 bEpNum, u16 wState)
+{
+ _SetEPTxStatus(bEpNum, wState);
+}
+
+/*******************************************************************************
+* Function Name : SetEPRxStatus
+* Description : Set the status of Rx endpoint.
+* Input : bEpNum: Endpoint Number.
+* wState: new state.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPRxStatus(u8 bEpNum, u16 wState)
+{
+ _SetEPRxStatus(bEpNum, wState);
+}
+
+/*******************************************************************************
+* Function Name : SetDouBleBuffEPStall
+* Description : sets the status for Double Buffer Endpoint to STALL
+* Input : bEpNum: Endpoint Number.
+* bDir: Endpoint direction.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetDouBleBuffEPStall(u8 bEpNum, u8 bDir)
+{
+ u16 Endpoint_DTOG_Status;
+ Endpoint_DTOG_Status = GetENDPOINT(bEpNum);
+ if (bDir == EP_DBUF_OUT)
+ { /* OUT double buffered endpoint */
+ _SetENDPOINT(bEpNum, Endpoint_DTOG_Status & ~EPRX_DTOG1);
+ }
+ else if (bDir == EP_DBUF_IN)
+ { /* IN double buffered endpoint */
+ _SetENDPOINT(bEpNum, Endpoint_DTOG_Status & ~EPTX_DTOG1);
+ }
+}
+
+/*******************************************************************************
+* Function Name : GetEPTxStatus
+* Description : Returns the endpoint Tx status.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Endpoint TX Status
+*******************************************************************************/
+u16 GetEPTxStatus(u8 bEpNum)
+{
+ return(_GetEPTxStatus(bEpNum));
+}
+
+/*******************************************************************************
+* Function Name : GetEPRxStatus
+* Description : Returns the endpoint Rx status.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Endpoint RX Status
+*******************************************************************************/
+u16 GetEPRxStatus(u8 bEpNum)
+{
+ return(_GetEPRxStatus(bEpNum));
+}
+
+/*******************************************************************************
+* Function Name : SetEPTxValid
+* Description : Valid the endpoint Tx Status.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPTxValid(u8 bEpNum)
+{
+ _SetEPTxStatus(bEpNum, EP_TX_VALID);
+}
+
+/*******************************************************************************
+* Function Name : SetEPRxValid
+* Description : Valid the endpoint Rx Status.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPRxValid(u8 bEpNum)
+{
+ _SetEPRxStatus(bEpNum, EP_RX_VALID);
+}
+
+/*******************************************************************************
+* Function Name : SetEP_KIND
+* Description : Clear the EP_KIND bit.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEP_KIND(u8 bEpNum)
+{
+ _SetEP_KIND(bEpNum);
+}
+
+/*******************************************************************************
+* Function Name : ClearEP_KIND
+* Description : set the EP_KIND bit.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void ClearEP_KIND(u8 bEpNum)
+{
+ _ClearEP_KIND(bEpNum);
+}
+/*******************************************************************************
+* Function Name : Clear_Status_Out
+* Description : Clear the Status Out of the related Endpoint
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void Clear_Status_Out(u8 bEpNum)
+{
+ _ClearEP_KIND(bEpNum);
+}
+/*******************************************************************************
+* Function Name : Set_Status_Out
+* Description : Set the Status Out of the related Endpoint
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void Set_Status_Out(u8 bEpNum)
+{
+ _SetEP_KIND(bEpNum);
+}
+/*******************************************************************************
+* Function Name : SetEPDoubleBuff
+* Description : Enable the double buffer feature for the endpoint.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPDoubleBuff(u8 bEpNum)
+{
+ _SetEP_KIND(bEpNum);
+}
+/*******************************************************************************
+* Function Name : ClearEPDoubleBuff
+* Description : Disable the double buffer feature for the endpoint.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void ClearEPDoubleBuff(u8 bEpNum)
+{
+ _ClearEP_KIND(bEpNum);
+}
+/*******************************************************************************
+* Function Name : GetTxStallStatus
+* Description : Returns the Stall status of the Tx endpoint.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Tx Stall status.
+*******************************************************************************/
+u16 GetTxStallStatus(u8 bEpNum)
+{
+ return(_GetTxStallStatus(bEpNum));
+}
+/*******************************************************************************
+* Function Name : GetRxStallStatus
+* Description : Returns the Stall status of the Rx endpoint.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Rx Stall status.
+*******************************************************************************/
+u16 GetRxStallStatus(u8 bEpNum)
+{
+ return(_GetRxStallStatus(bEpNum));
+}
+/*******************************************************************************
+* Function Name : ClearEP_CTR_RX
+* Description : Clear the CTR_RX bit.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void ClearEP_CTR_RX(u8 bEpNum)
+{
+ _ClearEP_CTR_RX(bEpNum);
+}
+/*******************************************************************************
+* Function Name : ClearEP_CTR_TX
+* Description : Clear the CTR_TX bit.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void ClearEP_CTR_TX(u8 bEpNum)
+{
+ _ClearEP_CTR_TX(bEpNum);
+}
+/*******************************************************************************
+* Function Name : ToggleDTOG_RX
+* Description : Toggle the DTOG_RX bit.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void ToggleDTOG_RX(u8 bEpNum)
+{
+ _ToggleDTOG_RX(bEpNum);
+}
+/*******************************************************************************
+* Function Name : ToggleDTOG_TX
+* Description : Toggle the DTOG_TX bit.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void ToggleDTOG_TX(u8 bEpNum)
+{
+ _ToggleDTOG_TX(bEpNum);
+}
+/*******************************************************************************
+* Function Name : ClearDTOG_RX.
+* Description : Clear the DTOG_RX bit.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void ClearDTOG_RX(u8 bEpNum)
+{
+ _ClearDTOG_RX(bEpNum);
+}
+/*******************************************************************************
+* Function Name : ClearDTOG_TX.
+* Description : Clear the DTOG_TX bit.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void ClearDTOG_TX(u8 bEpNum)
+{
+ _ClearDTOG_TX(bEpNum);
+}
+/*******************************************************************************
+* Function Name : SetEPAddress
+* Description : Set the endpoint address.
+* Input : bEpNum: Endpoint Number.
+* bAddr: New endpoint address.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPAddress(u8 bEpNum, u8 bAddr)
+{
+ _SetEPAddress(bEpNum, bAddr);
+}
+/*******************************************************************************
+* Function Name : GetEPAddress
+* Description : Get the endpoint address.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Endpoint address.
+*******************************************************************************/
+u8 GetEPAddress(u8 bEpNum)
+{
+ return(_GetEPAddress(bEpNum));
+}
+/*******************************************************************************
+* Function Name : SetEPTxAddr
+* Description : Set the endpoint Tx buffer address.
+* Input : bEpNum: Endpoint Number.
+* wAddr: new address.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPTxAddr(u8 bEpNum, u16 wAddr)
+{
+ _SetEPTxAddr(bEpNum, wAddr);
+}
+/*******************************************************************************
+* Function Name : SetEPRxAddr
+* Description : Set the endpoint Rx buffer address.
+* Input : bEpNum: Endpoint Number.
+* wAddr: new address.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPRxAddr(u8 bEpNum, u16 wAddr)
+{
+ _SetEPRxAddr(bEpNum, wAddr);
+}
+/*******************************************************************************
+* Function Name : GetEPTxAddr
+* Description : Returns the endpoint Tx buffer address.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Rx buffer address.
+*******************************************************************************/
+u16 GetEPTxAddr(u8 bEpNum)
+{
+ return(_GetEPTxAddr(bEpNum));
+}
+/*******************************************************************************
+* Function Name : GetEPRxAddr.
+* Description : Returns the endpoint Rx buffer address.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Rx buffer address.
+*******************************************************************************/
+u16 GetEPRxAddr(u8 bEpNum)
+{
+ return(_GetEPRxAddr(bEpNum));
+}
+/*******************************************************************************
+* Function Name : SetEPTxCount.
+* Description : Set the Tx count.
+* Input : bEpNum: Endpoint Number.
+* wCount: new count value.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPTxCount(u8 bEpNum, u16 wCount)
+{
+ _SetEPTxCount(bEpNum, wCount);
+}
+/*******************************************************************************
+* Function Name : SetEPCountRxReg.
+* Description : Set the Count Rx Register value.
+* Input : *pdwReg: point to the register.
+* wCount: the new register value.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPCountRxReg(u32 *pdwReg, u16 wCount)
+{
+ _SetEPCountRxReg(dwReg, wCount);
+}
+/*******************************************************************************
+* Function Name : SetEPRxCount
+* Description : Set the Rx count.
+* Input : bEpNum: Endpoint Number.
+* wCount: the new count value.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPRxCount(u8 bEpNum, u16 wCount)
+{
+ _SetEPRxCount(bEpNum, wCount);
+}
+/*******************************************************************************
+* Function Name : GetEPTxCount
+* Description : Get the Tx count.
+* Input : bEpNum: Endpoint Number.
+* Output : None
+* Return : Tx count value.
+*******************************************************************************/
+u16 GetEPTxCount(u8 bEpNum)
+{
+ return(_GetEPTxCount(bEpNum));
+}
+/*******************************************************************************
+* Function Name : GetEPRxCount
+* Description : Get the Rx count.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Rx count value.
+*******************************************************************************/
+u16 GetEPRxCount(u8 bEpNum)
+{
+ return(_GetEPRxCount(bEpNum));
+}
+/*******************************************************************************
+* Function Name : SetEPDblBuffAddr
+* Description : Set the addresses of the buffer 0 and 1.
+* Input : bEpNum: Endpoint Number.
+* wBuf0Addr: new address of buffer 0.
+* wBuf1Addr: new address of buffer 1.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPDblBuffAddr(u8 bEpNum, u16 wBuf0Addr, u16 wBuf1Addr)
+{
+ _SetEPDblBuffAddr(bEpNum, wBuf0Addr, wBuf1Addr);
+}
+/*******************************************************************************
+* Function Name : SetEPDblBuf0Addr
+* Description : Set the Buffer 1 address.
+* Input : bEpNum: Endpoint Number
+* wBuf0Addr: new address.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPDblBuf0Addr(u8 bEpNum, u16 wBuf0Addr)
+{
+ _SetEPDblBuf0Addr(bEpNum, wBuf0Addr);
+}
+/*******************************************************************************
+* Function Name : SetEPDblBuf1Addr
+* Description : Set the Buffer 1 address.
+* Input : bEpNum: Endpoint Number
+* wBuf1Addr: new address.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPDblBuf1Addr(u8 bEpNum, u16 wBuf1Addr)
+{
+ _SetEPDblBuf1Addr(bEpNum, wBuf1Addr);
+}
+/*******************************************************************************
+* Function Name : GetEPDblBuf0Addr
+* Description : Returns the address of the Buffer 0.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+u16 GetEPDblBuf0Addr(u8 bEpNum)
+{
+ return(_GetEPDblBuf0Addr(bEpNum));
+}
+/*******************************************************************************
+* Function Name : GetEPDblBuf1Addr
+* Description : Returns the address of the Buffer 1.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Address of the Buffer 1.
+*******************************************************************************/
+u16 GetEPDblBuf1Addr(u8 bEpNum)
+{
+ return(_GetEPDblBuf1Addr(bEpNum));
+}
+/*******************************************************************************
+* Function Name : SetEPDblBuffCount
+* Description : Set the number of bytes for a double Buffer
+* endpoint.
+* Input : bEpNum,bDir, wCount
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPDblBuffCount(u8 bEpNum, u8 bDir, u16 wCount)
+{
+ _SetEPDblBuffCount(bEpNum, bDir, wCount);
+}
+/*******************************************************************************
+* Function Name : SetEPDblBuf0Count
+* Description : Set the number of bytes in the buffer 0 of a double Buffer
+* endpoint.
+* Input : bEpNum, bDir, wCount
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPDblBuf0Count(u8 bEpNum, u8 bDir, u16 wCount)
+{
+ _SetEPDblBuf0Count(bEpNum, bDir, wCount);
+}
+/*******************************************************************************
+* Function Name : SetEPDblBuf1Count
+* Description : Set the number of bytes in the buffer 0 of a double Buffer
+* endpoint.
+* Input : bEpNum, bDir, wCount
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPDblBuf1Count(u8 bEpNum, u8 bDir, u16 wCount)
+{
+ _SetEPDblBuf1Count(bEpNum, bDir, wCount);
+}
+/*******************************************************************************
+* Function Name : GetEPDblBuf0Count
+* Description : Returns the number of byte received in the buffer 0 of a double
+* Buffer endpoint.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Endpoint Buffer 0 count
+*******************************************************************************/
+u16 GetEPDblBuf0Count(u8 bEpNum)
+{
+ return(_GetEPDblBuf0Count(bEpNum));
+}
+/*******************************************************************************
+* Function Name : GetEPDblBuf1Count
+* Description : Returns the number of data received in the buffer 1 of a double
+* Buffer endpoint.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Endpoint Buffer 1 count.
+*******************************************************************************/
+u16 GetEPDblBuf1Count(u8 bEpNum)
+{
+ return(_GetEPDblBuf1Count(bEpNum));
+}
+/*******************************************************************************
+* Function Name : GetEPDblBufDir
+* Description : gets direction of the double buffered endpoint
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : EP_DBUF_OUT, EP_DBUF_IN,
+* EP_DBUF_ERR if the endpoint counter not yet programmed.
+*******************************************************************************/
+EP_DBUF_DIR GetEPDblBufDir(u8 bEpNum)
+{
+ if ((u16)(*_pEPRxCount(bEpNum) & 0xFC00) != 0)
+ return(EP_DBUF_OUT);
+ else if (((u16)(*_pEPTxCount(bEpNum)) & 0x03FF) != 0)
+ return(EP_DBUF_IN);
+ else
+ return(EP_DBUF_ERR);
+}
+/*******************************************************************************
+* Function Name : FreeUserBuffer
+* Description : free buffer used from the application realizing it to the line
+ toggles bit SW_BUF in the double buffered endpoint register
+* Input : bEpNum, bDir
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void FreeUserBuffer(u8 bEpNum, u8 bDir)
+{
+ if (bDir == EP_DBUF_OUT)
+ { /* OUT double buffered endpoint */
+ _ToggleDTOG_TX(bEpNum);
+ }
+ else if (bDir == EP_DBUF_IN)
+ { /* IN double buffered endpoint */
+ _ToggleDTOG_RX(bEpNum);
+ }
+}
+
+/*******************************************************************************
+* Function Name : ToWord
+* Description : merge two byte in a word.
+* Input : bh: byte high, bl: bytes low.
+* Output : None.
+* Return : resulted word.
+*******************************************************************************/
+u16 ToWord(u8 bh, u8 bl)
+{
+ u16 wRet;
+ wRet = (u16)bl | ((u16)bh << 8);
+ return(wRet);
+}
+/*******************************************************************************
+* Function Name : ByteSwap
+* Description : Swap two byte in a word.
+* Input : wSwW: word to Swap.
+* Output : None.
+* Return : resulted word.
+*******************************************************************************/
+u16 ByteSwap(u16 wSwW)
+{
+ u8 bTemp;
+ u16 wRet;
+ bTemp = (u8)(wSwW & 0xff);
+ wRet = (wSwW >> 8) | ((u16)bTemp << 8);
+ return(wRet);
+}
+
+/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
diff --git a/core/usb/usb_lib/usb_regs.h b/core/usb/usb_lib/usb_regs.h new file mode 100644 index 0000000..8f32e44 --- /dev/null +++ b/core/usb/usb_lib/usb_regs.h @@ -0,0 +1,619 @@ +/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name : usb_regs.h
+* Author : MCD Application Team
+* Version : V2.2.1
+* Date : 09/22/2008
+* Description : Interface prototype functions to USB cell registers
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_REGS_H
+#define __USB_REGS_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+typedef enum _EP_DBUF_DIR
+{
+ /* double buffered endpoint direction */
+ EP_DBUF_ERR,
+ EP_DBUF_OUT,
+ EP_DBUF_IN
+}EP_DBUF_DIR;
+
+/* endpoint buffer number */
+enum EP_BUF_NUM
+{
+ EP_NOBUF,
+ EP_BUF0,
+ EP_BUF1
+};
+
+/* Exported constants --------------------------------------------------------*/
+#define RegBase (0x40005C00L) /* USB_IP Peripheral Registers base address */
+#define PMAAddr (0x40006000L) /* USB_IP Packet Memory Area base address */
+
+/******************************************************************************/
+/* General registers */
+/******************************************************************************/
+
+/* Control register */
+#define CNTR ((volatile unsigned *)(RegBase + 0x40))
+/* Interrupt status register */
+#define ISTR ((volatile unsigned *)(RegBase + 0x44))
+/* Frame number register */
+#define FNR ((volatile unsigned *)(RegBase + 0x48))
+/* Device address register */
+#define DADDR ((volatile unsigned *)(RegBase + 0x4C))
+/* Buffer Table address register */
+#define BTABLE ((volatile unsigned *)(RegBase + 0x50))
+/******************************************************************************/
+/* Endpoint registers */
+/******************************************************************************/
+#define EP0REG ((volatile unsigned *)(RegBase)) /* endpoint 0 register address */
+
+/* endpoints enumeration */
+#define ENDP0 ((u8)0)
+#define ENDP1 ((u8)1)
+#define ENDP2 ((u8)2)
+#define ENDP3 ((u8)3)
+#define ENDP4 ((u8)4)
+#define ENDP5 ((u8)5)
+#define ENDP6 ((u8)6)
+#define ENDP7 ((u8)7)
+/******************************************************************************/
+/* ISTR interrupt events */
+/******************************************************************************/
+#define ISTR_CTR (0x8000) /* Correct TRansfer (clear-only bit) */
+#define ISTR_DOVR (0x4000) /* DMA OVeR/underrun (clear-only bit) */
+#define ISTR_ERR (0x2000) /* ERRor (clear-only bit) */
+#define ISTR_WKUP (0x1000) /* WaKe UP (clear-only bit) */
+#define ISTR_SUSP (0x0800) /* SUSPend (clear-only bit) */
+#define ISTR_RESET (0x0400) /* RESET (clear-only bit) */
+#define ISTR_SOF (0x0200) /* Start Of Frame (clear-only bit) */
+#define ISTR_ESOF (0x0100) /* Expected Start Of Frame (clear-only bit) */
+
+
+#define ISTR_DIR (0x0010) /* DIRection of transaction (read-only bit) */
+#define ISTR_EP_ID (0x000F) /* EndPoint IDentifier (read-only bit) */
+
+#define CLR_CTR (~ISTR_CTR) /* clear Correct TRansfer bit */
+#define CLR_DOVR (~ISTR_DOVR) /* clear DMA OVeR/underrun bit*/
+#define CLR_ERR (~ISTR_ERR) /* clear ERRor bit */
+#define CLR_WKUP (~ISTR_WKUP) /* clear WaKe UP bit */
+#define CLR_SUSP (~ISTR_SUSP) /* clear SUSPend bit */
+#define CLR_RESET (~ISTR_RESET) /* clear RESET bit */
+#define CLR_SOF (~ISTR_SOF) /* clear Start Of Frame bit */
+#define CLR_ESOF (~ISTR_ESOF) /* clear Expected Start Of Frame bit */
+
+/******************************************************************************/
+/* CNTR control register bits definitions */
+/******************************************************************************/
+#define CNTR_CTRM (0x8000) /* Correct TRansfer Mask */
+#define CNTR_DOVRM (0x4000) /* DMA OVeR/underrun Mask */
+#define CNTR_ERRM (0x2000) /* ERRor Mask */
+#define CNTR_WKUPM (0x1000) /* WaKe UP Mask */
+#define CNTR_SUSPM (0x0800) /* SUSPend Mask */
+#define CNTR_RESETM (0x0400) /* RESET Mask */
+#define CNTR_SOFM (0x0200) /* Start Of Frame Mask */
+#define CNTR_ESOFM (0x0100) /* Expected Start Of Frame Mask */
+
+
+#define CNTR_RESUME (0x0010) /* RESUME request */
+#define CNTR_FSUSP (0x0008) /* Force SUSPend */
+#define CNTR_LPMODE (0x0004) /* Low-power MODE */
+#define CNTR_PDWN (0x0002) /* Power DoWN */
+#define CNTR_FRES (0x0001) /* Force USB RESet */
+
+/******************************************************************************/
+/* FNR Frame Number Register bit definitions */
+/******************************************************************************/
+#define FNR_RXDP (0x8000) /* status of D+ data line */
+#define FNR_RXDM (0x4000) /* status of D- data line */
+#define FNR_LCK (0x2000) /* LoCKed */
+#define FNR_LSOF (0x1800) /* Lost SOF */
+#define FNR_FN (0x07FF) /* Frame Number */
+/******************************************************************************/
+/* DADDR Device ADDRess bit definitions */
+/******************************************************************************/
+#define DADDR_EF (0x80)
+#define DADDR_ADD (0x7F)
+/******************************************************************************/
+/* Endpoint register */
+/******************************************************************************/
+/* bit positions */
+#define EP_CTR_RX (0x8000) /* EndPoint Correct TRansfer RX */
+#define EP_DTOG_RX (0x4000) /* EndPoint Data TOGGLE RX */
+#define EPRX_STAT (0x3000) /* EndPoint RX STATus bit field */
+#define EP_SETUP (0x0800) /* EndPoint SETUP */
+#define EP_T_FIELD (0x0600) /* EndPoint TYPE */
+#define EP_KIND (0x0100) /* EndPoint KIND */
+#define EP_CTR_TX (0x0080) /* EndPoint Correct TRansfer TX */
+#define EP_DTOG_TX (0x0040) /* EndPoint Data TOGGLE TX */
+#define EPTX_STAT (0x0030) /* EndPoint TX STATus bit field */
+#define EPADDR_FIELD (0x000F) /* EndPoint ADDRess FIELD */
+
+/* EndPoint REGister MASK (no toggle fields) */
+#define EPREG_MASK (EP_CTR_RX|EP_SETUP|EP_T_FIELD|EP_KIND|EP_CTR_TX|EPADDR_FIELD)
+
+/* EP_TYPE[1:0] EndPoint TYPE */
+#define EP_TYPE_MASK (0x0600) /* EndPoint TYPE Mask */
+#define EP_BULK (0x0000) /* EndPoint BULK */
+#define EP_CONTROL (0x0200) /* EndPoint CONTROL */
+#define EP_ISOCHRONOUS (0x0400) /* EndPoint ISOCHRONOUS */
+#define EP_INTERRUPT (0x0600) /* EndPoint INTERRUPT */
+#define EP_T_MASK (~EP_T_FIELD & EPREG_MASK)
+
+
+/* EP_KIND EndPoint KIND */
+#define EPKIND_MASK (~EP_KIND & EPREG_MASK)
+
+/* STAT_TX[1:0] STATus for TX transfer */
+#define EP_TX_DIS (0x0000) /* EndPoint TX DISabled */
+#define EP_TX_STALL (0x0010) /* EndPoint TX STALLed */
+#define EP_TX_NAK (0x0020) /* EndPoint TX NAKed */
+#define EP_TX_VALID (0x0030) /* EndPoint TX VALID */
+#define EPTX_DTOG1 (0x0010) /* EndPoint TX Data TOGgle bit1 */
+#define EPTX_DTOG2 (0x0020) /* EndPoint TX Data TOGgle bit2 */
+#define EPTX_DTOGMASK (EPTX_STAT|EPREG_MASK)
+
+/* STAT_RX[1:0] STATus for RX transfer */
+#define EP_RX_DIS (0x0000) /* EndPoint RX DISabled */
+#define EP_RX_STALL (0x1000) /* EndPoint RX STALLed */
+#define EP_RX_NAK (0x2000) /* EndPoint RX NAKed */
+#define EP_RX_VALID (0x3000) /* EndPoint RX VALID */
+#define EPRX_DTOG1 (0x1000) /* EndPoint RX Data TOGgle bit1 */
+#define EPRX_DTOG2 (0x2000) /* EndPoint RX Data TOGgle bit1 */
+#define EPRX_DTOGMASK (EPRX_STAT|EPREG_MASK)
+/* Exported macro ------------------------------------------------------------*/
+/* SetCNTR */
+#define _SetCNTR(wRegValue) (*CNTR = (u16)wRegValue)
+
+/* SetISTR */
+#define _SetISTR(wRegValue) (*ISTR = (u16)wRegValue)
+
+/* SetDADDR */
+#define _SetDADDR(wRegValue) (*DADDR = (u16)wRegValue)
+
+/* SetBTABLE */
+#define _SetBTABLE(wRegValue)(*BTABLE = (u16)(wRegValue & 0xFFF8))
+
+/* GetCNTR */
+#define _GetCNTR() ((u16) *CNTR)
+
+/* GetISTR */
+#define _GetISTR() ((u16) *ISTR)
+
+/* GetFNR */
+#define _GetFNR() ((u16) *FNR)
+
+/* GetDADDR */
+#define _GetDADDR() ((u16) *DADDR)
+
+/* GetBTABLE */
+#define _GetBTABLE() ((u16) *BTABLE)
+
+/* SetENDPOINT */
+#define _SetENDPOINT(bEpNum,wRegValue) (*(EP0REG + bEpNum)= \
+ (u16)wRegValue)
+
+/* GetENDPOINT */
+#define _GetENDPOINT(bEpNum) ((u16)(*(EP0REG + bEpNum)))
+
+/*******************************************************************************
+* Macro Name : SetEPType
+* Description : sets the type in the endpoint register(bits EP_TYPE[1:0])
+* Input : bEpNum: Endpoint Number.
+* wType
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPType(bEpNum,wType) (_SetENDPOINT(bEpNum,\
+ ((_GetENDPOINT(bEpNum) & EP_T_MASK) | wType)))
+
+/*******************************************************************************
+* Macro Name : GetEPType
+* Description : gets the type in the endpoint register(bits EP_TYPE[1:0])
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Endpoint Type
+*******************************************************************************/
+#define _GetEPType(bEpNum) (_GetENDPOINT(bEpNum) & EP_T_FIELD)
+
+/*******************************************************************************
+* Macro Name : SetEPTxStatus
+* Description : sets the status for tx transfer (bits STAT_TX[1:0]).
+* Input : bEpNum: Endpoint Number.
+* wState: new state
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPTxStatus(bEpNum,wState) {\
+ register u16 _wRegVal; \
+ _wRegVal = _GetENDPOINT(bEpNum) & EPTX_DTOGMASK;\
+ /* toggle first bit ? */ \
+ if((EPTX_DTOG1 & wState)!= 0) \
+ _wRegVal ^= EPTX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((EPTX_DTOG2 & wState)!= 0) \
+ _wRegVal ^= EPTX_DTOG2; \
+ _SetENDPOINT(bEpNum, _wRegVal); \
+ } /* _SetEPTxStatus */
+
+/*******************************************************************************
+* Macro Name : SetEPRxStatus
+* Description : sets the status for rx transfer (bits STAT_TX[1:0])
+* Input : bEpNum: Endpoint Number.
+* wState: new state.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPRxStatus(bEpNum,wState) {\
+ register u16 _wRegVal; \
+ \
+ _wRegVal = _GetENDPOINT(bEpNum) & EPRX_DTOGMASK;\
+ /* toggle first bit ? */ \
+ if((EPRX_DTOG1 & wState)!= 0) \
+ _wRegVal ^= EPRX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((EPRX_DTOG2 & wState)!= 0) \
+ _wRegVal ^= EPRX_DTOG2; \
+ _SetENDPOINT(bEpNum, _wRegVal); \
+ } /* _SetEPRxStatus */
+/*******************************************************************************
+* Macro Name : GetEPTxStatus / GetEPRxStatus
+* Description : gets the status for tx/rx transfer (bits STAT_TX[1:0]
+* /STAT_RX[1:0])
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : status .
+*******************************************************************************/
+#define _GetEPTxStatus(bEpNum) ((u16)_GetENDPOINT(bEpNum) & EPTX_STAT)
+
+#define _GetEPRxStatus(bEpNum) ((u16)_GetENDPOINT(bEpNum) & EPRX_STAT)
+
+/*******************************************************************************
+* Macro Name : SetEPTxValid / SetEPRxValid
+* Description : sets directly the VALID tx/rx-status into the enpoint register
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPTxValid(bEpNum) (_SetEPTxStatus(bEpNum, EP_TX_VALID))
+
+#define _SetEPRxValid(bEpNum) (_SetEPRxStatus(bEpNum, EP_RX_VALID))
+
+/*******************************************************************************
+* Macro Name : GetTxStallStatus / GetRxStallStatus.
+* Description : checks stall condition in an endpoint.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : TRUE = endpoint in stall condition.
+*******************************************************************************/
+#define _GetTxStallStatus(bEpNum) (_GetEPTxStatus(bEpNum) \
+ == EP_TX_STALL)
+#define _GetRxStallStatus(bEpNum) (_GetEPRxStatus(bEpNum) \
+ == EP_RX_STALL)
+
+/*******************************************************************************
+* Macro Name : SetEP_KIND / ClearEP_KIND.
+* Description : set & clear EP_KIND bit.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEP_KIND(bEpNum) (_SetENDPOINT(bEpNum, \
+ (_GetENDPOINT(bEpNum) | EP_KIND) & EPREG_MASK))
+#define _ClearEP_KIND(bEpNum) (_SetENDPOINT(bEpNum, \
+ (_GetENDPOINT(bEpNum) & EPKIND_MASK)))
+
+/*******************************************************************************
+* Macro Name : Set_Status_Out / Clear_Status_Out.
+* Description : Sets/clears directly STATUS_OUT bit in the endpoint register.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _Set_Status_Out(bEpNum) _SetEP_KIND(bEpNum)
+#define _Clear_Status_Out(bEpNum) _ClearEP_KIND(bEpNum)
+
+/*******************************************************************************
+* Macro Name : SetEPDoubleBuff / ClearEPDoubleBuff.
+* Description : Sets/clears directly EP_KIND bit in the endpoint register.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPDoubleBuff(bEpNum) _SetEP_KIND(bEpNum)
+#define _ClearEPDoubleBuff(bEpNum) _ClearEP_KIND(bEpNum)
+
+/*******************************************************************************
+* Macro Name : ClearEP_CTR_RX / ClearEP_CTR_TX.
+* Description : Clears bit CTR_RX / CTR_TX in the endpoint register.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _ClearEP_CTR_RX(bEpNum) (_SetENDPOINT(bEpNum,\
+ _GetENDPOINT(bEpNum) & 0x7FFF & EPREG_MASK))
+#define _ClearEP_CTR_TX(bEpNum) (_SetENDPOINT(bEpNum,\
+ _GetENDPOINT(bEpNum) & 0xFF7F & EPREG_MASK))
+
+/*******************************************************************************
+* Macro Name : ToggleDTOG_RX / ToggleDTOG_TX .
+* Description : Toggles DTOG_RX / DTOG_TX bit in the endpoint register.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _ToggleDTOG_RX(bEpNum) (_SetENDPOINT(bEpNum, \
+ EP_DTOG_RX | _GetENDPOINT(bEpNum) & EPREG_MASK))
+#define _ToggleDTOG_TX(bEpNum) (_SetENDPOINT(bEpNum, \
+ EP_DTOG_TX | _GetENDPOINT(bEpNum) & EPREG_MASK))
+
+/*******************************************************************************
+* Macro Name : ClearDTOG_RX / ClearDTOG_TX.
+* Description : Clears DTOG_RX / DTOG_TX bit in the endpoint register.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _ClearDTOG_RX(bEpNum) if((_GetENDPOINT(bEpNum) & EP_DTOG_RX) != 0)\
+ _ToggleDTOG_RX(bEpNum)
+#define _ClearDTOG_TX(bEpNum) if((_GetENDPOINT(bEpNum) & EP_DTOG_TX) != 0)\
+ _ToggleDTOG_TX(bEpNum)
+/*******************************************************************************
+* Macro Name : SetEPAddress.
+* Description : Sets address in an endpoint register.
+* Input : bEpNum: Endpoint Number.
+* bAddr: Address.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPAddress(bEpNum,bAddr) _SetENDPOINT(bEpNum,\
+ _GetENDPOINT(bEpNum) & EPREG_MASK | bAddr)
+
+/*******************************************************************************
+* Macro Name : GetEPAddress.
+* Description : Gets address in an endpoint register.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _GetEPAddress(bEpNum) ((u8)(_GetENDPOINT(bEpNum) & EPADDR_FIELD))
+
+#define _pEPTxAddr(bEpNum) ((u32 *)((_GetBTABLE()+bEpNum*8 )*2 + PMAAddr))
+#define _pEPTxCount(bEpNum) ((u32 *)((_GetBTABLE()+bEpNum*8+2)*2 + PMAAddr))
+#define _pEPRxAddr(bEpNum) ((u32 *)((_GetBTABLE()+bEpNum*8+4)*2 + PMAAddr))
+#define _pEPRxCount(bEpNum) ((u32 *)((_GetBTABLE()+bEpNum*8+6)*2 + PMAAddr))
+
+/*******************************************************************************
+* Macro Name : SetEPTxAddr / SetEPRxAddr.
+* Description : sets address of the tx/rx buffer.
+* Input : bEpNum: Endpoint Number.
+* wAddr: address to be set (must be word aligned).
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPTxAddr(bEpNum,wAddr) (*_pEPTxAddr(bEpNum) = ((wAddr >> 1) << 1))
+#define _SetEPRxAddr(bEpNum,wAddr) (*_pEPRxAddr(bEpNum) = ((wAddr >> 1) << 1))
+
+/*******************************************************************************
+* Macro Name : GetEPTxAddr / GetEPRxAddr.
+* Description : Gets address of the tx/rx buffer.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : address of the buffer.
+*******************************************************************************/
+#define _GetEPTxAddr(bEpNum) ((u16)*_pEPTxAddr(bEpNum))
+#define _GetEPRxAddr(bEpNum) ((u16)*_pEPRxAddr(bEpNum))
+
+/*******************************************************************************
+* Macro Name : SetEPCountRxReg.
+* Description : Sets counter of rx buffer with no. of blocks.
+* Input : pdwReg: pointer to counter.
+* wCount: Counter.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _BlocksOf32(dwReg,wCount,wNBlocks) {\
+ wNBlocks = wCount >> 5;\
+ if((wCount & 0x1f) == 0)\
+ wNBlocks--;\
+ *pdwReg = (u32)((wNBlocks << 10) | 0x8000);\
+ }/* _BlocksOf32 */
+
+#define _BlocksOf2(dwReg,wCount,wNBlocks) {\
+ wNBlocks = wCount >> 1;\
+ if((wCount & 0x1) != 0)\
+ wNBlocks++;\
+ *pdwReg = (u32)(wNBlocks << 10);\
+ }/* _BlocksOf2 */
+
+#define _SetEPCountRxReg(dwReg,wCount) {\
+ u16 wNBlocks;\
+ if(wCount > 62){_BlocksOf32(dwReg,wCount,wNBlocks);}\
+ else {_BlocksOf2(dwReg,wCount,wNBlocks);}\
+ }/* _SetEPCountRxReg */
+
+
+
+#define _SetEPRxDblBuf0Count(bEpNum,wCount) {\
+ u32 *pdwReg = _pEPTxCount(bEpNum); \
+ _SetEPCountRxReg(pdwReg, wCount);\
+ }
+/*******************************************************************************
+* Macro Name : SetEPTxCount / SetEPRxCount.
+* Description : sets counter for the tx/rx buffer.
+* Input : bEpNum: endpoint number.
+* wCount: Counter value.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPTxCount(bEpNum,wCount) (*_pEPTxCount(bEpNum) = wCount)
+#define _SetEPRxCount(bEpNum,wCount) {\
+ u32 *pdwReg = _pEPRxCount(bEpNum); \
+ _SetEPCountRxReg(pdwReg, wCount);\
+ }
+/*******************************************************************************
+* Macro Name : GetEPTxCount / GetEPRxCount.
+* Description : gets counter of the tx buffer.
+* Input : bEpNum: endpoint number.
+* Output : None.
+* Return : Counter value.
+*******************************************************************************/
+#define _GetEPTxCount(bEpNum)((u16)(*_pEPTxCount(bEpNum)) & 0x3ff)
+#define _GetEPRxCount(bEpNum)((u16)(*_pEPRxCount(bEpNum)) & 0x3ff)
+
+/*******************************************************************************
+* Macro Name : SetEPDblBuf0Addr / SetEPDblBuf1Addr.
+* Description : Sets buffer 0/1 address in a double buffer endpoint.
+* Input : bEpNum: endpoint number.
+* : wBuf0Addr: buffer 0 address.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPDblBuf0Addr(bEpNum,wBuf0Addr) {_SetEPTxAddr(bEpNum, wBuf0Addr);}
+#define _SetEPDblBuf1Addr(bEpNum,wBuf1Addr) {_SetEPRxAddr(bEpNum, wBuf1Addr);}
+
+/*******************************************************************************
+* Macro Name : SetEPDblBuffAddr.
+* Description : Sets addresses in a double buffer endpoint.
+* Input : bEpNum: endpoint number.
+* : wBuf0Addr: buffer 0 address.
+* : wBuf1Addr = buffer 1 address.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPDblBuffAddr(bEpNum,wBuf0Addr,wBuf1Addr) { \
+ _SetEPDblBuf0Addr(bEpNum, wBuf0Addr);\
+ _SetEPDblBuf1Addr(bEpNum, wBuf1Addr);\
+ } /* _SetEPDblBuffAddr */
+
+/*******************************************************************************
+* Macro Name : GetEPDblBuf0Addr / GetEPDblBuf1Addr.
+* Description : Gets buffer 0/1 address of a double buffer endpoint.
+* Input : bEpNum: endpoint number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _GetEPDblBuf0Addr(bEpNum) (_GetEPTxAddr(bEpNum))
+#define _GetEPDblBuf1Addr(bEpNum) (_GetEPRxAddr(bEpNum))
+
+/*******************************************************************************
+* Macro Name : SetEPDblBuffCount / SetEPDblBuf0Count / SetEPDblBuf1Count.
+* Description : Gets buffer 0/1 address of a double buffer endpoint.
+* Input : bEpNum: endpoint number.
+* : bDir: endpoint dir EP_DBUF_OUT = OUT
+* EP_DBUF_IN = IN
+* : wCount: Counter value
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPDblBuf0Count(bEpNum, bDir, wCount) { \
+ if(bDir == EP_DBUF_OUT)\
+ /* OUT endpoint */ \
+ {_SetEPRxDblBuf0Count(bEpNum,wCount);} \
+ else if(bDir == EP_DBUF_IN)\
+ /* IN endpoint */ \
+ *_pEPTxCount(bEpNum) = (u32)wCount; \
+ } /* SetEPDblBuf0Count*/
+
+#define _SetEPDblBuf1Count(bEpNum, bDir, wCount) { \
+ if(bDir == EP_DBUF_OUT)\
+ /* OUT endpoint */ \
+ {_SetEPRxCount(bEpNum,wCount);}\
+ else if(bDir == EP_DBUF_IN)\
+ /* IN endpoint */\
+ *_pEPRxCount(bEpNum) = (u32)wCount; \
+ } /* SetEPDblBuf1Count */
+
+#define _SetEPDblBuffCount(bEpNum, bDir, wCount) {\
+ _SetEPDblBuf0Count(bEpNum, bDir, wCount); \
+ _SetEPDblBuf1Count(bEpNum, bDir, wCount); \
+ } /* _SetEPDblBuffCount */
+
+/*******************************************************************************
+* Macro Name : GetEPDblBuf0Count / GetEPDblBuf1Count.
+* Description : Gets buffer 0/1 rx/tx counter for double buffering.
+* Input : bEpNum: endpoint number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _GetEPDblBuf0Count(bEpNum) (_GetEPTxCount(bEpNum))
+#define _GetEPDblBuf1Count(bEpNum) (_GetEPRxCount(bEpNum))
+
+
+/* External variables --------------------------------------------------------*/
+extern volatile u16 wIstr; /* ISTR register last read value */
+
+/* Exported functions ------------------------------------------------------- */
+void SetCNTR(u16 /*wRegValue*/);
+void SetISTR(u16 /*wRegValue*/);
+void SetDADDR(u16 /*wRegValue*/);
+void SetBTABLE(u16 /*wRegValue*/);
+u16 GetCNTR(void);
+u16 GetISTR(void);
+u16 GetFNR(void);
+u16 GetDADDR(void);
+u16 GetBTABLE(void);
+void SetENDPOINT(u8 /*bEpNum*/, u16 /*wRegValue*/);
+u16 GetENDPOINT(u8 /*bEpNum*/);
+void SetEPType(u8 /*bEpNum*/, u16 /*wType*/);
+u16 GetEPType(u8 /*bEpNum*/);
+void SetEPTxStatus(u8 /*bEpNum*/, u16 /*wState*/);
+void SetEPRxStatus(u8 /*bEpNum*/, u16 /*wState*/);
+void SetDouBleBuffEPStall(u8 /*bEpNum*/, u8 bDir);
+u16 GetEPTxStatus(u8 /*bEpNum*/);
+u16 GetEPRxStatus(u8 /*bEpNum*/);
+void SetEPTxValid(u8 /*bEpNum*/);
+void SetEPRxValid(u8 /*bEpNum*/);
+u16 GetTxStallStatus(u8 /*bEpNum*/);
+u16 GetRxStallStatus(u8 /*bEpNum*/);
+void SetEP_KIND(u8 /*bEpNum*/);
+void ClearEP_KIND(u8 /*bEpNum*/);
+void Set_Status_Out(u8 /*bEpNum*/);
+void Clear_Status_Out(u8 /*bEpNum*/);
+void SetEPDoubleBuff(u8 /*bEpNum*/);
+void ClearEPDoubleBuff(u8 /*bEpNum*/);
+void ClearEP_CTR_RX(u8 /*bEpNum*/);
+void ClearEP_CTR_TX(u8 /*bEpNum*/);
+void ToggleDTOG_RX(u8 /*bEpNum*/);
+void ToggleDTOG_TX(u8 /*bEpNum*/);
+void ClearDTOG_RX(u8 /*bEpNum*/);
+void ClearDTOG_TX(u8 /*bEpNum*/);
+void SetEPAddress(u8 /*bEpNum*/, u8 /*bAddr*/);
+u8 GetEPAddress(u8 /*bEpNum*/);
+void SetEPTxAddr(u8 /*bEpNum*/, u16 /*wAddr*/);
+void SetEPRxAddr(u8 /*bEpNum*/, u16 /*wAddr*/);
+u16 GetEPTxAddr(u8 /*bEpNum*/);
+u16 GetEPRxAddr(u8 /*bEpNum*/);
+void SetEPCountRxReg(u32 * /*pdwReg*/, u16 /*wCount*/);
+void SetEPTxCount(u8 /*bEpNum*/, u16 /*wCount*/);
+void SetEPRxCount(u8 /*bEpNum*/, u16 /*wCount*/);
+u16 GetEPTxCount(u8 /*bEpNum*/);
+u16 GetEPRxCount(u8 /*bEpNum*/);
+void SetEPDblBuf0Addr(u8 /*bEpNum*/, u16 /*wBuf0Addr*/);
+void SetEPDblBuf1Addr(u8 /*bEpNum*/, u16 /*wBuf1Addr*/);
+void SetEPDblBuffAddr(u8 /*bEpNum*/, u16 /*wBuf0Addr*/, u16 /*wBuf1Addr*/);
+u16 GetEPDblBuf0Addr(u8 /*bEpNum*/);
+u16 GetEPDblBuf1Addr(u8 /*bEpNum*/);
+void SetEPDblBuffCount(u8 /*bEpNum*/, u8 /*bDir*/, u16 /*wCount*/);
+void SetEPDblBuf0Count(u8 /*bEpNum*/, u8 /*bDir*/, u16 /*wCount*/);
+void SetEPDblBuf1Count(u8 /*bEpNum*/, u8 /*bDir*/, u16 /*wCount*/);
+u16 GetEPDblBuf0Count(u8 /*bEpNum*/);
+u16 GetEPDblBuf1Count(u8 /*bEpNum*/);
+EP_DBUF_DIR GetEPDblBufDir(u8 /*bEpNum*/);
+void FreeUserBuffer(u8 bEpNum/*bEpNum*/, u8 bDir);
+u16 ToWord(u8, u8);
+u16 ByteSwap(u16);
+
+#endif /* __USB_REGS_H */
+
+/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
diff --git a/core/usb/usb_lib/usb_type.h b/core/usb/usb_lib/usb_type.h new file mode 100644 index 0000000..9e428b9 --- /dev/null +++ b/core/usb/usb_lib/usb_type.h @@ -0,0 +1,72 @@ +/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name : usb_type.h
+* Author : MCD Application Team
+* Version : V2.2.1
+* Date : 09/22/2008
+* Description : Type definitions used by the USB Library
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_TYPE_H
+#define __USB_TYPE_H
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+#ifndef NULL
+#define NULL ((void *)0)
+#endif
+
+#ifndef __STM32F10x_TYPE_H
+
+typedef signed long s32;
+typedef signed short s16;
+typedef signed char s8;
+
+typedef volatile signed long vs32;
+typedef volatile signed short vs16;
+typedef volatile signed char vs8;
+
+typedef unsigned long u32;
+typedef unsigned short u16;
+typedef unsigned char u8;
+
+typedef unsigned long const uc32; /* Read Only */
+typedef unsigned short const uc16; /* Read Only */
+typedef unsigned char const uc8; /* Read Only */
+
+typedef volatile unsigned long vu32;
+typedef volatile unsigned short vu16;
+typedef volatile unsigned char vu8;
+
+typedef volatile unsigned long const vuc32; /* Read Only */
+typedef volatile unsigned short const vuc16; /* Read Only */
+typedef volatile unsigned char const vuc8; /* Read Only */
+
+
+typedef enum
+{
+ FALSE = 0, TRUE = !FALSE
+}
+bool;
+
+typedef enum { RESET = 0, SET = !RESET } FlagStatus, ITStatus;
+
+typedef enum { DISABLE = 0, ENABLE = !DISABLE} FunctionalState;
+
+typedef enum { ERROR = 0, SUCCESS = !ERROR} ErrorStatus;
+#endif
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+/* External variables --------------------------------------------------------*/
+
+#endif /* __USB_TYPE_H */
+
+/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
|