20 files changed, 420 insertions, 352 deletions

diff --git a/Makefile b/Makefile
index 149f54a..01e1e72 100644
--- a/Makefile
+++ b/Makefile
@@ -153,7 +153,7 @@ debug:
 
 cscope:
 	rm -rf *.cscope
-	find . -name '*.[hcs]' -o -name '*.cpp' | xargs cscope -b
+	find . -name '*.[hcS]' -o -name '*.cpp' | xargs cscope -b
 
 tags:
 	etags `find . -name "*.c" -o -name "*.cpp" -o -name "*.h"`
diff --git a/docs/source/conf.py b/docs/source/conf.py
index 1ad4e57..f232b7c 100644
--- a/docs/source/conf.py
+++ b/docs/source/conf.py
@@ -117,25 +117,25 @@ html_theme = 'default'
 # further.  For a list of options available for each theme, see the
 # documentation.
 html_theme_options = {
-	## Sidebar placement options
-	#'stickysidebar' : 'true',
-	'rightsidebar' : 'true',
-	#'collapsiblesidebar' : 'true',
-	
-	## Color
-	'sidebarbgcolor' : '#C8C8C8',
-	'sidebarlinkcolor' : 'green',
-	'sidebartextcolor' : 'black',
+        ## Sidebar placement options
+        #'stickysidebar' : 'true',
+        'rightsidebar' : 'true',
+        #'collapsiblesidebar' : 'true',
+
+        ## Color
+        'sidebarbgcolor' : '#C8C8C8',
+        'sidebarlinkcolor' : 'green',
+        'sidebartextcolor' : 'black',
         #'sidebarbtncolor' : 'black',
-	'footerbgcolor' : 'green',
-	'relbarbgcolor' : 'green',
-	'headlinkcolor' : '#000000',
-	'linkcolor' : 'green',
-	'visitedlinkcolor' : 'green',
-	
-	## Font
-	'headfont' : 'Georgia',
-	'bodyfont' : 'Lucidia'
+        'footerbgcolor' : 'green',
+        'relbarbgcolor' : 'green',
+        'headlinkcolor' : '#000000',
+        'linkcolor' : 'green',
+        'visitedlinkcolor' : 'green',
+
+        ## Font
+        'headfont' : 'Georgia',
+        'bodyfont' : 'Lucidia'
 }
 
 # Add any paths that contain custom themes here, relative to this directory.
@@ -174,7 +174,7 @@ html_last_updated_fmt = '%b %d, %Y'
 # re-add commented line when custom template for api finished
 html_sidebars = {
    '**': ['globaltoc.html', 'searchbox.html'],
-   #'lang/api**':['searchbox.html', 'apilist.html'], 
+   #'lang/api**':['searchbox.html', 'apilist.html'],
 }
 
 
diff --git a/docs/source/lang/api/serialusb.rst b/docs/source/lang/api/serialusb.rst
index 87fa641..4ddfa4a 100644
--- a/docs/source/lang/api/serialusb.rst
+++ b/docs/source/lang/api/serialusb.rst
@@ -224,7 +224,7 @@ running from battery, or connected but not monitored. You may need to
 experiment with the DTR/RTS logic for your platform and device
 configuration. ::
 
-    #define LED_PIN 13
+    #define LED_PIN BOARD_LED_PIN
 
     void setup() {
         /* Set up the LED to blink  */
@@ -232,22 +232,22 @@ configuration. ::
     }
 
     void loop() {
-        // LED will stay off if we are disconnected;
-        // will blink quickly if USB is unplugged (battery etc)
+        // LED will stay off if we are disconnected, and will blink
+        // quickly if USB is unplugged (battery power, etc.).
         if(SerialUSB.isConnected()) {
             digitalWrite(LED_PIN, 1);
         }
         delay(100);
 
-        // If this logic fails to detect if bytes are going to
-        // be read by the USB host, then the println() will fully
-        // many times, causing a very slow LED blink.
-        // If the characters are printed and read, the blink will
-        // only slow a small amount when "really" connected, and fast
-        // when the virtual port is only configured.
+        // If this logic fails to detect if bytes are going to be read
+        // by the USB host, then the println() take a long time,
+        // causing a very slow LED blink.  If the characters are
+        // printed and read, the blink will only slow a small amount
+        // when "really" connected, and will be fast fast when the
+        // virtual port is only configured.
         if(SerialUSB.isConnected() && (SerialUSB.getDTR() || SerialUSB.getRTS())) {
-            for(int i=0; i<10; i++) {
-               SerialUSB.println(123456,BIN);
+            for(int i = 0; i < 10; i++) {
+               SerialUSB.println(123456, BIN);
             }
         }
         digitalWrite(LED_PIN, 0);
diff --git a/examples/blinky.cpp b/examples/blinky.cpp
index 5611987..209a6e6 100644
--- a/examples/blinky.cpp
+++ b/examples/blinky.cpp
@@ -1,4 +1,4 @@
-// Blinks the LED, pin 13

+// Blinks the built-in LED

 

 #include "wirish.h"

 

@@ -20,8 +20,8 @@ void loop() {
 }

 

 // Force init to be called *first*, i.e. before static object allocation.

-// Otherwise, statically allocated object that need libmaple may fail.

- __attribute__(( constructor )) void premain() {

+// Otherwise, statically allocated objects that need libmaple may fail.

+__attribute__((constructor)) void premain() {

     init();

 }

 

diff --git a/examples/debug-dtrrts.cpp b/examples/debug-dtrrts.cpp
index f9f8b96..61c061a 100644
--- a/examples/debug-dtrrts.cpp
+++ b/examples/debug-dtrrts.cpp
@@ -1,14 +1,12 @@
-// Sample main.cpp file. Blinks an LED, sends a message out USART2
-// and turns on PWM on pin 2
+// Test sketch for figuring out DTR/RTS behavior on different platforms.
 
 #include "wirish.h"
 #include "usb.h"
 
-#define LED_PIN 13
-#define PWM_PIN  2
+#define LED_PIN BOARD_LED_PIN
+#define PWM_PIN 2
 
-void setup()
-{
+void setup() {
     /* Set up the LED to blink  */
     pinMode(LED_PIN, OUTPUT);
 
@@ -18,12 +16,10 @@ void setup()
 
 }
 
-int toggle = 0;
-
 void loop() {
-    toggle ^= 1;
-    digitalWrite(LED_PIN, toggle);
+    toggleLED();
     delay(100);
+
     Serial2.print("DTR: ");
     Serial2.print(usbGetDTR(), DEC);
     Serial2.print("\tRTS: ");
@@ -31,13 +27,12 @@ void loop() {
 }
 
 // Force init to be called *first*, i.e. before static object allocation.
-// Otherwise, statically allocated object that need libmaple may fail.
- __attribute__(( constructor )) void premain() {
+// Otherwise, statically allocated objects that need libmaple may fail.
+__attribute__((constructor)) void premain() {
     init();
 }
 
-int main(void)
-{
+int main(void) {
     setup();
 
     while (1) {
diff --git a/examples/qa-slave-shield.cpp b/examples/qa-slave-shield.cpp
index b395cca..178b780 100644
--- a/examples/qa-slave-shield.cpp
+++ b/examples/qa-slave-shield.cpp
@@ -1,50 +1,51 @@
-// slave mode for QA shield
+// Slave mode for QA shield
 
 #include "wirish.h"
 
-#define LED_PIN 13
-#define NUM_GPIO 38 // not the number of the max...
+// FIXME generalize for Maple Native, Maple Mini (NUM_GPIO, Mini USB
+// breakout pins, etc.)
 
-int i;
+#define LED_PIN BOARD_LED_PIN
+#define NUM_GPIO 38 // Ignore JTAG pins.
 
-void setup()
-{
+void setup() {
     /* Set up the LED to blink  */
     pinMode(LED_PIN, OUTPUT);
-    digitalWrite(LED_PIN, 1);
+    digitalWrite(LED_PIN, HIGH);
 
-    for(i=0; i<NUM_GPIO; i++) {
-        if(i==13) { continue; }
+    for(int i = 0; i < NUM_GPIO; i++) {
+        if (i == BOARD_LED_PIN) {
+            continue;
+        }
         pinMode(i, OUTPUT);
-        digitalWrite(i,0);
+        digitalWrite(i, LOW);
     }
-    //delay(5000);
     SerialUSB.println("OK, starting...");
-
 }
 
 void loop() {
-    digitalWrite(LED_PIN,1);
+    toggleLED();
     delay(100);
-    digitalWrite(LED_PIN,0);
+    toggleLED();
 
-    for(i=0; i<NUM_GPIO; i++) {
-        if(i==13) { continue; }
-        digitalWrite(i,1);
+    for(int i = 0; i < NUM_GPIO; i++) {
+        if (i == BOARD_LED_PIN) {
+            continue;
+        }
+        togglePin(i);
         delay(5);
-        digitalWrite(i,0);
+        togglePin(i);
         delay(5);
     }
 }
 
 // Force init to be called *first*, i.e. before static object allocation.
-// Otherwise, statically allocated object that need libmaple may fail.
- __attribute__(( constructor )) void premain() {
+// Otherwise, statically allocated objects that need libmaple may fail.
+__attribute__((constructor)) void premain() {
     init();
 }
 
-int main(void)
-{
+int main(void) {
     setup();
 
     while (1) {
diff --git a/examples/spi_master.cpp b/examples/spi_master.cpp
index 9f6d81b..06cad02 100644
--- a/examples/spi_master.cpp
+++ b/examples/spi_master.cpp
@@ -60,13 +60,12 @@ void loop() {
 }

 

 // Force init to be called *first*, i.e. before static object allocation.

-// Otherwise, statically allocated object that need libmaple may fail.

- __attribute__(( constructor )) void premain() {

+// Otherwise, statically allocated objects that need libmaple may fail.

+__attribute__((constructor)) void premain() {

     init();

 }

 

-int main(void)

-{

+int main(void) {

     setup();

 

     while (1) {

diff --git a/examples/test-bkp.cpp b/examples/test-bkp.cpp
index d0aa564..f5957b7 100644
--- a/examples/test-bkp.cpp
+++ b/examples/test-bkp.cpp
@@ -1,4 +1,4 @@
-#include <stdio.h>
+#include <stdio.h>              // for snprintf()
 
 #include "wirish.h"
 #include "bkp.h"
diff --git a/examples/test-dac.cpp b/examples/test-dac.cpp
index 62f40eb..af98030 100644
--- a/examples/test-dac.cpp
+++ b/examples/test-dac.cpp
@@ -1,8 +1,4 @@
-

 #include "wirish.h"

-#include "fsmc.h"

-#include "rcc.h"

-#include "gpio.h"

 #include "dac.h"

 

 uint16 count = 0;

diff --git a/examples/test-fsmc.cpp b/examples/test-fsmc.cpp
index f4fd068..4211e4d 100644
--- a/examples/test-fsmc.cpp
+++ b/examples/test-fsmc.cpp
@@ -1,14 +1,12 @@
-

 #include "wirish.h"

 #include "fsmc.h"

 

-#define LED_PIN  23 // hack for maple native

-#define DISC_PIN 14 // hack for USB on native

+#define LED_PIN BOARD_LED_PIN

 

 // System control block registers

 #define SCB_BASE    (SCB_Reg*)(0xE000ED00)

 

-// This stuff should ultimately get moved to util.h or scb.h or w/e. 

+// This stuff should ultimately get moved to util.h or scb.h or w/e.

 // Also in interactive test program and the HardFault IRQ handler.

 typedef struct {

     volatile uint32 CPUID;

@@ -23,15 +21,14 @@ typedef struct {
     volatile uint32 SHCRS;

     volatile uint32 CFSR;

     volatile uint32 HFSR;

-    uint32 pad1;   

+    uint32 pad1;

     volatile uint32 MMAR;

     volatile uint32 BFAR;

 } SCB_Reg;

 

-SCB_Reg *scb; 

+SCB_Reg *scb;

 

 uint16 *ptr;

-int toggle = 0;

 int count = 0;

 

 void setup() {

@@ -39,8 +36,6 @@ void setup() {
    scb = (SCB_Reg*)SCB_BASE;

 

    pinMode(LED_PIN, OUTPUT);

-   pinMode(DISC_PIN, OUTPUT);

-   digitalWrite(DISC_PIN,1);

    digitalWrite(LED_PIN,1);

 

    Serial1.begin(9600);

@@ -82,15 +77,14 @@ void setup() {
    Serial1.print("BFAR:  ");

    id = scb->BFAR;

    Serial1.println(id,BIN);

-    

+

    Serial1.println("Now testing all memory addresses... (will hardfault at the end)");

    delay(3000);

 }

 

 void loop() {

-   digitalWrite(LED_PIN, toggle);

-   toggle ^= 1;

-   delay(1);

+    toggleLED();

+    delay(1);

 

    for(int i = 0; i<100; i++) {   // modify this to speed things up

         count++;

@@ -102,7 +96,7 @@ void loop() {
                 while(1) { }

         }

    }

-   

+

    Serial1.print((uint32)(ptr),HEX);

    Serial1.print(": ");

    Serial1.println(*ptr,BIN);

diff --git a/examples/test-serial-flush.cpp b/examples/test-serial-flush.cpp
index d7fbf7a..1cd82b6 100644
--- a/examples/test-serial-flush.cpp
+++ b/examples/test-serial-flush.cpp
@@ -2,22 +2,13 @@
 
 #include "wirish.h"
 
-void setup()
-{
+void setup() {
     /* Send a message out USART2  */
     Serial2.begin(9600);
     Serial2.println("Hello world!");
 }
 
-int toggle = 0;
-
 void loop() {
-
-    Serial2.println("This is the first line.");
-    Serial2.end();
-    Serial2.println("This is the second line.");
-
-    Serial2.begin(9600);
     Serial2.println("Waiting for multiple input...");
     while(Serial2.available() < 5) { }
     Serial2.println(Serial2.read());
@@ -29,13 +20,12 @@ void loop() {
 }
 
 // Force init to be called *first*, i.e. before static object allocation.
-// Otherwise, statically allocated object that need libmaple may fail.
- __attribute__(( constructor )) void premain() {
+// Otherwise, statically allocated objects that need libmaple may fail.
+__attribute__((constructor)) void premain() {
     init();
 }
 
-int main(void)
-{
+int main(void) {
     setup();
 
     while (1) {
diff --git a/examples/test-serialusb.cpp b/examples/test-serialusb.cpp
index 9d0a862..678c2b9 100644
--- a/examples/test-serialusb.cpp
+++ b/examples/test-serialusb.cpp
@@ -1,11 +1,10 @@
-// Sample main.cpp file. Blinks an LED, sends a message out USART2
-// and turns on PWM on pin 2
+// Tests SerialUSB functionality.
 
 #include "wirish.h"
 #include "usb.h"
 
-#define LED_PIN 13
-#define BUT_PIN 38
+#define LED_PIN BOARD_LED_PIN
+#define BUT_PIN BOARD_BUTTON_PIN
 
 uint32 state = 0;
 #define QUICKPRINT  0
@@ -14,33 +13,29 @@ uint32 state = 0;
 #define SIMPLE      3
 #define ONOFF       4
 
-
-void setup()
-{
+void setup() {
     /* Set up the LED to blink  */
     pinMode(LED_PIN, OUTPUT);
 
     /* Set up the Button */
-    pinMode(BUT_PIN, INPUT_PULLUP);
+    pinMode(BUT_PIN, INPUT);
 
     Serial2.begin(9600);
-    Serial2.println("Hello world! This is the debug channel.");
-}
+    Serial2.println("This is the debug channel. Press BUT.");
 
-int toggle = 0;
+    waitForButtonPress(0);
+}
 
 uint8 c1 = '-';
 
 void loop() {
-    toggle ^= 1;
-    digitalWrite(LED_PIN, toggle);
+    toggleLED();
     delay(1000);
 
-    if(digitalRead(BUT_PIN)) {
-        while(digitalRead(BUT_PIN)) {};
+    if(isButtonPressed()) {
         state++;
     }
-    
+
     switch(state) {
         case QUICKPRINT:
             for(int i = 0; i<30; i++) {
@@ -48,34 +43,34 @@ void loop() {
                 SerialUSB.print('.');
                 SerialUSB.print('|');
             }
-            Serial2.println(SerialUSB.pending(),DEC);
+            Serial2.println(SerialUSB.pending(), DEC);
             SerialUSB.println();
             break;
         case BIGSTUFF:
-            SerialUSB.println("01234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890");
-            SerialUSB.println((uint32)123456789,DEC);
+            SerialUSB.println("0123456789012345678901234567890123456789"
+                              "0123456789012345678901234567890123456789"
+                              "012345678901234567890");
+            SerialUSB.println((int64)123456789, DEC);
             SerialUSB.println(3.1415926535);
-            Serial2.println(SerialUSB.pending(),DEC);
+            Serial2.println(SerialUSB.pending(), DEC);
             break;
         case NUMBERS:
             SerialUSB.println("Numbers! -----------------------------");
             Serial2.println("Numbers! -----------------------------");
             SerialUSB.println('1');
             Serial2.println('1');
-            SerialUSB.println(1,DEC);
-            Serial2.println(1,DEC);
-            SerialUSB.println(-1,DEC);
-            Serial2.println(-1,DEC);
+            SerialUSB.println(1, DEC);
+            Serial2.println(1, DEC);
+            SerialUSB.println(-1, DEC);
+            Serial2.println(-1, DEC);
             SerialUSB.println(3.14159265);
             Serial2.println(3.14159265);
-            SerialUSB.println(3.14159265,9);
-            Serial2.println(3.14159265,9);
-            SerialUSB.println(123456789,DEC);
-            Serial2.println(123456789,DEC);
-            SerialUSB.println(-123456789,DEC);
-            Serial2.println(-123456789,DEC);
-            SerialUSB.println(65535,HEX);
-            Serial2.println(65535,HEX);
+            SerialUSB.println(123456789, DEC);
+            Serial2.println(123456789, DEC);
+            SerialUSB.println(-123456789, DEC);
+            Serial2.println(-123456789, DEC);
+            SerialUSB.println(65535, HEX);
+            Serial2.println(65535, HEX);
             break;
         case SIMPLE:
             Serial2.println("Trying write('a')");
@@ -92,8 +87,8 @@ void loop() {
             SerialUSB.print("hij\n\r");
             SerialUSB.write(' ');
             SerialUSB.println();
-            Serial2.println("Trying println(123456789,DEC)");
-            SerialUSB.println(123456789);
+            Serial2.println("Trying println(123456789, DEC)");
+            SerialUSB.println(123456789, DEC);
             Serial2.println("Trying println(3.141592)");
             SerialUSB.println(3.141592);
             Serial2.println("Trying println(\"DONE\")");
@@ -103,12 +98,12 @@ void loop() {
             Serial2.println("Shutting down...");
             SerialUSB.println("Shutting down...");
             SerialUSB.end();
-            Serial2.println("Waiting 4seconds...");
+            Serial2.println("Waiting 4 seconds...");
             delay(4000);
             Serial2.println("Starting up...");
             SerialUSB.begin();
             SerialUSB.println("Hello World!");
-            Serial2.println("Waiting 4seconds...");
+            Serial2.println("Waiting 4 seconds...");
             delay(4000);
             state++;
             break;
@@ -118,13 +113,12 @@ void loop() {
 }
 
 // Force init to be called *first*, i.e. before static object allocation.
-// Otherwise, statically allocated object that need libmaple may fail.
- __attribute__(( constructor )) void premain() {
+// Otherwise, statically allocated objects that need libmaple may fail.
+__attribute__((constructor)) void premain() {
     init();
 }
 
-int main(void)
-{
+int main(void) {
     setup();
 
     while (1) {
diff --git a/examples/test-systick.cpp b/examples/test-systick.cpp
index 247892d..c7b5529 100644
--- a/examples/test-systick.cpp
+++ b/examples/test-systick.cpp
@@ -3,54 +3,48 @@
 #include "wirish.h"
 #include "systick.h"
 
-#define LED_PIN 13
-#define PWM_PIN  2
-#define BUT     38
+#define LED_PIN BOARD_LED_PIN
+#define PWM_PIN 2
+#define BUT     BOARD_BUTTON_PIN
 
-void setup()
-{
+void setup() {
     /* Set up the LED to blink  */
     pinMode(LED_PIN, OUTPUT);
-
-    /* Turn on PWM on pin PWM_PIN */
-    pinMode(PWM_PIN, PWM);
-    pwmWrite(PWM_PIN, 0x8000);
-
-    pinMode(BUT, INPUT_PULLDOWN);
+    pinMode(BUT, INPUT);
 }
 
-int toggle = 0;
+bool disable = true;
 long time = 0;
 
 void loop() {
-    toggle ^= 1;
-    digitalWrite(LED_PIN, toggle);
+    volatile int i = 0;
+    toggleLED();
 
     // An artificial delay
-    int16 i = 1;
-    float j = 1;
-    for(i=0; i<6553; i++) {
-        j = sqrt(j) + 1; 
-    }
-        
-    if(digitalRead(BUT)) {
-        systick_disable();
-    } else {
-        systick_resume();
+    for(i = 0; i < 150000; i++)
+        ;
+
+    if(isButtonPressed()) {
+        if (disable) {
+            systick_disable();
+            SerialUSB.println("Disabling SysTick");
+        } else {
+            SerialUSB.println("Re-enabling SysTick");
+            systick_resume();
+        }
+        disable = !disable;
     }
 
-    //SerialUSB.println(micros());      // there is a bug with this
     SerialUSB.println(millis());
 }
 
 // Force init to be called *first*, i.e. before static object allocation.
 // Otherwise, statically allocated object that need libmaple may fail.
- __attribute__(( constructor )) void premain() {
+__attribute__((constructor)) void premain() {
     init();
 }
 
-int main(void)
-{
+int main(void) {
     setup();
 
     while (1) {
diff --git a/examples/test-timers.cpp b/examples/test-timers.cpp
index ccba251..f3cfdcc 100644
--- a/examples/test-timers.cpp
+++ b/examples/test-timers.cpp
@@ -2,7 +2,7 @@
 
 #include "wirish.h"
 
-#define LED_PIN 13
+#define LED_PIN BOARD_LED_PIN
 
 void handler1(void);
 void handler2(void);
@@ -12,7 +12,6 @@ void handler4(void);
 void handler3b(void);
 void handler4b(void);
 
-int toggle = 0;
 int t;
 
 int count1 = 0;
@@ -36,25 +35,24 @@ void setup()
     pinMode(LED_PIN, OUTPUT);
 
     // Setup the button as input
-    pinMode(38, INPUT_PULLUP);
+    pinMode(BOARD_BUTTON_PIN, INPUT);
 
-    /* Send a message out USART2  */
-    //SerialUSB.begin(9600);
-    SerialUSB.println("Begining timer test...");
+    // Wait for user to attach...
+    waitForButtonPress(0);
+
+    // Send a message out SerialUSB
+    SerialUSB.println("Beginning timer test...");
     for(int t=0; t<4; t++) {
         Timers[t].setChannel1Mode(TIMER_OUTPUTCOMPARE);
         Timers[t].setChannel2Mode(TIMER_OUTPUTCOMPARE);
         Timers[t].setChannel3Mode(TIMER_OUTPUTCOMPARE);
         Timers[t].setChannel4Mode(TIMER_OUTPUTCOMPARE);
     }
-    
-    // Wait for user to attach...
-    delay(2000);
 }
 
 void loop() {
     SerialUSB.println("-----------------------------------------------------");
-    SerialUSB.println("Testing setCount/getCount"); 
+    SerialUSB.println("Testing setCount/getCount");
     SerialUSB.print("Timer1.getCount() = "); SerialUSB.println(Timer1.getCount());
     SerialUSB.println("Timer1.setCount(1234)");
     Timer1.setCount(1234);
@@ -63,7 +61,7 @@ void loop() {
     // down Timer4 is in the "pause" state and the timer doesn't increment, so
     // the final counts should reflect the ratio of time that BUT was held down
     SerialUSB.println("-----------------------------------------------------");
-    SerialUSB.println("Testing Pause/Resume; button roughly controls Timer4"); 
+    SerialUSB.println("Testing Pause/Resume; button roughly controls Timer4");
     count3 = 0;
     count4 = 0;
     Timer3.setChannel1Mode(TIMER_OUTPUTCOMPARE);
@@ -80,9 +78,9 @@ void loop() {
     Timer4.attachCompare1Interrupt(handler4b);
     Timer3.resume();
     Timer4.resume();
-    SerialUSB.println("~4 seconds..."); 
+    SerialUSB.println("~4 seconds...");
     for(int i = 0; i<4000; i++) {
-        if(digitalRead(38)) {
+        if(isButtonPressed()) {
             Timer4.pause();
         } else {
             Timer4.resume();
@@ -96,14 +94,14 @@ void loop() {
 
     // These test the setPeriod auto-configure functionality
     SerialUSB.println("-----------------------------------------------------");
-    SerialUSB.println("Testing setPeriod"); 
+    SerialUSB.println("Testing setPeriod");
     Timer4.setChannel1Mode(TIMER_OUTPUTCOMPARE);
     Timer4.setCompare1(1);
-    Timer4.setPeriod(10); 
+    Timer4.setPeriod(10);
     Timer4.pause();
     Timer4.setCount(0);
     Timer4.attachCompare1Interrupt(handler4b);
-    SerialUSB.println("Period 10ms, wait 2 seconds..."); 
+    SerialUSB.println("Period 10ms, wait 2 seconds...");
     count4 = 0;
     Timer4.resume();
     delay(2000);
@@ -114,10 +112,10 @@ void loop() {
     Timer4.setChannel1Mode(TIMER_OUTPUTCOMPARE);
     Timer4.setCompare1(1);
     Timer4.pause();
-    Timer4.setPeriod(30000); 
+    Timer4.setPeriod(30000);
     Timer4.setCount(0);
     Timer4.attachCompare1Interrupt(handler4b);
-    SerialUSB.println("Period 30000ms, wait 2 seconds..."); 
+    SerialUSB.println("Period 30000ms, wait 2 seconds...");
     count4 = 0;
     Timer4.resume();
     delay(2000);
@@ -127,12 +125,12 @@ void loop() {
     SerialUSB.println("(should be around 2sec/30000ms ~ 67)");
 
     Timer4.setChannel1Mode(TIMER_OUTPUTCOMPARE);
-    Timer4.setPeriod(300000); 
+    Timer4.setPeriod(300000);
     Timer4.setCompare1(1);
     Timer4.pause();
     Timer4.setCount(0);
     Timer4.attachCompare1Interrupt(handler4b);
-    SerialUSB.println("Period 300000ms, wait 2 seconds..."); 
+    SerialUSB.println("Period 300000ms, wait 2 seconds...");
     count4 = 0;
     Timer4.resume();
     delay(2000);
@@ -146,9 +144,9 @@ void loop() {
     Timer4.setOverflow(65454);
     Timer4.pause();
     Timer4.setCount(0);
-    Timer4.setCompare1(1); 
+    Timer4.setCompare1(1);
     Timer4.attachCompare1Interrupt(handler4b);
-    SerialUSB.println("Period 30000ms, wait 2 seconds..."); 
+    SerialUSB.println("Period 30000ms, wait 2 seconds...");
     count4 = 0;
     Timer4.resume();
     delay(2000);
@@ -159,11 +157,11 @@ void loop() {
 
     Timer4.setChannel1Mode(TIMER_OUTPUTCOMPARE);
     Timer4.setCompare1(1);
-    Timer4.setPeriod(30000); 
+    Timer4.setPeriod(30000);
     Timer4.pause();
     Timer4.setCount(0);
     Timer4.attachCompare1Interrupt(handler4b);
-    SerialUSB.println("Period 30000ms, wait 2 seconds..."); 
+    SerialUSB.println("Period 30000ms, wait 2 seconds...");
     count4 = 0;
     Timer4.resume();
     delay(2000);
@@ -177,7 +175,7 @@ void loop() {
     // that over time the actual timing rates get blown away by other system
     // interrupts.
     for(t=0; t<4; t++) {
-        toggle ^= 1; digitalWrite(LED_PIN, toggle);
+        toggleLED();
         delay(100);
         SerialUSB.println("-----------------------------------------------------");
         SerialUSB.print("Testing Timer "); SerialUSB.println(t+1);
@@ -214,33 +212,39 @@ void handler1(void) {
     val1 += rate1;
     Timers[t].setCompare1(val1);
     count1++;
-} 
+}
+
 void handler2(void) {
     val2 += rate2;
     Timers[t].setCompare2(val2);
     count2++;
-} 
+}
+
 void handler3(void) {
     val3 += rate3;
     Timers[t].setCompare3(val3);
     count3++;
-} 
+}
+
 void handler4(void) {
     val4 += rate4;
     Timers[t].setCompare4(val4);
     count4++;
-} 
+}
 
 void handler3b(void) {
     count3++;
-} 
+}
+
 void handler4b(void) {
     count4++;
-} 
+}
 
+__attribute__((constructor)) void premain() {
+    init();
+}
 
 int main(void) {
-    init();
     setup();
 
     while (1) {
diff --git a/examples/vga-leaf.cpp b/examples/vga-leaf.cpp
index d1c6d7d..9d9fce2 100644
--- a/examples/vga-leaf.cpp
+++ b/examples/vga-leaf.cpp
@@ -1,21 +1,21 @@
 /*
- Crude VGA Output
+ VGA Output
 
- Outputs a red and white leaf to VGA. This implementation is crude and noisy,
- but a fun demo. It should run most VGA monitors at 640x480, though it does
- not follow the timing spec very carefully. Real twisted or shielded wires,
- proper grounding, and not doing this on a breadboard are recommended (but
- it seems to work ok without).
+ Outputs a red and white leaf to VGA.  It should run most VGA monitors
+ at 640x480, though it does not follow the timing spec very
+ carefully. Real twisted or shielded wires, proper grounding, and not
+ doing this on a breadboard are recommended (but it seems to work ok
+ without).
 
- SerialUSB is disabled to get rid of most interrupts (which mess with timing);
- the SysTick is probably the source of the remaining flickers. This means that
- you have to use perpetual bootloader or the reset button to flash new 
- programs.
+ SerialUSB and SysTick are disabled to get rid of the most frequently
+ occurring interrupts (which mess with timing). This means that you
+ have to use perpetual bootloader mode or the reset button to flash
+ new programs.
 
  How to wire this to a VGA port:
-    D5 via ~200ohms to VGA Red     (1)
-    D6 via ~200ohms to VGA Green   (2)
-    D7 via ~200ohms to VGA Blue    (3)
+    D6 via ~200ohms to VGA Red     (1)
+    D7 via ~200ohms to VGA Green   (2)
+    D8 via ~200ohms to VGA Blue    (3)
     D11 to VGA VSync               (14)  (swapped?)
     D12 to VGA HSync               (13)  (swapped?)
     GND to VGA Ground              (5)
@@ -24,48 +24,71 @@
  See also:
   - http://pinouts.ru/Video/VGA15_pinout.shtml
   - http://www.epanorama.net/documents/pc/vga_timing.html
- 
+
  Created 20 July 2010
  By Bryan Newbold for LeafLabs
  This code is released with no strings attached.
- 
+
+ Modified 4 March 2011
+ By Marti Bolivar
+ Disabled SysTick, kept up-to-date with libmaple.
  */
 
+// FIXME: generalize for Native and Mini
+
 #include "wirish.h"
 
-#define LED_PIN 13
+#define LED_PIN BOARD_LED_PIN
 
-// Pinouts
-#define VGA_R 5     // STM32: B6
-#define VGA_G 6     // STM32: A8
-#define VGA_B 7     // STM32: A9
+// Pinouts -- you also must change the GPIO macros below if you change
+// these
+#define VGA_R 6     // STM32: A8
+#define VGA_G 7     // STM32: A9
+#define VGA_B 8     // STM32: A10
 #define VGA_V 11    // STM32: A6
 #define VGA_H 12    // STM32: A7
 
-// These low level macros make GPIO writes much faster
-#define VGA_R_HIGH (GPIOB_BASE)->BSRR = BIT(6)
-#define VGA_R_LOW  (GPIOB_BASE)->BRR  = BIT(6)
-#define VGA_G_HIGH (GPIOA_BASE)->BSRR = BIT(8)
-#define VGA_G_LOW  (GPIOA_BASE)->BRR  = BIT(8)
-#define VGA_B_HIGH (GPIOA_BASE)->BSRR = BIT(9)
-#define VGA_B_LOW  (GPIOA_BASE)->BRR  = BIT(9)
-#define VGA_V_HIGH (GPIOA_BASE)->BSRR = BIT(6)
-#define VGA_V_LOW  (GPIOA_BASE)->BRR  = BIT(6)
-#define VGA_H_HIGH (GPIOA_BASE)->BSRR = BIT(7)
-#define VGA_H_LOW  (GPIOA_BASE)->BRR  = BIT(7)
+// These low level (and STM32 specific) macros make GPIO writes much
+// faster
+#define ABSRR ((volatile uint32*)0x40010810)
+#define ABRR  ((volatile uint32*)0x40010814)
+
+#define RBIT 8                  // (see pinouts)
+#define GBIT 9
+#define BBIT 10
+
+#define VGA_R_HIGH *ABSRR = BIT(RBIT)
+#define VGA_R_LOW  *ABRR  = BIT(RBIT)
+#define VGA_G_HIGH *ABSRR = BIT(GBIT)
+#define VGA_G_LOW  *ABRR  = BIT(GBIT)
+#define VGA_B_HIGH *ABSRR = BIT(BBIT)
+#define VGA_B_LOW  *ABRR  = BIT(BBIT)
+
+#define ON_COLOR   BIT(RBIT)
+#define OFF_COLOR  (BIT(RBIT) | BIT(GBIT) | BIT(BBIT))
+
+// set has priority, so clear every bit and set some given bits:
+#define VGA_COLOR(c) (*ABSRR = c |                                      \
+                      BIT(RBIT+16) | BIT(GBIT+16) | BIT(BBIT+16))
+
+#define VGA_V_HIGH *ABSRR = BIT(6)
+#define VGA_V_LOW  *ABRR  = BIT(6)
+#define VGA_H_HIGH *ABSRR = BIT(7)
+#define VGA_H_LOW  *ABRR  = BIT(7)
 
 void isr_porch(void);
 void isr_start(void);
 void isr_stop(void);
 void isr_update(void);
 
-uint8 toggle;
 uint16 x = 0;       // X coordinate
 uint16 y = 0;       // Y coordinate
-uint8 v_active = 1; // Are we in the image?
+uint16 logo_y = 0;  // Y coordinate, mapped into valid logo index (for speed)
+bool v_active = true; // Are we in the image?
 
-// 1-bit!
-uint8 logo[18][16] = {
+const uint8 x_max = 16;
+const uint8 y_max = 18;
+uint32 logo[y_max][x_max] = {
     {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,},
     {0,0,0,0,0,0,1,1,1,0,0,0,0,0,0,0,},
     {0,0,0,0,0,1,0,0,0,1,0,0,0,0,0,0,},
@@ -99,9 +122,20 @@ void setup() {
     digitalWrite(VGA_H, HIGH);
     digitalWrite(VGA_V, HIGH);
 
+    // Fill the logo array with color patterns corresponding to its
+    // truth value.  Note that we could get more tricky here, since
+    // there are 3 bits of color.
+    for (int y = 0; y < y_max; y++) {
+        for (int x = 0; x < x_max; x++) {
+            logo[y][x] = logo[y][x] ? ON_COLOR : OFF_COLOR;
+        }
+    }
+
     // This gets rid of the majority of the interrupt artifacts;
+    // there's still a glitch for low values of y, but let's not worry
+    // about that. (Probably due to the hackish way vsync is done).
     SerialUSB.end();
-    SystemTick.end();
+    systick_disable();
 
     // Configure
     Timer4.pause(); // while we configure
@@ -120,14 +154,13 @@ void setup() {
     Timer4.attachCompare3Interrupt(isr_stop);
     Timer4.setCompare4(1);      // Could be zero I guess
     Timer4.attachCompare4Interrupt(isr_update);
-    
+
     Timer4.setCount(0);         // Ready...
     Timer4.resume();            // Go!
 }
 
 void loop() {
-    toggle ^= 1;
-    digitalWrite(LED_PIN, toggle);
+    toggleLED();
     delay(100);
 
     // Everything happens in the interrupts!
@@ -139,51 +172,59 @@ void loop() {
 void isr_porch(void) {
     VGA_H_HIGH;
     y++;
+    logo_y = map(y, 0, 478, 0, y_max);
     // Back to the top
-    if(y>=523) {
-        y=1;
-        v_active = 1;
+    if(y >= 523) {
+        y = 1;
+        logo_y = 0;
+        v_active = true;
         return;
     }
     // Other vsync stuff below the image
-    if(y>=492) {
+    if(y >= 492) {
         VGA_V_HIGH;
         return;
     }
-    if(y>=490) {
+    if(y >= 490) {
         VGA_V_LOW;
         return;
     }
-    if(y>=479) { 
-        v_active = 0;
+    if(y >= 479) {
+        v_active = false;
         return;
     }
 }
 
 // This is the main horizontal sweep
-void isr_start(void) {  
+void isr_start(void) {
     // Skip if we're not in the image at all
-    if(!v_active) { return; }
+    if (!v_active) {
+        return;
+    }
 
     // Start Red
     VGA_R_LOW;
     VGA_R_HIGH;
 
-    // For each "pixel" (really 20 or so screen pixels?) go red or white
-    for(x=0; x<32; x++) {
-        if(logo[y/28][x/2]) {
-            VGA_G_HIGH;
-            VGA_B_HIGH;
-        } else {
-            VGA_G_LOW;
-            VGA_B_LOW;
-        }
+    // For each "pixel", go ON_COLOR or OFF_COLOR
+    for(x = 0; x < 16; x++) {
+        // setting the color several times is just an easy way to
+        // delay, so the image is wider.  if you only do the following
+        // once, you'll be able to make the logo array a lot wider:
+        VGA_COLOR(logo[logo_y][x]);
+        VGA_COLOR(logo[logo_y][x]);
+        VGA_COLOR(logo[logo_y][x]);
+        VGA_COLOR(logo[logo_y][x]);
+        VGA_COLOR(logo[logo_y][x]);
+        VGA_COLOR(logo[logo_y][x]);
     }
 }
 
 // End of the horizontal line
 void isr_stop(void) {
-    if(!v_active) { return; }
+    if (!v_active) {
+        return;
+    }
     VGA_R_LOW;
     VGA_G_LOW;
     VGA_B_LOW;
@@ -194,8 +235,11 @@ void isr_update(void) {
     VGA_H_LOW;
 }
 
-int main(void) {
+__attribute__((constructor)) void premain() {
     init();
+}
+
+int main(void) {
     setup();
 
     while (1) {
diff --git a/examples/vga-scope.cpp b/examples/vga-scope.cpp
index 0265f9c..9c6dca5 100644
--- a/examples/vga-scope.cpp
+++ b/examples/vga-scope.cpp
@@ -1,34 +1,90 @@
-// Low-level, non-wirish demonstration of VGA
-//
-// Connect a microphone or something less to ANALOG_PIN
+/*
+  VGA Oscilloscope demo.
+
+  Connect a microphone or something like it to ANALOG_PIN (0V -- 3.3V
+  only; 0.2V -- 3.1V will probably look nicer); an attached VGA
+  monitor will display the signal roughly in real-time.
+
+  The thick blue line corresponds roughly to 0V.
+
+  This is a fairy crude hack, but it's fun to watch/toy around with.
+
+  SerialUSB and SysTick are disabled to get rid of the most frequently
+  occurring interrupts (which mess with timing). This means that you
+  have to use perpetual bootloader mode or the reset button to flash
+  new programs.
+
+  How to wire this to a VGA port:
+  D6 via ~200ohms to VGA Red     (1)
+  D7 via ~200ohms to VGA Green   (2)
+  D8 via ~200ohms to VGA Blue    (3)
+  D11 to VGA VSync               (14)  (swapped?)
+  D12 to VGA HSync               (13)  (swapped?)
+  GND to VGA Ground              (5)
+  GND to VGA Sync Ground         (10)
+
+  See also:
+  - http://pinouts.ru/Video/VGA15_pinout.shtml
+  - http://www.epanorama.net/documents/pc/vga_timing.html
+
+  This code is released into the public domain.
+ */
 
 #include "wirish.h"
+#include "systick.h"
+
+// FIXME generalize for Native and Mini
 
-#define LED_PIN 13
+#define LED_PIN     BOARD_LED_PIN
 #define ANALOG_PIN 18
-#define VGA_R 5 // B6
-#define VGA_G 6 // A8
-#define VGA_B 7 // A9
-#define VGA_V 11 // A6
-#define VGA_H 12 // A7
-#define VGA_R_HIGH (GPIOB_BASE)->BSRR = BIT(6)
-#define VGA_R_LOW  (GPIOB_BASE)->BRR  = BIT(6)
-#define VGA_G_HIGH (GPIOA_BASE)->BSRR = BIT(8)
-#define VGA_G_LOW  (GPIOA_BASE)->BRR  = BIT(8)
-#define VGA_B_HIGH (GPIOA_BASE)->BSRR = BIT(9)
-#define VGA_B_LOW  (GPIOA_BASE)->BRR  = BIT(9)
-#define VGA_V_HIGH (GPIOA_BASE)->BSRR = BIT(6)
-#define VGA_V_LOW  (GPIOA_BASE)->BRR  = BIT(6)
-#define VGA_H_HIGH (GPIOA_BASE)->BSRR = BIT(7)
-#define VGA_H_LOW  (GPIOA_BASE)->BRR  = BIT(7)
+
+// Pinouts -- you also must change the GPIO macros below if you change
+// these
+#define VGA_R 6     // STM32: A8
+#define VGA_G 7     // STM32: A9
+#define VGA_B 8     // STM32: A10
+#define VGA_V 11    // STM32: A6
+#define VGA_H 12    // STM32: A7
+
+// These low level (and STM32 specific) macros make GPIO writes much
+// faster
+#define ABSRR ((volatile uint32*)0x40010810)
+#define ABRR  ((volatile uint32*)0x40010814)
+
+#define RBIT 8                  // (see pinouts)
+#define GBIT 9
+#define BBIT 10
+
+#define VGA_R_HIGH *ABSRR = BIT(RBIT)
+#define VGA_R_LOW  *ABRR  = BIT(RBIT)
+#define VGA_G_HIGH *ABSRR = BIT(GBIT)
+#define VGA_G_LOW  *ABRR  = BIT(GBIT)
+#define VGA_B_HIGH *ABSRR = BIT(BBIT)
+#define VGA_B_LOW  *ABRR  = BIT(BBIT)
+
+#define COLOR_WHITE (BIT(RBIT) | BIT(GBIT) | BIT(BBIT))
+#define COLOR_BLACK 0
+#define COLOR_RED   BIT(RBIT)
+#define COLOR_GREEN BIT(GBIT)
+#define COLOR_BLUE  BIT(BBIT)
+
+#define BORDER_COLOR COLOR_BLUE
+
+// set has priority, so clear every bit and set some given bits:
+#define VGA_COLOR(c) (*ABSRR = c |                                      \
+                      BIT(RBIT+16) | BIT(GBIT+16) | BIT(BBIT+16))
+
+#define VGA_V_HIGH *ABSRR = BIT(6)
+#define VGA_V_LOW  *ABRR  = BIT(6)
+#define VGA_H_HIGH *ABSRR = BIT(7)
+#define VGA_H_LOW  *ABRR  = BIT(7)
 
 void isr_porch(void);
 void isr_start(void);
 void isr_stop(void);
 void isr_update(void);
 
-void setup()
-{
+void setup() {
     pinMode(LED_PIN, OUTPUT);
     pinMode(ANALOG_PIN, INPUT_ANALOG);
     digitalWrite(LED_PIN, 1);
@@ -38,104 +94,104 @@ void setup()
     pinMode(VGA_V, OUTPUT);
     pinMode(VGA_H, OUTPUT);
 
-    /* Send a message out USART2  */
+    // Send a message out USART2
     Serial2.begin(9600);
-    Serial2.println("Video time...");
+    Serial2.println("Time to kill the radio star...");
 
     // This gets rid of the majority of the interrupt artifacts;
-    // a SysTick.end() is required as well
+    // there's still a glitch for low values of y, but let's not worry
+    // about that. (Probably due to the hackish way vsync is done).
     SerialUSB.end();
-    
+    systick_disable();
+
     digitalWrite(VGA_R, 0);
     digitalWrite(VGA_G, 0);
     digitalWrite(VGA_B, 0);
-    digitalWrite(VGA_H,1);
-    digitalWrite(VGA_V,1);
-
-    timer_set_prescaler(4,0);
-    timer_set_mode(4, 1, TIMER_OUTPUTCOMPARE);
-    timer_set_mode(4, 2, TIMER_OUTPUTCOMPARE);
-    timer_set_mode(4, 3, TIMER_OUTPUTCOMPARE);
-    timer_set_mode(4, 4, TIMER_OUTPUTCOMPARE);
-    timer_set_reload(4, 2287);
-    timer_set_compare_value(4,1,200);
-    timer_set_compare_value(4,2,300);
-    timer_set_compare_value(4,3,2170);  // 2219 max...
-    timer_set_compare_value(4,4,1);
-    timer_attach_interrupt(4,1,isr_porch);
-    timer_attach_interrupt(4,2,isr_start);
-    timer_attach_interrupt(4,3,isr_stop);
-    timer_attach_interrupt(4,4,isr_update);
-
-    timer_set_count(4,0);
+    digitalWrite(VGA_H, 1);
+    digitalWrite(VGA_V, 1);
+
+    timer_pause(TIMER4);
+    timer_set_prescaler(TIMER4, 0);
+    timer_set_mode(TIMER4, 1, TIMER_OUTPUTCOMPARE);
+    timer_set_mode(TIMER4, 2, TIMER_OUTPUTCOMPARE);
+    timer_set_mode(TIMER4, 3, TIMER_OUTPUTCOMPARE);
+    timer_set_mode(TIMER4, 4, TIMER_OUTPUTCOMPARE);
+    timer_set_reload(TIMER4, 2287);
+    timer_set_compare_value(TIMER4, 1, 200);
+    timer_set_compare_value(TIMER4, 2, 250);
+    timer_set_compare_value(TIMER4, 3, 2170);  // 2219 max...
+    timer_set_compare_value(TIMER4, 4, 1);
+    timer_attach_interrupt(TIMER4, 1, isr_porch);
+    timer_attach_interrupt(TIMER4, 2, isr_start);
+    timer_attach_interrupt(TIMER4, 3, isr_stop);
+    timer_attach_interrupt(TIMER4, 4, isr_update);
+
+    timer_set_count(TIMER4, 0);
+    timer_resume(TIMER4);
 }
 
-int toggle = 0;
-uint16  x = 0;
 uint16 y = 0;
 uint16 val = 0;
-uint8 v_active = 1;
-GPIO_Port *portb = GPIOB_BASE;
+bool v_active = true;
+const uint16 x_max = 60;        // empirically (and lazily) determined
 
 void isr_porch(void) {
     VGA_H_HIGH;
     y++;
-    if(y>=523) {
-        y=1;
-        v_active = 1;
+    val = map(analogRead(ANALOG_PIN), 0, 4095, 0, x_max);
+    if(y >= 523) {
+        y = 1;
+        v_active = true;
         return;
     }
-    if(y>=492) {
+    if(y >= 492) {
         VGA_V_HIGH;
         return;
     }
-    if(y>=490) {
+    if(y >= 490) {
         VGA_V_LOW;
         return;
     }
-    if(y>=479) {    // 479
-        v_active = 0;
+    if(y >= 479) {
+        v_active = false;
         return;
     }
 
 }
 
 void isr_start(void) {
-    if(!v_active) { return; }
-    VGA_R_HIGH;
-    VGA_R_HIGH;
-    VGA_R_HIGH;
-    VGA_R_LOW;
-    //delayMicroseconds(2);
-    //gpio_write_bit(GPIOA_BASE, 8, 1); // VGA_G
-    for(x=0; x<(val>>6); x++) {
-        }
-    VGA_B_HIGH;
-    VGA_G_HIGH;
-    VGA_G_LOW;
-    VGA_B_LOW;
-    //VGA_R_HIGH;
-    //val = (val + analogRead(ANALOG_PIN))/2;
-    val = analogRead(ANALOG_PIN);
-
+    if (!v_active) {
+        return;
+    }
+    VGA_COLOR(BORDER_COLOR);
+    for (int x = 0; x < val; x++) {
+        VGA_COLOR(COLOR_BLACK);
+    }
+    VGA_COLOR(COLOR_WHITE);
+    VGA_COLOR(COLOR_BLACK);
 }
+
 void isr_stop(void) {
-    if(!v_active) { return; }
-    VGA_R_LOW;
-    VGA_G_LOW;
-    VGA_B_LOW;
+    if (!v_active) {
+        return;
+    }
+    VGA_COLOR(COLOR_BLACK);
 }
+
 void isr_update(void) {
     VGA_H_LOW;
 }
 
 void loop() {
-    //val = analogRead(ANALOG_PIN);
+    toggleLED();
+    delay(100);
 }
 
+__attribute__((constructor)) void premain() {
+    init();
+}
 
 int main(void) {
-    init();
     setup();
 
     while (1) {
diff --git a/libmaple/adc.c b/libmaple/adc.c
index cd71118..a464746 100644
--- a/libmaple/adc.c
+++ b/libmaple/adc.c
@@ -23,6 +23,8 @@
  *****************************************************************************/
 
 /**
+ * @file adc.c
+ *
  * @brief Analog to digital converter routines
  *
  * IMPORTANT: maximum external impedance must be below 0.4kOhms for 1.5
@@ -30,7 +32,7 @@
  *
  * At 55.5 cycles/sample, the external input impedance < 50kOhms.
  *
- * See stm32 manual RM008 for how to calculate this.
+ * See STM32 manual RM0008 for how to calculate this.
  */
 
 #include "libmaple.h"
diff --git a/main.cpp.example b/main.cpp.example
index 8fc522a..3ae114b 100644
--- a/main.cpp.example
+++ b/main.cpp.example
@@ -27,7 +27,7 @@ void loop() {
 }
 
 // Force init to be called *first*, i.e. before static object allocation.
-// Otherwise, statically allocated object that need libmaple may fail.
+// Otherwise, statically allocated objects that need libmaple may fail.
 __attribute__(( constructor )) void premain() {
     init();
 }
diff --git a/wirish/boards.h b/wirish/boards.h
index 989eea1..ee93c5a 100644
--- a/wirish/boards.h
+++ b/wirish/boards.h
@@ -133,7 +133,7 @@ typedef struct PinMapping {
         /* D23/PC15 */
         {GPIOC_BASE, 15, ADC_INVALID,              0, EXTI_CONFIG_PORTC, TIMER_INVALID, TIMER_INVALID},
         /* D24/PB9 */
-        {GPIOB_BASE,  9, ADC_INVALID, TIMER4_CH4_CCR, EXTI_CONFIG_PORTB, TIMER_INVALID, TIMER_INVALID},
+        {GPIOB_BASE,  9, ADC_INVALID, TIMER4_CH4_CCR, EXTI_CONFIG_PORTB, TIMER4, 4},
         /* D25/PD2 */
         {GPIOD_BASE,  2, ADC_INVALID,              0, EXTI_CONFIG_PORTD, TIMER_INVALID, TIMER_INVALID},
         /* D26/PC10 */
diff --git a/wirish/main.cxx b/wirish/main.cxx
index f0158f8..dd5e296 100644
--- a/wirish/main.cxx
+++ b/wirish/main.cxx
@@ -1,4 +1,4 @@
-/* *****************************************************************************

+/******************************************************************************

  * The MIT License

  *

  * Copyright (c) 2010 LeafLabs LLC.

@@ -20,16 +20,15 @@
  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN

  * THE SOFTWARE.

- * ****************************************************************************/

+ *****************************************************************************/

 

 // Force init to be called *first*, i.e. before static object allocation.

-// Otherwise, statically allocated object that need libmaple may fail.

+// Otherwise, statically allocated objects that need libmaple may fail.

  __attribute__(( constructor )) void premain() {

     init();

 }

 

-int main(void)

-{

+int main(void) {

     setup();

 

     while (1) {